Tender For Construction Of Waste Water Drainage System To Connect All Cook Houses, Bathrooms And Toilets At 1 Vikas (Sff), Doom Dooma Under Ge (Af) Chabua
Tender Value
46.32 Lakhs
Estimated cost
Bid Submission
20 Oct 2026
16 days left
EMD
92640
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dibrugarh → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Waste Water Drainage System To Connect All Cook Houses, Bathrooms And Toilets At 1 Vikas (Sff), Doom Dooma Under Ge (Af) Chabua
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in trenches, n exc 1.5m wide & n exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan & getting out in soft/loose soil complete all as specified and directed. |
| 2 | Removing excavated soil exc. 250m but n exc 500m & depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. |
| 3 | Returning, filling in, including spreading, levelling, watering & well ramming in layers n. exc 25 cm in soft/loose soil complete all as specified and directed. |
| 4 | Hard core of broken stone boulders n exc 63mm, deposited, spread, leveled in layers n exc 15cm thick each layer including watering and well ramming to a true surface complete all as specified and directed. |
| 5 | M&L for PCC type C-2 1:3:6 (using 40mm agg) as in foundations, filling and mass concrete over rammed earth complete all as specified and directed. |
| 6 | M&L for Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM (1:3) complete all as specified and directed. |
| 7 | M&L for Brickwork with sub-class ‘B’ bricks in brick-on-edge walls (less than ½ brick thick), built in cement mortar 1:3 complete all as specified and directed. |
| 8 | M&L for PCC type B-2 , 1:2:4 (using 12.5mm agg) as in surface channels and drains complete all as specified and directed. |
| 9 | M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4) in drain walls etc incl neeru finish to plastering complete all as specified and directed. |
| 10 | M&L cement concrete 1:2:4 type B-0 (using 12.5 mm graded aggregate) in coping, haunching, benching of drains complete all as specified and directed. |
| 11 | Extra for forming fair finished drain or channel 30 cm to 45 cm inner girth in cement concrete, using extra cement, incl forms, moulds, mitred/ stopped ends etc complete all as specified and directed. |
| 12 | M&L for reinforced concrete pipes 300mm bore, class NP-3, cement jointed complete with collars complete all as specified and directed. |
| 13 | Demolition of cement concrete ( unreinforced ) in ground floors and pavings exceeding 15 cm thick above or below ground level, including removing of demolished material from work site at any distance outside MD land complete all as specified and directed. |
| 14 | Extra for forming fair finished drain or channel 10 cm to 30 cm inner girth in cement concrete, using extra cement, incl forms, moulds, mitred/ stopped ends etc complete all as specified and directed. |
| 15 | S&F framed work such as grills gratings, etc, with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, framed and hung as gates, including pintle hinges, holdfasts etc, pivots to be fixed in PCC as directed by Engr-in-Charge, stops, hand made MS sliding bolts, tower boldts incl ornamental and design etc complete all as specified and directed. |
| 16 | M&L for preparation of new surfaces of steel and applying two coat synthetic enamel paint over a coat of red oxide complete all as specified and directed. |
| 17 | Supply and fixed 110 mm bore PVC (SWR) pipes single socketed ISI marked IS-13592, type 'B' in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 18 | Supply and fixed 160 mm bore PVC (SWR) pipes single socketed ISI marked IS-13592, type 'B' in any length with rubber ring joints laid in trenches or in floors type complete all as specified and directed. |
| 19 | Material and labour for Plain cement Concrete (1:3:6) type C-2 bed to 160 mm bore drain pipes including packing under , and haunching against the sides of pipes after they are laid and tested ;in complete all as specified and directed. |
| 20 | Supply and fixed PVC (SWR) T/ bends 110 /160 mm bore with access door complete all as specified and directed. |
| 21 | Excavating over areas and n exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan & getting out in soft/loose soil complete all as specified and directed. |
| 22 | Excavating over areas 1.50m but n exc 3.00m in depth and getting out in soft/loose soil complete all as specified and directed by Engineer-in-Charge. |
| 23 | Hard core of broken stone boulders n exc 63mm, deposited, spread, leveled in layers n exc 15cm thick each layer including watering and well ramming to a true surface complete all as specified and directed. |
| 24 | M&L for PCC type C-2 1:3:6 (using 40mm agg) as in foundations, filling and mass concrete over rammed earth complete all as specified and directed. |
| 25 | M&L for Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM (1:3) complete all as specified and directed. |
| 26 | M&L for loose filling with Brick Bats of gauge 40 to 80 mm Soage well complete all as specified and directed. |
| 27 | M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4) in drain walls etc incl neeru finish to plastering complete |
| 28 | M&L for formwork to rough finished flat surfaces of soffits of suspended slabs such as roof slabs, floor slabs and landing and similar works complete all as specified and directed. |
| 29 | M&L for reinforced cement concrete nominal mix type B0 1:2:4 (using 20 mm graded aggregate) for slabs supported on walls, landings and like etc complete all as specified and directed. |
| 30 | M&L for mild steel TMT bars 8 mm dia and over cut to length, bend to shape required including cranking, bending spirally for hooping for column hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysOct 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender