Tender For Repair To Barbed Wire, Concertina Coil, Plastering, Kerb Stone Paver Block, Connecting Passage And Other Conncected Work In Domestic Area At Afs Stn Yelahanka.
Tender Value
45 Lakhs
Estimated cost
Bid Submission
21 Oct 2026
19 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Barbed Wire, Concertina Coil, Plastering, Kerb Stone Paver Block, Connecting Passage And Other Conncected Work In Domestic Area At Afs Stn Yelahanka.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of fencing wire mesh, any type complete all as specified and directed. |
| 2 | Dismantling of fencing posts (wood, steel or R.C.C.) of any section fixed in conrete, brick work, masonry etc complete all as specified and directed. |
| 3 | Excavation in post holes (or similar holes) in soft/loose soil each n. exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n. exc 25cm, watering, and removing surplus soil to a distance n. exc 50m and making good surface complete all as specified and directed. |
| 4 | M & L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in Foundation filling and mass concrete complete all as specified and directed. |
| 5 | S&F for precast reinforced cement concrete in type B1, 1:2:4 (20 mm graded stone aggragate) as in precast fencing post and struts, size exc 100 sq cm and n. exc 250 Sq cm average or any sectional area etc all as specified and directed. |
| 6 | S&F MS Angle iron post or struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mest etc) including all necessary drilling bolting or riverting each and similar work confirming to FE 290 Gde E-165 complete all as specified and directed. |
| 7 | Supply only PVC coated chain link MS galvanised fencing, 4mm dia wire and 50x50mm pitch, complete all as specified and directed. |
| 8 | Supply only MS galvanised medium coated as per IS 4826 fencing made out any dia and any size complete all as specified and directed. |
| 9 | Fixing only chainlink fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts,etc. including provision of binding wire complete all as specified and directed. |
| 10 | Supply only 4mm dia galvanised medium coated steel wire cut to length as required for fixing chain link fencing etc complete all as specified and directed.(Note :-Fixing of Line wire is included in above item No) |
| 11 | S&F in repair galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails strain-ing bolts, including, tying at crossing with and provision of galvanised mild steel wire, staple oe steel pins etc complete all as specified and directed.(Each line wire to be measured) |
| 12 | S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10cm long, diameter of neck in 5 to 10 mm complete all as specified and directed. |
| 13 | M&L for preparation of new steel & iron surfaces n.exc 10Cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 14 | S&F for 2mm thick fibre glass reinforced translucent plain colour sheeting fixed with coach screw and washer in roof, wall and angle iron etc complete all as specified and directed. |
| 15 | S&F barbed razor tape concertina coil hot dip galvanized spring tensile wire to particular here-in-after or other equivalent make as approved by GE of UTS 145 to 150 kg/mm^2 and Dia of coil when unstreched 600 mm having minimum number of circles 10/Rm, minimum number of clipes 25/RM and minimum weight of coil 1.625 Kg/Rm,hot dip galvanized razor ribbon tape of size 0.50mm thickness,19 mm width before wrapping on central core wire fixed with GI 1.66 mm clips and special nut bolts to hold two coils together and extra 2 rows parallel wire of 10 gauge tied by binding wire wherever complete all as specified and directed. |
| 16 | Demolition of brick work or stone masonry built in CM incl all quions complete all as specified and directed. |
| 17 | M&L Pre-cast cement concrete type C1, 1:3:6 (20 mm graded aggregate) block masonry with solid blocks, exc.10 cm in width and setting in CM 1:6 complete all as specified and directed. |
| 18 | All as per item No 17 but expect blocks complete all as specified and directed. |
| 19 | M&L plain cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate as in coping / kerbs stone, surface channel etc including necessary form work including weathering slightly rounded or chamfered angles and throating complete all as specified and directed. |
| 20 | Taking down cement or cement lime plaster of any description on brick, stone or concrete surfaces etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 21 | M&L for cement plaster 15mm thick in 1:4 on over stone / brickwork / concrete wall surfaces, finished even & smooth without using extra cement etc complete all as specified and directed. |
| 22 | M&L for preparation of newly plastered surfaces and applying two coats of cement base paint on walls etc complete all as specified and directed. |
| 23 | M & L for Preparation of old plastered surfaces and applying one coats of cement base paint on walls etc complete all as specified and directed. |
| 24 | Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 25 | M&L pre cast cement concrete 1:3:6, type C-1, in kerb stone water troughs and the like including weathering, slightly rounded or chamfered angles and throating, set in cement mortar 1:6, complete all as specified and directed. |
| 26 | Demolition stone slabs and tiles of any description or thickness in floors, aprons and paving laid dry or laid bedded and pointed in any mortar etc complete all as specified and directed. |
| 27 | M&L for 75mm thick PCC 1:3:6 type C-2 (40mm graded stone aggregate) as in sub base complete all as specified and directed. |
| 28 | M&L for sand filling in bedding layer for laying floor finished complete all as specified and directed. |
| 29 | M&L for coloured and glossy machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade jointed with grey cement and pigments complete all as specified and directed. |
| 30 | M&L for chequered tiles of size 300x300x 25 mm thick, set and jointed in neat cement slurry in floors and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 31 | M&L for 40 mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in floor finishing cement concrete surface even and smooth w/o extra cement complete all as specified and directed. |
| 32 | M&L cleaning the existing surfaces of chequered tiles/paver blocks and applying one coats of floor guard paint (1st quality as approved by GE) complete all as specified and directed. |
| 33 | Excavating in trenches n exc 1.5m wide and n exc 1.5m in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. and getting out Hard/ dense soil complete all as specified and directed. |
| 34 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm complete all as specified and directed. |
| 35 | Demolition and breaking up drain pipe 450mm dia (SGSW, AC or RCC) set in cement mortar and including PCC bedding haunching complete all as specified and directed. |
| 36 | M&L for RCC drain pipes, 450 mm dia conforming to class NP2, laid in trenches and jointed complete all as specified and directed. |
| 37 | M&L Cement concrete bed to drain pipe and packing under haunching against side of pipes after laying in PCC (1:3:6) type C-2 using 40mm graded stone aggregate for 450mm dia pipe complete all as specified and directed. |
| 38 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 39 | M & L for reinforced cement concrete type B-1 1:2:4 (20mm graded stone aggregate) as in slabs supported on walls, beams deck slabs and in shelves etc complete all as specified and directed. |
| 40 | M & L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work n exc 200mm thick complete all as specified and directed. |
| 41 | S&F mild steel TMT bars 10 mm dia and over cut to length, bent to shape reqd incl cranking, bending spherically for hooping for columns, hooking ends & binding steel wires not less than 0.9mm dia with clips complete all as specified and directed. |
| 42 | S&F for precast cement concrete in cover slabs for manhole, drain and connected works type B1 using 20 mm Graded stone aggregate (1:2:4) set in CM 1:4 including necessary form work and reinforcement complete all as specified and directed. |
| 43 | Dismantling of wrought iron or mild steel work of any description and any position etc complete all as specified and directed. |
| 44 | M&L for fabrication of framed work as MS grills / grating with ends of bars shouldered and or riveted or forged into spikes, framed guard bars barred iron doors, ladders framed balusters, walk ways, railings, framework of water tanks and similar work conform to Fe 290 Gde-E-165 & fixed in position complete all as specified and directed. |
| 45 | S&F Mild steel plates, plain or chequered, 5mm thick or over in for drain/manhole cover conforming to Fe 290 E 165 complete all as specified and directed. |
| 46 | M & L Preparation of new steel surface over 10 cm in width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over one coat of red oxide primer complete all as specified and directed. |
| 47 | M&L for Preparation of old painted surfaces of steel or steel based materials of any description not other wise described, over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed. |
| 48 | S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade St-240, complete all as specified and directed. |
| 49 | Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed. |
| 50 | S&F in position Pre painted galvalume sheet aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/claddig to wall, fixed with self tapping screws or or J hook complete all as specified and directed. |
| 51 | S&F in position Pre painted galvalume sheet aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/claddig to wall, fixed with self tapping screws or or J hook complete all as specified and directed. |
| 52 | M&L for providing and fixing stainless steel (Grade 304) railing / ladder / grill / post / frame / sign board etc made of hollow tubes, channels, plates etc including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel fastener, nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. |
| 53 | S&F of \\"Building Name / Number Plate\\", made of 5 mm thick acrylic sheet, including provision of vinyl sheet over one side of acrylic sheet of approved shade and colour, cutting and shaping of acrylic sheet to the required size, drilling of necessary holes and fixing to the supporting frame with suitable nuts, bolts, washers and other accessories, complete all as specified and directed. |
| 54 | M&L of written numerals and letters, of height 80 mm to 200 mm, on vinyl sheet, including cutting, pasting/fixing over vinyl sheet and all necessary labour for completing the lettering work, with colour, design and pattern as approved by GE, complete in all as specified and directed.Note :1. Each letter shall be measured. 2. The cost of vinyl sheet and acrylic sheet shall be deemed to be included in Item No 53) |
| 55 | Removing excavated materials or demolished materials outside from MD land complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysOct 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender