Tender For Supply & Fitting Of Different Electrical Spares & Electrical Goods At Different Offices Under Bankola Area.
Tender Value
1.63 Lakhs
Estimated cost
Bid Submission
09 Oct 2026
9 days left
EMD
2100
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Paschim Bardhaman → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply & Fitting Of Different Electrical Spares & Electrical Goods At Different Offices Under Bankola Area.
BOQ
| Sl. No. | Item Description |
| 1 | Discription of items |
| 2 | Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductorsingle core cable and 1.5 sq.mm FRLS PVC Insulated copper conductor single core cable as earth wire in existing surface/recessed steel/PVC condult including dismantling as required. |
| 3 | LED Down lighter (SMD Type) (System lumen efflcacy ≥ 105 < 120 Im/Watt ) Supplying, Installation, Testing & Commissioning of LED Recessed/ surface Down lighter (Round/square/ Rectangular) SMD type of following body materlal with PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with Driver as per the requirement with Driverefficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -50C to 400C, internal surge protection of 2.5 KV with Short & Open circult protection , THD < 10% , P. F.20.95, IP20, CRI >80, UGR (Unified Glare Rallng) < 19, Flicker free (flicker should be below 5%), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000*K /4000*K / 5700*K / 6500*K (As per ANSI Bin), SDCM (Standard Deviation Colour Matching) <3,Maximum power consumption should not more than the specified rating and Fixture shall be confirming to relevant BIS standards. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing Complete in all respect 1/c external connectlons with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as reguired with Minimum 5 year OEM warranty. System lumen efficacy ≥105 and <120 Im/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-In-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not riseabove 90℃) Powder coated die cast /Extruded aluminium Body including trim (18 W) |
| 4 | Supplying and fixing 3 pin, 5 A ceiling rose on the exlsting junction box/ wooden block Including connectlons etc. asrequired. |
| 5 | Supplying and fixing brass batten/ angle holder including connection etc. as required. |
| 6 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dla Including accessorles, and provlding masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ cesystem room |
| 7 | LED Batten light (System lumen efficacy 2105 <120 Im/Watt). Supplying, Installation, Testing & Commissioning of LED surface mounted Batten light of following body material and constructlon as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%, Operating voltage AC 140- 270 Volt, frequency 50/60 hz, Operating temp range -5 ℃ to 40 ℃, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10%, P.F.20.95, IP20, CRI >80, Flicker free, (flicker shouldbe below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000*K / 4000*K / 5700*K /6500°K (As per ANSI Bin) SDCM(Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the speclfled rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sqmm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 Im/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in- Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90C). 18-22 Watt |
| 8 | Supply & Fitting of LED bulb 9W |
| 9 | Supply of wall fan |
| 10 | Supply of Celling fan |
| 11 | Fan Repair |
| 12 | Supply of Exhaust fan |
| 13 | Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminatedsheet cover on the fan box etc. as required. |
| 14 | Supply of Almunium wire 6sqmm |
| 15 | Providing and fixing following capacity TP&N disconnector fuse switch unlt inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as requlred. (32 A TP&N) |
| 16 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor,single core cable in surface/ recessed medium class PVC condult as required. (2 X 4 sq. mm + 1 X 4 sq. mm earth wire) |
| 17 | Total impact of GST for the purpose of CTC Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysOct 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender