Tender For Restoration Of Rain Damages To Water Supply Scheme Chanoutha Mandoutha In Gp Chnoutha Tehsil Holi Distt Chamba (Sh-C/O Reinforced Cement Concrete Intake 3 Nos. Excavation Laying Jointing & Testing Of Gi Pipe & Dismentaling & Relaying Of Gi
Tender Overview
Project Description
Tender for Restoration Of Rain Damages To Water Supply Scheme Chanoutha Mandoutha In Gp Chnoutha Tehsil Holi Distt Chamba (Sh-C/O Reinforced Cement Concrete Intake 3 Nos. Excavation Laying Jointing & Testing Of Gi Pipe & Dismentaling & Relaying Of Gi Pipe At Various Rds
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation trenches in earth work in all kinds of soil such as pick work jumper work blasting work in hard/soft rocks chiselling/wedging out of hard/soft rocks including dewatering in saturated soil upto all leads and lifts stacking the excavated soil/materials not more than three metres clear from the edge of excavation and then returning the stacked soil in 15 cm layers when required into plinths sides of foundations etc.consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as per the direction of Engineer-in-Charge. |
| 2 | Providing and laying cement concrete 1:3:6 ( One cement : three sand: six graded stone aggregate 40mm nominal size) and curing complete excluding the cost of form work form work in foundation and plinth within all leads and lifts as per the direction of Engineer-in-Charges. |
| 3 | Providing and laying cement concrete 1 : 1. 5 : 3 ( One cement : one & half sand: three graded stone aggregate 20mm nominal size) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in:- |
| 4 | Foundation ,footing bases of column and the like mass concrete within all leads and lifts as per direction of Engineer-in-Charges. |
| 5 | In walls ( any thickness but not less than 0.10 metre thickness) attached pillasters, buttresses plinth and string cources etc. from top of foundationlevel up to floor two level within all leads and lifts as per the direction of Engineer-in-Charges. |
| 6 | Suspended floor roofs, landing and shelves and their support balconies, beams, girders, bressumers and contilever upto floor two level with in all leads and lifts as per direction of the Engineer-in-charge. |
| 7 | Providing and laying no fine concrete with cement concrete 1:6 (1: cement :6 graded crushed stone agg. of 20mm. Nominal size) and curing complete excluding the cost of form work in foundation and plinth with in all leads and lifts as per direction of the Engineer-in-charge. |
| 8 | Providing mild / tor steel reinforcement for reinforced concrete work including bending, binding and placing in position complete up to floor two level including within all leads and lifts as per direction of Engineer -in- Charge. |
| 9 | Providing form work with steel plates 3.15 milimetre thick welding with angle iron in frame 30x30x5 milimetre so as to give fair finish including centering, shuttering and propping etc. with wooden battens and ballies, height of propping and centring below floor to ceiling not exceeding four metres and removal of the same for in-situ-reinforced concrete and plain concrete work in:- |
| 10 | Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters, buttresses, plinth and string courses and the like within all leads and lifts as per the direction of Engineer-in Charge. |
| 11 | Flat surface such as soffits of suspended floors, roofs, landing and the like floor etc. up to 200 milimetres in thickness including all leads and lifts as per the direction of Engineer -in- Charge. |
| 12 | White washing with lime on undecorated wall surfaces( two coats) to give an even shade i/c throughly brooming the surface to remove all dust dirt & other foreign matter as per direction of Engineer-in-charge |
| 13 | Laying, jointing and fixing of GI Pipe of following diametre in Inlet,outlet and Scour pipe with in all leads and lifts as per the direction of Engineer-in-Charge. |
| 14 | Outlet & Scour pipe 50 mm dia |
| 15 | Providing & supplying Brass Valve complete as per the direction of Engineer-in-Charge. |
| 16 | 50 mm dia |
| 17 | Laying, jointing and fixing of GI Pipe of following diametre in Inlet,outlet and Scour pipe with in all leads and lifts as per the direction of Engineer-in-Charge. |
| 18 | 20 mm dia (L) |
| 19 | 50 mm dia |
| 20 | Providing Laying, in trenches HDPE pipe i/c fitting such as tees, elbows , Unions , Nipples etc as . complete in all respcet (Earth work in trenches to be measured and paid for separately) with in all leads and lifts as per the direction of Engineer-in-Charge. |
| 21 | 25 mm dia Nominal Dia ( PE-80 PN - 12.50) |
| 22 | Dismentelling of Galvanised mild steel tube light grade . complete in all respcet (Earth work in trenches to be measured and paid for separately) with in all leads and lifts as per the direction of Engineer-in-Charge. |
| 23 | 50 mm dia |
| 24 | 40 mm dia |
| 25 | Re-laying, Jointing & testing of Galvanised mild steel tube light grade including the cost of Tee, Bend, Union, Socket & elbow etc. complete in all respcet (Earth work in trenches to be measured and paid for separately) with in all leads and lifts as per the direction of Engineer-in-Charge. |
| 26 | 50 mm dia |
| 27 | 40 mm dia Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender