Tender For Repair/ Replacement Of Pathway, Railing, Hard Standing, Plain Cement Concrete Drain And Other Misc Works At Sanjauli Under Ge (I) Jutogh
Tender Value
15 Lakhs
Estimated cost
Bid Submission
27 Oct 2026
4 days left
EMD
30000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Replacement Of Pathway, Railing, Hard Standing, Plain Cement Concrete Drain And Other Misc Works At Sanjauli Under Ge (I) Jutogh
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 20-Oct-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 27-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete in ground floors or pavings n. exc. 15cm thickness below or above ground level, complete all as specified and directed. |
| 2 | Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar, complete all as specified and directed. |
| 3 | M&L for 40mm thick Cement concrete 1:2:4, type B-1, using 40mm garded crushed stone aggregate as in flooring finished even and smooth surface, complete all as specified and directed. |
| 4 | M&L for 75mm thick PCC 1:4:8, type D-2, using 40mm graded crushed stone aggregate as in subbase of flooring, complete all as specified and directed. |
| 5 | M&L for precast interlocking paver block glossy finish of any size and shape confirming to IS 15658-2006 of 80mm thick M-40 Grade with grey cement and pigment set, complete all as specified and directed. |
| 6 | M&L for sand filling under floors, below paver blocks or in foundations including watering and consolidation, complete all as specified and directed. |
| 7 | M&L for coloured chequred cement concrete tiles 30x30x25mm thick (lacquer finish) in grey cement and with pigment in floors etc., set and jointed in neat cement slurry, over and including 20mm thick screed bed in CM 1:6, complete all as specified and directed. |
| 8 | Removing demolished/ excavated material /soil exc. 250m but n. exc. 500m and depositing were directed out of MoD Land, complete all as specified and directed. |
| 9 | M&L for cement concrete 1:2:4, type B-2, using 40mm graded crushed stone aggregate as in surface channels and drains etc complete including necessary formwork and smooth fair finish, complete all as specified and directed. |
| 10 | Demolition of brick or stone masonary built in cement mortar including all quoins arches pillars etc but excluding ashlars facing dressed stone work and precast concrete block, complete all as specified and directed. |
| 11 | M&L for brick work with sub class 'B' bricks old size straight or curved on plan built in CM 1:4, complete all as specified and directed. |
| 12 | M&L for walling of random rubble stone masonry, brought upto courses, well bonded, bedded and solidly hearted built in CM 1:6, including raking or cutting out joints, complete all as specified and directed. |
| 13 | All as per Srl item No 19.00 above but \\"except stone\\" complete all as specified and directed. |
| 14 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking outjoints, hacking for key, scrubbing down with water, etc., complete all as specified and directed. |
| 15 | M&L for plastering work 15mm thick on fair surfaces of stone masonry, brick or concrete surfaces (1:4) to be finished even and fair (without using extra lime or cement), complete all as specified and directed. |
| 16 | M&L for raised pointing to random or polygonal rubble, uncoursed or brought upto coarse in CM (1:4) including raking out existing pointing etc., complete all as specified and directed. |
| 17 | M&L for hand packing broken stones or boulders (any thickness) at the back of walls over arches etc. and raising (or lowering) to the required level, complete all as specified and directed. |
| 18 | M&L for applying Two or more coats of 100% Premium acrylic emulsion paint (weather proof paint on external surfaces) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces at any height of building / tower, complete all as specified and directed. |
| 19 | S&F 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors,complete all as specified and directed. |
| 20 | S&F 5mm thick, plain Polycarbonate translucent sheeting fixed with self tapping, screw & dismantling of old sheet, complete all as specified and directed. |
| 21 | Dismantling wrought iron or mild steel work of any description not otherwise provided, complete all as specified and directed. |
| 22 | Excavating in post holes hard / dense soil (or similar holes) each n. exc 0.50cu.m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n. exc 25cm, watering and removing surplus soil to a distance n exc 50m and making good surface in hard/ dense soil, complete all as specified and directed. |
| 23 | S&F hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled & countersunk for balusters running bars, for doors,balusters,nosing to steps including embeding in concrete & screwing etc. wind ties for roof including securing bolts; posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., & similar work conforming to Fe 290-0, Gde E-165, complete all as specified and directed. |
| 24 | S&F in repair Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings & straining & fixing to any type of standard rails straining bolts, including, securing or tying at crossings with & provision of galvanised mild steel wire, staples or steel pins, etc., (each line wire to be measured), complete all as specified and directed. |
| 25 | Supply only chain link MS galavnised any size and type, complete all as specified and directed. |
| 26 | Fixing only chain link fencing incl line wires any mesh size & type to any type of standards rails straining bolts etc. incl provision of bindig wire, complete all as specified and directed. |
| 27 | M&L for steel screw bolts, machine made, dia of neck 11 to 15mm with hexagonal or square head one end and screwed the other or screwed both ends, each screwed end to be fitted with washer and one hexagonal or square nut exc. 5 cm and n. exc. 10cm long, complete all as specified and directed. |
| 28 | S&F mild steel round bar 10 mm dia and over cut to length bent to shape required including cranking, binding spirally for hooping, for columns,hooking end and binding with MS wire annealed not less than 0.9mm dia or secure with clips, complete all as specified and directed. |
| 29 | S&F framed work as in steel gate in such as grills gratings etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars barred iron doors ladders framed balusters walk ways railings frame work of water tanks and similar work conforming to Fe 290, Gde -E-165, including all fittings and fixtures etc., complete all as specified and directed. |
| 30 | S&F roof trusses (framed) trussed, purlins, posts, crane gantries, rails and fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces cleats Fe 410-W, (Gde-E- 250), quality-A etc., complete all as specified and directed. |
| 31 | S&F welded steel wire fabric weight (not less than 4kg per Sqm) complete to wood or steel members etc., complete all as specified and directed. |
| 32 | M&L for PCC 1:2:4, type B-1, using 20mm graded crushed stone aggregate as in coping to retaining walls/ steps/ parapet/ kerbs/ base of railing post etc., including necessary formwork, complete all as specified and directed. |
| 33 | Dismantling plain or corrugated steel sheeting, with ridge, gutters, etc, any gauge and thickness incl nainital pattern roof covering, fixed with J/L hooks or coach screws, complete all as specified and directed. |
| 34 | S&F pre-painted galvalume aluminium zinc coating having minimum 150gsm GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ clading to wall, fixed with self tapping screws, complete all as specified and directed. |
| 35 | S&F pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/clading to wall, eaves board fixed with self tapping screws, complete all as specified and directed. |
| 36 | M&L for preparation of new steel surface of any description over 10cm in width or girth and applying two coat synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. |
| 37 | M&L for routine maintenance of rolling shutter area of shutter n. exc. 20.00 sqm each (Max heught 5.15 Mtr) :-(a) Taking down hood covers for carrying out routine maintenance and refixing the same (b) Dismantling the MS and CI works of any description such as sheets, shafts, cost iron wheels, lath etc and taking down helical springs, rollers and other accessories etc.(c) Refixing the serviceable accessories such as shafts, helical springs, rollers lath sheets, cast iron wheels etc. (d) Cleaning, oiling, greasing etc complete of all movable parts all as required at site. (e) Gear box and helical spring shall be also included. |
| 38 | M&L for preparation of old steel surface of any description over 10cm in width or girth and applying two coat synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 20, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 27, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 daysOct 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender