Tender For Repair And Cleaning Of Sewage Line, Manholes, Drainage At Bikram Enclave, Ifa (Nc) And Sapper Enclave & Aor Of Age B/R-Ii Ge (South) Udh Ur
Tender Value
30 Lakhs
Estimated cost
Bid Submission
20 Oct 2026
17 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Reasi → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Cleaning Of Sewage Line, Manholes, Drainage At Bikram Enclave, Ifa (Nc) And Sapper Enclave & Aor Of Age B/R-Ii Ge (South) Udh Ur
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: MILITARY ENGINEERING SERVICES (GE (SOUTH) UDHAMPUR) NAME OF WORK : REPAIR AND CLEANING OF SEWAGE LINE, MANHOLES, DRAINAGE AT BIKRAM ENCLAVE, IFA (NC) AND SAPPER ENCLAVE & AOR OF AGE B/R-II GE (SOUTH) UDHAMPUR Contract No: CA NO : GE/S(U)-88/2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Ser.No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT TOTAL AMOUNT In Words |
| 2 | Excavation in trenches n exc 1.5m wide and n exc 1.5 m deep and getting out in any type of soil |
| 3 | Returning filling in incl spreading levelling watering and well ramming in layers n exc 25cm thickness |
| 4 | Removing excavated soil to a distance n exc 50m and depositing at alevel n exc 1.5m above the starting point |
| 5 | Demolition of cement concrete in ground floor and pavings nexc 15 cm thick below or above ground level |
| 6 | M&l for PCC type D2(1:4:8) using 40mm graded crushed aggregate as mass concrete and filling of foundation |
| 7 | Demolition and breaking up drain pipes 100/150/200mm dia bore pipe (Salt glazed stone ware, AC or reinforced concrete) all as specified and directed. |
| 8 | S&F for DWCPE (SN8) 180 (OD)/163(ID) mm diameter pipes laid on 150mm thick bed to execute and make sewer line functional complete all as specified and as directed. |
| 9 | S&F for DWCPE (SN8) 200 (OD)/175(ID) mm diameter pipes laid on 150mm thick bed to execute and make sewer line functional complete all as specified and as directed. |
| 10 | M&L for 200mm dia Reinforced concrete pipes, class NP3, laid and jointed complete with collars all as specified and as directed. |
| 11 | M&L for 300mm dia Reinforced concrete pipes, class NP3, laid and jointed complete with collars all as specified and as directed. |
| 12 | M&L for Plain cement conc 1:3:6 type C-2 using 40mm graded agg as in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes all as specified and as directed. |
| 13 | M&L for Plain cement conc 1:3:6 type C-2 using 40mm graded agg as in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes complete all as specified and as directed. |
| 14 | M&L for Plain cement conc 1:4:8 type D-2 using 40mm graded agg as in conc bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 200mm bore pipes all as specified and as directed. |
| 15 | M&L for Plain cement conc 1:4:8 type D-2 using 40mm graded agg as in conc bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 300mm bore pipes all as specified. |
| 16 | Taking down cement plaster on brick or stone masonry wall etc incl racking out joints haking for key, scrubbing down with water etc as in external surfaces of man holes, septic tank, filter bed etc incl removing of debrie. |
| 17 | M&L for applying two coat of white wash on new plastered surfaces of walls after preparation of surfaces complete all as specified and as directed. |
| 18 | M&L Rendering 15mm thick on brick or concrete surfaces of walls in CM (1:4) including finishing the surfaces even and smooth without using extra cement as in manholes, septic tank, filter bed out let drain etc all as directed by Engineer-in-Charge. |
| 19 | M&L for flush pointing to squared rubble masonry coursed or uncoursed in CM (1:3) complete all as specified and as directed. |
| 20 | M&L For PCC type B1(1:2:4) using 20 mm graded cushed stone agg as in coping, benching and the like incl form work |
| 21 | Demolition of renieforced cement concret not exeeding 15cm thickness (below or above ground level). |
| 22 | M&L for reinforced cement concrete type B-1 (using 20mm graded crushed stone graded aggregate work as in slabs supported on walls , beams etc |
| 23 | M&L RCC 1:2:4 type B1 using 20mm graded aggregates for precast cement conc slabs as in manhole covers etc set in cement mortar 1:4 |
| 24 | M&L for form work to soffits of suspended slabs and similar work not exceeding 200mm thick |
| 25 | M&L for mild steel steel TMT bars 10mm dia and over cut to length bent to shape reqd ,incl cranking ,bending spirally for hooping columns hooking ends and binding with mild steel wire annealed not less than 0.9 mm dia |
| 26 | Cutting in to existing manholes (RCC/Brick) for forming new drains and making good to pipe and making good to pipe and rendering ,cutting out existing benching in cement conc 1:2:4 type B1(in 1/2 or 3/4 round in section)and reforming benching as reqd for 150mm/200mm bore pipe. |
| 27 | S&F PVC(SWR) junction double,(Single T),equal or unequal. 110 mm dia pipe thickness not less than 5mm complete all as specified |
| 28 | S&F PVC(SWR) junction double,(double T),equal or unequal. 110 mm dia with access door pipe thickness not less than 5mm complete all as specified |
| 29 | S&F PVC (SWR) vent cowl 110 mm dia pipe thickness not less than 5mm complete all as specified and directed. |
| 30 | CI floor trap with grating incl jointing to waste pipe with dia of outlet 75mm in repair complete all as specified and directed. |
| 31 | Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required of internal dia of pipe upto 100 mm complete all as specified. |
| 32 | S&F sand cast cast iron soil, waste and vent pipes in any length with or without ears, with cement joints fixed to wals bore of pipe 100mm dia . |
| 33 | S&F sand cast cast iron soil, waste and vent pipes in any length with or without ears, with cement joints fixed to walls bore of pipe 75mm dia. |
| 34 | S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints fixed to wall pipe thickness not less than 5mm complete all as specified. |
| 35 | S&F PVC (SWR) pipes 75mm bore single socketed , in any length with rubber ring joints fixed to wall pipe thickness not less than 5mm complete all as specified. |
| 36 | S&F CI bends diminishing pieces or tapers bore of pipe 100mm. |
| 37 | S&F CI bends diminishing pieces or tapers bore of pipe 75mm. |
| 38 | S&F CI branch pieces, single (equator unequal) ordinary or inverted (size or socket type) or with parallel branches with oval access door bore of pipe 100mm. |
| 39 | S&F in repair 10 ltr capacity PVC low level flushing cistern symphonic action type white with inlet valve float and handle including brackets, fixed in repairs complete all as specified and directed. |
| 40 | S&F flush pipe of polyethylene of low or high density or PVC, 32mm dia, for low level cistern complete all as specified and directed. |
| 41 | S&F vitreous China squatting pan, 'Orissa' pattern, size 580x 440 mm white, with integral foot rests including a provision of concrete bedding but fixed in repair complete all as specified and directed. |
| 42 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern flush pipe) incl seat cover complete all as specified. |
| 43 | Health faucet ABS body with wall hook and 1 mtr chrome plated PVC hose pipe in repair complete all as specified and directed. Make : CERA Cat Part No F8030103 and equivalent . |
| 44 | S&F cast iron 'P' or 'S' trap for bore of pipe 100mm complete all as specified. |
| 45 | M& L PCC 1:5:10 type E2 using 40 mm graded brick aggregate as in filling under sunken floors etc complete all as specified. |
| 46 | Water proofing treatment to surfaces of walls/concrete slabs damaged due to moisture and efflorescence including sunken areas of bathrooms/toilets, in balconies by applying acrylic polymer modified cementitious high performance coating or treatment all as per manufacturer's instructions, complete all as specified and as directed. Make : SmartCare Damp Block 2K/Dr. Fixit |
| 47 | Desluding/Dewatering of septictank/ soakage wells/drain including intel/outlet chambers removing out all scum, siltresiduals sludge (both) organic/ inorganic nature) after plugging the incomming sewage lines through combined high pressure water jetting cum suction (vaccum) type machine mounted on LCV/HCV facility of high pressure vaccum and removing the same in the tank to a place outside MOD load meant for the purpose by local municipality complete all as specified and directed by Engr-in-Charge. |
| 48 | Removal of blockage and cleaning of sewage lines of 100 mm bore by roding from manholes to manholes or manholes to cleaning eyes, taking out all debris, sludges and solid materials from sewage lines and removing out side MoD land not less than 1000 metres and well flushing with water complete all as specified and directed. |
| 49 | All as per ser item no.47 above but 150 mm bore complete all as specified and directed. |
| 50 | All as per ser item no.47 above but 200 mm bore complete all as specified and directed. |
| 51 | M&L for cleaning of cast iron pipes 100mm/75mm bore pipes by roddimg with jute bags and well flushing after cleaning complete all as spfd and directed |
| 52 | M&L for cleaning of man holes n.exc 1.5m deep and removing sludge/waste material to distance n.exc 500m and burying in pits and refilling the same complete all as spfd and directed by Engg-in charge. |
| 53 | -do- but exceeding 1.5m deep and 3.0m deep |
| 54 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified. |
| 55 | M&L for Glazed Coloured Ceramic tiles in vertical surface 450x300x7mm thick incl laid over 10 mm thick rendering in CM 1:4, set and joint in neat cement slurry and pointed in white or colour cement to match. |
| 56 | M&L for Non skid Ceramic coloured tiles (square/rectengular) 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc incl 10mm thick screed bed in cement mortar 1:4 for laying floor finishes under floo etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface. |
| 57 | M&L machine pressed precast concrete coloured interlocking paver block (glossy finish) any shape and size (sample approved by GE) confirming to IS 15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment. complete all as specified and as directed. |
| 58 | M&L for 75 mm thick plain cement concrete type D-2 (1:4:8) (40 mm graded stone aggregates) as in sub base complete all as specified and directed. |
| 59 | M&L for sand cushion 20 to 30mm thick for fixing of inter locking tiles complete all as specified and directed by Engr-in-Charge. |
| 60 | M & L 25mm bore galvanised steel water tubing medium grade (ISI Marked) with all fittings and fixed complete to walls and or laid under floors etc complete all as specified and as directed. |
| 61 | M & L 20mm bore galvanised steel water tubing medium grade (ISI Marked) with all fittings and fixed complete to walls and or laid under floors etc complete all as specified and as directed. |
| 62 | M&L in repairs Gun metal globe of gate valve with iron wheel head, screwed both ends of size 20mm complete all as specified. |
| 63 | M&L in repairs Gun metal globe of gate valve with iron wheel head, screwed both ends of size 15mm complete all as specified. |
| 64 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. |
| 65 | M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified. |
| 66 | M&L for walling of random rubble masonary, recangular coursed, well bonded, bedded and solidly hearted, built in CM (1:6) |
| 67 | Granite stone 18-20mm thick (table rubbed and polished) in window cills, cooking platforms and the like not less than 1 Sqm (in one piece), laid over 15mm thick layer of cement mortar 1:3 after roughening of existing concrete surface and applying a layer of neat cement slurry @ 3Kg/Sqm including pointing in white cement 1:2 using marble dust with admixture of pigments to match with shade of stone, including demolition of stone slabs and tiles of any description or thickness in floors etc. laid, bedded and pointed in any mortar complete all as specified and as directed. |
| 68 | M&L for Wall cladding coloured tiles 300x450x7mm or 300x600x7mm for external surfaces size and design as approved by Engr in Charge as in vertical surfaces of walls, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm cement rendering in cement mortar 1:4 complete all as specified and as directed. |
| 69 | Supply, laying and testing (in replacement) of cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core.complete all as specified and directed. |
| 70 | Excavation in trenches in soft/loose soil not exceeding 1.5 M wide and not exceeding 1.5 Mtr deep and getting out including filling bottom surface to required level or slope for laying of pipes/ cables complete all as specified and directed. |
| 71 | Returning filling including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in soft soil complete all as specified and directed. |
| 72 | Removing excavated surplus soil not exceeding 50 Mtr and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified and directed. |
| 73 | S&F Double Walled corrugated DWC Pipe of size 40 mm including snap fit coupler Pt-II for protection of LT Cable in underground all as specified. |
| 74 | S &F for 40 mm dia GI pipe 'light grade' ISI marked including fittings such as bends, tees, sockets etc fixed on wall/pole or laid in trenches under road crossing/hard standing including taking down old /unserveciable existing pipe complete all as specified and directed by engr in charge.NOTE : Excavation and earth work shall be measured & paid separately. |
| 75 | S&F multicore cable of 2.5 sqmm X 6 core PVC insulated with copper conductor cable stranded all as specified. |
| 76 | S&F heavy duty 25 mm pvc conduit inclusive of boxes (junction/terminal) tees,bends,elbow,reducers,bell mouth tube ends and fixing accessories such as couplers, lock, nuts, saddle,pipe,hooks etc. all as specified and directed by engr-in-charge. |
| 77 | S&F U clamp LED 36 Watt, RGB light 3 in 1 ,voltage 12 volt DC recessed/surface molded remote controlled Under Water LED Lights with SS 304 Clamp,ABS Body and colour of Red/Green/blue, Multicolour, IP68 rating for the purpose of Fountain lights, comprising of 1 year replacement warranty,Including Gear Box and all Accessories and connections specified and directed by engr in charge. |
| 78 | supply and fixing RGB light controller 30A with remote/ DMX controller. All as specified and directed by engr in charge. |
| 79 | Earthing complete with galvanized steel earth plate electrodes 600 mm x 600 mm x 6.3 mm thick buried directly in ground earth plate not less than 2.25 m deep below normal ground level with top edge of the plate not less than 1.5 m below normal ground level connected to and including galvanized steel earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and steel including PCC pit in PCC 1:2:4 type B-1using 20 mm graded crushed stone aggregate, RCC frame with 40mm thick RCC cover reinforced with 8mm dia deformed bars handle. including excavation and earth work in any type of soil medium grade GI watering pipe 20mm bore with funnel and wire mesh and light grade GI protection pipe 15mm bore main board complete all as shown in electrical plate No 3 connected to main control board all as specified and testing on completion. Note: Excavation earthwork charcoal PCC pit is covered under this item including taking out existing earth plate etc.Note: if earth resistance of earthing is not found (2 to 5 Ω) satisfactory if will be redone by the contractor on his risk and cost.Complete all as specified and directed by engr in charge. |
| 80 | S&F,LT Panel outdoor type made out of GI sheet of thickness not less than 1.6 mm having hinged front & back opening door with four nos aluminium strip bus bar fitted on resin based insulator and flat iron fixing clamp of size 25mmX3mm and complete painted with two coat of synthetic enamel aluminium paint over a coat of red oxide primer.consist of followingAluminium bus bar of suitable ratingincoming 63 amp 4 pole 16K MCCBoutgoing DOL Starter -01MCB SP-02MCB SPN-02MCB TPN-02Earthing Terminals-02complete all as specified and as directed. |
| 81 | supply and fix butterfly valve of material CI for 50 mm bore GI pipe. Complete all as specified and directed by engr in charge. |
| 82 | supply and fix foot valve of brass material for 50 mm bore GI pipe. Complete all as specified and directed by engr in charge. |
| 83 | Supply and fix cascade of material stainless steel dimension 2400X600X300 in mm. As specified and direced by engr in charge. |
| 84 | Supply fixing testing and commissioning of open well submersible pumpset 5 HP, 3PH, 415 volt size.Material cast iron, head range 6-19 mtr, discharge 8-15 lps, class B,S1 duty type, speed 2900 RPM, sunction dia 63 mm and outlet dia 50 mm,surface finish paint coated.complete all as specified and directed by engr in charge.make-kirloskar,crompton,havells |
| 85 | Supply fixing testing and commissioning of openwell submersible pumpset 3 HP, 3PH, 415 volt size.Material cast iron, head range 6-19 mtr, discharge 8-15 lps, class B,S1 duty type, speed 2900 RPM, sunction dia 63 mm and outlet dia 50 mm,surface finish paint coated.complete all as specified and directed by engr in charge.make-kirloskar,crompton,havells |
| 86 | Supply & fixing GI pipes of size 25 mm dia, medium grade, galvanized with all fitting such as bends, tees, nipples, union and sockets, clamps etc laid in trenches, under floor/walls etc complete all as specified and directed by Engr-in-Charge. |
| 87 | Supply & fixing GI pipes of size 50 mm dia, medium grade, galvanized with all fitting such as bends, tees, nipples, union, reducer and sockets, clamps etc laid in trenches, under floor/walls etc complete all as specified and directed by Engr-in-Charge. |
| 88 | Supply & fixing GI pipes of size 63 mm dia, medium grade, galvanized with all fitting such as bends, tees, nipples, union and sockets, clamps etc laid in trenches, under floor/walls etc complete all as specified and directed by Engr-in-Charge. |
| 89 | Supply and fix Dandelion Jet Head of Dia 900 mm Stainless steel/ brass Head with 40 nozzles and support pipe of 1.8 to 3 mtr height and 76 mm Dia (1.2 mtr height above the water level) with all fittings and accessories.complete all as specified and directed by Engr- in-charge. |
| 90 | supply and fixing SMPS 400W Compatible for 10 Nos x 36 watt RGB light 3 in 1, All as specified and directed by engr in charge. Total in Figures 0.0 0.0 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysOct 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender