Tender For Addition/ Alteration And Special Repair To Certain Otm Accn At Sevoke Road Military Station Under Ge Sevoke Road
Tender Value
3.61 Crore
Estimated cost
Bid Submission
06 Nov 2026
19 days left
EMD
4.36 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kalimpong → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addition/ Alteration And Special Repair To Certain Otm Accn At Sevoke Road Military Station Under Ge Sevoke Road
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 14-Oct-2026 | Date_Corrigendum1 | Date | 06-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Material & labour for Brickwork with fly ash modular bricks, straight or curved on plan exc 6m mean radius, built in CM(1:6), complete as all specified and as directed. |
| 2 | Material & labour for Brickwork with flyash modular bricks, straight or curved on plan to any radius in half brick thick walls, built in CM(1:4),complete all as specified and directed. |
| 3 | Material & labour for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM(1:4), complete all as specified and as directed. |
| 4 | Material & labour for Brickwork with sub class 'B' bricks straight or curved on plan exc. 6m mean radius built in CM(1:6), complete all as specified and as directed |
| 5 | Material & labour for cutting chases, pinning in brick wall making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth, complete all as specified and as directed. |
| 6 | Material & labour for RCC (design mix) of grade M-25 (using 20 mm graded aggregate) beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified and as directed. |
| 7 | Material & labour for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide for Rough finished surface of concrete, complete all as specified and as directed. |
| 8 | Material & labour for Mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending, etc and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed. |
| 9 | All as item No. 8 above but of 5mm dia and over upto and including 10mm dia as in stirrups, rings spacers and binder, complete all as specified and as directed. |
| 10 | Material & labour for Mild steel Framed work such as grills, gratings etc, with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, framework of water tanks and similar work conforming to Fe -290 Grade -E-165, complete all as specified and as directed. |
| 11 | Material & labour for Mild steel Rolled sections as in column, vertical posts, main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates etc. conforming to Fe- 410-W (Gde E-250) quality -A complete all as specified and as directed |
| 12 | Material & labour for cement concrete 1:2:4 type B-2 (using 40mm graded aggregate) as in foundation (post hole), filling & mass concrete, complete all as specified and as directed. |
| 13 | Material and labour for Steel work in tubular trusses, tubular rafters, stanchions and purlins trusses, tubular pipe sections as in main and cross beams, hip and jack rafters, purlins including special shaped washer etc. complete using ERW or induction butt welded tubes with necessary welding, bolting, special shaped washer, clamps, cleats conforming to I.S.-1161-1979 grade St.-240, complete all as specified and as directed. |
| 14 | M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide, zinc chrome primer, complete all as specified and directed. |
| 15 | Material & Labour for preparation of new steel surfaces of any description n.exc 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed. |
| 16 | Supplying & Fixing of pre-painted galvalume aluminium zinc coating GI based semi-corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws, complete all as specified and as directed. |
| 17 | Supplying & Fixing of pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed |
| 18 | Material & Labour for 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws, 60x60 cm in size, fixed with nails to timber frame work or with staples on snap grid if fixed in ceiling, flat or sloping including anodised aluminium snap grid framework for false ceiling, hangers of 6 mm dia. G.I. (upto1200mm length), adjusting level and fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia., 40mm long, complete all as specified and as directed. |
| 19 | Material & Labour for rendering 15mm thick cement plaster in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement), complete as all specified and as directed |
| 20 | Material & Labour for Preparation of new-plastered surfaces of walls including pilasters and cornices etc, and applying two coat of distemper oil emulsion over a coat of primer as per manufacturers instruction, complete as all specified and as directed. |
| 21 | M&L for rendering 20mm thick cement plaster in cement mortar (1:4) in two layers of 10mm thick, each layer mixed with water proofing compound as per manufacturer’s instructions on top layers, finished even and smooth without using extra cement, complete all as specified and as directed.(Note:- Water proofing compound shall be measured and paid separately as “supply only”). |
| 22 | Supplying only of Integral Water proofing compound, as all specified and as directed. |
| 23 | Material & Labour for applying two or more coats of 100% premium Acrylic emulsion paint having VOC less than 50 gm /litre and UV resistance as per IS 154B9:200, alkali and fungal resistant, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/10 sqm over and including primer coat of exterior primer applied @ 0.90 litre/10 sqm incl damp coat over new surfaces, complete all as specified and as directed. |
| 24 | Material & Labour for 7mm thick glazed coloured ceramic tiles in vertical surfaces of size 350 x 250 mm / 450 x 350mm, set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of the tile, over and including 10mm thick rendering in CM (1:3) on fair faces of brickwork, complete all as specified and as directed. |
| 25 | Material & Labour for non skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) polished, area of each tile exceeding 0.06 Sqm but not exceeding 0.11 sqm as in floor etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the colour of the tile, over and including 20mm thick cement mortar screed bed in CM (1:6), complete all as specified and as directed. |
| 26 | Material & Labour for non skid coloured ceramic tiles 7-8mm thick (square or rectangular) ,area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of the tile over and including 20mm thick cement mortar screed bed in CM 1:6,complete all as specified and as directed |
| 27 | Material & Labour for non skid coloured ceramic tiles 7-8mm thick (square or rectangular) ,area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of the tile, over and including 10mm thick rendering in CM (1:3) as in backing coat for skirting, complete all as specified and as directed. |
| 28 | Material & Labour for non skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular), polished, area of each tile exceeding 0.18 Sqm but not exceeding.38 sqm as in floor etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the colour of the tile, over and including 20mm thick cement mortar screed bed in CM (1:6), complete complete all as specified and as directed. |
| 29 | Material & Labour for non skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) polished, area of each tile exceeding 0.18 Sqm but not exceeding.38 sqm as in skirting etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the colour of the tile, over and including 10mm thick cement mortar screed bed in CM (1:3) etc, complete complete all as specified and as directed. |
| 30 | Material & Labour for light shade vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of the tile, over & including 20mm thick cement mortar screed bed in CM (1:6), complete all as specified and as directed. |
| 31 | Material & Labour for light shade vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of the tile, over & including 10mm thick cement mortar screed bed in CM (1:3), complete all as specified and as directed |
| 32 | Material & Labour for kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar, laid over & including 15mm thick cement mortar screed bed in CM (1:3), set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, complete all as specified and as directed |
| 33 | Material & Labour for Machine cut kota stone slab flooring 20-25mm thick, laid over & including 20mm thick cement mortar screed bed in CM (1:6), set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and as directed |
| 34 | Material & labour for 20mm thick granite slabs/Tiles (of any type) laid in floors/treads over and including 20mm thick cement mortar screed bed in CM (1:6), set and jointed in neat cement slurry and pointed in white cement with admixture of pigment to match the shade of granite, complete all as specified and as directed. |
| 35 | Material & labour for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of grade M-35 with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and as directed. |
| 36 | Material & labour for 25 mm thick Chequered cement concrete tiles of size 20cm x 20cm/ 30cm x 30cm laid in floors over & including 20mm thick cement mortar screed bed in CM (1:6) set, jointed and pointed in neat cement slurry, complete all as specified and as directed. |
| 37 | Material & labour for 75 mm thick PCC type C-2, 1:3:6 (40mm graded aggregate ) as in sub base, complete all as specified and as directed. |
| 38 | Material & labour for 100mm thick cement concrete type B-1,1:2:4 (using 20mm graded aggregate.) as in PCC floor, complete all as specified and as directed. |
| 39 | Material & labour for 75 mm thick PCC type C-2,1:3:6 (using 40mm graded aggregate) finished even and smooth without using extra cement as in plinth protection, paths , steps etc complete all as specified and as directed. |
| 40 | Material & labour for PCC type B1,1:2:4 (using 20mm graded aggregates) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed |
| 41 | Supplying and fixing in position in the opening, solid PVC door frame of size 50mm X 47mm made out of 5mm thick plain-coloured PVC sheet, reinforced with M.S Square tube, complete all as specified and as directed. |
| 42 | Supplying & fixing in the frame at site as per specification & drawing, Factory made solid panel PVC door shutter, 30 mm thick (style), consisting of frame made out of M.S. tubes for top & bottom rails.The M.S. frame shall be covered with heat-moulded plain-colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 43 | Supplying & fixing in the frame at site as per specification & drawing, Factory made solid panel PVC door shutter, 30 mm thick (style), consisting of frame made out of M.S. tubes for top & bottom rails.The M.S. frame shall be covered with heat-moulded plain-colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 14, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 06, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 19 daysNov 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysOct 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender