Tender For Tender For Repair Work Of Toilet At Ground Floor At Esd Hpsebl Gohar Under Electrical Division Hpsebl, Gohar - Ch. To: -Estimate For Providing Sop For Multi Water Supply Scheme For 9 No. Of Panchayat Of Chailchowk Area Stage -1St Zone No.5
Tender Value
1.69 Lakhs
Estimated cost
Bid Submission
06 Oct 2026
4 days left
EMD
1700
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mandi → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Tender For Repair Work Of Toilet At Ground Floor At Esd Hpsebl Gohar Under Electrical Division Hpsebl, Gohar - Ch. To: -Estimate For Providing Sop For Multi Water Supply Scheme For 9 No. Of Panchayat Of Chailchowk Area Stage -1St Zone No.5 At Kot In Electrical Section Chunahan Under Esd Hpsebl Baggi (T.S- 53/2024-25 Total Amount Rs. 64.93.600/-Only W.B.S. No.:- D-24-0430)
BOQ
| Sl. No. | Item Description |
| 1 | Civil Work |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size) |
| 3 | Dismantling plaster and cleaning the surface for tile work or Wiring work including disposal of rubbish to the dumping ground within 50 metres lead. |
| 4 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cementand matching pigments etc., complete.Size of Tile 600x600 mm |
| 5 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours,shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 6 | Structural steel work riveted, bolted or welded in built up sections, trusses andframed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete |
| 7 | Dismantling tile work in floors and roofs laid in cementmortar including stacking material within 50 metres lead |
| 8 | Dismantling of Toilet fitting wherever required |
| 9 | Providing and laying in position cement concrete ofspecified grade excluding the cost of centering andshuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand) : 6 gradedstone aggregate 20 mm nominal size) |
| 10 | Water Supply & Sanitary Installation Part |
| 11 | Providing and fixing white vitreous china pedestal type water closet (Europeantype W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern,including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plasticseat and lid (Make Cera, Johnson,Perrware as per direction of EIC) |
| 12 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap(Make Cera, Johnson,Perrware as per direction of EIC) |
| 13 | Providing and fixing white vitreous china pedestal for wash basin completelyrecessed at the back for the reception of pipes and fittings(Make Cera, Johnson,Perrware as per direction of EIC) |
| 14 | Providing and fixing white vitreous china flat back halfstall urinal of size 580x380x350 mm with white PVCautomatic flushing cistern, with fittings, standard sizeC.P. brass flush pipe, spreaders with unions and clamps(all in C.P. brass) with waste fitting as per IS : 2556, C.I.trap with outlet grating and other couplings in C.P. brass,including painting of fittings and cutting and makinggood the walls and floors wherever required :Range of two half stall urinals with 5 litreP.V.C. automatic flushing cistern |
| 15 | Providing and fixing brass bib cock of approved quality :15 mm nominal bore.(Make Jal, Jahnson, or equivalent approved by EIC). |
| 16 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893115mm nominal bore.(Make Jal, Jahnson, or equivalent approved by EIC) |
| 17 | Providing and fixing C.P. brass Soap dish of approved quality.(Make Jal, Jahnson, or equivalent approved by EIC) |
| 18 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size approved make :Rectangular shape 450x600 mm. |
| 19 | Providing and fixing braided connection pipe with brass unions :45 cm to 60cm length 15 mm nominal bore |
| 20 | Providing & fixing 8.00 mm dia cCP & SS jet with flexible tube 1 meter long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.(Make Jal, Jahnson, or equivalent approved by EIC) |
| 21 | Providing and fixing SS grating of approved qualityand colour.100 mm nominal dia.(Make Jal, Jahnson, or equivalent approved by EIC) |
| 22 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C.waste fittings complete : semi rigid : 32 mm dia. |
| 23 | Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL-PE Composite tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.(Make Diplast,Vectus 5 layer as per direction of EIC) |
| 24 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumasticpaint, cutting chases and making good the wall :. -15 mm dia nominal bore |
| 25 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :15 mm nominal bore |
| 26 | Providing and fixing ball valve (brass) of approved quality, High or lowpressure, with plastic floats complete :15 mm nominal bore |
| 27 | Electrical Part |
| 28 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C. |
| 29 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.a). - 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 30 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.- 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 31 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. |
| 32 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. asrequired |
| 33 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required |
| 34 | Supplying and fixing brass batten/ angle holder including connection etc. as required. |
| 35 | Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required. |
| 36 | Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40A |
| 37 | Providing and installation of LED Tube 1200 mm long of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required.Make: Philips, Syska, Halonix, Bajaj,Twinkle,C&S, Panasonic or any other approved by Engineer-in-Charge. |
| 38 | Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:- Exhaust Fan, Light duty, (Domestic) 300 mm sweep Make: Philips, Syska, Halonix, Bajaj,Twinkle,C&S, Panasonic or any other approved by Engineer-in-Charge. |
| 39 | Providing and installation of LED bulb 7 watt complete with all accessories including making connections, testing etc. as required.Make: Philips, Syska, Halonix, Bajaj,Twinkle,C&S, Panasonic or any other approved by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender