Tender For Restoration Of The Rotork Make Actuator At The Delivery Valve Of Ht Pump 1 To 6 At Pressur Station No-3, Igwtp.
Tender Value
4.86 Lakhs
Estimated cost
Bid Submission
09 Oct 2026
5 days left
EMD
10000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
24 Paraganas North → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Restoration Of The Rotork Make Actuator At The Delivery Valve Of Ht Pump 1 To 6 At Pressur Station No-3, Igwtp.
BOQ
| Sl. No. | Item Description |
| 1 | REMOVAL OF ACTUTOR FROM THE EXISTING 750MM DIA B/F VALVE AFTER DISCONNECTION OF 415V, 50HZ, 3-PHASE POWER SUPPLY CABLE FROM THE CONTROL CIRCUIT, EARTHING CABLE ETYC WITH PROPER CARE AND PLACING IT IN A SUITABLE PLACE USING DEPARTMENTAL OVER HEADE CRANE ETC COMPLETE AS PER DIRECTION OF EIC. |
| 2 | DISMANTLING THE ACTUATOR PART BY PART SUCH AS SWITCH MECHANISM, ELECTRICAL AND ELECTRONICS SPARES PCB, MICRO CHIPS, MICROPROCESSORS, TORQUE SENSING LEVEL WITH SPRING PACK, WORM GEAR AND WORM SHAFT ASSEMBLY, COLUMN PIPE WITH LSD SHAFT, DE- CLUTCH LEVER, HAND WHEEL ETC WITH UTMOST CARE ETC COMPLETE AS PER DIRECTION OF EIC. |
| 3 | OVERHAULING OF ACTUATOR WITH INBUILT STARTER INCLUDING SUPPLY OF OIL-SEAL, O-RING, LUBRICANTS ETC AFTER PETROL WASH AND STEAM WASH WITH PROPER CARE COMPLETE AS PER DIRECTION OF EIC. |
| 4 | REPLACEMENT OF COLUM PIPE HAVING DIA. 65MM-75MM WITH LIMIT SWITCH DRIVE SHAFT OF ROTORK MAKE ETC COMPLETE AS PER DIRECTION OF EIC. |
| 5 | REASSEMBLING THE ACTUATOR PART BY PART OF ALL SPARES AND COPONENTS (MECHANICAL, ELECTRICAL AND ELECTRONICS) COMPLETE AS PER DIRECTION OF EIC. |
| 6 | RE-INSTALL THE COMPLETE ACTUATOR ON THE VALVE GEAR BOX OF B/F VALVE, RECONNECTION OF POWER LINE AND CONTROL CIRCUIT WITH PROPER CABLE GLANDS AND EARTHING CONNECTION AND COMPLETE SWITCH SETTING BOTH OPEN & CLOSE WITH PROPER SYNCHRONIZATION OF ELECTRICAL OPERATION FROM OPERATING PANEL/CONTROL DISK ETC COMPLETE AND COMMISSIONING AS PER DIRECTION OF EIC. |
| 7 | TO & FRO TRANSPORTATION OF THE ACTUATOR (APPROXIMATE WEIGHT 70 KG) FROM THE PUMPING STATION TO THE CONTRACTOR'S WORK SHOP INCLUDING LOADING AND UNLOADING WITH PROPER CARE AND CAUTION ETC COMPLETE AS PER DIRECTION OF EIC. |
| 8 | REPAIRING OF ELECTRONICS CIRCUIT I.E PCB AND REPLACEMENT OF ELECTRONICS PARTS SUCH AS MICROPROCESSOR ETC COMPLETE AS PER DIRECTION OF EIC. |
| 9 | REWINDING OF ACTUATOR MOTOR OF 415V, 3-PHASE, 50HZ , 3.7KW, 2-POLE, 144RPM, CHANGE OF DEEP GROOVE SEALED BALL BEARING NO-624(SKF MAKE) AT DRIVE AND FREE END OF MOTOR WITH OF THERMOSTAT FOR SMOOTH OPERATION OF ACTUATOR ETC COMPLETE AS PER DIRECTION OF EIC. |
| 10 | OVERHAULING OF 750MM DIA B/F VALVE GEAR BOX INCLUDING SUPPLY OF OIL SEAL, O-RING, NUTS, BOLTS & WASHER ETC COMPLETE AS PER DIRECTION OF EIC. |
| 11 | Sub Total |
| 12 | GST 18% |
| 13 | CESS 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysOct 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender