Tender For Providing Bore Well Construction Of 96 Tngrhs Flats (S+4 Floors) (B Type - 12,C Type 60 Flats, D Type 24 Flats) At Marur Village , Thalavadi, Erode Dst.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
15 Oct 2026
11 days left
EMD
9210
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Erode → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Bore Well Construction Of 96 Tngrhs Flats (S+4 Floors) (B Type - 12,C Type 60 Flats, D Type 24 Flats) At Marur Village , Thalavadi, Erode Dst.
BOQ
| Sl. No. | Item Description |
| 1 | Drilling 6\\" (150mm) dia vertical bore well clear internal dia of bore should not be less than 6\\" to the entire depth of bore well in all type of soils including hard rock area as directed by the Dept. officers including labour charges for inserting casing pipes assembling in the drilled hole jointing and inserting charges for the casing pipes etc and transporting charges for teh rig by supporting vehicle from one place to anther place etc complete in all respects as directed by the Dept officers. |
| 2 | Upto 60 m Depth ending below ground level |
| 3 | From 60 m upto 90 m Depth ending from ground level |
| 4 | From 90 m upto 120 m Depth ending from ground level |
| 5 | From 120 m upto 150 m Depth ending from ground level |
| 6 | From 150 m upto 180 m Depth ending from ground level |
| 7 | Supply of fixing of 6\\" dia PVC end cap of suitable cover for 6\\" dia bore well confirming to IS Specifications etc complete in all respects as directed by the dept, officers |
| 8 | Supply and delivery of 150mm OD PVC casing pipe as per specification with ISI mark including of all taxes etc., complete. |
| 9 | Supplying and fixing 4.0 sqmm PVC flat submesible 3 core copper flat cable of approved quality with ISI mark of confirming ISI specification including cost of cable, conveyance and fixing charges etc., complete in all respects. And as directed by the departmental officer. |
| 10 | Labour charge for erection of submersible pumpsets in Sump. Including fixing and joining and submersible with proper clamps upto the starrer to the required depth walls errection clamps pressure gauge upto the exterior wall of pumproom and errection of panel board cornisisting of PPIC sutches starters voltmeter. ammeter, 3 pilot (indicating) lamps capacitor, and laying and joining the cable and twir: earthing as per IE rules etc., complete and testing the pumps on trial runof 10 days. (for 5 HP submersible pumpset) |
| 11 | submersible motor is a squirred case wet type water cooled fully rewindable motor 3 phase at 400 to 415 volts. Pump:- submersible pump are ralial flow impellor design impellers are engineering poymor no of stages. total head rarage:- 175 metre discharge at - 1.30 Lps Delivery size: 50mm dia G.I. delivery line. The brand name and quality of submercible pump set should be furnished. |
| 12 | Supplying and fixing of MS fabricated DOL panel control Board with auto-starter of wail mounting type with ISI mark with ammeter voltmeter including lamps ON/OFF push button with necessary connections and, relay suitable for the above and as directed by the departmental officer for following compressors & Pump sets. |
| 13 | Supplying and fixing of Change over switch-63 Amps. Three phase 500V 4 pole change over switch cost of all materials etc., all complete and as directed by the departmental officers |
| 14 | Construction of INSPECTION CHAMBER following clear sizes including earth work excavation, CC 1:5:10 of 10 cm thick and brick work in Cement Mortar 1:5 [One cement and Five sand) using best quality of Clay burnt Bricks of size 9\\" x 43/8\\" x 23/4\\" with Class designation of 7.5 and Plastering with Cement Mortar 1:3 [One Cement and Three Plastering Sand] 12 mm thick to inner and outer sides and wearing coat 1:3:6 [One Cement, Three crushed stone sand and Six Aggregate] 15 cm thick and covered with precast slab 5 cm thick etc., complete complying as directed by the departmental officers as per standard specification. |
| 15 | Supplying and fixing in position the following GI Specials of heavy type and approved quality and good variety excluding fixing charges but including necessary cutting and threading of GI pipes, jointing the Gl specials and painting with two coats with good variety and best quality synthetic enamel paint over a coat of red oxide primer and jointing the specials with pipe line using shellac etc., complete complying with standard specification. (The GI specials should be got approved by the Executive Engineer concerned before use on works.) |
| 16 | 50mm GM Non Return Valve |
| 17 | 1\\" Nylon Rope |
| 18 | HDPE Pipe |
| 19 | GST @ 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysOct 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender