Tender For Special Repair Of Roof Treatment To Building No P-143 (Other Rank Line), P-144 (Other Rank Line),P-149 (Other Rank Mess), P-150 (Junior Commission Offers Mess), P-152 (Single Living Junior Commission Officers) Accomodation Of Headquarter S
Tender Value
72.80 Lakhs
Estimated cost
Bid Submission
03 Nov 2026
0 days left
EMD
1.34 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Patiala → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair Of Roof Treatment To Building No P-143 (Other Rank Line), P-144 (Other Rank Line),P-149 (Other Rank Mess), P-150 (Junior Commission Offers Mess), P-152 (Single Living Junior Commission Officers) Accomodation Of Headquarter Squadron 98 Armoured Brigade At Patiala Under Ge (N) Patiala.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 27-Oct-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 03-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling brick tiles or terracing tiles single layers on roofs complete all as specified and as directed by Engineer-in-Charge. |
| 2 | Demolition of mud phuska on roof any thickness including plastering and leeping (wheather full thickness removed or only part thereof) complete all as specified and as directed by Engineer-in-Charge. |
| 3 | Material and labour for roughening surfaces of old concrete floor/roof by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and as directed by Engineer-in-Charge. |
| 4 | Material and labour for Cutting grooves in brick wall, 75 mm wide and 65 mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed by Engineer-in-Charge. |
| 5 | Material & labour for cement concrete 1:3:6, type C-0 using 12.5mm graded stone aggregates as in padding over roof, minimum thickness at khurra, 25 mm and maintain a slope of 1:100 complete all as specified and as directed by Engineer-in-Charge. |
| 6 | Material and labour for laying APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid over and including bitumen primer applied @ 0.30 kg / sqm by forced application complete all as specified and as directed by Engineer-in-Charge. |
| 7 | Material and labour for cement concrete tiles with grey cement and no pigment, ISI marked, 25cm x 25cmx22 mm thick, machine pressed; set jointed and pointed in neat cement slurry laid over and including 15 mm thick cement mortar (1:3) bedding and joints grouted flush in cement mortar (1:3) mixed with integral liquid water proofing compound as per manufacturers instructions over roof surfaces complete all as specified and as directed by Engineer-in-Charge. Note: WPC will be measered and paid separately |
| 8 | Material and labour for cement concrete1:2:4, type B-0 using 12.5mm graded stone aggregates as in roof kerb, benching, mud stops, steps, coping and the like items slightly rounded or chamfered on the edges complete all as specified and as directed by Engineer-in-Charge. |
| 9 | Supply and fixing PVC(SWR) rain water pipes, 110 mm bore, single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed by Engineer-in-charge. |
| 10 | Supply and fixing PVC (SWR) bends of any radius for 110mm bore pipe complete all as specified and as directed by Engineer-in-charge. |
| 11 | Disconnecting existing tanks, exc 250 ltr but not exc 500 ltr capacity setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and as directed by bEngineer-in-chage. |
| 12 | Disconnecting existing tanks, exc 500 ltr but not exc 1000 ltr capacity setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and as directed by Engineer-in-charge. |
| 13 | Material and labour for Repair to RCC sunshades, Chajjas, Balconies, Columns, bands, beams and similar RCC work at any position/height by dismantling loose/disintegrated portion and dubbing out with Cement Concrete 1:1½:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished to required shape including provision of necessary supports if required and stitching of cracks with mild steel U clamps made out of 8mm dia @ 150mm c/c with inserting concrete block stretcher with cement mortar 1:3 mixed with adhesive chemical (Polymer based) and reinforced with PVC chicken mesh including form work where ever required and finished with10 mm thick plastering in CM 1:4 finished even and fair without using extra cement including preparation of surfaces to receive finishes complete all as specified and as directed by Engineer-in-charge. |
| 14 | Taking down cement plaster of any description, any thickness from brick walls, concrete surface including raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and as directed by Engineer-in-charge. |
| 15 | Material and labour for rendering15mm thick on fair or other than fair faces of brick work or concrete surfaces in cemet mortar 1:4 mixed with liquid water proofing compound as per manufacturer's instructions finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. Note : Liquid WPC will be measured and paid separately. |
| 16 | Supply only integral water proofing compound complete all as specified and as directed by Engineer-in-Charge. |
| 17 | Material and labour for rendering 10 mm thick on brick work or concrete surfaces in cemet mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 18 | Material and labour for rendering 5mm thick on brick work or concrete surfaces as in celing in cemet mortar 1:3 finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 19 | Complete removal of existing treatment of any type/ description from walls/ RCC surfaces etc with mechanical means/grinder etc complete all as directed by Engineer-in-Charge. |
| 20 | Complete removal of existing treatment of any type/description from ceilings/RCC surfaces etc with mechanical means/grinder etc complete all as directed by Engineer-in-Charge. |
| 21 | Material and labour for applying two or more coats of 100% Premium acrylic paint having VOC less than 50gm/litre and UV resistance as per IS 15489: 2004, alkali & fungal resistance, dirt resistance exterior paint of required shade ( Company Depot tinted) with silicon additives @1.43 litre/10 sqm over and including priming coat of exterior primer applied @0.90 litre/10 sqm over new surface complete all as specified and as directed by Engineer-in-Charge. |
| 22 | Material and labour for prepration of plastered surface of walls and applying two coats of oil bound distamper white or tinted over and including a coat of primer complete all as specified and as directed by Engineer-in-Charge. |
| 23 | Material and labour for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed by Engineer-in-Charge. |
| 24 | Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins,arches,pillars etc complete all as specified and as directed by Engineer-in-Charge. |
| 25 | Material and labour for brick work with sub class 'B' old size bricks straight or curved on plan exceeding 6m mean raidus bulit in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge. |
| 26 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as directed by Engineer-in-Charge. |
| 27 | Material and labour for Non-skid Ceramic coloured tiles 7-8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in cement mortar (1:4) complete all as specified and as directed by Engineer-in-Charge. |
| 28 | All as per Srl Item No 27 here-in-before but for work on vertical surface such as in skirting,dado laid over and including 10mm thick rendering in cement mortar 1:3 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engineer-in-Charge. |
| 29 | Material and labour for glazed ceramic coloured tiles 450x300x7mm thick laid on vertical surface such as in skirting,dado laid over and including 10mm thick rendering in cement mortar 1:3 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engineer-in-Charge.. |
| 30 | Material and labour for joint free Non-skid Ceramic coloured tiles 7-8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in cement mortar (1:4) complete all as specified and as directed by Engineer-in-Charge. |
| 31 | Demolition of stone slab and tiles of any description or thickness as in floors, apron etc laid, bedded and pointe in any mortar complete all as specified and as directed by Engineer-in-Charge. |
| 32 | Material and labour for machine cut Kota stone slab flooring 18-20 mm thick laid over and including 15 mm thick cement screed base in cement mortar 1:3 laid and jointed with grey cement slurry mixed with pigments to match the shade of the slab including rubbing and polishing to achieve mirror finish complete all as specified and as directed by Engineer-in-Charge. |
| 33 | Material and labour for machine cut kota stone slab18-20 mm thick as in riser of steps,skirting, dado and pillars, laid over and including 15 mm thick rendering in cement mortar (1:4) set and jointed in cement slurry and pointed in cement mixed with pigment to match the shade of slab including rubbing and polishing to achieve mirror finish complete all as specified and as directed by Engineer-in-Charge. |
| 34 | Material and labour for 18- 20mm thick granite (of any type) work (table rubbed and polished) in steps, Jambs, pillars, window cills, cooking platforms and like laid over and including 20 mm thick cement screed bed in cement mortar (1:3 jointed with cement mortar (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed by Engineer-in-Charge. |
| 35 | Material and labour for 15 to 18mm thick Baroda Green marble,machine cut as in shelves/steps/cills/jambs/skirting/border in flooring and the like etc,set and jointed in cement slurry laid over & including screed/rendering 15mm thick in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab including rubbing,cutting and mirror type granite polishing complete all as specified and as directed by Engineer-in-ChargeNote: Single piece front bull nose shall be used in steps/cills/jambs/shelves. |
| 36 | Taking down chowkhats or frames (without taking off shutters from the frame) n.exc 1.50 sqm including cutting holes of suitable size in brick work built in cement mortar for inserting new hold fast of frame and making good the disturbed surface to match with the existing surface complete all as specified directed by Engineer-in-charge. |
| 37 | Supply and fixing solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening complete all as specified and as directed by Engineer-in-charge. |
| 38 | Supply and fixing factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2 mm thick Moulded PVC Sheet on the front face & 2mm Plan colour PVC sheet on back face, supplying & fixing in frame at site as per specification complete all as specified and as directed by Engineer-in-charge.. |
| 39 | Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm including cutting holes of suitable size in brick work built in cement mortar for inserting new hold fast of frame and making good the disturbed surface to match with the existing surface complete all as specified and as directed by Engineer-in-charge. |
| 40 | Supply and fixing Pressed steel frames of size 125x60mm fabricated out of MS sheet 1.20 mm thick for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc,size 125x60mm complete all as specified and as directed by Engineer-in-charge. |
| 41 | Material and labour for preparation of new or previously untreated wood and wood based surfaces of any description,not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engineer-in-charge. |
| 42 | Material and labour for preparation of old painted wood and wood based surfaces of any description,not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed by Engineer-in-charge. |
| 43 | Material and labour for preparation of new or previously untreated steel and iron surfaces of any description, over 10 cm width or girth ,not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer-in-charge. |
| 44 | Material and labour for preparation of old painted steel and iron surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint complete all as specified and as directed by Engineer-in-charge. |
| 45 | Material and labour for Plain cement concrete (1:3:6) type C-0,using 12.5 mm graded crushed stone aggregate as in back filling of pressed steel frame, in hold fast blocks and similar work etc complete all as specified and as directed by Engineer-in-Charge. |
| 46 | Supply and fixing flush shutters 35mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed by Engineer-in-Charge. |
| 47 | Supply and fixing 35mm thick glazed and skelton shutters of 2nd class hard wood, open rebated prepare to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR Part-1 section 8 clause 8.24(a) supplied and fitted to chowkhats complete all as specified and as directed by Engineer-in-Charge. |
| 48 | supply and fixing Butt hinges 100 mm size, cast brass with mild steel butt hinge pin, bright polished and fixed, type B-11 complete all as specified and as directed by Engineer-in-Charge. |
| 49 | Supply and fixing aluminium handles125mm, cast type, anodised complete all as specified and as directed by Engineer-in-Charge. |
| 50 | Supply and fixing aluminium alloy, anodised, sliding door bolt 250 mm length with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy and fixed complete all as specified and as directed by Engineer-in-Charge. |
| 51 | supply and fixing aluminium anodised, barrel tower bolts of 200 mm size of extruded section and fixed complete all as specified and as directed by Engineer-in-Charge. |
| 52 | Supply and fixing door stopper over all length of cover plate 140 mm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring,fixed in floor complete all as specified and as directed by Engineer-in-Charge. |
| 53 | Supply and fixing Harrison rails 20mm dia bore mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and as directed by Engineer-in-Charge. |
| 54 | Supply and fixing Steel window box type using ERW hollow 'P' section comprising double frame for and including gauged and glazed Skelton shutter 30mm thick, jointed internally with flat iron 25x3mm complete including hinges, handle, tower bolts, stops, lugs, etc including 8mm square gaurd bars all as shown on drawing No TD-191 (R) sheet 1/4 to 4/4 complete all shown in drawing and as directed by Engineer-in-charge. |
| 55 | Supply and fixing Steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified and as directed by Engineer-in-charge |
| 56 | Supply and fixing 3 mm thick figured glass, pin head type and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and as directed by Engineer-in-Charge. |
| 57 | Supply and fixing Stainless steel wire cloth. 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed by Engineer-in-Charge. |
| 58 | Supply and fixing in repair vitreous china wash basin, white, flat back, size 550x400m including bracket and cutting for and pinning in ends of brackets or erecting stand, waste fittings of brass chromium plated for 32 mm bore waste pipe in cluding waste pipe complete all as specified and as directed by Engineer-in-Charge. |
| 59 | M& L for vitreous china squatting pan, Orissa pattern, size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe and anti-syphonage pipe etc complete including making good the disturbed floor to match with the existing floor complete all as specified and as directed by Engineer-in-Charge. |
| 60 | Material and labour for vitreous china wash down water closet pan (pedestal pattern) white (excluding fixing bolts, flushing cistern and flush pipe) including plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromiumm plated or aluminised hinging device complete all as specified and as directed by Engineer-in-Charge. |
| 61 | Supply and fixing in repair for vitreous China bowl urina flat back of size 465x355x265mm white ( minimum) with grating and unions for discharge pipe including providing & fixing plugs bedding urinal against wall in cement mortar 1:2,securing urinals to plugs with &including 60mm long brass screw ,pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe and waste pipe, complete all as specified and as directed by Engineer-in-Charge. |
| 62 | Supply and fixing in repair PVC valveless, syphonic action type, low level flushing cisteren 10 litres capacity , white with inlet, ball valve float and handle including brackets and 32 mm bore flushing pipe complete all as specified and as directed by Engineer-in-Charge. |
| 63 | Supply and fixing in repair 600 mm x 450 mm bevelled edge mirror of selected quality, mounted on 6 mm thick AC plain building board or commercial plywood and fixed to wall on wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed by Engineer-in-Charge. |
| 64 | Taking up or down GI tubing 15mm bore pipe and connection including cleaning for refixing or removal from site complete all as specified and as directed by Engineer-in-Charge. |
| 65 | Supplying and fixing mild steel tubing 15 mm bore , medium grade, galvanised, with all fittings fixed to walls and ceiling or laid in floors complete all as specified and as directed by Engineer-in-Charge. |
| 66 | Taking up or down GI tubing 20mm bore pipe and connection including cleaning for refixing or removal from site complete all as specified and as directed by Engineer-in-Charge. |
| 67 | Supplying and fixing mild steel tubing 25 mm bore , medium grade, galvanised, with all fittings fixed to walls and ceiling or laid in floors complete all as specified and as directed by Engineer-in-Charge. |
| 68 | Supply and fixing in repair brass chromium plated shower rose 125mm size with or without swivel joints, fixing to steel pipe or union including 15mm bore, 195mm long with bend of 45 degree mild steel shower arm complete all as specified and as directed by Engineer-in-Charge. |
| 69 | Supply and fixing in repair brass chomium plated towel rail 20 mm dia, D type, 60 cm long between flanges complete all as specified and as directed by Engineer-in-Charge. |
| 70 | Supply and fixing in repair Bib taps,cast copper alloy, fency type, long body with wall flange screwed for 15mm bore dia of iron pipe or for brass ferrule complete all as specified and as directed by Engineer-in-Charge. |
| 71 | Supply and fixing brass chromium plated wall mixer 2 in 1 system with provision with central spout and connection for over head shower with divertor liver ISI marked complete all as directed by Engineer-in-Charge. |
| 72 | Supply and fixing of Central Hole Basin Mixer with Regular Spout with Popup Waste System with 450mm Long Braided Hoses and fixed complete all as directed by Engineer-in-Charge. |
| 73 | Supply and fixing in repair Stop valves,cast copper alloy, fancy type, with long shank and cup ( concealed type ) screwed down,high pressure' with crutch or butter fly handle, screwed both ends for 15 mm bore dia iron pipe or for union complete all as specified and as directed by Engineer-in-Charge. |
| 74 | Supply and fixing in repair Angular Stop Cock with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore iron pipe or for union complete all as specified and as directed by Engineer-in-Charge. |
| 75 | Supply and fixing in repair stainless steel grating 150x150 mm size square shaped with cockroach trap for floor trap fixed in position complete all as specified and as directed by Engineer-in-Charge. |
| 76 | Supply and fixing in repair towel ring of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and as directed by Engineer-in-Charge. |
| 77 | Supply and fixing in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed by Engineer-in-Charge. |
| 78 | Dismantling water tanks of capacity exc 500 litres & n.exc 1000 litres and removing to store complete all as specified and as directed by Engineer-in-charge. |
| 79 | Supply and fixing tripple layered rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) white colour, 1000 Ltrs capacity hoisted and fixed in position including providing GI nipple/union of 25mm bore to connect GI tubing to PVC tank complete all as specified and as directed by Engineer-in-charge. |
| 80 | Supply and fixing Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe 25 mm bore dia and fixed (Minimum weight,20 mm-210gms/ 25 mm - 455 gms)complete all as specified and as directed by Engineer-in-charge. |
| 81 | Supply and fixing in repair Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for 25mm bore iron pipe complete all as specified and as directed by Engineer-in-charge. |
| 82 | Supply and fixing in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed by Engineer-in-charge. |
| 83 | Supply and fixing PVC connections 15mm size of length 450mm complete all as specified and as directed by Engineer-in-charge. |
| 84 | Dismantling of cast iron pipes 100 mm bore including fittings jointed with cement mortar and taking out of trenches if required complete all as directed by Engineer-in-charge. |
| 85 | Supply and fixing Cast iron (spun cast pipe) soil, waste and vent pipe 100mm bore,in any length, with or without ears, with cement joints,fixed to walls with and including stack clamps, nuts , bolts etc. and making necessary connections complete all as specified and as directed by Engineer-in-charge. |
| 86 | Material and labour for Cast iron (spun cast pipe) soil, waste and vent pipe 100mm bore,in any length, with or without ears, with cement joints,laid in trenches and making necessary connections complete all as specified and as directed by Engineer-in-charge. |
| 87 | Material and labour for Cast iron (spun cast pipe) soil, waste and vent pipe 75 mm bore,in any length, with or without ears, with cement joints,laid in trenches and making necessary connections complete all as specified and as directed by Engineer-in-charge. |
| 88 | Supply and fixing Cast iron (spun cast pipe) soil, waste and vent pipe 75mm bore,in any length, with or without ears, with cement joints,fixed to walls with and including stack clamps, nuts , bolts etc. and making necessary connections complete all as specified and as directed by Engineer-in-charge. |
| 89 | Supply and fixing for Cast Iron cowl for 100 mm bore pipe as in repair complete all as specified and as directed by Engineer-in-charge. |
| 90 | Supply and fixing Cast iron bends (any radius) with duck foot or heel rest for 75 mm bore pipecomplete all as specified and as directed by Engineer-in-charge. |
| 91 | Supply and fixing Cast iron bends (any radius) with duck foot or heel rest for 100 mm bore pipe complete all as specified and as directed by Engineer-in-charge. |
| 92 | Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed by Engineer-in-charge. |
| 93 | Material and labour for Cement concrete type C-2, 1:3:6 using 40 mm graded stone aggregate as in plinth protection 50 mm thick, surfaces finished even and smooth without using extra cement including provision of construction joints complete all as specified and as directed by Engineer-in-Charge. |
| 94 | Material and labour for 75mm thick cement concrete type C-2, 1:3:6 using 40mm graded stone agrregate as in sub flors, sub bases,floors and paving etc complete all as specified and as directed by Engineer-in-Charge. |
| 95 | Material and labour for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;complete all as specified and as directed by Engineer-in-Charge. |
| 96 | Material and labour for Chequered cement concrete tiles with grey cement and pigments. 20cm x 20cm x 25 mm thick , set, jointed and pointed in neat cement slurry in floor laid over and including 20 mm thick screed bed in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge. |
| 97 | Material and labour for providing, cement concrete type B1 1:2:4 (20mm graded stone aggregates) as in kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed by Engineer-in-Charge. |
| 98 | Material and labour for carrying out water proofing treatment of sunken floor complete all as specified as under:(i) The concrete/wall surface shall be cleared thoroughly of all laitance,loose particles,dust,grease etc and any friable and unsound area which shall be chipped,cleaned and thereafter pre-wetted to a satured surface dried condition. (ii) In case of pot holes/superficial cracks,the same shall be repaired with polymer modified mortar using URP as admixture @ 10% of cement content. (iii) The polymer modified mortar using URP as admixture @10% of cement content shall also be applied on vertical surfaces after removing of plaster upto 60 cm height.(iv) The surface thus prepared shall be coated by applying 2 coats of Dr Fixit Hydrochem super in the sunken areas and extending it upto 150 mm above the finished floor level.This includes layer of a 150 mm wide strip of an open woven glass fiber mesh over the PCC benching (Gole) on the 1st coat whille it is still wet.(v) Rendering 15 mm in CM 1:4 admixed with integral water proofing compound 1 W+ @ 200 ml per bag of cement complete all as specified and directed by the Engineer-in-Charge. |
| 99 | Material and labour for plain cement concrete type F-2,1:7:12 (using 40mm graded Brick aggregate) as in filling of sunken portion complete all as specified and as directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 27, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 03, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
TodayNov 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayNov 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender