Tender For Provision Of Hardstand At Dock Block Storage Area, Provision Of Steel Ladders To Buildings P-25A Annex And P-25C To Facilitate Maintenance Of Galvalume Sheet Roofs Wecors And Addition And Alteration To The Room No. 301 In Second Floor Of B
Tender Value
57.71 Lakhs
Estimated cost
Bid Submission
27 Oct 2026
27 days left
EMD
1.11 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Visakhapatanam → Andhra Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Hardstand At Dock Block Storage Area, Provision Of Steel Ladders To Buildings P-25A Annex And P-25C To Facilitate Maintenance Of Galvalume Sheet Roofs Wecors And Addition And Alteration To The Room No. 301 In Second Floor Of Bldg 25B, To Facilitate Installation Of Ste Of Mrsam And Mfstar Equipment, In Wecors At Naval Dockyard, Visakhapatnam Under Ge (I) Dm, Visakhapatnam.
BOQ
| Sl. No. | Item Description |
| 1 | [SCHEDULE 'A' PART-I [B/R WORKS] |
| 2 | Excavating over areas, not exc 1.5 M deep and getting out hard/dense soil and removal from site complete all as specified and directed. |
| 3 | M&L for hardcore of gauge not exc. 63mm of broken stone or boulders, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 4 | M&L for PCC 1:4:8 type D-2 (40mm graded stone aggregate) as in foundation and mass concrete including column foundation, under floor and posts complete all as specified and directed. |
| 5 | M&L for cement concrete work in pavement/hard standing of flexural 40kg/per square centimeter in field using 400kg of cement per cubic metre, thickness of concrete 25cm or less complete all as specified and directed. |
| 6 | M&L for forming 12mm thick expansion joints for thickness of slab 150mm filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ complete all as specified and directed, |
| 7 | M&L for forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade ‘A’ complete all as specified and directed. |
| 8 | Excavating in post holes (or similar holes) each n exc 0.5cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around,soft and loose soil in layers not exceeding 25 cm, complete all as specified and directed. |
| 9 | M&L for PCC 1:3:6 type C-2 (40mm graded stone aggregate) as in foundation and mass concrete including column foundation, under floor and posts complete all as specified and directed. |
| 10 | S & F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 11 | S&F Plates (plain or chequered) Fe-410- W(Gde E-250) quality B square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete. |
| 12 | M&L for preparation of new steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide/ zinc chrome complete all as specified and directed. |
| 13 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 14 | M&L for Pre-painted Galvalume aluminium zink coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof coverings/clading to wall, fixed with self taping screws complete all as specified and directed. |
| 15 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof overing/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 16 | Dismantling of Wall and ceiling boards/ wall partition (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets / aluminium frame work complete all as specified and directed. |
| 17 | Material and labour for partition wall (Pannels of 1.44 sqm (approx) made out of aluminium anodized standard hollow sections 63.50 X 38.10 X 1.95mm thick snap fit beadings, standard rubber gasket, 5.5mm thick sheet glass and 6mm thick prelaminated partical board, interior grade with decorative choice lamination complete all as specified and directed. Note :-The scope of work include for taking down existing damaged aluminium door/window/grill/panels and the unit rate quoted shall be deemed to include for the same. |
| 18 | S&F aluminium door shutter with chowkats made out of hollow aluminium sections as mentioned below, each shutter having 2 Nos ‘D’ type aluminium handles of 200mm long 2 Nos aluminium tower bolts of 150 mm long and 1 No brass mortice lock of 6 lever with key in duplicate. Shutter shall be partly glazed with 5 mm thick sheet glass ordianry quality and partly panelled with 12mm thick particle board, pre-laminated interior grade, prelaminated one side with decorative choice lamination, on other side balancing light grey lamination fixed with glazing clips, rubber beadings and aluminium beadings complete all as specified and directed.Chowkat size : 101.60 x 44.45 x 2.40 mm (1.608 Kg/RM appx)Shutter Top rail : 114.30 x 2.15 mm thick (1.836 Kg/RM appx)Bottom rail: 150.00 x 2.20mm thick (2.376 Kg/RM appx) Middle rail : 83.50 x 1.70 mm thick (1.243 Kg/RM appx)Vertical rail : 85.00 x 1.80 mm thick (1.302 Kg/RM appx) |
| 19 | S&F aluminium extruded type body Door closer hydrau lically regulated, Designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specfied and directed. |
| 20 | M&L for providing mixing and laying of Nitoprime 25+2mm antistatic floor topping which shall provide an effective passage of static charges to the earth when applied over substratew with aqueous antistatic epoxy system , Nitofloor SL Dissipative Undercoat spread at specified coverage at material consumption rate of 12sqm/per 2.4 Ltr pack. The Dissipative of Nitofloor SL Dissipative undercoat is 1x10^6-1X10^5 Ohms and Nitofloor SL Dissipative topcoat at 2mm thickness coverage of 7.5 m^2/15 litre pack @ 2mm thickness of epoxy based antistatic self levelling flooring compound of FOSROC. The surface resistence of Dissipative topping in accordance with BS 2050:1978 (A-1984) and DINEN 1081, 101B, Method 4056, The static conductive topping shall take not more than a time of 0.01seconds of decay +5KV peak charges of 0%. The undercoat shall be connected to earthing device using self |
| 21 | Item No. 1.19 Contd../-adhesive of copper tape in 100mm in length and 20-25mm in width. The above system shall be comply with the provisison of BS 2050-1978 ' specifications for antistatic and dissipative for electric resistence .The coat shall possess a minimum compressive strength of 60KN/mm^2 minimum tensile strength of 11.5N/mm^2, Minimum flextural strength of 28 N/mm^2, preparing the existing surface of floor by light grinding/scarification as per site condition and cleaninf by wire brushing etc to removing all dirts,dust, oil etc to expose clean sound based concrete substrate. Ensuring that the area is completed the application and finishing as per manufacturing\\" specification and as directed by consulatant/clint. |
| 22 | [SCHEDULE 'A' PART-II [E/M WORKS] |
| 23 | Supply, Install,& testing high wall split units indoor/ outdoor, copper, condensor coil & copper evaporater coil complete, electric coil complete, electric driven, single phase with cordless remote control unit and with in build ioniser and plama filter for better indoor air quality of capacity 2.0 TR minimum with 5 star including all copper tubes (as per site requirement), outdoor unit stand all as specified and directed |
| 24 | Supply and fix voltage stabilizer for automatic operation, single phase, naturally air coolder, split type and designed for input variation between 170V to 250V with output voltage stablized at 230V with accuracy of +/- 2.5% and of capacity 5 KVA all as specified and as directed |
| 25 | M & L for submain wiring surface type with 2 runs of 6 sqmm FRLS grade PVC insulated copper conductor wire single core multistrand for phase & neutral, 6 sqmm FRLS grande PVC insulated copper conductor wire for each continuity drawn in and including non material FRLS ISI marked PVC conduit/ casing caping heavy grade with conduit accessories, all as specified and directed. |
| 26 | Supply and fix 220V AC, 50 HZ, single pole and neutral metal enclosure with a two pin and earth plug and socket complete with one single pole MCB of rating 20 Amps all as specified and directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 27 daysOct 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 29 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender