Tender For annual rate contract For miscellaneous Civil Works In Factory & Township Areas And Operation Of Sump House In Township During 2026-27
Tender Value
1.63 Crore
Estimated cost
Bid Submission
26 Oct 2026
0 days left
EMD
1 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Panipat → Haryana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for annual rate contract For miscellaneous Civil Works In Factory & Township Areas And Operation Of Sump House In Township During 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Carriage of material by Mechanical transport including loading, unloading & stacking upto1km I.e. within Factory/Township Areas. |
| 2 | a) Lime, moorum, building rubbish |
| 3 | b) Earth. |
| 4 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including disposal of excavated earth upto 50 m and lift upto 1.5 m, disposed soil to be levelled and neatly dressed : |
| 5 | All kind of soil |
| 6 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. |
| 7 | All kind of soil |
| 8 | Earth work in excavation by Mechanical Means (Hydraulic Excavator) / Manual means in foundation trenches or drains not exceeding 1.5m in width or 10 sq.m. on plan including dressing of sides and ramming of bottoms, lift upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m: |
| 9 | All kinds of soil |
| 10 | Excavating trenches of required width for pipes, cables, etc. including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5m including getting out the excated soil, and then returnjing the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposal of surplus excavated soil as directed within a lead of 50m: All kinds of soil Pipes, Cables, etc. not exceeding 80mm dia. |
| 11 | Extra rates for quantities of works, executed:In or under water and/or liquid mud. |
| 12 | Filling available excavated earth (excluding rock) in trenches plinth sides of foundation etc. in layers not exceeding 20cm in depth: consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5 m. |
| 13 | Extra for every additional lift of 1.5m or part thereof in: All kinds of soil |
| 14 | Supplying and filling in plinth with Jamuna sand under floors including, watering, ramming, consolidating and dressing complete. |
| 15 | Surface dressing of the ground including removing vegetation, and inequalities not exceeding 15cm deep and disposal of rubbish lead upto 50m and lift upto 1.5m: All kinds of soil |
| 16 | Excavating holes upto 0.5 cu.m including getting out the excavated soil then returning the soil as required in layer not exceeding 20cm in depth, including consolidating each deposited layer by ramming watering etc disposing of surplus excavated soil as directed with in a lead of 50m and lift upto 1.5m: All kinds of soil |
| 17 | Providing and laying Cement Mortar 1 : 3 ( 1 Cement : 3 Fine Sand ) on top of Boundry wall and fixingbrocken glass pieces as a security measures or at any other location for any other work. |
| 18 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering All works upto plinth level. |
| 19 | 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 20 | 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size). 20mm nominal size). |
| 21 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size). |
| 22 | 1:5:10 (1 cement:5 Fine sand: 10 graded stone aggregate 40mm nominal size). |
| 23 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement:3 coarse sand:6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated grouted with fine sand including finishing the top smooth. |
| 24 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring,huttering, finishing and reinforcement. All work upto plinth level. |
| 25 | 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size). |
| 26 | 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20mm nominal size). |
| 27 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 28 | Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete in lintels, beams and bressumers, including setting in cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering and shuttering but , excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size) |
| 29 | Centering and shuttering including strutting, propping etc.and removal of form for: |
| 30 | a) Foundations, footings, bases of columns etc. or mass concrete and precast shelves. |
| 31 | b) Suspended floors, roofs, landings balconies and access platforms. |
| 32 | c) Shelves. (Cast in situ) |
| 33 | d) Lintels, beams, plinth beams, girders, bressumers and cantilevers. |
| 34 | Reinforcement for RCC work ( Tor or Mild ) including bending, binding, straightening and placing in position complete (Tor / Mild steel will be supplied by NFL free of cost). |
| 35 | Brick work with common burnt clay FPS (Non modular) bricks of class designation 7.5 in foundation and plinth in : |
| 36 | a) Cement Mortar 1:6 (1 cement : 6 fine sand) |
| 37 | b) Cement Mortar 1:4 (1 cement : 4 fine sand) |
| 38 | Brick work with common burnt clay FPS (Non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all size & shape : |
| 39 | a) Cement Mortar 1:6 (1 cement : 6 coarse sand) |
| 40 | b) Cement Mortar 1:4 (1 cement : 4 coarse sand) |
| 41 | Half brick masonry with common burnt clay FPS (Non modular) bricks of class designation 7.5 in foundations and plinth in cement mortar 1:4 (1 cement : 4 coarse sand) |
| 42 | Half brick masonry with common burnt clay FPS (Non modular) bricks of class designation 7.5 in Superstructure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand) |
| 43 | Providing and fixing 18 mm thick gang saw cut mirror polished, premoulded and prepolished machine cut for kitchen plateforms, vanity counters facias and similar locations of required size of approved shade colour and texture laid over 20 mm thick base cement mortar 1 : 4 ( 1 Cement : 4 Coarse sand) with joints treated with white cement mixed with matching pigment, epoxy touch up including rubbingcuring etc. complete : Area over 0.50 Sq.M. |
| 44 | a) Rajnagar Plain white Marble |
| 45 | b) Granite of any colour and Shade |
| 46 | Mirror Polishing on existing Marble work / Stone work wherever required to give highgloss finish |
| 47 | Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with: |
| 48 | Decorative veneer facings of approved manufacture |
| 49 | Providing and fixing presed 3 layer partical board medium density exterior grade (grade 1) or graded woodarticle board IS :3087 marked to frame, backing or studding with screws etc. , complete (Frames, backing or studding to be paid separately) 18mm thick |
| 50 | Providing and fixing 18mm thick, 150mm wide pelmet of flat pressed 3 layer or graded wood particle board medium density grade I, IS:3087 marked including top cover of 6mm commercial ply wood conforming to IS:303 BWR grade nickel plated M.S. pipe 20mm dia (Heavy Type) curtain rod with nickle plated brackets including (heavy type) curtain rod with nickel plated brackets including fixing with 25x3 mm M.S. flat 10 cm long fixed to pelmet with Hollock wood cleats of size 100mmX40mmX40mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete. |
| 51 | Providing and fixing nickel plated M.S. Pipe curtain rods with nickelplated brackets 20mm dia (heavy type) |
| 52 | Providing and fixing M.S.Griil of required pattern in wooden frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. |
| 53 | a) Fixed to steel windows by welding. |
| 54 | b) Fixed in opening/wooden frame with rawl plugs screws etc. |
| 55 | Providing 40x5mm flat iron hold fast 40cm long including fixing to frame with 10mm dia bolts;nuts and wooden plugs and embeddings in cement conc block 30x10x15cm 1:3:6 mix (1cement : 3coarse : 6graded stone aggregate 20mm nominal size) |
| 56 | Providing and fixing ISI marked oxidised M.S. pressed butt hinges bright finished with necessary screws etc. complete : |
| 57 | a) 100x58x1.9mm |
| 58 | b) 75x47x1.7mm |
| 59 | Providing M.S. Piano hinges ISI marked IS:3818 finished with nickle plating and fixing with necessary screws etc.,complete. |
| 60 | Overall width 35mm |
| 61 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 250x16mm |
| 62 | Providing and fixing ISI marked oxidised M.S.Tower bolt black finish (barrel type) with necessary screws etc.complete |
| 63 | a) 200x10mm |
| 64 | b) 150x10mm |
| 65 | c) 100x10mm |
| 66 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : |
| 67 | 100mm |
| 68 | Providing and fixing ISI marked oxidised M.S. hasp and staple (safety type) conforming to IS:363 with necesary screws etc. complete. |
| 69 | Providing and fixing oxidised M.S.casement stays (Straight peg type) with necessary screws etc. complete. |
| 70 | 300mm weighing not less than 200 gms. |
| 71 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door |
| 72 | width from 701 mm to 1000 mm) with double speed adjust |
| 73 | Providing and fixing Chrominium plated brass 100mm mortice latch and lock with 6 levers & a pair of lever handles of approved quality with necessary screws etc. complete |
| 74 | Providing and fixing Aluminium Tower Bolts ISI Marked anodised (Anodic Coating not less than AC 10 as per IS : 1868 ) transparent or dyed to required colour / shade with necessary screws complete : |
| 75 | a) 200 X 10 mm |
| 76 | b) 150 X 10 mm |
| 77 | c) 100 X 10 mm |
| 78 | Providing and fixing Aluminium handles ISI Marked anodised (Anodic Coating not less than AC 10 as per IS : 1868 ) transparent or dyed to required colour / shade with necessary screws etc. complete : |
| 79 | a) 125mm |
| 80 | b) 100mm |
| 81 | Providing & fixing aluminium hanging floor door stopper ISI Marked anodised (anodic coating not less than grade AC 10 as per IS 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. Twin rubber stopper |
| 82 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. |
| 83 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 84 | Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 plyveneering with vertical grains or cross bands an (Note : Translucent sheet of minimum thickeness 1mm to be attached on back side of Bathroom & Toilet doors) |
| 85 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 86 | ALL STRUCTURAL STEEL TO BE ARRANGED BY THE PARTY FROM OPEN MARKET AT HIS COST |
| 87 | Structural Steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer : all complete. |
| 88 | Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 89 | Steel work welded in built up sections/framed work including cutting hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 90 | In gratings,frames,guard bars,ladders,railings,brackets, gates and similar works. |
| 91 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides an |
| 92 | 80x1.25mm M.S. laths with 1.25 mm thick top cover. |
| 93 | Providing and fixing ball bearing for rolling shutters. |
| 94 | Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm thick cement mortar including filling the joint with same mortar, with common burnt clay Non Modular Bricks |
| 95 | 1:6 (1 cement : 6 coarse sand) |
| 96 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. |
| 97 | 40mm thick with 20mm nominal size stone aggregate |
| 98 | Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size include finishing complete. |
| 99 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:15622 (Thickness to be specified by manufacturer) of approved make in all colours and shades except burgundy, bottle green, black of any size as approved by engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 (1 Cement : 3 Coarse sand) and joining with grey cement slurry @ 3.3 kg. per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 100 | Providing and fixing ceramic glazed floor tiles 300 X 300 mm (Thickness to be specified by manufacturer) of 1st quality conforming to IS:15622 of approved make in clours such as White, Ivory, Grey, Fume Red Brown etc. laid on 20 mm thick CementMortar 1:4 ( 1 Cement : 4 Coarse Sand) including pointing the jointswith white cement and matching pigment etc., complete. |
| 101 | Providing & laying Vitrified Floor Tiles in different sizes (thickness to be specified by the manufacturer) with water absorptions less than 0.08 % and confirming to IS 15622 of approved make in all colours and shades laid on 20mm thickcement mortar1 : 4 (1 cement : 4 coarse sand lncluding grouting the joints with white cement and matching pigmnets etc. complete |
| 102 | I) Size of tile 600 mm X 600 mm |
| 103 | Providing high impact Polypropylene reinforced cement 6 mm thick corrugated sheets (as per IS: 14871) roofing up to any pitch and fixing with polymer coated J, or L hooks, bolts and nuts 8 mm dia. G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafters and trusses), including cutting sheets to size and shape wherever required. |
| 104 | Providing and fixing ridges and hips in fibre cement high impact polypropylene reinforced roofing with suitable fixing accessories or self drilling fastener and EPDM washer etc. complete. |
| 105 | Providing and fixing fibre cement high impact polypropylene reinforced roofing accessories in all colours with polymer coated J or L hooks,bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumenwashers or with self drilling fastener and EPDM washer etc.complete: |
| 106 | North light curves |
| 107 | Ventilators Curves |
| 108 | Painting top of roofs with bitumen of approved quality at 17 kg. per 10m2 impregnated with a coat of coarse sand at 60dm3 per 10m2 including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete. |
| 109 | With residual type petroleum bitumen of Grade VG-10 |
| 110 | Providing gola 75x75mm in cement concrete 1 cement : 2 coarse sand:4 stone aggregate 10mm and down guage) including finishing with cement mortar 1:3( 1 cement: 3 fine sand) as per standard design. |
| 111 | In 75x75mm deep chase. |
| 112 | Providing and fixing on wall face unplasticised - Rigid PVC rain waterpipes conforming to IS:13592 Type A including jointing with sealring conforming to IS : 5382 leaving 10mm gap for thermal expansion. |
| 113 | a) Single socketed pipes, 75 mm diameter |
| 114 | b) Single socketed pipes, 110 mm diameter |
| 115 | Providing and fixing on wall face unplasticised PVC moulded fittings/accessoriess for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type- A including jointing with seal ring conforming to IS:5382 leaving 10 mm gap for thermal expansion. |
| 116 | a) Coupler 75mm |
| 117 | b) Coupler 110mm |
| 118 | c) Single tee with door 75x75x75 mm |
| 119 | d) Single tee with door 110x110x110 mm |
| 120 | e) Bend 87.5 degreee 75 mm |
| 121 | f) Bend 87.5 degreee 110mm |
| 122 | g) Shoe (Plain) 75 mm |
| 123 | h) Shoe (Plain) 110mm |
| 124 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed fromM.S. sheets and galvanized with zinc coating of 120 gms/sqm (bothside inclusive) as per IS : 277 and consisting of angle cleats of size25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at1200 mm centre to centre, one flange fixed to the ceiling with dashfastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flangeof cleat fixed to the angle hangers of 25x10x0.50 mm of requiredlength with nuts & bolts of required size and other end of anglehanger fixed with intermediate G.I. channels 45x15x0.9 mm runningat the spacing of 1200 mm centre to centre, to which the ceilingsection 0.5 mm thick bottom wedge of 80 mm with tapered flangesof 26 mm each having lips of 10.5 mm, at 450 mm centre to centre,shall be fixed in a direction perpendicular to G.I. intermediate channelwith connecting clips made out of 2.64 mm dia x 230 mm long G.I.wire at every junction, including fixing perimeter channels 0.5 mmthick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugsat 450 mm centre, with 25mm long dry wall screws @ 230 mminterval, including fixing of gypsum board to ceiling section andperimeter channel with the help of dry wall screws of size 3.5 x 25mm at 230 mm c/c, including jointing and finishing to a flush finishof tapered and square edges of the board with recommended jointingcompound , jointing tapes , finishing with jointing compound in 3layers covering upto 150 mm on both sides of joint and two coats ofprimer suitable for board, all as per manufacturer's specification andalso including the cost of making openings for light fittings, grills,diffusers, cutouts made with frame of perimeter channels suitablyfixed, all complete as per drawings, specification and direction ofthe Engineer in Charge but excluding the cost of painting with :12.5 mm thick tapered edge gypsum fire resistant boardconforming to IS: 2095- Part I |
| 125 | Providing and fixing unplasticised-PVC pipe clips of approved design to unplasticised PVC rainwater pipes by means of 50X50X50 mm hard wood plugs screwed with M.S.srews of required length including cutting of brickwork and fixing in cement mortar 1:4 (Icement : 4 coarse sand) and making good the wall etc. complete. |
| 126 | 110mm |
| 127 | 12mm cement plaster of mix 1:6 (1 cement : 6 fine sand). |
| 128 | 15mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement : 6 fine sand). |
| 129 | 12mm cement plaster of mix 1:4 (1 cement:4 coarse sand) |
| 130 | Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement |
| 131 | Pointing on brick work or Brick Flooring with cement mortar 1:3 ( 1 cement : 3 fine sand) : |
| 132 | Flush / ruled / struck or weathered Pointing. |
| 133 | Repairs to plaster of thickness 12 to 20 mm in patches of area 2.5 sq.metres and under including cutting the patch in proper shape,raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead: |
| 134 | With cement mortar 1:4 (1 cement : 4 fine sand): |
| 135 | Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded sto |
| 136 | a) Door chokhats. |
| 137 | b) Window chowkhats. |
| 138 | c) Clerestory window chowkhats. |
| 139 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty |
| 140 | Float Glass panes of thickness 4 mm weighing 10 kg/m2 |
| 141 | Renewing glass panes and re-fixing existing wooden fillets |
| 142 | a) Float Glass panes of thickness 4 mm |
| 143 | b) Float glass panes of thickness 5.5 mm |
| 144 | Supplying and fixing new wooden fillets wherever necessary: Red Marindi wood fillets. |
| 145 | Renewal of old putty of glass panes (length) |
| 146 | Regrading terracing of mud phaska covered with tiles or bricks, in cement by dismantling tiles or bricks, removing mud plaster preparing the surface of mud phaska to proper slope relaying plaster gobri leaping and tiles or bricks, grouted in cement mortar 1:3(1 cement: 3 fine sand) including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground(the cost of the new tiles or bricks excluded) within 50 mtrs. lead. |
| 147 | Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering including disposal of rubbish to the dumping ground within 50 metres lead. |
| 148 | Demolishing cement concrete mannually/by Mechanical means including disposal of material within 50mtrs lead. As per Direction of Engineer in Charge, 1:3:6 or richer mix. |
| 149 | Demolishing RCC manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 150 | Extra for cutting reinforcement bars mannually / by Mechanical means in R.C.C. or R.B. work(Payment shall be made on the cross sectional area of R.C.C. or R.B. work). As per Direction of Engineer in Charge |
| 151 | Demolishing brick work mannually / by Mechanical means including stacking of serviceable material & disposal of unserviceable material within 50mtrs lead :As per Direction of Engineer in Charge In Cement Mortar. |
| 152 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : of area 3 sq.m. and below. (Double leaf shutter shall be treated as 1 unit only for measurement ) MS Grill from window/vent chowkhats ) |
| 153 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: |
| 154 | Asbestos Sheets ( CGI Sheets/ Aluminium / any other type Sheets) |
| 155 | Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking with in 50 metre lead. |
| 156 | Dismantling mannualy / by Mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead:As per Direction of Engineer in Charge |
| 157 | a) Water bound macadam road |
| 158 | b) Bituminous road. |
| 159 | Dismantling G.I. pipe (external/internal) including excavation and re-filling trenches after taking out the pipes manaully /by mechanical means including stacking of pipes within 50 meter lead. As per Direction of Engineer in Charge |
| 160 | a) 15mm to 40mm nominal bore. |
| 161 | b) Above 40mm. nominal bore. |
| 162 | Dismentling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground with in 50 metre lead. |
| 163 | Dismantling aluminium/ Gypsum or wooden partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. |
| 164 | Fencing with R.C.C. post placed at required distance, embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post one side only, provided with horizontal lines and two diagonals othe post (cost of R.C.C. posts, struts, earth work and concrete to be paid for separately) :- Payment to be made per metre cost of total length of barbed wire used. ( Payment to be made on the bases of per Metre length of individual barbed wire erected) With G.I. barbed wire. |
| 165 | Supplying at site Angle Iron Posts and struts of required sizes including bottom to be split and bent at right angle in opposite directions for 10 cm length and drilling holes upto 10 mm dia |
| 166 | Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) |
| 167 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved s;ze, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. |
| 168 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. |
| 169 | Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineerin- charge. (Old CC paver blocks shall be supplied by the department free of cost). |
| 170 | Providing and fixing white vitreous china pedastal type water closet (Europeon type) with seat and lid 10 litters low level white viterous china low level flushing cistern & CP flush bend flushing cistern with fittings and CI / MS brackets, 40mm flush bend, overflow arrangement with specials of standered make and mosquto proof coupling of approved municipal design complete including painting of fittings and bracket, cutting and making good the walls and floors wherever required : |
| 171 | W.C.Pan with black/white solid plastic seat and lid |
| 172 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- |
| 173 | White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single holebasin mixer |
| 174 | Providing and fixing / replacing Stainless steel A ISI 304 kitchen sink as per I.s. 13983 with C.I. Brackets and stainless steel plug 40mm including painting of fittings and brackets, cutting and makinggood the walls wherever required: |
| 175 | Kitchen sink without drain board. 610 X 460mm bowl depth 200 mm |
| 176 | Providing and fixing / replacing white vitreous china water closet squatting pan(Indian type) |
| 177 | Long pattern W.C. pan of size 580mm./ Orrisa pattern 580 X 440 mm |
| 178 | Providing and fixing / replacing white vitreous chine pedestal type (European type/wash down type)water closet pan of of approved make |
| 179 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 180 | Providing and fixing / replacing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS 7231, with all fittings and fixtures complete |
| 181 | 10 litre capacity - White |
| 182 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete: |
| 183 | White Solid Plastic Seat with lid |
| 184 | Providing and fixing / replacing controlled flush low level cistern made of vitreous china with all fittings complete : |
| 185 | 10 Litre (full flush) capacity - white |
| 186 | Providing and fixing G.I. inlet connection for flush pipe connecting with W.C.Pan |
| 187 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. 15 mm nominal dia |
| 188 | Providing and fixing / replacing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm |
| 189 | and 340x410x265mm sizes respectively. |
| 190 | Providing and fixing / replacing white vitreous china wash basin including making all connections but excluding the cost of fittings : |
| 191 | Flat back wash basin of size 550x400mm. |
| 192 | Flat back wash basin of size 450x300mm |
| 193 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 194 | Semi rigid pipe 32 mm dia / Flexible pipe |
| 195 | Providing and fixing 100mm Sand Cast Iron/C.P. grating for gully trap. |
| 196 | Providing and fixing / replacing 600 X 450 mm bevelled / Plain edge mirror of superior glass ( of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P brass screws and washers Complete |
| 197 | Providing and fixing toilet paper holder C.P. Brass |
| 198 | Providing and fixing plain bend of required degree 100mm Sand cast iron S&S as per IS 1729 |
| 199 | Providing & fixing PTMT shelf 440 mm long,124 mm width and 36mm height of approved quality and colour,weighing not less than 300gms |
| 200 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal Work - Exposed on wall. NOTE: (All fittings like MTA, FTA, elbows or any fitting required at site are included in this item). |
| 201 | 20 mm nominal dia Pipes |
| 202 | 25 mm nominal dia Pipes |
| 203 | 32 mm nominal dia Pipes |
| 204 | Providing and fixing Chlorinated Polyvinyl Chloride(CPVC) pipes, having thermal stability for hot & coldwater supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer inCharge : External work NOTE: (All fittings like MTA, FTA, elbows or any fitting required at site are included in this item). |
| 205 | 20 mm nominal dia Pipes |
| 206 | 25 mm nominal dia Pipes |
| 207 | 32 mm nominal dia Pipes |
| 208 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. (internal work) : Exposed on wall |
| 209 | 15mm nominal bore. |
| 210 | 20mm nominal bore. |
| 211 | 25mm nominal bore |
| 212 | 32mm nominal bore |
| 213 | 40mm nominal bore |
| 214 | 50mm dia nominal bore |
| 215 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. (external work). |
| 216 | 15mm nominal bore. |
| 217 | 20mm nominal bore. |
| 218 | 25mm nominal bore |
| 219 | 32mm nominal bore |
| 220 | 40mm nominal bore |
| 221 | 50mm dia nominal bore |
| 222 | Providing and fixing brass bib cock of approved quality : 15mm nominal bore. |
| 223 | Providing and fixing brass stop cock of approved quality : |
| 224 | 15mm nominal bore. |
| 225 | 20mm nominal bore. |
| 226 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screw end) : |
| 227 | 20 mm nominal bore. |
| 228 | 25 mm nominal bore. |
| 229 | 40 mm nominal bore. |
| 230 | 50 mm nominal bore. |
| 231 | Providing and fixing ball valve (Brass) of approved quality complete : High or low pressure with plastic floats |
| 232 | 15mm nominal bore |
| 233 | Providing and fixing unplasticised P.V.C. connection pipe with brass unions :45 Cm length - 15 mm nominal bore |
| 234 | Providing and fixing C.P. Brass shower rose with 15 or 20mm inlet : 100mm diameter. |
| 235 | Providing lead caulked joints to spun iron pipes and specials including testing of joints but excluding the cost of pig lead. 150mm diametre pipe |
| 236 | Supply pig lead / Lead Wool at site of work. |
| 237 | Painting G.I.pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality: |
| 238 | a) 40mm diameter pipe. |
| 239 | b) 50mm diameter pipe. |
| 240 | Providing and filling sand ( fine sand) of grading zone v orcoarser grade alround the G.I. Pipes in external work. |
| 241 | a) 40mm diameter pipe. |
| 242 | b) 50mm diameter pipe. |
| 243 | Providing and fixing C.P.Brass bib cock / stop cock / angle cock of approved quality 15 mm nominal bore |
| 244 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore |
| 245 | Cutting holes upto 30x30cm in walls including making good the same: |
| 246 | With Common Burnt Clay F.P.S.( Non Modular ) Bricks. |
| 247 | Cutting holes upto 15cm x 15cm in R.C.C.floors and roofs for passing drain pipe etc. and repairing the holes after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement: 2 coarse sand:4 graded stone aggregate 20mm nominal size) including finishing complete so as to make it leak proof. |
| 248 | Making chase upto 7.5 X 7.5 cm in walls including making good and finishing with matching surface after housing pipes etc. |
| 249 | Dry stone pitching 22.5 cm thick laid in courses and required profile with hammer dresses stone having no side less than 15 cm with minimum depth of 20 cm including preparing the bedding surface etc all complete (Payment for stone to be made seperatly) |
| 250 | Providing and fixing PTMT bib cock of approved quality and colour 15 mm nominal bore, 86 mm long, weighing not less than 88gms |
| 251 | Providing and fixing PTMT stop cock of approved quality and colour 15 mm nominal bore, 86 mm long, weighing not less than 88gms |
| 252 | Providing and fixing PTMT pillar cock of approved quality and colour 15 mm nominal bore,107 mm long, weighing not less than 110 gms |
| 253 | Providing and fixing PTMT grating of approved quality and colour Circular type 100 mm nominal dia |
| 254 | Providing & fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./H.P.H.D. plastic ball 15 mm nominal bore,105 mm long, weighing not less than 138 gms |
| 255 | Providing & fixing PTMT swivelling shower,15 mm nominal bore, weighing not less than 40 gms |
| 256 | Providing & fixing unplasticised PVC connection pipe with PTMT nuts, collar and bush of approved quality and colour 15 mm nominal bore with 45 cm length |
| 257 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 258 | Providing, laying & jointing glazed stoneware pipe class SP - 1 with stiff mixture of cement mortar in the proportion of 1:1(1 cement:1 fine sand) including testing of joints etc. complete: 100 mm dia |
| 259 | Providing and laying cement concrete 1:5:10(1 cement:5 Coarse sand:10 graded stone aggregate 40mm nominal size) alround S.W.pipes including bed concrete as per standard desing: 100mm diameter S.W.pipe. |
| 260 | Constructing brick masonry manhole in cement mortar 1:4 (1cement:4 coarse sand) R.C.C. top slab with 1:2:4mix (1 cement: 2coarse sand:4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement:4 coarse sand:8 graded stone aggregate 40 mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement:3 coarse sand): Finished with floating coat of neat cement and making channels in cement concrete1:2:4 (1cement:2 coarse sand: 4graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete asper standard design: |
| 261 | Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (Light duty) 455x610 mm internal dimensions total weight of cover andframe to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg). With F.R.S. bricks. |
| 262 | Providing & fixing square mouth S.W. gully trapclass SP -1 complete withC.I. Grating brick masonry chamber with water tight CI cover with frameof 300X300 mm size (inside) the weight of cover to be not less than 4.50kg and frame to be not less than 2.70 kg as per standard design |
| 263 | 100X100 mm size P Type with Common burnt clay FPS ( Non Modular) bricks of class designation 7.5 |
| 264 | Providing and fixing anodised aluminium work for doors, windows, ventilators and partitions with extruded built up standrad tublar section /Z section and other sections of approved make confirming toIS:733 and IS:1285, anodised transparents or dyed to required shade according to IS:1868. (Minium anodic coating of grade AC 15) fixed with dash fastners of required dia and size including necessary filling up the gaps at junctions at top, bottom and sides with required EDPM rubber/ PVC /neoprene felt etc. Aluminium sections shall be smooth, rust free, straight mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/panelling C.P. brass/ stainless steel screws all complete as per Architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) |
| 265 | For fixed portion. |
| 266 | For shutters of doors, windows and ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of EDPM Rubber/neoprene gasket required ( Fittings shall be paid separately) |
| 267 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EDPM Rubber/neoprene gasket etc. complete as per the structural drawings and thedirection of Engineer-in-charge. (cost of aluminium snap beading shall be paid in basic item.) |
| 268 | With float glass panes 4 mm thickness |
| 269 | With float glass panes of 5.50mm thikness |
| 270 | Providing and fixing double action hydraulic floorspring of of approved brand and manufacture IS : 6315, having brand log embossed on the body/plate with double spring mechanism and door weight up to 125 kg for doors including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and coverplates with brass pivot and single piece M.S. Sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. |
| 271 | With Stainless Steel cover plate minimum 1.25 mm thickness |
| 272 | Providing and fixing 12 mm thick frameless toughened glass doorshutter /shelf etc of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, allcomplete as per direction of Engineer-in-charge |
| 273 | Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. |
| 274 | Grading roof for water proofing treatment with |
| 275 | a) Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 276 | b) Cement mortar 1:3 (1 cement : 3 coarse sand) |
| 277 | Providing & laying in situ five courses of water proofing treatment with APP (Atactic Polypropylene) modified Polymeric membrane membrane over roofs consisting of first coat of bitumen primer @ 0.40 Kg per sqm, 2nd & 4th coursesof bonding material @ 1.20 Kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to IS:702, 3rd layer of membrane APP Modified Polymeric memberane 2.0mm thick of 3.00 Kg/sqm weight consisting of five layers prefabricated with centre core as 100 micron (min.) HMHDPE films and wiched on both sides with polymericmix and the plymeric mix is protected on both side with 20 micron HMHDPE film. 5th, the top most layer shall be finished with brick tiles of class esignated 10 grouted with cement mortar 1:3( 1Cement : 3 Fine Sand) finished neat ( Item of Laying Bricks tiles shall be paid for seperately) |
| 278 | NON - SCHEDULE ITEMS ( OPERATIONAL ITEMS ) : CARPENTARY WORKS |
| 279 | Petty repairs to door / window by reparing thewooden parts /wire mesh /tightening of screws,edge-straightening /wiremesh tightening / adjusting the fittings and hinges as thecase may be, etc. for smooth operation of the shutterscomplete as per site requirement.( Payment shall be made for each door or Window irrespective of no of shutters.) |
| 280 | Replacement/fixing / refixing door/window shutter including removing old shutter and fittings wherever required, refixing of old fittings to the new shutter, adjusting theshuttter by cutting, plaining / easing / oiling for smooth functioning complete. (Payment shall be made for each door / window irrespective of the the Nos. of shutters) |
| 281 | Providing and fixing galvanized M.S. Wire gauze of average width of aperture 1.4mm with wire of 0.63mm dia to door/window etc. complete including taking out the old wire gauge and providing new nails, wooden beading wherever necessary. |
| 282 | Removing/ Replacing the old chowkhat witrh new chowkhat and removing & refixing the old / removed shutters from the old chowkhat to the new chowkhat with new screws / hinges by welding M.S. hinges where necessary and repairing the jambs and reveals with cement mortar 1:4 (1 Cement : 4 Fine Sand) complete in all respects including Providing and layingcement concrete for hold fasts embedding in cementconcrete blocks of 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). (Cost of woodwork /steel work for new chowkhats, shall be paid separately under relevant items.) |
| 283 | a) Door |
| 284 | b) Window |
| 285 | c) Ventilator |
| 286 | Providing and fixing aluminium glass shelf with aluminium frame and 4mm thick glass of rounded edges complete fixed to wooden cleats with screws. |
| 287 | a) 450 x 120 mm |
| 288 | b) 600 x 120 mm |
| 289 | Providing and fixing glass of 4 mm thick for glass shelf with rounded edges. |
| 290 | a) 450 x 120 mm |
| 291 | b) 600 x 120 mm |
| 292 | Fixing / Re-fixing of Glass Shelf / Looking Mirror / Towel Rail like fittings /fixtures / frames by providing wooden pegs (Gitties) / Plasticpegs (Rawl Plugs) with nails / Screws |
| 293 | Providing and fixing in position 5.5 mm thick (approx.) wired glass of approved make with all accessories in the existing openings at all heights in the plant and non plant buildings including all safety equipments and scaffolding etc., if required. |
| 294 | With old Glass supplied by NFL free of cost. |
| 295 | With Glass supplied by Contractor. |
| 296 | Providing and fixing in position toughned/Shatter proof glass of approved make with all accessories in the existing openings at all heights in the plant and non plant buildings including all safety equipments and scaffolding etc., if required. |
| 297 | 5 mm thick glass |
| 298 | 8 mm thick glass |
| 299 | Shifting, removing, fixing of A.C cabinet / frame/coolar at the required location with old available wood of all types of buildings including removing / refixing the window shutters etc. wherever required required complete. |
| 300 | Ground floor. |
| 301 | First floor. |
| 302 | Ground floor to first floor or first floor to ground floor. |
| 303 | Fixing of safety locks in the doors of residential / non-residential buildings including fixing of hooks by screwing in wooden chowkhats/welding of hooks in steel chowkhats. (Safety locks, nuts, bolts, screws and hooks shall be supplied free of charge) |
| 304 | Repair of hydraulic door closer by tightening/loosening the main stud etc. complete. |
| 305 | Providing and fixing bright finished or/and black enamelled/ C.I. helical door spring RITZ make 555 / 333 or equivalent or P & F CI Coil Spring |
| 306 | Providing and fixing wooden cleats / stoppers or like for door / windows of size upto 100 x 50 x 40 mm including cost of necessary hinge and screws wherever reqd. |
| 307 | Fixing the existing wooden pelmets / Curtain Rods on old pegs / by providing new wooden pegs / plastc pegs ( Rawl plugs) with necessary nails / screws |
| 308 | Providing and fixing wooden brackets of 2nd class Kail / Deodar / Hollack wood or like for cupboards/curtain rods of existing pattern with wooden pegs / rawlplugs, nails screws etc.(Set of 2 brackets) |
| 309 | Providing and fixing M.S. oxodized staple only for aldrop/ sliding door bolt/safety hasp & staple. |
| 310 | Providing 25 X 25 X 25 mm 2nd class kail/deodar/hollock wood/ Red marandi PVC plug including cutting brick work and fixing in cement mortar1:3 (1 cement:3 fine sand) and making good walls etc. (Wood required for making plugs /stoppers pegs etc. may be collected from the available wooden scrap free of charge) |
| 311 | Providing and fixing M.S. handles for steel windows 100mm size weight not less than 80 grams |
| 312 | Providing and fixing towel rail complete with brackets fixed to wooden cleats with C.P.Brass screws.: C.P.Brass towel rail with two C.P.brass brackets 600*20 mm size |
| 313 | Providing & Fixing 2mm thick rubber strip to doors upto 75mm wide including fixing with 20mm wide Aluminium strip and Nails Screws Complete |
| 314 | Providing wood work in frames of doors, windows clerestory windows and other frames, wrought framed and fixed in position: |
| 315 | Red marndi ( Without Kiln Seasoning & Chemical Treatment). |
| 316 | Providing wood work in frames of false ceiling, partitions etc. sawn and put up in position: rate same as door frame Red Marndi wood. (Without Kiln Seasoning & Chemical Treatment). Note for Item No.174 to175 :- Existing shutters shall be removed from site, returned to Civil Office Yard and nothing shall be paid for this work. |
| 317 | PLUMBERY WORKS |
| 318 | Providing and fixing CP brass pillar cock of 15 mm nominal bore. |
| 319 | Providing and fixing / replacing SWAN NECK CP brass pillar cock of 15 mm nominal bore for Laboratory Sinks. |
| 320 | 3 Way Outlet |
| 321 | Repair of Brass / CP / PTMT Bib cock/Stop cock by providing & replacing leather/ PVC washer/ Jumper Valve. for : 15 mm nominal bore |
| 322 | Repair of Brass / CP / PTMT Pillar cock / Bib cock / Stop Cock etc. by providing & replacing standard brass face with washers for : 15 mm nominal bore |
| 323 | Repairs and rectifications of Low Level / high level Flushuing Cistern by providing & fixing / replacing spare parts for non-leakages and smooth functioning of the Cistern as under: |
| 324 | PVC siphon set complete |
| 325 | PVC Knob / Handle with washers |
| 326 | By adjusting Syphon / Ball Cock / Lever Arm / Float ball |
| 327 | By providing & fixing Ball Cock / Lever Arm / Float ball/Set of rubber washers./PVC Knob / Handle with washers etc. |
| 328 | Repair of Sensor urinal by checking, cleaning and other petty repair & make them operational |
| 329 | Repair of Sensor urinal by replacing all batteries & make them workable etc. (all material shall be arrange by contractor at its own cost) |
| 330 | Repair of Sensor urinal by Replacing Sensor device compete & make them workable etc (all material shall be arrange by contractor at its own cost) |
| 331 | Re-fixing of flush tank, washbasin, urinal of any size with required screw, rawlplug etc etc (all material shall be arrange by contractor at its own cost) |
| 332 | Providing and fixing white vitreous china flat back half stall urinal of size580x380x350 mm with fittings, standard size flush pipe(pvc pipe), spreaderswith unions and clamps (all in C.P. brass/pvc) with waste pipe & fitting as per IS :2556, C.I. trap / uPVC Flow Trap, PTMT urinal cock, coupling, waste pipe,outletgrating with hole for waste pipe including painting of fittings and cutting and making good the walls and floor wherever required : (Single half stall urinal). |
| 333 | Providing & fixing PVC syphon set for 5 to 15 ltr CI automatic flushing cistern. |
| 334 | Providing and fixing C.P.Brass close hole basin mixer pillar tap of approved quality and make weighing not less than 1970 Grms. |
| 335 | 15mm nominal bore of standered back type |
| 336 | Providing and fixing / Replacing CI / PVC (Heavy duty), P or S Trap for WC seatof size 75-100 mm with necessary material including dismantalling the old damaed piece. |
| 337 | Providing and fixing PVC / C.P. brass waste for sink or wash basin |
| 338 | a) 32 mm dia |
| 339 | b) 40 mm dia |
| 340 | Providing and fixing PVC/C.P. brass waste for stainless steel kitchen sink of size upto 75 X 40 mm with rubber gasket etc. complete set. |
| 341 | Providing and fixing GI fittings such as Clamp, Plug, Nipple (upto 200 mm long), elbow, tee, socket, union, reducer etc. |
| 342 | For 15 mm nominal bore G.I. pipe line. |
| 343 | For 20 mm nominal bore G.I. pipe line. |
| 344 | For 25 mm nominal bore G.I. pipe line. |
| 345 | For 32 mm nominal bore G.I. pipe line. |
| 346 | For 40 mm nominal bore G.I. pipe line. |
| 347 | Fixing of G.I.Pipe lines issued free by NFL (Necessary fittings wherever required to be fixed in laying the pipes shall be arrangedby the contractor which shall be paid for separately. Excavation, Cutting chase in walls / floors wherever required shall also be paid separately) Internal / external work |
| 348 | 15 mm nominal bore |
| 349 | 20 mm nominal bore |
| 350 | 25 mm nominal bore |
| 351 | Providing and fixing / replacing drain pipe of Sinks / Wash Basins consisting of GI reducer/GI socket and pipe of length 0.6 to 0.8 mtr. |
| 352 | 32 mm nominal bore |
| 353 | 40 mm nominal bore |
| 354 | Removing chocking of G.I. Distribution line by unscrewing the pipes, removing the chocking by cleaning the pipes and refixing the same : |
| 355 | 15 mm nominal bore |
| 356 | 20 mm nominal bore |
| 357 | Dismantling geyser of any capacity and closing the water supply linewith necessary plugs and depositing the geyser as per the instructions of Engineer-in-Incharge. |
| 358 | Fixing the geyser upto any litres capacity with necessary pegs and nut bolts and providing water connection from the nearby water line (The fittings like GI nipples, stop cock, GI pipe will be paid separately) |
| 359 | Providing and fixing Copper or lead connection pipe with brass unions for Gyisers |
| 360 | 15 mm nominal bore , 450 mm long |
| 361 | 15 mm nominal bore , 600 mm long |
| 362 | MASONARY WORKS : |
| 363 | Brick work with available old bricks in Cement Mortar 1 : 6 ( 1 Cement : 6 Fine sand), including cleaning i.e. removing mortar from the bricks : In Foundation & Plinth |
| 364 | Brick work with available old bricks in Cement Mortar 1 : 6 ( 1 Cement : 6 Fine sand), including cleaning i.e.removing mortar from the bricks : In Superstructure upto floor V level |
| 365 | Providing & laying Flat brick flooring with / without herring bone bond including cement slurry complete in cement mortar 1:4 (1 Cement : 4 FineSand ) with bricks of class designation 75. |
| 366 | Brick on edge flooring with / without herring bone bond, with available old Bricks includingcement slurry and cleaning of bricks complete in cementmortar 1:4 (1 Cement : 4 fine Sand) |
| 367 | Extra for brick flooring laid diagonal herring bone bond or other pattern as specified. |
| 368 | Cement concrete flooring 1:2:4 (1 cement:2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. |
| 369 | 25mm thick with 12.5mm nominal size stone aggregate. |
| 370 | 50mm thick with 20mm nominal size stone aggregate. |
| 371 | Marble chips plastering over kitchen platforms rubbed and polished to granolithic finish, top layer 6 mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from smallest to 4 mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1marble powder) by weight in proportion of 4:7 (4 cement marblepowder mix : 7 marble chips) by volume : |
| 372 | 18 mm thick with under layer 12 mm thick in cement plaster 1:3 (1cement : 3 coarse sand) : Ordinary cement without any pigment. |
| 373 | Providing and fixing homogeneous Polyvinyl chloride sheet/tile in flooring and skirting in approverd patternon a smooth and damp proof base using rubber basedadhesive of approved quality and manufacturer likedunlop S-758, fevicol SR 998 or equivalent includingrolling with light wooden roller weighing about 5 kg.all complete as directed by the Engineer-in-charge inapproved colour and shade. |
| 374 | 2.0mm thick tile. / Sheet |
| 375 | Making small bands ( Bannies ) of size upto 50 x 30 mm and upto 1200 mm long with cementmortar 1 :4 ( I Cement : 4 Coarse Sand ) near any door entrance |
| 376 | Repairs to RCC chhajjas of all sizes and thickness including dismantling the damaged portion and redoing the same with cement concrete/ cement mortar, scaffolding, centering, shuttering and finishing complete ( Bottom Size of Chhaja to be measured for payment. Cement consumption shall be 0.10 Quintal / Each Chhaja) |
| 377 | Rectification of seepage from WC, Floor trap etc. including required demolishing of floor, brick walls etc. and making good the same in original condition to make it leak proof. Other items i.e. Sanitary installations shall be paid separately if required. (1/3 bag cement consumption). |
| 378 | Supplying and mixing Sodium Carbonate (Washing Soda) with Cement / Cement mortar / Cement Concrete in the ratio as per site requirement for emergent repairs, as per the instruction of Engineer-in- charge |
| 379 | ROOFING WORKS : |
| 380 | Providing and fixing plain Polypropylene reinforced cement sheet Ceiling of approved quality with necessary nails etc. complete (Frame work to be paid seperately) 6mm thick. |
| 381 | Providing & fixing 2mm thick translucent sheets or Polycarbonate or FRP (fibrereinforced plastic) roofing and fixing withpolymer coated J or L hooks bolts and nuts 8mm dia G.I. plain and bitumen washers complete excluding the cost of purlins,rafters and trusses:Corrugated / Plain sheets at all heights |
| 382 | Upto 60 degree pitch or on vertical position |
| 383 | Fixing Plain / corrugated GI / AC / FRP / Aluminium etc. sheets atall heights by removing the existing sheets if necessary (only FRP/GI /AC /Aluminium / sheets shall be supplied by department freeof cost). Hooks with nuts & bitumen / limpet washers, if required, shall be arranged by Contractor athis cost without any extra claim. |
| 384 | Repair of cracked AC sheets in patches (area of single patch not exceeding 0.50 Sq.M ) by fixing old AC Sheet pieces by providing and applying sealing compound wherever required at all heights etc. complete |
| 385 | Removal of choking in CI / AC/unplasticised PVC rain water pipe, after dismantling the CI / AC/unplasticised PVC bend wherever required and replacing by new one if required and making good the wall / khurraetc. (bend if provided will be paid separately). |
| 386 | Providing and fixing 6mm ACC sheet louver ( 1.25 X 1.05 M ) inCooling Tower including filling the side joints (Adhesive compoundand SS Washers, nails etc. shall be supplied free by NFL wherever required.) |
| 387 | Providing and fixing 6mm ACC sheet louver upto 350 mm wide, with overlapping upto 200 mm, on the sides of Blower Houses, Compressor Houses or at any other location including replacement of existing double threaded steel studs of 8 mm dia of required length with wahers & nuts etc. complete in all respect. |
| 388 | Providing & Fixing / replacing 8 mm dia double threaded steel studs upto 350 mm length with 4 Nos. nuts & washers (Complete Set) for ACC louvers of Blower House / Compressor Houses or at any other location |
| 389 | Providing and fixing / replacing with polymer coated 'J' or 'L' hooksof required size ( 8 mm Dia) with bitumen / Limpet washers in existing or New ACC / CGI / FRP /Aluminium / RMP sheetroofing in place of GI hooks, at all heights. |
| 390 | Cleaning and removing chocking form gutters, including removal of debries up to ground, tightening the nuts andboltsand or providing new nutsand bolts washers etc. after removing the old/ damaged nuts/ bolts washers etc. to the supports of gutters . |
| 391 | AC/GI or any make gutters of any size at any height |
| 392 | Providing and fixing on wall face unplasticised PVC (Working pressure 4 Kg per sqcm) rain water pipes confirming to IS:4965 including jointing with sealring confirming to IS:5382 leaving 10 mm gap for thermal expension. Including all fittings Coupler / Bend / Shoe/socket |
| 393 | 160 mm diameter. |
| 394 | Providing and fixing on wall face unplasticised PVC moulded fittings/ accessoriess for unplasticised PVC rain water pipes confirming to IS: 4965 including jointing with seal ring confirming to IS:5382 leaving 10 mm gap for thermal expansion. |
| 395 | Coupler 160mm : Coupler / Bend / Shoe |
| 396 | Providing & fixing water proof ply on/around fan hoods of cooling/ stipping towers or on any portion interior/exterior of the said structure or anywhere in the plant area / Township Area, with necessary nails/ scews including fixing the ply wood in the shape as per site requirement complete. |
| 397 | 12mm thick marrine / water proof ply |
| 398 | 9 mm thick marrine / water proof ply |
| 399 | 6 mm thick Commercial Ply |
| 400 | 3mm to 4mm thick commercial ply |
| 401 | 3mm to 4 mm thick teak ply |
| 402 | Labour charges for fixing old available water proof ply / commerial ply in cooling/ stipping towers at various height or on any portion interior/exterior of the said structure or any where in the plant / Township area with necessary nails / scews including fixing the ply wood in the shape as per site requirement (payment for actual ply wood area shall be made) |
| 403 | 12mm / 9 mm thick |
| 404 | 6mm / 4mm thick |
| 405 | MISCELLANEOUS WORKS : |
| 406 | Repair of rolling shutters including setting the dislocated M.S.strips by welding strengthening guides, embedding the lugs in wall,oiling and greasing complete by making rolling shutter perfectly operable (Spare parts shall be paid separately). |
| 407 | Repair of collapsible & steel gates by providing necessary accessories like nuts, bolts washers etc. including streightning / welding / rivetting greasing bottom and top channel and making the shutter operational . |
| 408 | Fixing / tightning or Repairing IRC, BRC fabric / expanded metal jali / Chain Link Fencing with necessary nails / revets / steel wirefor tightning etc. on wood or steel work (Fabric/Jali, Chain link fencing etc. for replacement shall be supplied free by NFL) |
| 409 | Fixing tightening and repairing of six/nine rows of barbed wirefencing having diagonals and concertina wire along with 03 nos RBT. Linear measurement only be paid.( on Ground or at top of Boundry walls) |
| 410 | Six rows / concertina Fencing on top of Boundry Wall |
| 411 | Nine rows / 'Y' fencing at top of boundry wall |
| 412 | Extra charges for providing new MS barbed wire at missing locations / replacing the old damaged barbed wire ( Weight of Barbed wire to be considered as 9.38 Kg/ 100M) |
| 413 | Cutting of grills of windows for fixing of A.C. / Desert Coolers or fixing of available grills in the existing openings or windows with nails/ screws and/or welding the available pieces of M.S.rods/ flats complete. |
| 414 | Repair/maintenane of Aluminium doors in control rooms or other places at all heights including replacement of cap Washers of hinges, oil seals of floor doorsprings, greasing fixing of damaged / missing rubber/neoprene Gasket etc. replacement of damaged / missing aluminium sanp beeding, removal and installation of shutters if required to make it in good working condition complete in all respects as per the direction of Engr-in-charge ( Rubber/neoprene gasket and Aluminimum snap beeding shall be paid seperately, but nothing extra shall be paid for the minor replacements.) |
| 415 | Tracing and plugging of leakage point in underground pipe lines of GI/MS/CI/ RCC/ SW pipes etc.by providing and fixing wooden plugs, MS sockets/Cement mortar joints etc. and with necessary welding as per site requirement. (Dismantling of RCC/ WBM /Premix, excavation, and mass cement concrete including installation of pump for dewatering & making good the surface by back filling and compaction etc. shall be paid separately in relevant items of schedule). Electricity for welding shall be supplied free of cost, if required. |
| 416 | For dia of pipe upto 100 mm |
| 417 | For dia of pipe from 101 mm to 300 mm |
| 418 | For dia of pipe from 301 mm & Above |
| 419 | Excavation of dry / deposited Ash / Carbon in trenches, drains or in open areas Including lift upto 1.5 mtr. and farely dressing the area complete With a lead upto 100 Metres |
| 420 | Carriage and Filling in plinth with sand / Ash under floors including, watering, ramming, consolidating and dressing complete with in NFL permisses( Sand/ Ash shall be supplied by NFL free of cost) |
| 421 | Cleaning of overhead tanks on top of roof of Residential / Public buildings including draining out water, removal of algi, cleaning of sides and bottom of the tank complete. |
| 422 | Hiring charges for arranging dewatering diesel pump with necessary suction and delivery pipes for dewatering any type of water through broken water mains etc. including operator. (payment shall be made on actual running hours basis for which the pump is operated for particular job. 1 working day means 8 hours. Diesel is to be arranged by the Contractor at his own cost ). Pump of capacity 5 H.P. (minimum) with suction / delivery of 50mm dia (minimum). |
| 423 | Hiring charges for welding set with one welder, welding rods and leads for doing any petty welding job (with free electricity connection and power supplied by NFL). (payment shall be made on actual operating hours basis for which welding set is operated for particular job. 1 working day means 8 hours. welder, welding rods, Fuse box etc to be arranged by the Contractor at his own cost ). |
| 424 | Hiring charges for tractor with Operator, Diesel / Oil and accessories like Plougher / Harrower / Trolley, etc. for ploughing/harrowing the ground (Payment shall be made for working hours only) |
| 425 | Hiring charges for JCB ( Mechanical Excavator ) with Operator, Diesel / Oil for urgent excavation / dozing to be arranged by the Contractor at his own cost. (payment shall be made on actual operating hours basis for which JCM Machine is operated for particular job. 1 working day means 8 hours.) |
| 426 | Hiring charges for JCB Breaker with Operator, Diesel / Oil for urgent heavy RCC foundations /structures dismantling (payment shall be made on actual operating hours basis for which JCB breaker is operated for particular job. 1 working day means 8 hours.) |
| 427 | Hire charges of Road Roller - 8 to 10 tonne capacity with Operator, Diesel /Oil for urgent compaction jobs (payment shall be made on actual operating hours basis for which Road Roller is operated for particular job. 1 working day means 8 hours.) |
| 428 | Removing RCC precast slabs/ greating covers for repairing / cleaning of drains/cable trenches and replacing the same in position as if required as per direction of Engineer-in-Charge. |
| 429 | Slabs of span upto 0.50 Metre |
| 430 | Slabs of span upto 1.00 Metre |
| 431 | Slabs of span upto 2.00 Metre or more |
| 432 | Grinding the existing Marble stones / Mosaic floors, skirting, dados, platform, or any other area manually or by machines including finishing, polishing complete ( The grinding stone, machine, polish & detergents will be arranged by the contractor at his cost) |
| 433 | Ordinary finish / Diamond Finish |
| 434 | Providing, embedding and fixing small pieces of broken glass in Cement mortar 1 : 3 on top of Boundry wall to it's entire width (Glass pieces to be collected from scrap. Cement Mortar shall be paid seperately under respective item of SOQ.) |
| 435 | Supplying empty cement bags filled with earth / Ash and placing inposition including all lifts and leads in or under water (Available earth / Ash from near by location shall be used) |
| 436 | Cutting / uprooting / removal of breedings of peeple trees/ or any other saplings / breedings from top of roof/side walls or any other area and disposal of the same with lead upto 1 KM. |
| 437 | Providing & Fixing Sun Control Film ( Garware or equivalent make) in required shade and colour including cleaning etc. complete on window / door / partiion glass panes. |
| 438 | Jointing old bricks work in F.P.S. system with new brick work in cementmortar 1:4 (1 cement: 4 coarse sand) in metric system. |
| 439 | (All previous hourly conversion done to std Working Day) Execution of any job non-susceptible to measurement which includes all minor consumable material, tools and tackles and the payment shall be on basis of working hours (Major consumable / material shall be supplied by NFL and the decision of the Engineer-in-Incharge in this regard shall be final.) |
| 440 | Skilled (Mason / Carpenter / Plumber / Technician / office Staff etc.) |
| 441 | Unskilled. |
| 442 | White washing / painting of trees with lime/exterior emulsion with one or more coats upto 2 meter height and girth upto 0.75 meter. |
| 443 | a) With lime wash |
| 444 | b) With Apex or equivelent exterior paint as approved by Engr in charge |
| 445 | Painting the flower pots of all sizes with readymix / enamel paint in all shades to give a smooth finish : Old or New Pots |
| 446 | Painting the flower pots of all sizes with exterior emulsion paint paint in all shades : Old or New pots |
| 447 | Making arrangements for preparation of ground, stage, approach path etc. for various functions by : Painting the Flag Post, Flag stage, wellcome gates, cemented kerbs on the berms of welcome gates, Structural poles & Chains, with one coat of enamle paint of requied shade, transporting the poles / chains / other materials from NFL's stores to site of work, fixing the poles by excaviting holes, marking the lines with lime around the stage, spreading sand on the approach path of stage, Dismentalling of the posts & Chains after the function and depositing the same in NFL's store complete |
| 448 | Laying Brick Teeth Edging with available brick by laying the dry bricks one over the other at an angle of approx. 30 deg. Including necessary excavation, backfilling, spreading the surplus earth, and providing requred no. of coats with white wash complete. ( Bricks shall be supplied free by NFL) |
| 449 | Supplying of different materials at site for organising the official functions / ceremoneys / emergent repairs etc. : |
| 450 | a) White lime |
| 451 | b) Surkhi ( GERU ) |
| 452 | c) 2nd Class bricks ( Class designation 50) |
| 453 | d) Dam-it of M/s STP Make |
| 454 | e) Sealing Compound of M/s STP |
| 455 | f) Self Adhesive Flash Strip size 10 Mtr. X 100 mm of M/s STP |
| 456 | g) Rolling shutter spring -27.5 Cm long wire spring grade no. 2 |
| 457 | h) Crushed stone 2.36 mm to 12.5 mm size |
| 458 | i) Self-Drilling/Self-Tapping Screws M-6 25mm long |
| 459 | j) M-60 grade cemetitious grout (Non Shrink) / Micro-concrete of make (SIKA/FOSCROC) |
| 460 | k) Roof Waterproofing compound of make (Birla / Pidilite / FOSCROC/ SIKA) |
| 461 | l) Bitumen cold premix for pothole repair of make (MAKPHALT/ TARCO/ ShelMac PR and as per relevant IS code /IRC specifictaions |
| 462 | Hacking R.C.C./P.C.C. surface for roughening to get a good bond including disposal of rubbish (Any where in NFL Complex) |
| 463 | Chipping of plain cement concrete or R.C.C. upto 10 mm depth on floors, walls, roofs, columns pillars for exposing reinforcement or for roughening the area at all heights and depths. |
| 464 | Making pockets in R.C.C. or P.C.C. upto 200 mm depth/with size of pockets upto 150x150 mm on vertical / Horizental surfaces at all heights & depths complete including making good wherever required. |
| 465 | Making pockets, in bricks work in cement mortar, upto 200mm depth with size of pocket upto 200x200mm on vertical / Horizental surface at all heights & depth complete including making good wherever required. |
| 466 | Providing and fixing / replacing following fittings / fixtures of Aluminium Doors / Windows |
| 467 | Aluminium Snap Beeding |
| 468 | Rubber Gaskets |
| 469 | Fine dressing of ground |
| 470 | Surveillance of old ash ponds near Factory Areas, by keeping watch and ward of the earthen dykes to safe guard them from any damage due to flow of Ash Slurry/Water in the Pond or pilferage of earth and cutting of trees etc. Patrolling of Ash Slurryline from Factory to Ponds and intimating regarding the leakages in Ash slurry lines twice a day. Surveilance shall be carried out dailyfrom 8.00AM to 5.00 PM, |
| 471 | Strengthening the embankment of ash ponds at village Dahar and/ or old ponds on North of NFL Plant or at any location in Factory/Township area by supplying good earth (at required locationofearthen embankments of the ponds) from any leadand liftincluding excavation carriage,loading/unloading and royality etc., banking the earthin layers not exceeding 20 Cm. in depth breaking clods, watering and ramming each layer with wooden or steel rammers on top and sides of the dyke to fillup the rat / snake holes, ruts and gully formations etc. and dressing up the embankment including all leads and lifts as per the directionns of engineer in charge. (The earth supplied shall be measured in stacks and shall be reduced by 20%towards voids for payment purpose.) |
| 472 | Excavation of ash within the Ash Ponds in trenches/ drains including getting out excavated Ash lift upto 1.50 Mtr.and lead upto 50 Mtr., dressing of the excavated /disposed off ash wherever required, complete as per directions of Engineer- in -Charge |
| 473 | Extra charges for doing all types of concrete/brick work inside of coal / urea conveyer galleries and in LSHS(Oily surface), Final Effluent Ponds / Pump House areas, on or within ash ponds, Carbon Ponds or any other unapproachabale area where head lead is more than 50 mtrs. including making proper approach by cleaning / preparation of surface etc. complete. |
| 474 | Fixing 1.6mm thick plain G.I / S.S. Sheet valley gutter at all heights inplant buildings with all fixtures and accessories like bitumenwashers, G.I. Nuts & bolts, hooks, white lead etc.including two coatof High Build Bituminious paint over a coat of primer after replacingthe old existing gutter and dismantelling of existing gutters,A.C./G.I.Sheets/PVC pipes/Wired glass and refixing the same forreplacing the existing damaged gutters with new gutters, makingholes for fixing mouth pieces etc. for fixing the down take rain waterpipes.Necessary 150mm overlaps ( Longitudinal & Cross wise) are tobe provided with rubber gaskets and two layers of rivets/ nut boltsfor making the joints leakproof. The work is to be executed as perdirection of Engineer-in-charge. |
| 475 | (The 1.6 mm thick GI / SS sheet for fabrication of gutter shall be issued free of cost by NFL from NFL stores and all other material shall be arranged by contractor at his own cost. Nothing extra shallbe paid on account of carriage of material from NFL stores to working place) |
| 476 | SEWAGE PUMP HOUSE: Operation and maintenance of Sewage / Dewatering pumps installed in Township Sump Pump House and Pumps installed at culvert No. 120 near Railway under bridge crossing on Township Road, for pumping out the sewage to ETP in Plant Area / effluents to Ash Ponds respectively by priming / operating the sluice valves etc, operating the dewatering pump for dewatering the leaked water from pumps & sluice valves installed in the pump house and minor maintenace of pumps and sluice valves such as oiling and greasing of pumps including all tools and tackles as per instruction of Engineer-in-charge. |
| 477 | The operation shall be carried out between 6.00 am to 2.00 pm & 2.00pm to 10.00 pm daily. |
| 478 | Extra for additional shift for Item No. 1 (a) Shift from 10.00 PM to 6.00 AM |
| 479 | PUMPS INSTALLED AT CULVERT No. 120 |
| 480 | The operation shall be carried out for one shifts i.e. from 8.00 am to 5.00 pm daily. |
| 481 | Extra for additional shift for Item No. 2 (a) Shift from 5.00 PM to 8.00 AM |
| 482 | Providing and laying 100mm thick factory made cement concrete interlocking paver block (ISI Marked) of M -35 grade made by blockmaking machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. |
| 483 | Providing services for the spacialized jobs from the reputed architect/interior designer/ architectural agency who are in this business. The services may include the site visit, discussion, preparing of drawings/supervision and regarding the selection of colour, shade, size of fittings/fixtures/ interior design etc., whichever required. For the purpose of payment the billed value raised by the expert/architect etc. for providing such service, supported by cash receipt / vouchers shall be considered against this item. |
| 484 | Repair of removable raised /false flooring with all components installed at different plant location for different plenum height all complete, as directed by Engineer-in-charge |
| 485 | Providing & Fixing Chrome finishing Hand Operated Health Faucet with flexible SS Tube of minimum 1 meter length, wall hook etc. complete |
| 486 | Uprooting peepal tree/ wild growth on top of roof / wall/ plinth protection by taking out brick tiles and weeding out the roots of plants and raising up the depressed/ damaged tiles and repointing and raising up the depressed/ damaged tiles and repointing the area attended with cement mortar 1:3 (1-Cement: 3-fine sand) wherever required including filling earth below brick tiles wherever required site complete all as per instructions of the Engineer-in-charge. |
| 487 | Providing and Fixing bend for PVC low level flush cistern as approved by Engineer-in-charge. |
| 488 | Long bend. |
| 489 | Short bend. |
| 490 | Removal of all types of building rubbish / dust depositing as well as algee and other wild growth from roof and chajjas and finally cleaning the surface by wire/ coir brushes and disposal of the aforesaid rubbish to nearby dumping yard at ground level at all leads. |
| 491 | Public Buildings (Adm. Building, Canteen, CISF Buildings, Main Gates in Plant) & (Hospital, Shopping Centre, Employee Union office, Avanti, Kalindi, Club, MK etc. in Township). |
| 492 | Residential buildings (SGP Buildings, Old / New Ammonia/GTG, Urea/Bagging, O&U etc. in Plant) & (D-type quarters/ as per requirement) |
| 493 | Providing and laying S.W.R (uPVC Type B) pipe of dia 200 mm having minimum wall thickness 4.9mm including all fittings likeTee, elbow, coupler, Bends on any other fitting needed at Site etc. Jointing to be done as per IS 7634 (part 3) |
| 494 | Cleaning of storm water/open surface kutcha/pucca drains, Channels and culvert by removing grass, vegetation, slush mud, rubbish, brick bats, thermocoal, aggregate, rottencloth,pieces of bamboo/ballies, empty drums,precast slabs,etc.and transporting the same upto a lead of one K.M. (i.e. anywhere within Township) in a low lying areas and exposing pucca surface of the drains neatly as per instructions of Engineer-in Incharge. Removed precast slabs shall be refixed as it is |
| 495 | For any depth of drain |
| 496 | Providing and fixing prepainted galvalume (AZ) profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50mm base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc aluminium alloy coating150grams per sqm as per IS 15961 and yield strength 550 in mpa steel grade as desired by Engineer-in-charge the sheet shall be fixed using self drilling/self tapping screws of size with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. The manufacturers/Brand/makes of sheets to be used in this work shallbe: Durashine of M/s. TATA, Colouron+ of M/s JSW or Equivalent makes having the following specifications: 1) Minimum yield strength of 550 Mpa required for roofing work 2)Having AL-ZN alloy coating(55% Al, 43.4% ZN,1.6% Si) alias (AZ 150) |
| 497 | Attending various types of jobs pertaining to Masonry/ Carpentering/ Plumbing/ Steel Structural, jobs in different locations of Township Area. For this purpose contractor has to deploy two persons (one skilled and one unskilled), which will be treated as one unit of operation. All material required for the job shall be supplied by the contractor (Except Cement andTor steel provided by NFL free of cost). |
| 498 | (a) Attending at least Five complaints for repairing old/existing brick work/Brick Tiles with old bricks available at site/ Civil store of Township including carriage of required material from one site to another. Note: Atleast Five complaints shall be attended for the constituition of one operation. (b) Attending at least Five complaints for patch plastering with Cement SandMortar of small areas (upto 2 Square meters) in different locations of Township area the item includes the carriage of cement / sand required for the job at different locations, where all material except Cement is provided by the Contractor. Note: Lump sum Consumption of cement to be taken as 0.43 Quintal/Five complaints attended. (c) Petty repairs to door / window by reparing the wooden parts / wire mesh/tightening of screws, edge-straightening / wiremesh tightening / adjusting the fittings and hinges as the case may be, etc. for smooth operation of the shutters complete as per site requirement. Note : Atleast Ten windows and Ten doors shall be repaired for the item to be treated as one operation (irrespective of no. of shutters). (d) Replacing the old/existing worn out horizontal / vertical member of Chowkhats at least three in numbers in different/ same location in T/ship, including removal of the old/ existing member including carriage of new/workable wood at the site of job Note: Atleast Four complaints shall be attended for the constituition of one operation. (e) Fixing of atleast one Indian (Orrisa type)/E.W.C seat which is provided by applicant/ Civil department in Township area, the dismantling, carriage & Disposal upto 1 Km lead of rubbish material shall be included in the item. PCC shall be paid seperately as per the relevant item. Note: Atleast one complaint shall be attended for the constituition of one operation |
| 499 | Providing and fixing glazed shutters for doors, windows & clerestory windows using 4 mm thick glass panes including ISI marked M.S. butthinges bright finished of required size with necessary screws. |
| 500 | Marandi wood - 30 mm thick. (Without Kiln Seasoning & Chemical Treatment) |
| 501 | Providing and fixing wire gauze shutters for doors, windows and clerestory windows using galvinised M.S. wire gauge of average width of aperture 1.4mm with wire of dia of 0.63mm including ISI marked bright finished or/and black enamelled M. S. butt hinges with necessary screws. |
| 502 | Marandi wood - 35 mm thick.(Without Kiln Seasoning & Chemical Treatment) |
| 503 | Marandi wood - 30 mm thick. (Without Kiln Seasoning & Chemical Treatment) Note: for above wooden item(s) i.e doors / windows work, existing shutters shall be removed from site, returned to Civil OfficeYard and nothing shall be paid for this work. |
| 504 | Note: (i) Before quoting the rates, please go through the Clause No.6.0 of GTC to remain the competitive bidder. (ii) GST as per GTC Clauses shall be paid extra. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayOct 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender