Tender For Construction Of Craft Community Centre At Chatapora Pulwama.
Tender Value
1.82 Crore
Estimated cost
Bid Submission
19 Oct 2026
4 days left
EMD
3.64 Lakhs
Bank guarantee accepted
Document Fee
3000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pulwama → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Craft Community Centre At Chatapora Pulwama.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 15-Oct-2026 | Date | Date | 19-Oct-2026 |
| 2 | 15-Oct-2026 | Correction | Technical Bid | 19-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift surplus excavated soils as directed, including all leads, lifts etc All kinds of soil |
| 2 | Providing & laying of stone soling hand packed in foundation trenches |
| 3 | Providing and laying in position cement concrete of specified grade M-7.5 excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) Including all sorts of Carriage |
| 4 | Providing and laying in position cement concrete of specified grade M-15 excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) |
| 5 | Suplying and filling plinth with fine sand under floors inclduing watering, ramming consolidating and dressing complete. Including all sorts of Carriage |
| 6 | Suplying and filling plinth with GSB under floors inclduing watering, ramming consolidating and dressing complete. Including all sorts of Carriage |
| 7 | Filling available excavated earth ( excluding rock) in trenches, plinth sides of foundation etc. layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering upto 1.5 mtr Including all leads, lifts etc |
| 8 | Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads,having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and reinforcement includingcost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer- in - charge. Note: - Cement content considered in this item is @ 330 kg/ cum. Excess/ less cement used as per design mix is payable/ recoverable separately payable/removable seperately Including all sorts of Carriage a) All works upto plinth level |
| 9 | b) All works above plinth level |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for : a)Foundations, footings, bases of columns, etc. for mass concrete |
| 11 | b)Walls (any thickness) including attached plinth and string courses etc.pilasters, butteresses, |
| 12 | c)Suspended floors, roofs, landings, balconies and access platform |
| 13 | d)Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 14 | e) Columns, Pillars, Piers, Abutments, Posts and Struts |
| 15 | f) Stairs, (excluding landings) except spiral-staircases |
| 16 | g) Edges of slab and breaks in floors and walls under 20 cm wide |
| 17 | Steel reinforcement for R.C.C. for Footing, Columns , Beams, Slabs etc including straightening, cutting, bending, placing in position and binding all complete including welding etc of grade FE-500 D Thermo-Mechanically Treated bars |
| 18 | SStructural steel work in built up sections, trusses and framed work,including cutting, hoisting, fixing in position and applying a priming coat ofapproved steel primer all complete. Welded |
| 19 | Providing and Fixing of Anchor Bolts of 25mm dia of average length 600mm with nuts and washers including grouting complete job. |
| 20 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 fine sand) Including all sorts of Carriage |
| 21 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 22 | 6 mm thick cement plaster in 1:3 mix of cement mortar in ceiling with curing. Including all carrages complete upto floor-V level |
| 23 | 15 mm thick cement plaster in 1:4 mix of cement mortar in walls with curing. Including all carrages complete upto floor-V level |
| 24 | Providing and fixing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):(First class KAIL wood) |
| 25 | Providing and fixing 35 mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Including -Butt hinges and necessary screws First Class Kail Wood |
| 26 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge 30mm thick : (First Class Kail Wood) |
| 27 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st classhard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws |
| 28 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). Including Firms in position |
| 29 | Providing and fixing 5mm thick panels of plain glass for fixed glazing panels/ shutters (only panel area to be measured) including cost of teak wood beadings of required size complete |
| 30 | Providing and fixing hardware fittings of approved brand and of required type ( anodised Aluminium ) as approved by Engineer incharge. complete as per the specifications . A)Tower bolts 100mm (windows) |
| 31 | b) Handle 100mm (window) |
| 32 | c) I-Hooks 150mm |
| 33 | d) L-drop 250mm |
| 34 | e) Tower bolts 150mm (doors) |
| 35 | f) Handle 125mm (door) |
| 36 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias , skerting,risers etc nd similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levelsGranite of any colour or shade |
| 37 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete (Size of tile 600x600 mm) |
| 38 | Providing and fixing 1st quality ceramic glazed floor tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 39 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 40 | Chequerred terrazo tiles 22mm thick with graded marble chips of size upto 6mm in floors jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 Fine sand)Light shade using white cement |
| 41 | Providing and applying white cement based putty of 2 mm thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 42 | Wall / ceiling Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 43 | Applying priming coatWith ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 44 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work |
| 45 | Providing and Fixing of 50mm dia stainless steel railing of 304 grade of hallow tube 1.6 mm thick of Jindal/Salem make or equivalent including welding and fixing with stainless steel machine screws for making required size and shape, buffing etc. Complete and fixing stainless steel balusters upto 900 mm height, newel post 1050 not less then hight 1050mm and S S tubes, three in one installed horizontally including cutting, welding, grinding to required shape and size by required steel dash fasteners, nuts, bolts, screws ,etc. in floors and treads including providing SS shoe at each balusters complete as per architectural drawings and as per the directions of engineer incharge including cutting of granite/marble floors and fastening with lead grouting if required, complete in all respects. |
| 46 | Finishing walls with textured exterior paint of required shade on New work (two or more coats applied @ 3.28 liter/10sqm) over and including base coat of exterior primer applied @ 2.20kg/10sqm |
| 47 | Providing and fixing plain eves boarding (300mm x 40mm ) first class kal wood fixed with screws etc, including all carraiges .All job completed |
| 48 | P/F of 12mm thick T&G planks made of imported wood panneling (New zealand pine or equivalent) for walls,soffits & Ceiling. including cost of necessary adhesive, budloo wood backing & cost of nails etc.complete job. as approved by Engineer-in-charge (including cost of all material and carriages etc upto site of work complete). including polishing |
| 49 | Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G. I. limpet and bitumen washers complete.0.63mm thick with zinc coating not less than 275gm/m2 |
| 50 | Providing valleys of 90cm wide overall in plains G.S. sheets fixed with polymer coated J. or L. hooks, bolts and nuts 8 mm dia G I. limpet and bitumen washers complete.1.60mm thick with zinc coating not less than 350gm/m2 |
| 51 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275 gram/m2 |
| 52 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete Including all sorts of carriage |
| 53 | Supplying and fixing rolling shutters of approved make, made of requiredsize M.S. laths, interlocked together through their entire length and jointedtogether at the end by end locks, mounted on specially designed pipe shaftwith brackets, side guides and arrangements for inside and outside lockingwith push and pull operation complete, including the cost of providing andfixing necessary 27.5 cm long wire springs manufactured from high tensilesteel wire of adequate strength confirming to IS:4454 part-1 and M.S. topcover of required thickness for rolling shutters.80x1.25 mm M.S. laths with 1.25 mm thick top cover |
| 54 | Providing and fixing ball bearing for rolling shutters. |
| 55 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift surplus excavated soils as directed, within a lead of 50 m. All kinds of soil |
| 56 | Providing & laying of stone soling hand packed in foundation trenches Including all sorts of carriag |
| 57 | Providing and laying in position cement concrete of specified grade M-7.5 excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) Including all sorts of carriage |
| 58 | Providing and laying in position cement concrete of specified grade M-15 excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) All works upto plinth level |
| 59 | Centering and shuttering including strutting, propping etc. and removal of form for : a)Foundations, footings, bases of columns, etc. for mass concrete Foundations, footings, bases of columns, etc. for mass concrete |
| 60 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 fine sand) Including all sorts of carriage |
| 61 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 62 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.n gratings, frames, guard bar, ladder, railings, brackets, gates andsimilar works. |
| 63 | Providing and laying 60mm thick factory made cement concreteinterlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thickcompacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge. |
| 64 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 4/6 litre low level white flushing cistern, including flush pipe, with manually controlled device with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. Makes:-Jaquar/Hindware/Cera |
| 65 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass Centre Hole Basin Mixer(01 Nos), 32 mm C.P. brass waste of standard pattern(01 Nos), Pedestal (01 Nos) including painting of fittings and brackets, cutting and making good the walls wherever required. Makes:-Jaquar/Hindware/Cera Ref: Hindware Cat No. 10103 Wash Basin,11032(Pedestal),280010SCP(Basin Mixer),850001(Waste Coupling))/ Jaquar Cat No. FNS-WHT-40801,FNS-WHT-40301(Pedestal),CON167KNB(Basin Mixer),ALD 705(Waste Coupling)/Cera S2040104(Wash Basin),S2090101(Pedestal),F2002461(Basin Mixer),F8050101(Waste Coupling) |
| 66 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm |
| 67 | Providing and fixing toilet paper holder with Flap made out of C.P Brass Makes:- Jaquar/Hindware/Cera Ref: Hindware Cat No. F880003/ Jaquar( ACN 1153N)/Cera F5007110 C.P Brass |
| 68 | Providing and fixing C.P Brass Soap Dish. Makes:- Jaquar/Hindware/Cera Ref:Hindware Cat No. F880011)/F5003106,Jaquar 1131 |
| 69 | Providing and fixing health faucet with hose pipe for european water closet complete in all respect of approved quality Makes:- Jaquar/Hindware/Cera Ref: Hindware Cat No. F160023 /Jaquar(ALD563)/Cera F8030101 |
| 70 | Providing and fixing CP brass towel rail complete with CP brackets fixed to wooden cleats with CP brass screws .Makes:- Jaquar/Hindware/Cera Ref: Hindware Cat No. F880005/Jaquar(ACN 1111NM)/Cera F5003103 |
| 71 | Providing and fixing C.P brass bib cock with Auto closing System with Built in control Cock with Wall Flange of approved quality Makes:- Hindware/Jaquar/Cera Ref: Hindware Cat No. F310002 ACP/Jaquar(PRS 043)/Cera F9020151 15 mm nominal bore |
| 72 | Providing and fixing C.P. brass angle valve for basin mixer and geyser/cisterns points. Makes:- Hindware/Jaquar/Cera Ref: Hindware Cat No. F280004/Jaquar(CON 053)/Cera F2002201 15 mm nominal bore |
| 73 | Providing and fixing C.P. brass Single Lever Basin Mixer with 450 mm braided connection pipe. Makes:- Hindware/Jaquar/Cera 15 mm nominal bore |
| 74 | Providing and fixing C.P. brass bottle trap for wash basin including CP waste fittings complete 32 mm dia complete in all respect of approved quality. Makes:-Jaquar/Hindware/Cera Ref: Hindware Cat No. F850072 /Jaquar(ALD 769L 250x190)/ Cera F8060301 |
| 75 | Providing and fixing C.P. brass Wall Mixer Makes:- Hindware/Jaquar/Cera Ref: Hindware /Jaquar /Cera |
| 76 | Providing and fixing PP Based soil, waste and vent pipes (Silencio as per DIN4109) suitable to rubber ring joints , which includes bends, rubber ring, jointing, junctions, clean out plug , cowls, offsets, collar, M.S holder-bat clamps, access pieces, trap of self cleansing design .etc. complete including jointing. a) 110 mm dia. PP SWR socketed pipe with rubber ring joints . |
| 77 | b) 75 mm dia. PP SWR socketed pipe with rubber ring joints . |
| 78 | c) 160 mm dia. PP SWR socketed pipe with rubber ring joints. |
| 79 | Providing and Fixing of Floor Traps 110 mm with double chrome plated Cover one Grated and one closed and all other fittings required.Makes:- Astral/SFMC/Finolex |
| 80 | PE - AL - PE COMPOSITE PRESSURE PIPES Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-ALPE) Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80 0C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer in charge. Concealed work, including cutting chases and making good the walls etc. a) 1620 (20 mm OD) pipe |
| 81 | b) 2025 (25 mm OD) pipe |
| 82 | Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-ALPE) Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80 0C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer in charge. Internal work (Exposed on wall) a) 2025(25 mm OD) pipe |
| 83 | b)2532 (32 mm OD) pipe |
| 84 | c) 4050(50 mm OD) pipe |
| 85 | Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-ALPE) Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80 0C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer in charge. External work a) 4050 (50 mm OD ) pipe |
| 86 | Providing and Fixing of Thermal Insulation for Hot Water Lines made out of Flexible Elastomeric Foam of Closed Cells Structure Having a Thermal Conductivity of 0.038 W/m.K at 200 Deg C water Vapour Permeability of Cu.m 5000 as Required including accessories i.e Adhesives/Tape on all Joints as per the satisfaction of the Engineers Incharge. a) 1620 (20 mm OD) pipe |
| 87 | b) 2025 (25 mm OD) pipe |
| 88 | Providing and fixing unplasticised PVC connection pipe with brass unions: a) 45 cm length |
| 89 | 15 mm nominal bore Cutting holes upto 30x30 cm in walls including making good the same with common burnt clay F.P.S.(non modular) bricks |
| 90 | Constructing masonary chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement: 4 coarse sand) with C.I. surface box 100x100x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cenment:5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement :3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design With F.P Bricks. |
| 91 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m(For All Kinds of Soil) |
| 92 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m |
| 93 | Providing and fixing PP Based soil, waste and vent pipes (Silencio as per DIN4109) suitable to rubber ring joints , which includes bends, rubber ring, jointing, junctions, clean out plug , cowls, offsets, collar, M.S holder-bat clamps, access pieces, trap of self cleansing design .etc. complete including jointing.for Under Ground Sewage System in the Existing Excavated Trench. Makes:-Astral/SFMC/Finolex a) 110 mm dia. PP SWR socketed pipe with rubber ring joints . |
| 94 | b) 160 mm dia. PP SWR socketed pipe with rubber ring joints. |
| 95 | Providing and filling sand of grading zone V or coarser grade all-round the Composite Pipes in external work & lay dry brick over sand layer to protect the pipe. a) 110 mm dia. PP SWR socketed pipe with rubber ring joints . |
| 96 | b) 160 mm dia. PP SWR socketed pipe with rubber ring joints. |
| 97 | Supply, Installation of PVC Gully Trap of Size 110 mm Makes:-Astral/SFMC/Finolex |
| 98 | Making soak pit 2.5 m diameter 3.0 metre deep with 45x45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8 long complete as per standard design. With F.P.S. bricks |
| 99 | Constructing septic tank, of size 5.0mx2.5mx1.4m approx. height(Height to be fixed as per site requirement i.e. below invert level of last manhole (1.5 m water depth) , in B/W, 350/230 mm thick ( minimum) walls and 400 mm |
| 100 | Providing & fixing full way lever operated forged brass ball valve of brass body with forged brass hard chrome plated steel ball tested to a pressure not less than 16 Kg / sqcm with threaded / flanged joints complete with nuts, bolts, gaskets, washers etc. Makes:-Neu/Honeywell a) 50 mm Diameter |
| 101 | 32 mm Diameter |
| 102 | 25 mm Diameter |
| 103 | Providing and fixing on wall 35 LTRS Electric Geyser with ABS Body. Makes:- Bajaj/Crompton/Jaquar/Hindware |
| 104 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable lockingarrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank. |
| 105 | Wiring for the following light points &exhaust fan points with 1.5Sqmm PVC insulated copper wires of approved make in concealed or surface mounted PVC conduit including providing and fixing of 6 Amp singe pole switch of approved quality in modular grid plate and Gi box and Earthing of fixtures and the outlet box with 1.5sq mm PVC insulated copper wire One light controlled by 6 Amp Switch |
| 106 | wiring for 240 volts single phase and neutral 25 amps switched socket outlet with 4 sq mm PVC insulated copper wire in concealed or surfaced mounted PVC conduct including providing and fixing of 25 amp 3 pin switched socket approved make with modular grid plate and earthing the third pin of socket outlet with 1 sqmm PVC insulated copper wire completes as required |
| 107 | Wiring for ceiling fan wall fan point same as above in item No 01 but controlled by electronic stepped regulator and 5ainp control switch |
| 108 | Wiring for 230v ac, 5pin 5/6 amps switched socket outlets for light duty power with 230v ac 5/6amps, SP switch and socket, on same modular grid plate mounting with 2x2.5sqmm stranded copper conductor insulated 1100v grade wire in 25mm dia, 1.6mm thick rigid MS conduit/Pvc with earthing of 3rd pin by 1/1.5 sq mm stranded copper conductor insulated green 1100v grade wire with lug complete. |
| 109 | Wiring for circuits for light fan/exhaust fans/AC, Wiring for circuits for light fan/exhaust fans/AC, etc. with following size PVC insulated 1100v Grade multi strand copper conductor wire, green insulated muti strand copper conductor for earth wire in the existing conduits complete including connections all the three wires for phase, neutral and earth shall have to be taken to switch board and then distributed further. (Without Conduits) a) 2x2.5sqmm =+ 1x1.5sqmm |
| 110 | b) 2x1.5sqmm |
| 111 | Supplying installation testing and commissioning of pre wired industrial socket including 32-amp SP MCB complete with connection as required |
| 112 | Supplying and fixing of following size Dia PVC conduit including cost of junction boxes, bends,Elbows, sockets, tee etc. laying in slab cutting.chases and making good or surface mounted Including all foxing hardware as required. a) 25mm Dia. |
| 113 | b) 35mm dia |
| 114 | Supplying and laying of CAT 6 wire of approved make |
| 115 | Supplying and fixing of internet points complete connection as required |
| 116 | Supplying installation testing and commissioning of pre wired 15 watt led light complete with Connection as required |
| 117 | Supplying installation testing and commissioning of pre wired celling fan of approved make complete with connection as required |
| 118 | Supplying installation testing and commissioning of exhaust fan completes with connection as required 200mm |
| 119 | Supplying and installation testing and commissioning following ways of TPN DB box 8 Way TPN DB board |
| 120 | Supplying and fixing of following size MCB's complete with connection as required make Schneider a) 6-32-amp SP |
| 121 | b) 40 Amp DP |
| 122 | Design, fabrication, assembling, supply. installation, testing and commission of LT Sub main panel for healing (indoor type) suitable to 415V3 phase 4 wire power supply system panel shall be fabricated out of 1.6rnn thick CRC sheet powder coated free stand having front doors mounted on angle iron pedestal and necessary wiring and other panel accessories comparing of the following: Incomers a) 200 Amp 4 pole 35KA MCCB (ABB) b) Spreaders links & phase barriers c) 100 Amp MCCB 02 No AluBAS BAR d) Digital multifunction meter e) CT'S coils f) Indication lamps Outgoings a) 100 Amnp sp MCCB 25KA (ABB) spreader links and phase barriers 100 Amp changeover |
| 123 | Wiring for sub main circuits with following size PVC insulated 1100v Grade multi strand copper conductor wire green insulated multi strand copper conductor for earth wire in the existing conduits complete including connections all the three wires for phase, neutral and earth shall have to be taken to distribution board from main penal board. (Without Conduits) A 4x10 Sqmm2x6 Sqmm |
| 124 | 4x6+2x4 Sq mm |
| 125 | 2x6+1x2.5 Sq mm for AC circuit |
| 126 | Supplying laying of following 1100-volt grade XLPE insulated PVC sheeted aluminum conductor armored cable BS per specification in existing trenches cable trays ducts over bed of sand clamps including fixing bolts connecting testing and commissioning 50 sqmm 3,5 core |
| 127 | supply. installation, testing and commission of chemical earthing complete as required |
| 128 | Supplying, installation, testing & commissioning of 2 Zone fire alarm panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required. |
| 129 | Supplying, installation, testing & commissioning of smoke detector with built-in LED and mounting base complete with all connections etc. as required. |
| 130 | Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required. |
| 131 | Supplying, installation, testing & commissioning of manual call boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required |
| 132 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. a) 20 mm dia |
| 133 | Wiring for circuit/ sub main wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2 core cable |
| 134 | SITC of Dry Type Co2 Type Fire Extinguisher 4.5 Kg |
| 135 | SITC of ABC Type Fire Extinguisher 9.0 Kg |
| 136 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required a) 80mm dia |
| 137 | b) 150mm dia |
| 138 | Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required Single headed Gunmetal |
| 139 | Supplying and fixing orifice plate made out of 6 mm thick Stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required. |
| 140 | Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : |
| 141 | Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following asr equired. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipments on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. |
| 142 | Supplying and fixing of2 way fire brigade inlet connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : |
| 143 | Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required. |
| 144 | Providing and placing 5 layer polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet, overflow pipes with all fittings complete job |
| 145 | Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required : |
| 146 | Providing and fixing Weather proof hose cabinets for yard hydrant fabricated from 16 g MS sheet with full glass door and locking arrangement, suitable to accommodate one hydrant valve, 2 nos.15m long hose, 1 No branch pipe and one fireman's axe. The cabinet shall be painted with one coat of primer and finished stove enameled \\"Fire Red\\", \\"Fire Hose\\" written on front including suitably mounted on a raised masonry platform as required. (Approx 0.75mx0.6 mx 0.25 m). |
| 147 | Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520 b) Suitable HP squirrel cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. As required. (d) Suitable cement concrete foundation duly plastered and with anti vibration pads. 450 lpm at 35 m Head |
| 148 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : a) 150mm dia |
| 149 | b) 80 mm dia |
| 150 | Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : a) 150 mm dia |
| 151 | Supplying installation testing and commissioning of electric penal with cables earthing etc complete as per site requirement |
| 152 | Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange. a) 150 mm dia |
| 153 | Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. |
| 154 | Providing, installation, testing and commissioning of Pressure Gauges Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 15, 2026
11:30 IST
Tender Published
Tender notice published.
Today
Oct 19, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 days
Oct 19, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 daysOct 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender