Tender For Modernization/Upgradation Of Existing Parks/Green Belts.Sub Head: Providing And Laying Of Irrigation Pipeline Network, Installation/Placement Of Water Storage Tanks, And Execution Of Other Miscellaneous Civil Works For The Eco-Restoration
Tender Value
57.12 Lakhs
Estimated cost
Bid Submission
06 Oct 2026
5 days left
EMD
1.14 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Modernization/Upgradation Of Existing Parks/Green Belts.Sub Head: Providing And Laying Of Irrigation Pipeline Network, Installation/Placement Of Water Storage Tanks, And Execution Of Other Miscellaneous Civil Works For The Eco-Restoration Programme Of South Central Ridge (Phase I) During 2026-27 At Sanjay Van Under The Territorial Jurisdiction Of Horticulture Division-Iv, Horticulture Zone, Dda.
BOQ
| Sl. No. | Item Description |
| 1 | Providing, laying, jointing and testing of HDPE water supply pipes for external works, PE-100 grade conforming to IS 4984:2016, PN-6, of approved make, including all required factory-fabricated/moulded HDPE fittings and specials, suitable for butt fusion/flange jointing; fittings rated PN-10 and above; including mechanical/manual trench excavation, protection, laying, heat/butt fusion jointing with necessary equipment and re-jointing, thrust blocks, LDPE/PVC fluorescent, backfilling in layers with watering and compaction, disposal of surplus earth, carriage, leads, lifts and all incidental works, complete as per approved drawings, CPWD specifications and directions of Engineer-in-Charge. (a) HDPE Pipe 90mm OD-PE100-PN6 |
| 2 | Providing, laying, jointing and testing of HDPE water supply pipes for external works, PE-100 grade conforming to IS 4984:2016, PN-6, of approved make, including all required factory-fabricated/moulded HDPE fittings and specials, suitable for butt fusion/flange jointing; fittings rated PN-10 and above; including mechanical/manual trench excavation, protection, laying, heat/butt fusion jointing with necessary equipment and re-jointing, thrust blocks, LDPE/PVC fluorescent warning tape, backfilling in layers with watering and compaction, disposal of surplus earth, carriage, leads, lifts and all incidental works, complete as per approved drawings, CPWD specifications and directions of Engineer-in-Charge. (a) HDPE Pipe 75 mm OD-PE100-PN6 |
| 3 | Providing, laying, jointing and testing of HDPE water supply pipes for external works, PE-100 grade conforming to IS 4984:2016, PN-6, of approved make, including all required factory-fabricated/moulded HDPE fittings and specials, suitable for butt fusion/flange jointing; fittings rated PN-10 and above; including mechanical/manual trench excavation, protection, laying, heat/butt fusion jointing with necessary equipment and re-jointing, thrust blocks, LDPE/PVC fluorescent warning tape, backfilling in layers with watering and compaction, disposal of surplus earth, carriage, leads, lifts and all incidental works, complete as per approved drawings, CPWD specifications and directions of Engineer-in-Charge. (a) HDPE Pipe 63 mm OD-PE100-PN6 |
| 4 | Providing, laying, jointing and testing of HDPE water supply pipes for external works, PE-100 grade conforming to IS 4984:2016, PN-6, of approved make, including all required factory-fabricated/moulded HDPE fittings and specials, suitable for butt fusion/flange jointing; fittings rated PN-10 and above; including mechanical/manual trench excavation, protection, laying, heat/butt fusion jointing with necessary equipment and re-jointing, thrust blocks, LDPE/PVC fluorescent warning tape, backfilling in layers with watering and compaction, disposal of surplus earth, carriage, leads, lifts and all incidental works, complete as per approved drawings, CPWD specifications and directions of Engineer-in-Charge. (a) HDPE Pipe 50 mm OD-PE100-PN6 |
| 5 | Providing & Fixing of 3/4\\" One piece Plastic QCV. It has auto close lid made of heavy duty rubber when QCV is not in use, one piece construction, having stainless steel spring, plastic valves. |
| 6 | Providing & Fixing of 3/4\\" plastic QCV Key with handle with 3/4\\" outlet. |
| 7 | Providing & Fixing of 3/4\\" plasstic QCV Key Brass swivel elbow. |
| 8 | Providing & Fixing of Service Saddle 90, 63, 50 mm X 3/4\\". |
| 9 | Providing & Fixing of 3.0\\" Hybrid plastic Wafer Type butterfly Valve for isolation. The Butterfly valve should be as per manufacturing standard IS: 13095. It shall be with integral synthetic rubber lining. Body made of high quality PVC for streanth and chemical resistance, disc, Allen screw, lock plate Knurling pin made of stainless steel SS-304. It shall be lever operated quarter turn and offers bi-directional smooth operation. The hydraulic body test pressure of the Hybrid plastic buffer type Butterfly Valve is 15 bar and hydraulic seat test pressure of the product is 10 bar at temperature range 5° C to 50° C |
| 10 | Providing & Fixing of 2.5'' Hybrid plastic Wafer Type butterfly Valve for isolation. The Butterfly valve should be as per manufacturing standard IS: 13095. It shall be with integral synthetic rubber lining. Body made of high quality PVC for streanth and chemical resistance, disc, Allen screw, lock plate Knurling pin made of stainless steel SS-304. It shall be lever operated quarter turn and offers bi-directional smooth operation. The hydraulic body test pressure of the Hybrid plastic buffer type Butterfly Valve is 15 bar and hydraulic seat test pressure of the product is 10 bar at temperature range 5° C to 50° C |
| 11 | Providing & Fixing of 2.0\\" Hybrid plastic Wafer Type butterfly Valve for isolation. The Butterfly valve should be as per manufacturing standard IS: 13095. It shall be with integral synthetic rubber lining. Body made of high quality PVC for streanth and chemical resistance, disc, Allen screw, lock plate Knurling pin made of stainless steel SS-304. It shall be lever operated quarter turn and offers bi-directional smooth operation. The hydraulic body test pressure of the Hybrid plastic buffer type Butterfly Valve is 15 bar and hydraulic seat test pressure of the product is 10 bar at temperature range 5° C to 50° C |
| 12 | Providing and fixing 3.0\\" heavy-duty PVC/uPVC Ball Valve, full-bore type, suitable for irrigation and water supply applications, manufactured from high-quality UV-stabilized PVC/uPVC material, complete with PVC/uPVC ball, suitable sealing arrangement, heavy-duty lever handle and socket/solvent-weld end connections, having a minimum working pressure rating of 10 kg/cm² (10 bar), including all necessary jointing materials, fittings, installation, alignment, leakage testing and commissioning, complete in all respects as directed by the Engineer-in-Charge. |
| 13 | Providing and fixing 2.5\\" heavy-duty PVC/uPVC Ball Valve, full-bore type, suitable for irrigation and water supply applications, manufactured from high-quality UV-stabilized PVC/uPVC material, complete with PVC/uPVC ball, suitable sealing arrangement, heavy-duty lever handle and socket/solvent-weld end connections, having a minimum working pressure rating of 10 kg/cm² (10 bar), including all necessary jointing materials, fittings, installation, alignment, leakage testing and commissioning, complete in all respects as directed by the Engineer-in-Charge. |
| 14 | Providing and fixing 2\\" heavy-duty PVC/uPVC Ball Valve, full-bore type, suitable for irrigation and water supply applications, manufactured from high-quality UV-stabilized PVC/uPVC material, complete with PVC/uPVC ball, suitable sealing arrangement, heavy-duty lever handle and socket/solvent-weld end connections, having a minimum working pressure rating of 10 kg/cm² (10 bar), including all necessary jointing materials, fittings, installation, alignment, leakage testing and commissioning, complete in all respects as directed by the Engineer-in-Charge. |
| 15 | Providing & Fixing of Valve box 20\\" Rectangular Valve Box with cover. The valve boxes shall be high strength, high density polyethylene constructed material. It should be UV stabilizer with anti oxidants, resistant to moisture. |
| 16 | Providing & Fixing of Valve box 6\\" Round Valve Box with cover. The valve boxes shall be high strength, high density polyethylene constructed material. It should be UV stabilizer with anti oxidants, resistant to moisture. |
| 17 | Providing & Fixing of 3 way pilot operated Quick Pressure relief valve size 2\\" along with bypass arrangement. It shall be adjustable Pressure setting from 21 PSI - 130 PSI for maximize performance. It has 3 way pilot with 4 ports of the size 1/8\\"-28 BSP at a tempreture of 60° C. It should be made of high streangth engineering plastic with great durability and corrosion resistance. Its pilot has glass reinforced plastic base and cap for streangth, Pilot has a max height of 155 mm and width of 69 mm.. |
| 18 | Providing & Fixing of a double acting Continuous Air release & Vacuum Relief valve 2\\" made of Aluminum. The Continuous Air release valve shall be capable of both releasing and admitting air from and into the line during system operation. The minimum sealing pressure of the valve is 7 PSI while working pressure shall be 7-150 PSI. The valve height should be 266, width 135 mm and weight should be 2640 gm. |
| 19 | Providing & Fixing of 3/4\\" BSP/NPT male threaded inlet connection sprinkler with trajectory angle 23° . Brass range/spray nozzle of size 4.36x3.17 ensure dia of coverage 26.5 meter at discharge rate of 2051 LPH at 3.0 bar. Sprinkler has a superior quality washers and other parts ensure for efficient performance. mody of construction of sprinkler will be engineering plastic with brass nozzle. |
| 20 | Providing plumber/fitter including necessary T&P etc. complete,as per the direction of Engineer-in-charge. |
| 21 | Providing and placing on platform polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 22 | Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 23 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. (a) All kinds of soil |
| 24 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :(a) 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 25 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :(a) 1:1.5:3 (1 cement : 1.5 coarse sand (zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 26 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.(a)Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 27 | Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil, as directed within a lead of 50 m and lift upto 1.5 m: (a) All kinds of soil |
| 28 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :(i) 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 29 | Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-in-charge.(Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment).(a) Overhead informatory road signage |
| 30 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer , Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work using structural steel etc. all complete as per direction of Eingineer-in charge. |
| 31 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work |
| 32 | Modified estimate after GST correction factor of 0.973(excluding item no. from 1 to 20 (being M/R based items) |
| 33 | Add Cost Index @ 4.03%(excluding item no. from 1 to 20 (being M/R based items) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysOct 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender