Tender For Pandua-Kulti Road From 0.00 Kmp To 2.10 Km Emergent Repairing And Maintenance Work (In Stretches) Under Kalna Highway Sub Division Of Burdwan South Highway Division In The District Of Purba Bardhaman During The Year 2026-2027. (2Nd Call)
Tender Value
3.30 Lakhs
Estimated cost
Bid Submission
06 Oct 2026
6 days left
EMD
6606
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Purba Bardhaman → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Pandua-Kulti Road From 0.00 Kmp To 2.10 Km Emergent Repairing And Maintenance Work (In Stretches) Under Kalna Highway Sub Division Of Burdwan South Highway Division In The District Of Purba Bardhaman During The Year 2026-2027. (2Nd Call)
BOQ
| Sl. No. | Item Description |
| 1 | Water Bound MacadamProviding, laying, spreading andcompacting stone aggregates ofspecific sizes to water boundmacadam specification includingspreading in uniform thickness, handpacking, rolling with 3 wheeled steel/vibratory roller 8-10 tonnes in stagesto proper grade and camber, applyingand brooming requisite type ofscreening/ binding Materials to fill upthe interstices of coarse aggregate,watering and compacting to therequired density (Reference toMoRT&H's specification 404).By Manual MeansGrading-2 (Table 400-9)Using Screening (Table 400-10)Type-B (11.2 mm aggregate) |
| 2 | Prime CoatProviding and applying primer coat with cationic bitumen emulsion SS1 grade conforming to IS:8887 on prepared porous granular surfaceincluding clearing of road surface and spraying primer using mechanical means (Reference toMORT&H's specification clause 502).On WMM/WBM surface @ 0.85 kg/sqm.Using Cationic SS-I |
| 3 | Tack CoatProviding and applying tack coat with Cationic bitumen emulsion (RS1) complying with IS:8887 using emulsion pressure distributor on the prepared bituminous/granular /cement concrete pavement surface cleaned with mechanicalbroom and high pressure air jet (Reference to MORT&H's specification clause 503).i)On bituminous surface @ 0.25kg /sqm.Using Cationic RS-I |
| 4 | Repairing Pot-holes with Bituminous Macadam(Grading - II, for compacted thickness of upto75mm)Filling Pot Holes with Bituminous Macadam using Mobile Hot Mix plant (6-10 TPH) with approved crushed aggregates of specified grading premixed with bituminous binder @3.4% by wt. of the total mix, transported to site and laid in the pot hole prepared before hand by cuttingthe edges to get a firm vertical face and byremoving all the failed and loose materialsincluding dust and applying tack coat evenly onthe sides and on the surface as perspecification, rolling the filled depression with 8-10 tonne smooth wheeled roller toachieve the desired compaction, including thecost and carriage of stone aggregates andbitumen, hire charges of machinery andequipment, cost of fuel and lubricants andwages of all operational staff, quality controlexcept the cost of tack coat complete as perdirection of Engineer-in-charge. Payment to bemade on the basis of the loose net volume ofthe stone aggregates used in the work. |
| 5 | Filling Pot-holes and Patch Repairswith open-Graded Premixsurfacing, 20mm.Removal of all failed material,in thepavement courses and if necessarybelow the pavement,until the rootcauses of the failure is removed, thetrimming of completed excavationto provide firm vertical faces;specified for the pavement layer;application of tack coat conformingto cl. 503 of MORT&H's specification,on to the sides and base ofexcavation prior to placing hotbituminous material as per clause510 and the compaction,trimmingand finishing of the surfaces of allpatches to form a smoothcontinuous surface, level with thesurrounding road as per therequirement of clause 3004.2 ofMORT&H's specification . |
| 6 | Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using. Type Aand B seal coats (Reference to MORT&H's specification clause 511)Case - II : Type BProviding and laying of premix sandseal coat with HMP using approvedcrushed stone chipping andviscosity grade paving bitumen ofsuitable approved grade. |
| 7 | GST-18% (sgst=9% & cgst=9%)ADD |
| 8 | WEST BENGAL LABOUR WELFARE CESS=0% ADD Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysOct 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender