Tender For Special Repair To Bldg No P-41/01 To 08 (Govt Md Accn) At Misa C Under Ge (S) Tezpur
Tender Value
40 Lakhs
Estimated cost
Bid Submission
20 Oct 2026
17 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nagaon → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No P-41/01 To 08 (Govt Md Accn) At Misa C Under Ge (S) Tezpur
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed |
| 2 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed |
| 3 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as directed. |
| 4 | Demolition of brick work built in cement mortor including all quoins, arches, pillars etc and all as specified . |
| 5 | Taking down cement or cement lime plaster any description on any walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed |
| 6 | Taking down chowkhats or frames area exc. 1.50 Sqm but not exc. 4.00 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 7 | Taking down chowkhats or frames area not exc. 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 8 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 9 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed |
| 10 | Taking up or down water pipe tubing and connections, including cleaning for re-fixing or removal to store Outer diameter of pipes : 15 mm |
| 11 | Taking up or down water pipe tubing and connections, including cleaning for re-fixing or removal to store Outer diameter of pipes :20 mm |
| 12 | Dismantling water tanks of capacity exec 250 l and not exec 500 l and removing to store complete all as specified and directed. |
| 13 | Demolition and breaking up drain pipes of internal dia 100/75 mm (Salt glazed ware,AC or Reinforced concrete,CI,PVC) set in cement mortar complete all as specified and directed. |
| 14 | Demolition and breaking up drain pipes 150 mm dia (Salt glazed ware,AC or Reinforced concrete) set in cement mortar complete all as specified and directed. |
| 15 | M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in Cement mortar 1:6 complete all as specified & as directed. |
| 16 | M&L for brickwork with subclass‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed. |
| 17 | M&L for rendering 15 mm thick on faces of brick work or concrete surface in CM (1:6), finished even and smooth without using extra cement complete all as specified and directed. |
| 18 | M&L for 15 mm thick rendering with cement mortar (1:4) on fair faces of brick work in two layers (10mm & 5mm)seperately mixed with water proofing compound in top layer as per manufacturer's instructions and finishing the surface even and smooth without using extra cement complete all as specified and as directed.Note:- WPC shall be measured and paid seperately under appropiate item. |
| 19 | Supply only liquid water proofing compound complete all as specified and directed. |
| 20 | M&L for rendering 5 mm thick on fair faces of brick work or concrete surface in CM (1:3) as in ceiling, finished even and smooth without using extra cement complete all as specified and directed. |
| 21 | M & L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer over and including a coat of 1mm thick white putty complete all as specified and directed. |
| 22 | M & L for complete removal of existing treatment and applying two coats of oil bound distemper over a coat of primer over and including a coat of 1mm thick white putty complete all as specified and directed. |
| 23 | M&L for preparing new plastered surface of walls and applying a three coat of white wash complete all as specified. |
| 24 | M&L for preparing new plastered surface of ceiling and applying a three coat of white wash complete all as specified. |
| 25 | M&L for preparing old plastered surface of ceiling and applying one coat of white wash complete all as specified and directed. |
| 26 | M&L for finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) over a coat of 1 mm thick wall care putty suitable for exterior emulsion paint Allow 6-8 hrs to dry the surface in both the coats of paint complete all as directed. |
| 27 | M&L for finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) over a coat of 1 mm thick wall care putty suitable for exterior emulsion paint Allow 6-8 hrs to dry the surface in both the coats of paint including complete removal of existing treatment on wall/ roof projections including facia,cornices etc by scrapping to make surface clean,free from dust,loose paint etc by skilled labour complete all as specified and directed. |
| 28 | S & F 125mmx60mm size and 1.60 mm thick pressed steel frames for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate etc including applying a coat of tar in inner surface ,red oxide to outer surface and filling the frame using PCC M-10 using 12.50 mm graded stone aggregate complete all as specified and directed. |
| 29 | S & F 105mmx60mm size and 1.60 mm thick pressed steel frames for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate etc including applying a coat of tar in inner surface ,red oxide to outer surface and filling the frame using PCC M-10 using 12.50 mm graded stone aggregate complete all as specified and directed. |
| 30 | M&L for PCC (1:3:6) type C1 20mm graded aggregate as in padding ,holdfast/filling of chowkhats or similar work complete all as specified and directed. |
| 31 | S&F of factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 32 | S&F of 35 mm thick PVC mosquto proof door shutter consisting of frame made out of M. S. tube of gauge thickness and size of 20 mm x 20 mm lipped with 5 mm Plain pvc sheet with stainless steel net with prelaminated sheet in desired colour complete all as specified and directed by engr in charge.(Note - minimum density 600 Kg /Cum ) |
| 33 | S & F factory made steel windows including box type hinges with steel handles & steel pag stay complete (without glazing bars), dovetailed or welded including fixing of lugs in PCC 1:2:4, type B-1, using 20mm graded stone aggregate & making good walls & cills to match the existing and including one coat of red oxide/ zinc chrome primer complete all as specified and directed. |
| 34 | S & F factory made steel windows with side hung shutters including box type hinges with steel handles & steel pag stay complete (with glazing bars), dovetailed or welded including fixing of lugs in PCC 1:2:4, type B-1, using 20mm graded stone aggregate & making good walls & cills to match the existing and including one coat of red oxide/ zinc chrome primer complete all as specified and directed. |
| 35 | M & L for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 36 | M & L for anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat ,louvers for fixing of glass in ventilators and powder coated (minimum thickness of powder coating 50 micron)etc. complete all as specified and directed |
| 37 | Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded prelam colour PVC `C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and prelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of both side Prelam PVC sheet to be fitted in the M.S frame welded/sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 38 | Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing |
| 39 | S & F of 100 mm long extruded anodised aluminium alloy handle, fabricated type complete all as specified and directed. |
| 40 | S & F of 150 mm long extruded anodised aluminium alloy handle, fabricated type complete all as specified and directed. |
| 41 | S & F of 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 42 | S & F of 200 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 43 | S & F of 100 mm long mild steel butt hinges, medium weight cold rolled complete all as specified and directed. |
| 44 | S & F of 125 mm long mild steel butt hinges, medium weight cold rolled complete all as specified and directed. |
| 45 | S & F of 300 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 46 | S&F of floor door stopper 140mm (overall length of cover plate) of aluminum alloy body and tongue, anodized, with hard drawn steel spring fixed in floor including taking down the old one complete all as directed. |
| 47 | S&F in repair mild steel 300mm,ordinary rat tail rod pattern spring including roller and roller plate complete all as directed. |
| 48 | S&F of stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed |
| 49 | S & F in repairs stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed |
| 50 | Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed by Engineer-in-Charge. |
| 51 | M & L for 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc. 0.5 Sqm in each pane complete all specified and as directed. |
| 52 | M & L for 3 mm thick frosted glass ordinary quality and glazing with oil putty in squares not exc. 0.5 Sqm in each pane complete all specified and as directed. |
| 53 | M&L for preparation of new wooden surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of primer complete all as directed. |
| 54 | M&L for preparation of steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paints over one coat of red oxide primer complete all as specified and directed |
| 55 | S & F in repairs powder coated mild steel drapery rod of 20 mm inner dia of approved colour with and including decorative finial at both ends and pair of powder coated mild steel brackets fixed at both ends fixed with PVC rawl plug and steel screws on walls/beam, complete all as directed. |
| 56 | M & L for providing 25mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in flooring, and the like finished fair and even without using extra cement complete all as specified and directed. |
| 57 | M & L for screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:6, for laying floor finishes complete all as specified and directed. |
| 58 | M & L for rendering 10 mm thick in cement mortar 1:4 on fair faces of brick or concrete surfaces finished even and rough for receiving wall tiles/dado/skirting complete all as specified and directed. |
| 59 | M&L 16-18 mm thick pre-polished Kota stone slab area of each tile exc. 0.18 Sqm but not exc. 0.36 sqm,as in flooring ,treads of stair over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete all as specified and directed. |
| 60 | M&L 16-18 mm thick pre-polished Kota stone slab area of each tile exc. 0.18 Sqm but not exc. 0.36 sqm,as in skirting , riser of stair over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete all as specified and directed. |
| 61 | M & L for double charged vitrified ceramic light shade coloured tiles 10 mm thick (Square or Rectangular) polished, area of each tile not exc. 0.36 Sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile complete all as specified and directed. |
| 62 | M & L for double charged vitrified ceramic light shade coloured tiles 10 mm thick (Square or Rectangular) polished, area of each tile not exc. 0.36 Sqm, as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile complete all as specified and directed. |
| 63 | M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.18 Sqm but not exc. 0.36 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile complete all as specified and directed. |
| 64 | M&L for coloured glazed ceramic tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match to match the surface of tile complete all as specified and directed. |
| 65 | M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed |
| 66 | M&L for RCC (nominal mix) (1:2:4) type B1 using 20mm graged stone agreegate Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 67 | M & L for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed. |
| 68 | M&L 18-20 mm Granite (of any type) thick machine cut, as in steps, jambs, pillars, window-cills, cooking platforms and like, for bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete including 20mm thick screed bed or bedding layer cement mortar (1:6) and making hole for gas pipeline complete all as specified and directed. |
| 69 | M&L Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed. |
| 70 | M&L 18-20 mm Granite (of any type) thick machine cut, as in steps, jambs, pillars, window-cills, cooking platforms and like counter skirting/vertical surface, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete including 15mm thick screed bed or bedding layer cement mortar (1:4) complete all as specified and directed. |
| 71 | S & F in repairs kitchen sink without drainage board made of satinless steel 1 mm thick with plug washer and waste coupling including bedding in cement mortar to dwarf wall or including and fixing cantilever brackets and connecting union pipe overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm including flush pipe of polyethylene of low or high density or PVC 32mm bore with long screwed shanks and fly nuts complete all as directed. |
| 72 | S&F in repair stainless steel kitchen plate rack of size 900mm x 1000mm x 200mm fabricated out of Ist quality 0.6mm thick stainless steel sheet and as approved by GE complete all as directed. |
| 73 | S&F in repairs 15 mm bore CP sink cock with regular swinging spout (wall mounted) with wall flange screwed down for iron pipe and fixed complete all as directed.( Minimum weight 15mm-1200 gms) Product Code & Make : Cat Part No QQP-7347PM of Jaquar or equivalent ) |
| 74 | S&F laminated PVC kitchen cabinets of depth 300mm with decorative finish on one face and other face white,made out of 18mm thick outer box and 18mm thick shelves of density not less than 550 kg/cum and shutters complete including knobs, hinges. Fixed to walls with steel screw and PVC sleeves by drilling holes. (Note : Only front face is to be measured) |
| 75 | S&F laminated PVC kitchen cabinets of depth 610mm with decorative finish on one face and other face white,made out of 18mm thick outer box and 18mm thick shelves of density not less than 500 kg/cum and shutters complete including knobs, hinges. Fixed to walls with steel screw and PVC sleeves by drilling holes.(Note : Only front face is to be measured) |
| 76 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 10 cm but not exc 20 cm girth |
| 77 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including cutting through walls together with all tube fittings (such as bends, elbows, tees, short pieces, connectors, backnuts,diminishing pieces, caps, plugs and unions, etc.) and fixing complete with clips, wall hooks, wooden plugs, complete all as specified. |
| 78 | (a) Outer diameter of pipes :20mm |
| 79 | (b) Outer diameter of pipes :32 mm |
| 80 | S&F of male Brass Threaded Adaptor (MTA/ MBTA) for cPVC pipe of outer diameter : 20 mm complete all as specified and directed. |
| 81 | S&F of female Brass Threaded Adaptor (FTA/ FBTA) for cPVC pipe of outer diameter : 20 mm complete all as specified and directed. |
| 82 | S&F of Tank Adaptor for cPVC pipe of outer diameter : 32 mm complete all as specified and directed. |
| 83 | S&F of 500 litre capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed. |
| 84 | S&F in repairs gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of size 20mm dia complete all as specified and directed. |
| 85 | S&F of 20mm dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed |
| 86 | M&L for 25 mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) with integral water proofing compound as in sunken floor (MAKE : Dr fixit, pedilite, fosroc or equivalent)( Note: WPC shall be paid seprately) |
| 87 | M&L for 20mm thick rendering in cement mortar (1:4) mixed with water proofing compound @ 3% and applying water proofing treatment on sunken portion with acrylic based polymer modifed cementitious composit compound as specified and approved & cement slurry two layers, 1st layer @ 0.488 Kg/ Sqm mixed with composit compound @ 0.253 Kg/Sqm, & the second layer slurry @0.242 Kg/Sqm mixed 0.126 Kg of compound complete with minimum 4 hours allowed to air cure between these layers and applying 200 µ polyflim with adhesive.complete all as specified and directed by Engineer-in-Charge. |
| 88 | M & L for cement concrete type E2, 1:5:10 (40mm graded aggregate) as in mass concrete in sunken floors complete all as specified and directed. |
| 89 | S&F 40mm dia GI pipe, medium grade as in spout pipe in sunken floor complete all as specified and directed. |
| 90 | S&F of 15 mm bore high density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc.complete all as specified and directed. |
| 91 | S &F in repair vitreous china squatting pan, orissa pattern size 580 X440 mm white/colour with integral foot rest (excluding flushing cistern and flush pipe) including provison of lime concrete complete all as specified and directed. |
| 92 | S & F in repairs PVC valveless, syphonic action type, wall hung 10 litres flushing cistern, low level, white with inlet ball valve foat and handle including brackets complete all as specified and directed. |
| 93 | S & F in repairs 15mm bore brass chromium plated fancy type bib cock with wall flange screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 94 | S & F in repair vitreous China wash basin, white flat back, size 550x400mm excluding taps, waste chain and plug and porcelan stopper but including brackets complete all as specified. |
| 95 | S&F in repairs 15 mm bore Pillar taps, cast copper alloy, with capstan heads,chromium plated fancy type,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed |
| 96 | S&F in repair towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed. |
| 97 | S & F in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all specified and as directed. |
| 98 | S&F in repair PVC connection pipe 15mm dia with PTMT nuts of length 600mm complete all as specified and directed. |
| 99 | S&F of 15 mm dia Brass CP, wall mixer 2 in 1 system with provision for both hand and overhead shower complete with 115 mm long bend pipe, connecting legs and wall flange (without Hand and overhead shower) (Concealed type) screwed both ends for iron pipe or for unions complete all as specified and as directed. |
| 100 | S & F of Overhead Shower 150mm x 150mm square shape single flow ABS body Chrome plated with gray face plate with rubit cleaning system including provision of 450mm long chromium plated best quality shower arm complete all as specified and as directed. |
| 101 | S & F in repairs soap dish chromium plated brass alloy, any type, fix to plugs with chromium plated brass screws approximate size 160x 160x90mm complete all as specified. |
| 102 | S&F in repair towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms) complete all as specified and directed. |
| 103 | S&F in repair 15 mm dia Fancy type Chromium plated Angle valves, cast copper alloy screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 104 | S&F of 110 mm dia PVC (SWR) pipes single socketd, in any length with rubber ring joints fixed to wall with stack clamp complete all as specified and directed. |
| 105 | S&F of 110 mm dia PVC (SWR) bends any radius complete all as specified and directed. |
| 106 | S&F of 110 mm dia PVC (SWR) junction single,(Single T) equal or unequal complete all as specified and directed. |
| 107 | S&F of 110 mm dia PVC (SWR) vent cowl complete all as specified and directed |
| 108 | S&F of 110 mm dia PVC (SWR) branch piece,single (single Y) equal or unequal complete all as specified and directed |
| 109 | S&F of 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 110 | S&F in repair PVC (SWR) floor trap 125/110 mm, setting and jointing with solvent cement complete all specified and as directed. |
| 111 | S & F in repair 125mm dia PTMT grating doom with waste hole for waste pipe ( minimum weight 40 gram) complete all as specified. |
| 112 | M&L for concrete bed of PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) for 150mm pipe including packing under and hunching against the side of pipe complete after pipes are laid , jointed and tested complete all as specified and directed. |
| 113 | Supplying & laying, jointing and testing salt glazed stone ware drain pipe, grade 'A' 150mm bore (internal dia) laid in trenches on concrete bed to required slope jointed and tested complete all as specified and directed by the Engineer-in-Charge.(Note:- Excavation/earth work and concrete bed shall be measured and paid for separately) |
| 114 | M&L for taking down of existing Roof treatment from roof and fence and covering surface of old concrete roof by picking , sweeping clena and washing down with water remove dust, etc and applying roof treatement with the following specifications: (a) Rendering 15mm th in cm (1:4) fixed with water proofing compound as per manufacturers instruction on cleaned concrete surfaces of roof and finishing the surfaces fair and even including curing the plaster surfaces for 7 days by ponding water over the roof (leveling coure) (b) Applying evenly one coat of cold bituminous primer conforming to IS- 3384-1088@ 0.30 litre per sqm on th cleaned plastered surfaces(c) Applying layer of APP based polymeric membrane 3mm th (minimum) weighing 3.50 kg per sqm (reinforced with polyster non woven fabric weighing not less than 160 gms per sqm by torch application . The overlap shall not less than 100mm onn the reverse direction and 75mm longitudinal direction and sealing overlaps. (e) Applying evenly one coat of aluminium paint of 0.10 ltr sqm over APP based polymeric membrane. |
| 115 | S & F of 0.50 mm thick pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 116 | S & F of 0.50 mm thick pre-painted galvalume aluminum zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 117 | S & F of hangers 6mm dia GI (upto 1200 mm length ) adjusting level fixed to roof slabs or steel framed structure or truss by means of ceiling cleats made out of GI flat 40x3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40mm long complete all as specified and directed |
| 118 | S & F of GI powder coated snap grid frame work for false ceiling all as specified size of grid 605x605mm with GI angle 25x25x1.5mm, main 'T' of 38x25x1.5mm and secondary 'T' 25x25x1.2mm complete all as directed. |
| 119 | M & L for 4mm thick non asbestos fibre cement building boards, fixed or laid/inserted to timber /GI/Aluminium framework with screws fixed in ceiling flat or sloping complete all as specified & directed. |
| 120 | S&F mild steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240 including notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts including rivets or nuts and bolts, providing and fixing cleats, fish plates, gusset plates etc and also for wedging, plumbing, turning up & fixing complete all as specified and directed by Engineer-in-Charge. |
| 121 | M&L for preparation of steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paints over one coat of red oxide primer complete all as specified and directed |
| 122 | M&L 75 mm thick Cement concrete type C1 1:3:6 (using 20 mm graded stone aggregate) as in plinth protection laid in alternate bays (not exceeding 2 Sqm each) and finished cement concrete surface even and smooth without using extra cement and providing joints throughout thickness of plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and two parts of sand by weight complete all as specified and as directed. |
| 123 | M&L for cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate as in surface channel of drain and as in benching to drains, exposed surface of concrete finished even and smooth using extra cement complete all as specified and directed. |
| 124 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds mitred/stopped ends etc complete all as directed. Note :- Measurment shall be taken only for inner girth. |
| 125 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete,including fixture and fittings such as switches,ceiling roses,pendants,regulators,sockets,light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc. |
| 126 | M&L for Point wiring with PVC insulated and unsheathed FRLSH cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts grade cable conforming to IS - 694 1990 drawn through and including PVC concealed conduit 20mm dia medium duty with all accessories including modular GI boxes of suitable sizes including 1.5 sq mm FRLSH stranded PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for one light or fan point controlled by one switch single pole one way for light/ ceiling fan/ exhaust fan/call bell point/ Switch socket outlet 5 amps complete all as specified and as directed.Note: (i) Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board. (Rate deemed to be inclusive of cutting chases and making good disturbed surface). |
| 127 | All as per item No. 124 here-in-before but one 3 pin 5 amps switch socket commbination on the independent board with other switch complete all as specified and directed by Engineer-in-charge. |
| 128 | All as per item No. 124 here-in-before but one 3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed by Engineer-in-charge. |
| 129 | M & L for point wiring for socket out let on 16 Amps independent Boards controlled by one, one way switch using 2.5 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLS cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, including metal flush box suitable for modular cover plate with frame of suitable size of 3M and 2.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLS PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed.Note: (i) Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board. (Rate deemed to be inclusive of cutting chases and making good disturbed surface). |
| 130 | M & L for point wiring for socket out let on 16 Amps independent Boards controlled by one, one way switch using 4.0 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, including metal flush box suitable for modular cover plate with frame of suitable size of 3M and 4.0 sqmm nominal cross sectioanl area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed.(Rate deemed to be inclusive of cutting chases and making good disturbed surface). |
| 131 | S&F Modular type switch 6 Amps 230V AC single module one way complete all as specified and as directed. |
| 132 | S&F Modular socket out let 3 pin 10 Amps shuttered type 230V AC 2 module complete all as specified and as directed. |
| 133 | S&F Modular socket out let 3 pin 16 Amps shuttered type 230V AC 2 module complete all as specified and as directed. |
| 134 | S&F Modular type switch 16 Amps 230V AC single module one way complete all as specified and as directed. |
| 135 | S&F Ceiling rose, surface bakelite, 65 x 50 mm,three terminals complete all as specified and directed. |
| 136 | S&F Modular type fan regulator Step type,100 Watt, one module/ two module, 230V AC complete all as specified and as directed. |
| 137 | S&F Modular bell push, 10 Amps 230V AC single module complete all as specified and as directed. |
| 138 | Supply and fix Ding Dong bell, AC, 230 volts, single pole complete all as specified and as directed.. |
| 139 | Supply & fixing lamp holder, PVC/polycarbonate type with back plate straight or angular suitable for batten fittings complete all as specified. |
| 140 | Supply and fixing modular white cover plate with frame 2 modules complete all as specified and as directed. |
| 141 | Supply and fixing modular white cover plate with frame 3 modules complete all as specified and as directed. |
| 142 | Supply and fixing modular white cover plate with frame 4 modules complete all as specified and as directed. |
| 143 | Supply and fixing modular white cover plate with frame 6 modules complete all as specified and as directed. |
| 144 | Supply and fixing modular white cover plate with frame 8 modules complete all as specified and as directed. |
| 145 | Supplying and fixing in repair two single core ,6 sqmm nominal cross sectional area multistranded copper conductor FR cable, PVC insulated unsheathed 1100 Volts grade drawing in and including nd including suitable size PVC conduit (ISI marked) concealed including 6 sqmm nominal cross sectional area multistranded copper conductor FR cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified. Note : Two run of 6 sqmm wire with one run of 6 sqmm and one run of casing capaing / conduit pipe shall be measured against one unit. |
| 146 | Supply and fixed in repair 18 W LED light fitting wall mounted batten 4'ft , minimumm lumen output 100 lumen/Wat, extruded polycarbonate, enivromental friendly, heat sink provided for efficent heat dissipation and integrated electronic driver for 18 watt,6500K including necessary connection complete all as specified and directed. |
| 147 | Supply and fixed in repair 10 W LED light fitting wall mounted batten 2'ft , minimumm lumen output 100 lumen/Wat, extruded polycarbonate, enivromental friendly, heat sink provided for efficent heat dissipation and integrated electronic driver for 09 watt,6500K including necessary connection complete all as specified and directed. |
| 148 | Supply and fixed in repair security light fittings 30 watts, minimumm lumen output 100 lumen/Watt, made up of pressure dia cast housing with prismatic polycarbornate diffuser and individual LED with secondary optic and IP65 including necessary connection complete including 25mm dia light grade GI bracket with nut bolt and clamp complete with all accessories including connected with twin core twisted flexible copper conductor of suitable size complete all as directed. |
| 149 | Supply and fixed in repair 12 W Surface panel mounted round LED downlight, aesthetically designed aluminium die-cast enclousers, with seperate replaceable constant current driver 12 watts, including necessary connection complete all as specified and directed. |
| 150 | Supply & fix in replacement of LED bulb 15 watt 6500 k complete all as specified and as directed. |
| 151 | Supply and fixing in repair LED decorative wall light made up of high grade engineering plastic material suitable for LED 20W complete as per manufacturer's instructions all as specified and directed. |
| 152 | Supply and fixed in repairs epoxy powder coated sheet metal enclosure for DBs, double door, Triple pole and neutral 415 V, 4 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as directed. |
| 153 | Supply and fixed in repairs epoxy powder coated sheet metal enclosure for DBs, double door (when MCBs to be used), Single pole and neutral 240 V, 8 ways with mounting fitted with bus bar, DIN channel ,neutral link and incoming contact complete all as directed. |
| 154 | Supply and fixed in repairs MCB SP, 6 to 32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs including necessry connection complete all as specified and directed. |
| 155 | Supply and fixed in repairs MCB SPN 6-32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed. |
| 156 | Supply and fixed in repairs MCB TPN 63 Amps, 'C' series 10kA, 415 Volts and to be housed in DBs complete including necessry connection all as specified and directed. |
| 157 | Taking down of AC ceiling / exhaust fan of any sweep & any height and opening the fan and oiling, greasing and replacement of unserviceable accessories and servicing, complete overhauling and re-assembling and testing complete for efficient functioning and hanging it back in position including provn of 0.5 Sqmm copper flexible twin twisted cable (length not exceeding 0.5 metre) from ceiling rose to fan as directed by the Engr-in-Charge. |
| 158 | Taking down existing Geyser of any size and make upto 25 ltrs carefully, by diconnecting electrical and water pipe line connection and deposite at MES Yard/store for refixing. |
| 159 | Refixing of existing Geyser 25 ltrs as per above item by connecting electrical and water pipe line connection. |
| 160 | NOTES:1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysOct 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender