Tender For Construction Work Of Miner Bridge 5X4.00X4.00 Box Culvert On Prachin Ghatiya Marg Near Ramkund Jail Road.
Tender Value
93.37 Lakhs
Estimated cost
Bid Submission
06 Oct 2026
4 days left
EMD
6.67 Lakhs
Bank guarantee accepted
Document Fee
4000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Aligarh → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Work Of Miner Bridge 5X4.00X4.00 Box Culvert On Prachin Ghatiya Marg Near Ramkund Jail Road.
BOQ
| Sl. No. | Item Description |
| 1 | Construction of embankment with approved material deposited at site from Roadway cutting & excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300.1 and 300.2 as per per Technical Specification Clause 301.5 (Diversion and Approach Road) |
| 2 | Supply & Laying of Hume pipe S & S Type in position with cement and sand mortar in 1:2 withsun including labour and T & P etc. required for proper completion of work as per direction of by the Engineer-in-charge (Labour rate only) N.P-3-Type (a) 1 (Diversion) |
| 3 | Construction of granular sub-base (grading-1) by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density complete as per technical specification Clause 401. |
| 4 | Dismantling of existing structures like culverts, bridges, retainingwalls and other structure comprising of masonry, cementconcrete, woodwork, steelwork, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202. (Culvert Work) |
| 5 | Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. (Culvert Work) |
| 6 | Sand filling in plinth including supply of necessary quantity of sand approved quarry from the site of work & including watering, dressing etc. Rate to include cost of all materials, labour and tools & plants etc. required for proper completion of the work. (Culvert Work) |
| 7 | Providing & Laying concrete for plain/reinforced concrete (M-15) in open foundations complete as per drawing and technical specifications clauses 802,803,1202 & 1203. (Culvert Work) |
| 8 | Plain/Reinforced cement concrete in open foundation complete as per drawing and technical specifications RCC Grade M20 using batching plant transit mixer & manual Placing. |
| 9 | Providing & Laying concrete for plain/reinforced cement concrete (M-25) in Sub-structure complete as per drawing and technical specifications clauses 802,803,1202 & 1203. (Culvert Work) |
| 10 | Supplying, fitting and placing HYSD bar reinforcement (Fe 415) in substructrue complete as per drawings and technical specification Clauses 1002,1005,1010 & 1202. (Culvert Work) |
| 11 | Providing pressure relief 100 mm dia PVC pipes.SOR No. Ch 01(xxxii) (Culvert Work) |
| 12 | Providing and laying of Filter media with granular crushed aggregates as per specification to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and Technical Specification Clause 1204.3.8 (Culvert Work) |
| 13 | Construction of sub-grade and earthen shoulders with approved material obtained from roadway cutting with a lifts upto 1.5 m & leads upto 100 m, spreading, grading to required slope and compacted to meet requirement of table No. 300.2 with lead up to 100 mtr as per technical specification class 303.1 including stablization with 2% stated lime including is mixing with rotavator complete two layar |
| 14 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with grader in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. |
| 15 | Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means. |
| 16 | Providing and applying tack coat with Bitumen VG-10 using bitumen distributor at the rate of 0.20 kg per sqm on the prepared granular surface treated with primer & cleaned with Air compressor as per Technical Specification Clause 503. |
| 17 | Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects.As per Morth Specification 505 sr. No. 5.04 (B) |
| 18 | Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects |
| 19 | Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing Lko SOR SI NO. 18(v) |
| 20 | Road Delinator Supply & Fixing of M S Delinator Made Of Mild Steel With Pure Polyster Powder Coating With The Minimum Thickness Of powder Coating Not Less Then 40 Micron for protection against corrosion the surface should be conceled so that their should not be any exposed surface without powder coating. As per Lucknow SOR SI No 1 Morth-805(8.15) |
| 21 | Providing and laying boulder apron on river bed/Canal bed for protection against Scour with stone boulder weighing not less than 40 kg each complete as per drawing and technical specification. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender