Tender For Renovation Of Kanniyambalam Cut Stone Mandapam Belongs To Arulmighu Bhagavathy Amman Temple At Kanniyakumari In Agasteeswaram Taluk Of Kanniyakumar District
Tender Value
17.56 Lakhs
Estimated cost
Bid Submission
23 Oct 2026
16 days left
EMD
17570
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kanniyakumari → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Kanniyambalam Cut Stone Mandapam Belongs To Arulmighu Bhagavathy Amman Temple At Kanniyakumari In Agasteeswaram Taluk Of Kanniyakumar District
BOQ
| Sl. No. | Item Description |
| 1 | Dismantle the RR masonry in lime mortar and stack it carefully for reuse inside the premisses ,including cost and conveyance of all labour charges etc complete.as directed by the department officer etc. |
| 2 | Dismantle the damaged plain cement concrete and removing the debris to outside the premisses ,including cost and conveyance of all labour charges etc complete.as directed by the department officer etc. |
| 3 | Dismantle the damaged brick work in lime mortar and removing the debris to outside the premisses ,including cost and conveyance of all labour charges etc complete.as directed by the department officer etc. |
| 4 | Dismantle the damaged ventilator and removing the debris to outside the premisses ,including cost and conveyance of all labour charges etc complete.as directed by the department officer etc. |
| 5 | Racking out the old lime plastering and removing the debris to outside the temple premisses ,including cost and conveyance of all labour charges etc complete.as directed by the department officer etc. |
| 6 | Restoration by providing Water wash and appropriate methodology to restore theoriginalities of the existing Granite structures inclusive of necessary scaffolding charges, conveyance and all hire charegs for all tools and plants and clearing the site after completeion of work etc., complete. |
| 7 | Pointing in Cement mortar 1:3 mix 20mm deep for cut stone joints including special such brush, watering, coloring etc labour charges complete |
| 8 | Earth work open excavation by manual means in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the excavated earth with a lead of 10 mts. within the compound in places shown by the departmental officers and clearing and levelling the site, etc., complete complying with standard specification and as direct- ed by the departmental officers. |
| 9 | Cement Concrete 1:5:10 (One Cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 10 | Plain Cement Concrete 1:2:4 (one cement, two crushed stone sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers. |
| 11 | Brick work in cement mortar 1:5 using country bricks of size 83/4\\"x41/4\\"x23/4\\", including cost and conveyance of all materials into the site and all labour charges etc complete with standard specification as directed by the department officers etc,. |
| 12 | Plastering the surface of walls with Cement Mortar 1:4 (One cement and Four plastering sand), 20mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc., complete complying with standard specification and as directed by the departmental officers. |
| 13 | Plastering the surface of walls with Cement Mortar 1:4 (One cement and Four plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc., complete complying with standard specification and as directed by the departmental officers. |
| 14 | Supplying and fixing of country wood glazed ventilater with outer frames of size 4 x 2 1/2 and glass panel of 4mm thick including all material and all labour charges etc., complete complying with standard specification and as directed. |
| 15 | Painting the wall two coats with approved weather proof Exterior Emulsion paint over one primer coat on cement plastered wall surface ect., complete complying with standard specification and as directed by the departmental officers. |
| 16 | Painting Old wood work with Two coat of synthetic enamel ready mixed paint of approved quality and colour in all floors etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Departmental officilas before use on works.) |
| 17 | Painting new wood work with two finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by thedepartment officer before use on works.) |
| 18 | Wiring with 2 x 1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor cable of 1100 V grade insuitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colour with continuous earth wire connection of 1.5 sq.mm copper wire for open PVC light point / fan point (for electronic regulator) |
| 19 | Wiring with 2 x 1.5 sq.mm PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade insuitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113 mm TW switch box for 5 A 3 pin non inter locking Wall socket with 5 A flush type switch with painting of suitable colour with continuous earth wire connection of 1.5 sq.mm copper wire for open PVC plug point |
| 20 | Wiring with 2 x 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor cable of 1100 V grade insuitable pipe on wall and ceiling with PVC accessories with 150 mm x 100 mm x 113 mm TW switch box for 15 A 3 pin non interlocking wall socket with 15 A flush type switch with painting of suitable colour with continuous earth wire connection of 4 sq.mm copper wire for open PVC power plug point. |
| 21 | Supply and fixing of 4 Feet LED 20 W Fitting with LED 20 W tube (Lower End) complete with TW round blocks on wall or ceiling with PVC unsheathed FRLS Copper leads from terminals to the fitting. |
| 22 | Supply and fixing of 30W LED street light fitting with LED (Lower end) with 25mm dia. GI pipe (class B) with 1 no.25mm dia GI bend complete on the existing post/ on wall with PVC unsheathed FRLS copper leads with MS clamps and with painting |
| 23 | Supply and run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade insuitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 4 sq.mm copper wire with painting of suitable colour. |
| 24 | Supply and fixing of TNEB meter board suitable for 32A single phase service connection with 32 A fuse unit (500V)32A neutral link and earth link (1\\"x1/8\\"copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1\\" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit with 1 No 40 Amp 30 M A Double Pole RCD / RCCB (Lower End) with suitable necessary connection |
| 25 | Earthing as per PWD standard with an earth electrode of 2 metre Class 'B' GI pipe of dia not less than 32mm complete with necessary masonry work |
| 26 | Supply and Run of 2 of 2.5 sq.mm PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade on 7/20 GI wire for service connection mains |
| 27 | Sub total |
| 28 | GST @ 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysOct 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender