Tender For Repair/Replacement Of Sanitary Fittings,Tiling And Pvc Wall Panelling /Ceiling And Certain Other Misc B/R Items At Officer Mess, Officer Guest Rooms And Other Vip Institutions Under Aor Of Age B/R-I At Afs Chakeri.
Tender Value
48 Lakhs
Estimated cost
Bid Submission
14 Oct 2026
14 days left
EMD
96000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kanpur Nagar → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Replacement Of Sanitary Fittings,Tiling And Pvc Wall Panelling /Ceiling And Certain Other Misc B/R Items At Officer Mess, Officer Guest Rooms And Other Vip Institutions Under Aor Of Age B/R-I At Afs Chakeri.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing , removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 2 | M&L Light shade Vitrified Ceramic tiles (10 mm thick (square/ rectangular) polished, size of tles 600mm X 1200mmx9-10mm thick using spacers in floors etc over 15mm thick over screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 3 | ditto as per serial item No-02 but as in dado/skirting etc over 10mm thick plaster in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete, complete all as specified and directed. |
| 4 | M&I Glazed ceramic tiles in vertical surface 300x 600x 7 mm/ 450X 350X 8-10mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick cement plaster as backing coat in CM (1:4) complete all as specified and directed. |
| 5 | M & L for 7 to 8 mm thick anti- skid ceramic coloured digital tiles (Square/ rectangular) area of each tile 300x400mm set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 15 mm thick screed bed or bedding in CM (1:6) complete all as specified and directed. |
| 6 | M & L for 18-20 mm thick granite (of any type) work (table rubbed and polished) in steps jambs, pillars, window cills cooking platforms and like in CM (1:4) over and including screed beading CM (1:6) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, cutting and moulding edges complete including taking out old one complete all as specified and directed. |
| 7 | M&L heavy duty textured /anti skid surfaces, full body vitrified tiles of size 600X600X15mm thick high value breaking/impact strength over 20mm thick screed bed in CM 1:4 complete all as specified and directed |
| 8 | M & L for fixing of 200x1000mmx9mm thick Ceremic wooden planks/Tiles of rectangular in size fixing over 15mm thick in screed bed in CM 1:6,set and jointed and pointed with wihte or coloured cement to match the surfaces complete all as specifed and directed. |
| 9 | Taking down cement plaster on bricks or stone walls etc., including raking out joints, hacking for key scrubbing down with water etc complete all specified and directed. |
| 10 | M&L for rendering 15 mm thick in CM ( 1:6 ) plaster on wall/ concrete surfaces finish even and smooth without using extra cement including two coat of cement base paint over coat cement primer complete all as specified and directed. |
| 11 | M&L for rendering 15mm thick on fair faces of brick or stone masonary in CM (1:6) finished fair and even without using extra cement and applying two coats of OBD over one coat of wall primer including 2mm thick wall care putty complete all as specified and directed. |
| 12 | M&L for rendering 10 mm thick after dubbing out average 10 mm thick on irregular face of ceiling in CM (1:3) finished even and fair without using extra cement, including chicken wire mesh fixed with nails or screws etc and applying three coats of white wash after preparation of surfaces complete all as specified and directed. |
| 13 | M&L for finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm and including preparation of surfaces complete all as specified and directed. |
| 14 | Taking down chowkhats or frames of size not exceeding 1.5 sqm each but with shutters (without taking off shutters from the frame), and removing from site complete all as specified and directed. |
| 15 | Taking down chowkhats or frames exceeding 1.5 sqm each but not exceeding 4.00 Saqm each with shutters (without taking off shutters from the frame), and removing from site complete all as specified and directed. |
| 16 | Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both havingwall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) comprising of uPVCmulti-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section madefrom roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDMgasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one sidekey, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-inCharge. (Glass shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this accountshall be made.2. Unit rate quoted by contractor shall be inclusive of frame of suitable section, builder hardware and other accessories complete. No extra payment shall be admisssible on this account. |
| 17 | Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (109 mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) (A) Area not exceeding 2.00 sqm each complete all as specified and directed. |
| 18 | S&F 5.50mm thick Sheet glass, ordinary quality and glazing with PVC Beads square n exc 0.5 sq. m in each pane complete all as specified and as directed. |
| 19 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and as directed. |
| 20 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 125 mm for double shutter door comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 21 | Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note : All fittings and fixtures such as Soft closer, handles, piano hinges etc for shutter should be included rated quoated by the contractor. Please Enable Macros to View BoQ information |
| 22 | Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note : All fittings and fixtures such as Soft closer, handles, piano hinges etc for shutter should be included rated quoated by the contractor. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysOct 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender