Tender For Renovation/Maintenance Of Qtr. No. Ct/04 At Armapur Estate, Kanpur.
Tender Value
24.43 Lakhs
Estimated cost
Bid Submission
12 Oct 2026
5 days left
EMD
49000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kanpur Nagar → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation/Maintenance Of Qtr. No. Ct/04 At Armapur Estate, Kanpur.
BOQ
| Sl. No. | Item Description |
| 1 | M&L for Cutting holes in brick walls exc. Half brick but n.exc one brick built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required |
| 2 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 2.10 m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) omprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. |
| 3 | Supply and fixing factory made uPVC white colour Two track two panels sliding window upto 1.50 m height made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension . (Area of window above 1.75 sqm upto 2.50 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steelscrews etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware’s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. |
| 4 | Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). |
| 5 | S & F of 4 mm Sheet glass, ordinary quality and glazing with oil putty/glazing beads in square exc 0.5 sq. m in each pane |
| 6 | S & F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples |
| 7 | M&L for spraying cement slurry 3.0 kg per sqm and rendering 12mm thick cement plaster 1:4 on fair faces of brick work or concrete on wall surfaces making even & smooth without using extra cement. |
| 8 | Supply, Fabrication and fixing of Wardrobe complete with 18mm HDHMR Plywood,Laminated finish, ,shutter shelves, partitions, drawers, SS hinges, handles,locks and all necessary hard ware as per attached drawings. |
| 9 | Cement reinforced Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) |
| 10 | M &L for Glazed ceramic colour tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match |
| 11 | S&F Complete Modular Kitchen of approved design and make (Approval must be obtained from EIC/WIC), comprising base and wall cabinets, laminated shutters, shelves,drawers,approved hardware and fittings, granite 18mm thick countertop, stainless steel fittings and kitchen accessories such as cutlery tray, SS wire baskets, etc., including all necessary fixures, fasteners, supports, cutting, polishing, plumbing /electrical provisions and installation, complete in all resepts. Cabinets and Drawers shall be made of 18mm thick approved quality HDHMR /waterproof plywood finished with 0.9mm thick approved laminate. Kitchen accsessories shall be of SS Grade 304. |
| 12 | Taking down Chowkhats or frames not exc. 1.5 sqm each but with shutters (without taking off shutters from the frames) and removing to store. |
| 13 | M&L for Rough excavation not exceeding 1.5 m deep and getting out soft/loose soil. |
| 14 | M&L for Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm |
| 15 | M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6.0m mean radius built in cement mortar 1:4 at any height with proper scaffolding and safety. |
| 16 | Removing cement mortar from and cleaning bricks, stacking for measurement including all extra handling and removal and disposing off rubbish |
| 17 | Dismantling of Brick work in wall built in cement mortar |
| 18 | M/L for brick Work built in sub class 'B' and built in cement mortar 1:6.(EXCEPT BRICK) |
| 19 | M&L for spraying cement slurry 3.0 kg per sqm and rendering 12mm thick cement plaster 1:4 on fair faces of brick work or concrete on wall surfaces making suface smooth by neeru finished. |
| 20 | M&L for laying of hard core broken stone boulder/agrregate n.exc 63 mm in trenches, over the ground for floring, walking track,etc as per site requirement. |
| 21 | M&L for laying lean Cement concrete type D-2(1:4:8) (40 mm graded agreegate) in foundations, filling and mass concrete. |
| 22 | S&F for Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns etc. |
| 23 | M& L for reinfroced cement concrete (nominal mix) Slabs supported on walls, beams and columns in floors, roofs, landings, type B1 (1;2:4), (20 mm graded agregate). |
| 24 | M&L for frame work for soffit of suspended slabs such as roof slabs, floor slabs etc |
| 25 | M&L Cement Concrete B 0 M-15. 1:2:4 12.5 mm graded aggregate in foundation filling and mass concrete and finished surface even and smooth. |
| 26 | S&F of M.S. angle or other section with gusset plates, rails, bar, braces, etc. for door, gate, hold fast, or other structural work.(Fe -290 Gde E -165) |
| 27 | S&F Framed work such as grills, gratings, etc. With ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; and similar work con-forming to Fe.290.Gde-E-165. |
| 28 | S & F Expanded metal, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members weight n. exe 4 kg |
| 29 | M&l for two coat of synthectic enamel paint over a coat of red oxide primer Surfaces of any description, over 10cm in width or girth,not otherwise described. |
| 30 | S&F of PPGI trepazodial color coated (Polyurethene rigid foam) insulated roof sheets 40mm thick ,consist of insulated layer of rigid,CFC free polyurethene foam 39mm thick sandwitch between two layers(one top and other bottom) of prepainted galvanised iron(PPGI) color coated conforming IS 14246 profile sheets of 0.50mm thick each including S&F of L-type or J-type or crank hook bolts and self drilling screws with EPDM seal as directed by EIC(Make: JSW,TATA ) |
| 31 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 32 | Dismantling old damaged asbestos cement sheet (corrugated, semicorrugated, etc.) sheets in roof coverings |
| 33 | Dismantling of timber scantlings (frame work) 40 sq. cm and over in section, in any position and deposition to store as directed by EIC/WIC. |
| 34 | S&F of tubular Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240. |
| 35 | M&L for 2 mm thickness wall putty over plastered surface to prepare the surface even and smooth (make:JK, Burger, Birla). |
| 36 | M&L for preparation of new plastered surface, supply & apply two coats of plastic emulsion paint on wall surfaces over one coat priming paint plaster coat of any description over 10cm girth or width, not otherwise described. (1st quality) (Make- Asian Paints, Nerolac, Berger) |
| 37 | M&L for preparation of old painted surface & apply two coats of plastic emulsion paint on wall surfaces of any description over 10cm girth or width, not otherwise described. (1st quality) (Make- Asian Paints, Nerolac, Berger) |
| 38 | Taking down carefully by unscrewing from boards/ outlet boxes, fittings and fixtures such as switches,sockets,ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings andregulators, etc. for reuse at site or carrying to the store (To be measured only when found serviceable in all respects complete for reuse). |
| 39 | S & F wiring for circuit/ submain wiring in suitable PVC conduit HMS grade along with earth wire with 2X1.5 sq. mm. + 1 X 1.5sq. mm size of FR PVC insulated copper conductor, single core cable in surface / recessed. Make- For Cable/Wire -Finolex/Havell/Polycab/KEI Conduit pipe- Plaza/Associate/AKG. |
| 40 | S &F Modular switch 1 way 6A, 1 Module . Make:- Legrand/Schneider electric /Havells/Gold medal. |
| 41 | S &F Modular switch 1 way 16A, 1 Module. Make:- Legrand/Schneider electric /Havells/Gold medal. |
| 42 | S&F Socket, 6A - 3 pin combined 2 module Make:- Legrand/Schneider electric /Havells/Gold medal. |
| 43 | S&F Modular Socket 6A/16A - 03 pin combined 2 module, Make:- |
| 44 | S & F Modular White cover plate with frame,8 module. Make:Legrand/Schneider electric /Havells/Gold medal. |
| 45 | S&F of modular fan step regulator,120 watt, 2-module. Make-Legrand/Schneider electric /Havells/Gold medal. |
| 46 | S&F of single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20AMP.Make- Anchor,Havells,Legrand. |
| 47 | Supply and fixing LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.Make:- philips/syska/bajaj/havells. |
| 48 | S&F of modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 49 | S & F Modular White cover plate with frame,18 module. Make:-Legrand/Schneider electric /Havells/Gold medal. |
| 50 | S & F Modular White cover plate with frame,16 module. Make:-Legrand/Schneider electric /Havells/Gold medal. |
| 51 | S & F of GI pipe bracket of 32 mm. Bore dia of 1 meter length with required bend angle at center 02 no. of hole of 10mm. dia. as directed with 01 set of bracing clamp 20 x 5and as directed mm. size made up of MS strip with hole at both end of 10 mm. dia nut two nos. and fix to pole/wall with the help of suitable clamp and nut bolts. |
| 52 | S&F of standard 24 volts inverter,converts 24 volts DC battery power into 230/240volts AC household electricity ,typically supporting contineous power load between 2000VA to 3000VA using two 12V batteries(lithium), pure sine wave with battery support range of 200Ah or above for 3-4 hrs. backup with overload ,short circuit ,low battery,and over temperature protection with a double-battery inverter trolley typically compact stacked design made from heavy duty high-grade plastic to support two heavy tubular or flat batteries and inverter unit, bearing load capacity of trolley should above 150 Kg. Make-luminous power technologies, Micro-tech, Livguard. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysOct 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender