Tender For Addn/Altn And Upgradation Of Entrance Flooring, Pathway Near C-20, Water Drainage System And Misc Works Of Building No C-2 And Plumbing System With Misc Works Building No C-2 At Vijay Durg Under Ge(Vd) Kolkata
Tender Value
36.50 Lakhs
Estimated cost
Bid Submission
20 Oct 2026
17 days left
EMD
73000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addn/Altn And Upgradation Of Entrance Flooring, Pathway Near C-20, Water Drainage System And Misc Works Of Building No C-2 And Plumbing System With Misc Works Building No C-2 At Vijay Durg Under Ge(Vd) Kolkata
BOQ
| Sl. No. | Item Description |
| 1 | B/R PORTION Demolition of stone slabs , floor and wall tiles of any description or thickness in floors/vertical surfaces, etc laid, bedded and pointed in any mortar, etc complete all as specifed and directed by Engineer-in-charge. |
| 2 | Demolition of cement concrete of any description and in any position not other wise specifically provided for complete all as specified and as directed. (upto 04 storey High of building) |
| 3 | Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 4 | Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in- Charge. (Glass shall be paid separately)Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 5 | M&L 40 mm thick PCC 1:2:4 Type B-0 ( using 12.50 mm graded crushed stone aggregate) as in sub base of floor complete all as specified and as directed by Engineer-in-charge. (upto 04 storey High of building) |
| 6 | S&F in repair vitreous chine wash hand basin Table Top of size 565mm x 420mmx140mm (any selected colour) Product Range -(KUBIX) Make :Jaquar Product code no- KUS-WHT-35935. |
| 7 | M&L Granite (of any type) work (table rubbed and polished) in cantilever base for table top wash hand basin by cutting into wall in cement mortar (1:4) including pointng in white cement (1:2) using marble dust with admix- ture of pigment to match with shade of granite all as specified and as directed by Engineer-in-Charge |
| 8 | Taking down or up 15mm bore galvanised iron pipe and connection complete all as specified and as directed |
| 9 | S&F 15mm bore galvanised iron pipe with all fittings after cleaning fixed to wall/ceiling or laid in floors complete all as specified and as directed |
| 10 | S&F in repair Block boards 18 to 19 mm thick, grade 2 quality, i n t e r i o r grade, commercial type, fixed with screws to timber frame-work( as in cup board) incl taking down old one.complete all as specified and as directed. |
| 11 | S&F Decorative laminate type ( 0.9 mm thick) of surface finish, colour and pattern as approved, fixed with approved adhesive as per anufacturer's instructions complete all as specified and as directed |
| 12 | S & F Continuous (piano) brass hinges ,SS, bright finish or electrogalvanised, width of flap 40 mm complete all as specified and as directed |
| 13 | S&F 150 mm Extruded brass handles, fabricated type polished decorative type complete all as specified and as directed |
| 14 | S&F brass multi purpose cupboard lock , size 75 mm , 4 lever complete all as specified and as directed. |
| 15 | S&F any size bevelled edge 5.00 mm thick LED mirror of selected quality glass MP incl 10Amp adaptor and 10 Amp sensor with 220 V concealed white , semi warm and warm coloured LED strip complete all as specified and as directed. |
| 16 | S&F CP grating of 450 mm x 100mm (S/S 304 ) Line grating (shower drain chanel) with cockroach trap , fixed with cement mortar (1:3).complete all as specified and as directed . |
| 17 | M & L Salt-gauged stoneware gully traps, square or round mouthed, type 'P', size 150 x 150 mm complete all as specified and as directed |
| 18 | S&F in repair CI Nahani trap of 100mm dia, including jointing to waste pipe fixed in cement concrete, (1:2:4) type B1 (using 20 mm graded crushed stone aggregate) complete all as specified and as directed by Engineer-in-charge. (upto 04 storey High of building). |
| 19 | S&F hold fast for window & doors, made to shape as required complete all as specified and as directed |
| 20 | S & F 200 mm long Brass Finish anodised barrel tower bolt of extrued section complete all as specified and as directed |
| 21 | S&F 100 mm long butt hinges MS medium weight cold rolled complete all as specified and as directed. |
| 22 | M&L for PCC 1:2:4 type B1 20mm graded aggregatea as in copping, bed hold fast etc. all as specified and directed. |
| 23 | Supply and fix toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required. |
| 24 | S & F solar control film 25 micron reflective type (garware sun control or equivqlent ) complete all as specified and directed . |
| 25 | M&L preparation of old surfaces surfaces of ceiling and applying two coat of plastic emulsion paint over a coat of primer and 3 mm thick wall care putty all as specified. |
| 26 | S&F in repair 15 mm angular stop cock chromium plated with wall flange complete all as specified and as directed .(Make : Jaqur cat no- KUP-35053PM or other make specified in tender. |
| 27 | S&F In repair CP Bottle Trap 32mm Size with 300mm & 190mm Long Wall Connection Pipes & Wall Flange complete all as specified and as directed (Make : Jaqur cat no- ALD-769L300x190 or other make specified in tender. |
| 28 | S&F in repair CP waste coupling 32mm bore full threaded complete all as specified and as directed ( Make : JAQUAR cat No. ALD-705L130 or other make specified in tender. |
| 29 | S&F in repair chromium plated Toilet Roll Holder with Stainless Steel Flap ) all as specified.( Make : Jaquar Cat No: ACN-1153S or other make specified in tender. |
| 30 | S&F in repair Towel Ring Round with Round Flange all as specified.(Make : Jaqur cat no- ACN-1121BN )(Chrome) or other make specified in tender. |
| 31 | S&F Chromium plated Single Lever Basin Mixer with Popup Waste with 450mm Long Braided Hoses fixed with 15 mm bore iron pipe as in repair etc complete as specified and as directed.( Make- Jaquar Cat no-KUP-35051BPM or other make specified in tender. |
| 32 | S&F in repair 15mm bore two way bib cock with wall flange chromium plated complete as specified and as directed. (Make : Jaqur cat no- KUP-35041PM ) or other make specified in tender. |
| 33 | S&F in repair 15mm bore bib cock with wall flange for 15mm bore pipe chromium plated (Chrome) all as speified.(Make : KUP-35037PM) or other make specified in tender. |
| 34 | S&F in repair 15mm dia Hand Shower (Health Faucet) with 1 Meter Long Easy Flex Tube and Wall Hook with N.R.V (Back Flow Preventer) complete as specified and as directed. (Make : JAQUAR Cat No.ALD-579 . (chrome) or other make specified in tender. |
| 35 | S&F in repair Soap Dish (Polycarbonate) complete as specified and as directed.( Make : jaquar) Cat No. AQN-7733 (chrome) or other make specified in tender. |
| 36 | S&F in repair Soap Dispenser with Glass Bottle all as specified ( Make : jaquar) Cat No. ACN-1135N (chrome) or other make specified in tender. |
| 37 | S&F in repair tumbler holder complete as specified and as directed.. Make : jaquar) Cat No. ACN-1141N (chrome) or other make specified in tender. |
| 38 | S&F in repair towel rack with lower hanger and hook 600mm long chromium plated complete as specified and as directed.(Make : Jaquar cat no- AQN-7781 ) (Chrome) or other make specified in tender. |
| 39 | S&F in repair Special designed glass shelf of size 600mm with CP wall flange all as directed by Engineer-in-Charge(Make :Jaquar cat no- AKP-35771P) or other make specified in tender. |
| 40 | S&F in repair corner glass shelf incl takingdown old one complete as specified and as directed.Make : Jaquar cat No CPA-1173 or other make specified in tender. |
| 41 | S&F in repair connector pipe 450mm long copper connection 15mm dia with nut and rubber brass coupling at both ends for basin and geyser all as directed by Engineer-in-Charge.(Make: Jaquar -ALD-803AB,ALD 805 AB) or other make specified in tender. |
| 42 | S&F in repair vitreous chine wash hand basin Table Top of size 565mm x 420mmx140mm (any selected colour) Product Range -(KUBIX) complete as specified and as directed Make :Jaquar Product code no- KUS-WHT-35935 or other make specified in tender. |
| 43 | S&F in repair vitreous china floor mounted rimless one piece closet (Pedestal pattern), white, including low level vitreous china valveless syphonic action type flushing cistern with inlet ball valve float, push button, flush pipe incl bracket, P/S trap, UF soft close seat cover and connecting fittings complete all as specified and directed.(Make : JAQUAR, Cat No: OPS-WHT-15853S300UF) or other make specified in tender. |
| 44 | S&F Shower panel of size not less than 1600 x 230 of shiny chrome finish adjustable body jets with functions like rain , casacade rain , body jets , chrome finished hand shower of 1.50 met flexible hose and Thermostatic mixer with diverter function for precise water temperature all as specified and as directed. (Make- Jaquar - SHP-SSF-ST8896 or other make specified in tender. |
| 45 | M & L for full body hardstone / vitrified in any colour (Matt / Polished) 10 mm thick (square / rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:4 etc complete all as specified and as directed by Engineer-in-charge. |
| 46 | M & L for Virified digital Ceramic tiles in any colour Double charged / ultracharged 10 mm thick (square / rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in walls etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in wall etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick screed bed in CM 1:3 etc complete all as specified and as directed by Engineer-in-charge. |
| 47 | S&F cupboard magnets heavey duty in cupboard etc complete all as specified and as directed. |
| 48 | Material and labour for in built wall mounted / floor mounted wooden with PU finish dressing table. Dressing table shall contain three shelf cabinet with glass profile door at right side of assembly and three wooden small shelf (PU Coated) at the left side of assembly. Centre of assembly will consist of LED light Mirror . The dressing table made of ISO 9001 : certified waterproof and termite proof 19 mm thick plywood and HDMR board ( 710 BWP grade) fixed with 4mm thick veneer and coated with PU paint both surfaces. Dressing table to be equipped with three modular drawer (tendem box) fixed with decorative handle and with locking arrangement , complete all as specified and as directed . ( Note : - Depth of dressing table shall not be less than 450 mm from wall) |
| 49 | Material and labour for in built wall mounted / floor mounted modern walk -in-wardrobe with attached dressing table . Wardrobe shall contain three shelf cabinet with 12 mm thick toughened glass profile door , sliding type with suitable channel , wardrobe and dressing table made of ISO 9001 : certified waterproof and termite proof 19 mm thick plywood ( 710 BWP grade) fixed with 4mm thick veneer and coated with PU paint both surfaces. Dressing table to be equipped with two modular drawer fixed with decorative handle and with locking arrangement complete all as specified and as directed . ( Note : - Depth of wardrobe and dressing table shall not be less than 600 mm from glass door) |
| 50 | S&F in repairs Cast iron soil, waste and vent pipes 100mm in any length with or without ears, with cement joints, laid in twall complete all as specified and as directed. |
| 51 | S&F for bends for 100mm pipe (any radious) diminishing piece or tapers (large bore measured) complete all as specified and as directed . |
| 52 | S&F in repair CI bends of 100mm dia with ducks foot or heel rest (ISI Marked) complete all as specified and as directed . |
| 53 | S&F in repair CI branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) or with parellel branches. For 100mm dia pipe complete all as specified and as directed |
| 54 | S&F in repair 100mm bore cast iron cowls complete all as specified and as directed |
| 55 | S&F 5.5 mm thick toughened frosted glass fixed in aluminium / Upvc beads (beading included with shutter ) or as in hinge door , partition , windows , automatic doors and similar work including cutting to shape , drilling holes as required complete all as specified and as directed, |
| 56 | M/L preparation of old decorated surface wall / ceiling by complete removal of existing treatment, washing, rubbing, stopping etc and applying two coat of oil emulsion distemper over a coat of alkali registant primer and one coat of wall putty (3mm thick) to match with the new suface on wall. complete all as specified and as directed by Engineer-in-charge. |
| 57 | S&F Supplying and laying of UPVC Pipes (SCH-40) 75 mm bore (internal dia) fittings on walls / ceiling or laying in floors complete all as specified complete all as specified and directed . |
| 58 | S&F Supplying and laying of UPVC (SWR) bends any radius complete all as specified and as directed. |
| 59 | Supply and fix uPVC floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed. |
| 60 | M&L Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.. |
| 61 | S&F for plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment of grade Fe-410- W(Gde- E-250) quality- B complete all as specified and directed |
| 62 | M&L Preparing new Steel or Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint over a coat of Red Oxide/ Zinc Chrome Primer, complete all as specified and as directed. |
| 63 | M&L Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 64 | M&L Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 65 | Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key and scrubbing down with water complete All as specified and as directed. |
| 66 | M & L for rendering 10 mm thick on brick wall or concrete surface in cement mortar (1:4) complete all as specified. |
| 67 | M&L preparation of new wall surfaces and applying two coat of plastic emulsion paint over a coat of primer and 3 mm thick wall care putty complete all as specified and as directed. |
| 68 | M&L for applying 2mm thick wall care putty (in two layers) on old cleaned / prepared surfaces of walls, soffits of chajja, roof slab etc, for smooth finish and finishing with two coats of weather proof exterior emulsion paint over a coat of suitable exterior primer of approved make using airless spray technology capable of operating single spray gun with hose of adequate length for upto 4 storey building height including necessary scaffolding, safety and protective measures complete all as specified and directed. |
| 69 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm and 2 mm thick wall care putty over new plastered surfaces using airless spray technology capable of operating single spray gun with hose of adequate length for upto 4 storey building height including necessary scaffolding, safety and protective measures complete all as specified and directed. |
| 70 | S&F S/S Grating square 150 mm size complete all as specified and as directed |
| 71 | Suppl and fixing UPVC junction double, (Single T), equal or unequal complete all as specified and as directed . |
| 72 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed . |
| 73 | Removing excavated material exc 250m but n exc. 500m and depositing where directed at a level n exc. 1.5 m above the starting point in any type of soil all as specified and directed. |
| 74 | Demolition of brick work built in cement mortar including all quions arches pillars etc but excluding ashlars facing,dressed stone work and precast concrete articles complete all as directed. |
| 75 | M&L for hardcore broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and directed. |
| 76 | M&L brick work with Fly ash bricks, straight or curved on plan exc 6m radius buit in CM 1:6 complete all as specified and as directed |
| 77 | M&L for Rendering 10 mm thick in CM (1:6) on fair face of brick work or concrete surfaces and finished the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.(upto 04 storey High of building) |
| 78 | M&L for 100 mm thick Cement concrete type B- 2, 1:2:4 (40mm graded aggregate) as in sub base of concrete finished even and smooth without using extra cement complete all as directed. |
| 79 | M&L for 75 mm thick PCC(1:4:8) type 'D-2' (using 40mm graded crushed stone aggregate) as in sub base of concrete finished even and smooth without using extra cement complete all as directed. |
| 80 | M&L anti - skid , full body, Vitrified tiles Matte finish ( any colour plain or highlight , Light / Dark shade ) 9 to 10 mm thick Size of tiles shall not be less than 600mm x 600mm , in floor / skirting / dado etc set and jointed in neat cement slurry including sides of tiles / junction of each tiles to be filled / grouted with coloured epoxy compound with spacer having width 4-6 mm thick and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:4 etc complete all as specified and as directed by Engineer-in-charge. |
| 81 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed. |
| 82 | M&L 25mm thick PCC 1:2:4 Type B-0 ( using 12.50 mm graded crushed stone aggregate) as in sub base of floor complete all as specified and as directed by Engineer-in-charge. (upto 04 storey High of building) |
| 83 | S&F 12 mm thick seamless PVC fluted louvers panels on roof any colour any design with GI structure / frame work , with L shape perimeter chanel, complete all as per manufactures instructions all as specified and as directed. |
| 84 | Providing and fixing factory made uPVC white colour sliding door, made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware, EPDM gasket, 1.2+ 0.2.mm thick galvanized steel profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, all completeand as directed, (Glazing, hardware and fitting, EPDM rubber gasket etc. to be paid separately.)Note:-Each member of door to be measured separately wrth clear length. |
| 85 | Sliding frame( 60mm x 62mm) |
| 86 | Sliding door Sash (85 mmx42mm) |
| 87 | Sliding glazing bead (24.5mmx16mm) |
| 88 | Reinforcement in frame (30mmx21.5mm) x 2 nos |
| 89 | Reinforcement sash (30 mmx28mm) |
| 90 | Providing and fixing zinc alloyed (white powder coated) touch lock for uPVC sliding door with necessary screws etc complete. |
| 91 | Providing and fixing steel roller for uPVC sliding door with necessary screws etc. complete. |
| 92 | Neoprene / EPDM rubber gasket |
| 93 | S & F MS angle,flats,etc independently fixed without connecting plates etc but ordinary length conforming to FE-410-W(Gde-E-250)quality A as in fencing posts including drilling holes for nuts and bolts and similar work complete all as specified and as directed. |
| 94 | M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing, Grauting with cement mortr(1:3), and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts (covered with stainless steel cap) complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. |
| 95 | S&F for 12 mm thick toughned glass as in partitions , railing , automatic doors, sliding door or hinge door and similar work including cutting to shape, drilling holes required complete all as specified and directed. |
| 96 | M&L for providing and fixing solid stainless steel (Grade 304) glass stand railing 8 inch long for supporting 12mm thick toughened glass incl base cap made of solid stainless steel including welding, grinding, buffing, polishing, Grauting with cement mortr(1:3) and fitting the same with necessary stainless steel nuts and bolts (covered with stainless steel cap) completeon the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. |
| 97 | E/M PORTION Taking down carefully old unsv copper/aluminium point wiring (light, fan, socket or power) complete,including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets,sunken type box etc.and removing materials to store for keeping in safe custody for reuse at site or for taking credit and making good to disturbed surfaces of walls, floors etc with its original specification complete all as specified and directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
| 98 | E/M PORTION Taking down carefully old unsv copper/aluminium point wiring (light, fan, socket or power) complete,including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets,sunken type box etc.and removing materials to store for keeping in safe custody for reuse at site or for taking credit and making good to disturbed surfaces of walls, floors etc with its original specification complete all as specified and directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysOct 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender