Tender For Conversion Of Charpoy Gi Pipe With Newar Into Plywood Top And Repair To Other Misc Furniture Ge (East) Delhi Cantt-10
Tender Value
30 Lakhs
Estimated cost
Bid Submission
20 Oct 2026
2 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Conversion Of Charpoy Gi Pipe With Newar Into Plywood Top And Repair To Other Misc Furniture Ge (East) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Work will be executed where the furniture exist in different User Units/ Married Accn of GE(East) Delhi Cantt including BSO Furniture Yard as directed by Engineer-in-Charge. 1st class teak wood shall be used in all timber works. |
| 2 | Converison of Charpoy GI pipe Nylon newar to ply top :- (FD-220) |
| 3 | Removing of old unserviceable plastic newar from existing Charpoy GI Pipe, reassembling/ tightening of Charpoy frame and providing providing 12 mm thick plywood top BWP Grade (Make: Gold from Greenply/Gold from Archidply/ Club Prime from Century Ply) as per existing shape and size with shunken nut/bolts, appropriate hole shall be made with elecrtic drill machine complete AND 12mm x 6mm thick teak wood beading half round along with the edges duly smoothened of the plywood and rounded at corner fixed with fevicol and headless nails all as directed by Engr-in-Charge. |
| 4 | S& F 2 Nos MS flat iron Stiffener in each charpoy in equal distance of size 35mm x 6mm with round headed steel bolt, nut and washer of suitable size to GI pipe charpoy frame and rough edges of stiffeners smothended by grinding. Stiffeners to be provided two coats of synthetic enamel paint over a red oxide. Plytop to be fixed with 08 number of round headed bolt. |
| 5 | Removing of old unserviceable/broken Elbow and S&F new 03 way GI Elbow 70mm long of 32mm dia ISI marked and fixing in position complete all as shown on drawing. (Wt. not less than 420gm per elbow). |
| 6 | Removing of old unserviceable/broken check nut and S&F new 06 mm thick ISI marked GI check nut of 32mm dia complete all as shown on drawing. |
| 7 | Table 3x2 with and w/o drawer steel |
| 8 | Welding wherever required as directed by E-in-Incharge |
| 9 | Removing of old unserviceable top and S&F of new Top 18 mm thick of size 3'x2' with drawer steel made of MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Prowud from Century Ply/Green Panelmax from Geenply) duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg. |
| 10 | Removing of old unserviceable top and S&F of new Top 18 mm thick of size 3'x2' without drawer steel made of MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Prowud from Century Ply/Green Panelmax from Geenply) duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg. |
| 11 | Repairs to Drawer by replacing old u/s parts with new parts and providing roller bearing including tinkering/denting, welding, etc. all as shown, as specified & as directed by Engr-in-Chgarge. |
| 12 | Removing of old unserviceable shoe and S&F of new Rubber shoe std quality as per drg |
| 13 | Removing of old unserviceable lock and S&F of new Lock of drawer as per drg (Make : Rydass/ Link/ EBCO) |
| 14 | Removing of old unserviceable MS section and S&F of new MS section any member as per drawing. |
| 15 | CHAIR Writing (MAP) WITH ARM/ Visitor Chair |
| 16 | S & F of new seat made from 12mm thick BWR grade ply complete with 06 Nos Nut bolt & washers duly completed with 40 density foam cushion of size 435mm x 410mm duly covered with best quality leatherite cover of DCM/Indian Handloom of approved shade and of rate ranging between Rs. 200/- to Rs. 250/- per meter and fixing the same all as per drawing and as directed. Make of Cushion :- Sleepwell / Feather-foam / Kurl-on. |
| 17 | S & F of new back made from 12mm thick BWR grade ply complete with 06 Nos Nut bolt & washers duly completed with 40 density foam cushion of size 305mm x 305mm duly covered with best quality leatherite cover of DCM/Indian Handloom of approved shade and of rate ranging between Rs. 200/- to Rs. 250/- per meter and fixing the same all as per drawing and as directed. Make of Cushion :- Sleepwell / Feather-foam / Kurl-on. |
| 18 | Removing of old unserviceable shoe and S&F of new Rubber shoe std quality as per drg |
| 19 | Welding work wherever required with FI as directed by EIC |
| 20 | S & F of new handle as per drg replacing the UNSV handle as per direction of Engr-in-Charge or GE. |
| 21 | Locker Steel: FD-1029/257/SKD-562 |
| 22 | Removing of old unserviceable Hasp & Staple and S&F of new S/S Hasp & Staple, rest as per drg |
| 23 | Repairs to door/sides including replacement of hinges including welding |
| 24 | Removing of old unserviceable Shutter/door and S&F of new Shutter/door as per drg. |
| 25 | Removing of old unserviceable leg and S&F of new Legs as per drg |
| 26 | Removing of old unserviceable handle and S&F of new CP Handle as per drg or directed by Engr-in-Charge |
| 27 | Removing of old unserviceable conduit pipe and S&F of new CP Conduit pipe as per drg |
| 28 | Removing of old unserviceable Shelf and S&F of new Shelf as per drg. |
| 29 | Shoe Rack Steel FD/E6/MAP/02® |
| 30 | Welding including bar wherever required as directed by E-in-Incharge |
| 31 | Removing of old unserviceable Jali and S&F of Jali wherever required as per drg |
| 32 | Removing of old unserviceable shoe and S&F of Hard rubber shoes std quality as per drg |
| 33 | Teapoy Verandah (O) (Drg No. FD/E6/MAP/17) |
| 34 | Removing of old unserviceable Top and S&F of new Top made out of 18 mm thick BWP grade plywood (Make: Greenply/ Archidply/ Century ply) over which pasting of sunmica 0.80mm ( Make: Greenply /Archidply/Century ply) of shade approved by EIC/GE with suitable adhesive on one side and balancing white sunmica on other side all as directed by GE/EIC. |
| 35 | Removing of old unserviceable MS pipe and S&F of new MS pipe any as per drg |
| 36 | Removing of old unserviceable MS Bar and S&F of New MS Bar Mesh as per drg |
| 37 | Welding work wherever required as directed by EIC. |
| 38 | Bed Hard Steel (FD/E6/MAP/08(R)) |
| 39 | Material and labour for in replacement of top of bed ply wood with 12 mm thick commercial plywood, BWR grade 303 (Make: Greenply /Archidply / Century ply), ISI marked ply fixed on the top of bed Hard steel with screws fixed with existing mild steel GI bolts of 6mm dia of suitable lengths including washers and nuts complete all as specified and shown in drawing and as directed . |
| 40 | Material and labour for welding of broken joints of Bed Hard Steel including preparation of surface complete, rest all as shown on drg and directed. |
| 41 | Material and labour in reapir of head board of size 635 mm X 200 mm made from 18mm thick pre-laminated particle board exterior grade both side decorative finish shade as approved by GE complete including removal of damaged head board all as specified on drawing and directed. |
| 42 | Material and labour in reapir of foot board of size 635 mm X 200 mm made from 18mm thick pre-laminated particle board exterior grade both side decorative finish shade as approved by GE complete including removal of damaged head board all as specified on drawing and directed. |
| 43 | Material and labour for for in replacement of Rubber shoe and new rubber shoe of size 25mm square to be fixed as per sample |
| 44 | Repair to Table Computer |
| 45 | Material and labour for in replacement of top of table computer with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture as directed) and pvc tape edging all around the table top, complete, all as specified and shown in drawing and as directed . |
| 46 | Material and labour for in replacement of keboard drawer and side drawer of table computer with fitting of channel and pvc tape edging all as specified and shown in drawing and as directed . |
| 47 | Material and labour for in replacement of CPU, UPS shelf of table ith 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type (Shade and texture as directed) and pvc tape edging all around the shelf complete all as specified and shown in drawing and as directed. |
| 48 | Taking out old unserviceable powder coated telescopic channels of 1.6mm thick and S & F new powder coated telescopic channels of 1.6mm (Make: Hettich/Ebco/Quba/ Klazovyn) thick fitted in drawers complete all as specified and shown in drawing and directed. |
| 49 | TABLE BED SIDE : (FD/E6/MAP/15 R) |
| 50 | Removing of old unserviceable back and S&F of new Back of 6 mm thick ply BWP grade plywood (Make: Greenply/ Archidply/ Century ply) shall be used as per shape and size shown in drg. |
| 51 | Removing of old unserviceable Top and S&F of new Top made out of 18 mm thick prelaminated particle board exterior gde (Make: Greenply/ Archidply/ Century ply) of shade approved by EIC/GE with suitable adhesive on one side and balancing white sunmica on other side all as directed by GE/EIC. |
| 52 | Removing of old unserviceable sides and S&F of new Sides made out of 18 mm thick prelaminated particle board exterior gde (Make: Greenply/ Archidply/ Century ply) of shade approved by EIC/GE with suitable adhesive on one side and balancing white sunmica on other side all as directed by GE/EIC. |
| 53 | Removing of old unserviceable drawer large and S&F of new Drawer Large made of 18 mm thick prelaminated particle board exterior gde and 06mm thick bottom made of ISI marked, BWR grade commercial plywood. (Make :- Archid /Action- Tesa / Greenply)as approved by EIC/GE in front, sides and complete. Telescopic channel (Make: Hettich/Ebco/Quba) and CP Handle 4\\" (Make: Hettich/ Ebco/ Quba) be provided in Drawers all as directed by GE/EIC and as per drg. |
| 54 | Removing of old unserviceable Drawer Small and S&F of new Drawer Small made of 18 mm thick prelaminated particle board exterior gde and 06mm thick bottom made of ISI marked, BWR grade commercial plywood. (Make :- Archid /Action- Tesa / Greenply)as approved by EIC/GE in front, sides and complete. Telescopic channel (Make: Hettich/Ebco/Quba) and CP Handle 4\\" (Make: Hettich/ Ebco/ Quba) be provided in Drawers all as directed by GE/EIC and as per drg. |
| 55 | Welding work wherever required as directed by EIC. |
| 56 | Removing of old unserviceable Shoe and S&F of new PVC shoe as per sample. |
| 57 | Supply and fixing including preparation of glass top of 12 mm thick (Make: Modiguard/ Swastik/ saint gobain) webling through out the all sides of glass various sizes to fix at the existing tables. Rest all as directed by Engr-In-Charge |
| 58 | SOFA SET 05 SEATER WITH CUSHION (FD : 258,373 & 281) |
| 59 | S &F of Cushion complete with 40 dennsity PU foam of size 22”X21”X110mm (Make:Sleepwell/ (Primocool)/Komfort Universe (Poly Cool) as approved by EIC/GE. with upholstery of tapestry cloth of range not less than Rs. 350/mtr (Sample kept with BSO as approved colur, shade & quality and providing a chain best quality (at either of 21\\" side) of Make : YKK or approved quality with two runners at both ends as approved by EIC/GE. |
| 60 | Removal of tapestry cloth from existing seat/back of Sofa set 05 seater and S & F new Cushion cover of tapestry cloth of range not less than Rs. 350/mtr (Sample Kept in BSO) of approved colour, Shade and quality quality and providing a chain best quality (at either of 21\\" side) of make YKK with two runners at both ends as approved by EIC/GE. |
| 61 | CHAIR DINING CUSHION (FD/E6/MAP/10 R) |
| 62 | Removing old unserviceable leatherite cover and margin cloth from the seat of the chair and S&F new tapestry cover to the seat (duly covered from all the sides incluing bottom of the chair) and of the range not less than Rs.210/- per meter. Colour, shade and quality of tapestry shall be as approved by the GE complete all as specified and directed including tightening the joints, screwing, weldging, glueing, providing hinges,denting, placing everypart in-tact. |
| 63 | Removing old unserviceable foam cushioned seat from existing chair dining cushioned and S&F new 75 mm thick ,32 density foam seat of (Make: Sleepwell/Featherfoam/Kurl-on )to chair dining duly covered with tapestry cover of range not less than Rs.250/- per meter, colour, shade and quality of tapestry shall be as approved by GE complete all as specified and directed including tightening the joints, screwing, weldging, glueing, providing hinges,denting, placing everypart in-tact. |
| 64 | RECANNING TO DIFFERENT TYPE OF CHAIR :Recanning of following wooden chair of different type with 02mm wide cane having 03mm wide plastic cane border in godrej pattern all as shown on drg. Make shah/ aryan & premier. |
| 65 | Chair dining |
| 66 | Chair writing |
| 67 | Chair easy |
| 68 | RECANNING TO CHAIR VERANDAH :Recanning of seat & back of chair verandah with size of 04mm thick plastic cane in Godrej pattern all as shown on drg and . Make shah/ aryan & premier. |
| 69 | Replacement of existing top of following furniture article with new top of Top 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Ply/Archid ply duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 1.6 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg including tightening the joints, screwing, weldging, glueing, providing hinges,denting, placing everypart in-tact, for following items |
| 70 | Table 3'X2' with / without Drawer |
| 71 | Table Dining 4 Persons : |
| 72 | Table Dining 6 Persons : |
| 73 | Table Dining 8 Persons : |
| 74 | Table writing |
| 75 | Table Centre |
| 76 | Teapoy |
| 77 | Peg Table |
| 78 | M&L for melamine polish high gloss/mate finish with spray machine applying shellac,wood filler,shelar etc after removing of complete existing polish making surface smooth by sand paper (Emery paper) with standard workmanship as directed by EIC to the following furniture articles of MES pattern viz F/DB/FD/MAP series/TP or Similar items incl applying wax for depressed surface as well as washing with caustic soda wherever required before polishing all as specified and all as directed by Engineer-in-Charge. Shade of polishing will be directed by GE/Engr-in-Charge. |
| 79 | Table 3'X2' with / without Drawer |
| 80 | Table Dining 4 Persons : |
| 81 | Table Dining 6 Persons : |
| 82 | Table Dining 8 Persons : |
| 83 | Table writing |
| 84 | Table Centre |
| 85 | Teapoy |
| 86 | Peg Table |
| 87 | CHAIR DINING CUSHION (FD/E6/MAP/10 R) |
| 88 | Almirah Large Steel : FD-67 / 1031/MAP/18/ TP |
| 89 | Removing of old unserviceable lock and S&F of new S/S 6 lever locks (Make-Godrej/ Hettich/ Harrison/mydas/Rina) as per drg |
| 90 | Removing of old unserviceable handle and S&F of new CP Handle as per sample/as per drg |
| 91 | Removing of old unserviceable leg and S&F of new Legs as per drg |
| 92 | Repairs to door as specified including replacement of hinges |
| 93 | Repair/adjustment to existing shelf including welding as per drg |
| 94 | Removing of old unserviceable Shutter/door and S&F of new Shutter/door as per drg. |
| 95 | Removing of old unserviceable shelves and S&F of new shelves as per drg |
| 96 | Removing of old unserviceable 3 way locking arrangement and S&F of new 3 way locking arrangement complete including MS bar |
| 97 | Almirah Medium / Small Steel: FD-1032/FD-104(M) |
| 98 | Removing of old unserviceable lock and S&F of new S/S 6 lever locks (Make-Godrej/ Hettich/ Harrison/mydas/Rina ) as per drg |
| 99 | Removing of old unserviceable handle and S&F of new CP Handle as per sample/as per drg |
| 100 | Removing of old unserviceable leg and S&F of new Legs as per drg |
| 101 | Repairs to door as specified including replacement of hinges |
| 102 | Repair/adjustment to existing shelf including welding as per drg |
| 103 | Removing of old unserviceable Shutter/door and S&F of new Shutter/door as per drg. |
| 104 | Removing of old unserviceable shelves and S&F of new shelves as per drg |
| 105 | Removing of old unserviceable 3 way locking arrangement and S&F of new 3 way locking arrangement complete including MS bar |
| 106 | M & L for painting two coats of hammer Tone paint with shade as approved by EIC/GE over a coat of primer through spray machiine, both internally & externally to the following furniture articles, viz F/FD/DB/MAP/TP series or similar items encluding removing of dust , dirts dents etc and existing paint both internally & exernally by applying paint removeer/scrapping with emery paper without damaging to surface, applying putty to level the surface before primer/painting all as specified and shown on dgrs and directed by Engineer-in-Charge. There will be a one day gap between every stage of painting. |
| 107 | Almirah Steel Medium/Small: FD-1032 |
| 108 | Almirah Steel Large: FD-67/351, 1031/MAP-18 |
| 109 | CHARPOY GI PIPE WITH PLYWOOD TOP (FD-220) |
| 110 | Chair Verandah: MAP/FD |
| 111 | Table 3x2 steel with and w/o drawer |
| 112 | Table 3x2 steel with and w/o drawer |
| 113 | Teapy verandah map |
| 114 | Chair writing map |
| 115 | Bed Hard Steel (FD/E6/MAP/08(R)) |
| 116 | Locker Steel: FD-1029/257/SKD-562 |
| 117 | Shoe Rack Steel FD/E6/MAP/02® |
| 118 | Table computer Map |
| 119 | TABLE BED SIDE (FD/E6/MAP/15 R) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysOct 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender