Tender For Special Repairs To Roads, Road Side Berm, Kerb Stones, Footpath, Hardstanding In Residential Area Of Rms Bangalore And Special Repairs To Road At Officers Mess Of Selection Centre South, Bangalore Under Ge(South) Bangalore.
Tender Value
44.80 Lakhs
Estimated cost
Bid Submission
21 Oct 2026
17 days left
EMD
89600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Roads, Road Side Berm, Kerb Stones, Footpath, Hardstanding In Residential Area Of Rms Bangalore And Special Repairs To Road At Officers Mess Of Selection Centre South, Bangalore Under Ge(South) Bangalore.
BOQ
| Sl. No. | Item Description |
| 1 | Material and Labour for Scarifying or picking gravelled, macadam or bituminous macadam n. exc. 50mm depth and surfaces in area exc 400sqm complete all as specified and as directed. |
| 2 | M&L for Screening road metal, Chippings, etc. on the site of the work, when specially ordered, including removing screened materials clear of screen and stacking in separate heaps formeasuring complete all as specified and as directed. (Note :-Materials from both sides of screen to be measured) |
| 3 | M&L for Preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. complete all as specified and as directed. |
| 4 | M & L hardcore of gauge n.exc. 63mm of broken stone deposited, spread, levelled, in layers n.exc. 15cm thick watered and rammed to a true surface complete all as specified and as directed. |
| 5 | Labour only for filling hardcore of gauge n.exc. 63mm of broken stone deposited, spread, levelled, in layers n.exc. 15cm thick watered and rammed to a true surface complete all as specified and as directed. |
| 6 | M&L for repairs to pot holes of any depth not exc 1.00 sqm each in area including sweeping free from dust and mud or water, scoring the sunken surfaces in roads etc cutting around edges to at least 25mm in depth , making good by applying tack coat @ 5kg per 10 Sqm (using paving bitumen of VG-10 grade), putting in premixed bituminous macadam, well rammed (including supply of premixed macadam, binder and chippings) depth of potholes exc 30mm complete all as specified and as directed. |
| 7 | M & L for Applying evenly a priming/ tack coat with bituminous primer using paving bitumen of VG-10 grade @ 5 Kg. Per 10 Sq. Metres.complete all as specified and as directed. |
| 8 | M & L for labour for premix bituminous macadam(Design Mix) with minimum 40-60 TPH bach type HMP using crushed stone aggregates of specified grading, premixed with VG-30 bituminous binder @ 4% by weight of total mix and cement as a filler, transporting the hot mix to work site, laying with a hydrostatic paver finished to the required grade, level and alighnment, rolling with smooth wheeled, vibratory and tindem roller to achieve the dezire compaction as per MORTH specification clause no 505 complete in all respects, (consolidated thickness 75 mm or less) etc, complete all as specified and as directed. |
| 9 | M&L Bituminous premix semi dense asphaltic concrete, 30 mm consolidated thickness with 5.5% binder content by weight of total mix by using Paving bitumen (VG-30 grade) as in semi dense asphaltik concrete mixed in hot mix plant, rolled with 8 to 10tonne power roller and compacted to required camber and gradient all as specified and as directed. |
| 10 | M& L for preparing bituminous surface of road and marking 2.5mm thick centre line,stop lines,dashes,arrows etc. and the like not exceeding 10 cm wide on roads pavements with hot applied thermoplastic road marking paint of approved colour confirming to BS-3262-1989 with reflectorizing glass beads on bituminous surface with special applicator machine fitted with pufill shoe glass beads dispenser pupane tank heater and profile shoe heater with heating arrangement upto 160 degree C driven by experienced operator all as per manufacturer instruction complete all as specified and as directed.Note:- 1. Unit rate quoted by the contractor include for provision of red signals to keep off trafic from work. cleaning road surface and working during odd hours when trafic is light. 2. The line marking shall stand out boldly and solidly without showing any signs of scrach marks or suefaces underneath, if necessary the surface shall be remarked after removal of existing treatment untill the desired result is obtained. |
| 11 | S&F in repair cat eye solar reflective type of metal body alloy of size 100 mm x 100 mm x 20 mm with PAMA striplens reflector of model no DA 972 fixed with and including MS stud of suitable size all as per manufacturers instructions and as directed. |
| 12 | S&F in repair Solar Cat eye aluminium alloy shall(100% water proofing design according to 65) of size 125 mm x125 mm x25 mm(Shank 65 mm) of high efficiency Mono rystafie solar panel 2.4 v/0.3 watt one NI-ed rechargeable battery(1.2v/1600MA) consisting of super bright LED with 10000 to 18000 mcd completed as per manufacturers instructions etc. complete all as specified and as directed. |
| 13 | Demolition of cement concrete in ground floors and paving not exc 15 cm thick (below or above ground level) complete all as specified and as directed. |
| 14 | Dismantling floor, hearth tile flooring or wall tiling including cement mortar bedding (but not backing), including removing rubbish off the same outside the MD land complete all as specified and as directed. |
| 15 | M&L for 100 mm thick PCC (1:4:8) type D2 using 40 mm graded crushed stone aggregate in sub base, floor.complete all as specified and as directed. |
| 16 | M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as approved by GE and as in footparth, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern and laying of inter locking paver blocks into the sand bedding layer filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand etc complete all as specified and as directed. |
| 17 | M&L for Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as approved by GE and as in footparth, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern and laying of inter locking paver blocks into the sand bedding layer filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand etc complete all as specified and as directed. |
| 18 | M&L for pre-cast cement concrete block masonry made of PCC (1:3:6) type C-1 using 20 mm graded crushed stone aggregate with solid blocks,exc.10 cm in width and setting in cement mortar (1:6), including demolition of old brick/ stone masonry complete all as specified and as directed. |
| 19 | M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surface finsihed even and smooth (without using extra cement) etc complete all as specified and as directed. |
| 20 | M&L for 20 mm thick screed bed or bedding layer in CM (1:6) for laying floor finishing complete all as specified and as directed. |
| 21 | M&L for coloured vitrified heavy duty ceramic scratch and stain resistant external tiles of size 40cmx 40cm x12 mm thick laid over and including 15mm thick CM(1:4) set jointed and pointed in neat cement slurry in floors complete all as specified and as directed. |
| 22 | M&L for 20 to 25mm thick coloured, rubber moulded glossy finished factory made PCC designer tiles/paver, set and jointed & pointed in neat cement slurry as in path/floor over a screed of 20mm thick in CM (1:4) etc complete all as specified and as directed. |
| 23 | M& L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar (1:3)(1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specfied and as directed. |
| 24 | Material & Labour for preparation of new plastered surfaces and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specfied and as directed. |
| 25 | Removing building materials to distance of exc.1.0 Km but not exc. 5.0 Km out side MD Land complete all as specified and directed.Note:- ( 1 Metric tonne = 1 Load and one cum = 1735kg) |
| 26 | Rolling of formation surface with power roller 8 tonne to 12 tonne complete all as specified and as directed. |
| 27 | M & for Laying and compacting 150 mm thick (compacted thickness) Wet Mix Macadam (WMM) laid in two layers of 75mm each, grading as per table 400-13 of MoRTH specifications for road and bridge works 2013 manufactured in WMM plant, material comprising of clean, crushed, graded aggregate and granular material premixed with water to a dense mass, spreading with sensor paver and rolling with vibratory roller of capacity 80 - 100KN static weight and consolidating to required gradient and camber complete all as specified and as directed. The finished surface tolerances to be as per table 900-1 of MoRTH specifications for road and bridge works 2013 complete all as specified and as directed. |
| 28 | M&L for Preparing of unsurfaced wet mix macadum by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. complete all as specified and as directed. |
| 29 | M&L Bituminous premix semi dense asphaltic concrete, 40 mm consolidated thickness with 5.5% binder content by weight of total mix by using Paving bitumen (VG-30 grade) as in semi dense asphaltic concrete mixed in hot mix plant, rolled with 8 to 10tonne power roller and compacted to required camber and gradient complete all as specified and as directed. |
| 30 | M& L for preparing bituminous surface of road and marking 2.5mm thick centre line,stop lines,dashes,arrows etc. and the like exceeding 10 cm wide on roads pavements with hot applied thermoplastic road marking paint of approved colour confirming to BS-3262-1989 with special applicator machine fitted with pufill shoe glass beads dispenser pupane tank heater and profile shoe heater with heating arrangement upto 160 degree C driven by experienced operator all as per manufacturer instruction complete all as specified and as directed.Note:- 1. Unit rate quoted by the contractor include for provision of red signals to keep off trafic from green work. cleaning road surface and working during odd hours when trafic is light. 2. The line marking shall stand out boldly and solidly without showing any signs of scrach marks or suefaces underneath, if necessary the surface shall be remarked after removal of existing treatment untill the desired result is obtained. |
| 31 | Manufacturing, supplying and fixing in repair polycorbonate 800mm dia road side safety convex mirror out door type,130-160 degree view, 50m supported by 50mm dia 2mm thick M S pipe and unbreakable frame all as per relevant IS code and as approved including necessary excavation, PCC (1:3:6) type C-1 using 20mm graded crushed stone aggregates in foundation, curing etc complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysOct 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender