Tender For Restoration Of Rain Damages To Water Supply Scheme Silpari , Water Supply Scheme Tundah Bani Devi, Water Supply Scheme Guwad, Water Supply Scheme Khanog Silpari Water Supply Scheme Sarotha Mandha, Water Supply Scheme Tundah Cheli In Gp Tun
Tender Value
14.15 Lakhs
Estimated cost
Bid Submission
06 Oct 2026
5 days left
EMD
28301
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chamba → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Restoration Of Rain Damages To Water Supply Scheme Silpari , Water Supply Scheme Tundah Bani Devi, Water Supply Scheme Guwad, Water Supply Scheme Khanog Silpari Water Supply Scheme Sarotha Mandha, Water Supply Scheme Tundah Cheli In Gp Tundah Tehsil Bharmour Distt Chamba (Sh-C/O Roughening Filter With Intake Chamber At Mandha Source, Chuldah Source Khanog Source, Providing L/J Of Hdpe Pipe Of Various Dia At Various Rd Dismantling & Re-Laying Of Gi Pipe At Various Rd) Under Pdna
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation trenches in earth work in all kinds of soil such as pick work jumper work blasting work in hard/soft rocks chiselling/wedging out of hard/soft rocks including dewatering in saturated soil upto all leads and lifts stacking the excavated soil/materials not more than three metres clear from the edge of excavation and then returning the stacked soil in 15 cm layers when required into plinths sides of foundations etc.consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as per the direction of Engineer-in-Charge. |
| 2 | Providing and laying cement concrete 1:3:6 ( One cement : three sand: six graded stone aggregate 40mm nominal size) and curing complete excluding the cost of form work form work in foundation and plinth within all leads and lifts as per the direction of Engineer-in-Charges. |
| 3 | Providing and laying cement concrete 1 : 1. 5 : 3 ( One cement : one & half sand: three graded stone aggregate 20mm nominal size) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in:- |
| 4 | Foundation ,footing bases of column and the like mass concrete within all leads and lifts as per direction of Engineer-in-Charges. |
| 5 | In walls ( any thickness but not less than 0.10 metre thickness) attached pillasters, buttresses plinth and string cources etc. from top of foundationlevel up to floor two level within all leads and lifts as per the direction of Engineer-in-Charges. |
| 6 | Providing and laying cement concrete 1:3:6 ( One cement : three sand: six graded stone aggregate 20mm nominal size) and curing complete excluding the cost of form work form work in foundation and plinth within all leads and lifts as per the direction of Engineer-in-Charges. |
| 7 | Providing and laying cement concrete 1:2:4( 1 cement :2 sand :4 graded stone agg. 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in :- Foundation and plinth and the like and mass concrete as per direction and to the entire satisfaction of the Engineer-in -charge. |
| 8 | In suspended floors, roofs, landing and shelves and their support baclonies beams girders bressumers cantilever up to floor level including within all leads and lifts as per the direction of Engineer-in-charge. |
| 9 | Providing mild steel/tor steel (reinforcement for RCC work) including bending,binding and placing in positioncomplete in all respect including all leads and lifts as per the direction and entire satisfaction of Engineer-in-Charge. |
| 10 | Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering strutting and propping etc. with wooden batten and ballies, in all heights of propping and centring below supporting floor to ceiling not exceeding 4 mtrs and removal of the same for insitu-reinforced concrete and plain concrete work in :- |
| 11 | Vertical surfaces such as wall (any thickness) partitions and the like including attached pillasters, buttresses plinth and string courses and the like in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge. |
| 12 | In flat surfaces with steel plates such as soffits of suspended floors, roofs, landing and the like floor etc upto 200 mm thickness in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge. |
| 13 | Laying joitning and fixing of GI pipe of following diameter in inlet outlet and scour pipe with in all leads and lifts as per the direction of Engineer-in-charge |
| 14 | Outlet & Scour pipe 40mm dia |
| 15 | Providing/Placing in horizontal layers filtering media duly graded screened washed & cleaned as specified by Engineer-in-charge |
| 16 | Bottom layer Broken stone 50mm to 75mm |
| 17 | Centre layer bajri 20mm to 25mm |
| 18 | Top layer bajri 6mm to 20mm |
| 19 | Providing and supplying Brass Vavle complete as per the direction of Engineer-in-charge |
| 20 | Providing and fixing SFRC Manhole cover with frame & locking arrangment having frame size of 500 mm internal dia should not be less than 100 kg |
| 21 | Dismentaling of Galvanised mild steel tube light grade complete in all respect (Earth work in trenches to be measured and paid for separtely) with in all leads and lifts as per the direction of Engineer-in-charge |
| 22 | 20 mm dia |
| 23 | 25 mm dia |
| 24 | 32 mm dia |
| 25 | Re-laying jointing of GMS tube (LG) fitting compplete (earth work in treanches to be measured and paid separatly) including entire carriage of material within all leads and lifts as per the direction of Engineer-in-charge |
| 26 | 20 mm dia |
| 27 | 25 mm dia |
| 28 | 32 mm dia |
| 29 | Providing and laying in tranches high density polyethylene pipe (conforming to IS:4984-2016) complete with fitting (earth work in tranches to be measured & paid for separtley) 25 mm dia |
| 30 | 20mm dia PE 80/PN 10 |
| 31 | 25mm dia PE 80/PN 10 |
| 32 | 32mm dia PE 80/PN 10 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysOct 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender