Tender For Special Repairs To Semi-Permanent Jetty No.2 With Approach Road Including Supply Of Welder And Helper With Operation Maintenance At Mouza: Kashtala (Near Kachuberia Point) Along River Right Bank Of Muriganga In P.S.- Sagar, Under Kakdwip I
Tender Value
59.47 Lakhs
Estimated cost
Bid Submission
13 Oct 2026
10 days left
EMD
1.18 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
24 Paraganas North → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Semi-Permanent Jetty No.2 With Approach Road Including Supply Of Welder And Helper With Operation Maintenance At Mouza: Kashtala (Near Kachuberia Point) Along River Right Bank Of Muriganga In P.S.- Sagar, Under Kakdwip Irrigation Division In Connection With Ganga Sagar Mela - 2027.
BOQ
| Sl. No. | Item Description |
| 1 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 2 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 3 | Welding by gas or electric plant including transportation of plant at site etc. complete. |
| 4 | Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade : Two or more coats on new work |
| 5 | Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :One or more coats on old work |
| 6 | Painting with synthetic enamel paint of approved brand and manufactureof required colour to give an even shade :One or more coats on old work |
| 7 | Applying priming coat:With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works |
| 8 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge:All kinds of soil |
| 9 | Brick edging in full brick width and half brick depth including excavation, refilling and disposal of surplus earth lead upto 50 metres. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 10 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. Foundation, Footing, Bases of Column etc, for mass concrete. |
| 11 | CARRIAGE OF MATERIALSa) Loading and Unloading of bricks/stone sets i) Bricks |
| 12 | Loading and Unloading of Cement and lime in bags, tar or bitumen, Steel materials, timbers and similar material Manual Means and Stacking.Steel |
| 13 | Carriage for bricks.(i)Surfaced Road |
| 14 | Carriage for cement/lime (in bags),tar or bitumen, Steel materials, timber and similar materials.(i)Surfaced Road |
| 15 | Labour for hoisting and placing in proper position (up to 1st floor level) departmental R.S. joists, channels, angles. Tees, plates etc. including fitting and fixing same with bolts and nuts, if necessary (but excluding cost of such bolts and nuts) for Sagar Island. |
| 16 | Supplying Jhaw / Eucalyptus bullah piles at work site, including dressing and making one end pointed.a)15.00 cm.av.Dia Note: Diameter of pile to be measured at a distance of 1.5m from the thicker end. |
| 17 | Labour for driving Jhaw / Eucalyptus bullah piles by monkey in all sorts of soil including hoisting and placing piles in position, protecting the pile head with iron ring and cutting and shaping heads before and after driving and including hire and labour for necessary driving appliances and all tackles.a)15.00 cm.av.Dia Note:1) Payment to be made on the length driven into the ground. Diameter to be measured at 1.5m. from the thicker end. |
| 18 | Supplying, fitting and fixing with iron nails half split bullah wailing pieces and cross pieces etc. complete with cost of all materials and carriage to site.(a) Width of thinner end above 10 cm. and less than 15 cm. (i) Jhaw / Eucalyptus. |
| 19 | Coal tarring with 5% pitch including cost of material and labour complete as per direction of the Engineer-in-chargea) Two Coat |
| 20 | Supplying, dressing and stacking at site bamboo pins above 5 cm. diameter and upto 7.5 cm. diameter. (Dia. to be measured at mid length). |
| 21 | Driving bamboo pins in standing or flowing water including scaffolding and driving appliances.(a) Where boats are not necessary. |
| 22 | Supplying, fitting and fixing with iron nails half split bamboo wailing pieces (av. dia. of bamboo not less than 5.0 cm.) |
| 23 | Supplying to site empty cement polythene bags (capacity 50kg) in good condition including stacking, incedental charges etc. all complete (capacity 50 kg). |
| 24 | Labour charges for filling empty cement gunny bag / polythene bag (capacity 50 kg) with all kinds of earth (wet or dry), sand or agreegates(stone / brick) and sewing as done in case of cement bags ,( tying with a knot after filling will not be accepted ) , and stacking within a lead of 30 metre as per direction of Engr-in-charge (cost is excluding the cost of any types of filling materials).NB:- Volume of earth/ sand filled bags should not be less than 0.028cum/ bag. |
| 25 | Extra rate for litem No.24 for each additional lead of 60 metere or part thereof over the linitial lead of 30metre. a) Two Extra lead |
| 26 | Dumping in position earth / sand filled gunny / poly bags (capacity 50 kg) within a lead of 30 metre inclusive of all lifts. |
| 27 | Best Seasoned wood work in shutters, posts, plates, rafters, battens, trusses, beams, purlins, bargas, wheel-guards, running boards, frames etc. including supplying at site, handling, hoisting, fitting & fixing in position excluding the cost of bolt and nuts only but including the cost of nails and screws with cost and carriage of all materials complete as per the direction of the Engineer-in-charge. (The quantum should be corrected upto 3 decimels) (a) Sal wood |
| 28 | Labour charges for old or new wood work including hoisting, fitting & fixing including supplying new nails and screws wherever necessary etc. complete as per the direction of the Engineer-in-charge. (The quantum should be corrected upto 3 decimels) |
| 29 | Installationof M.S steel Gangway including repairing and replacement of steel members.if necessary (excluding the cost of steel members) drilling, necessary holes, wealding (renewing of fresh12 mm) tightenning with bolts and nuts, if requred, supply of HYFG bolts of G.K.W made of requredsize with necessary washers (tightening to be cheacked with calibrated taught wrench) cleats, stiffeners,gusset plates including hoisting, erecting, fitting, fixing and assembling the Gangway with all labours,and materials etc. Complete with cost of red lead painting of approved brand after cleaning the surfaceproperly, placing the gangway properly to pontoon and fixed to yoke including fitting the yoke withall accessories with all scaffolding and providing all such facilities to execute and complete the workas per direction of Engineer-in-Charge for Sagar Island |
| 30 | Labour Charge for lifting and dismainting gangway & accessaries including removing bolts and nuts without damaging the same including lubricating the same for preservation to godown including cutting welding without carriage the steel members with neccessary scaffolding and machineries for lifting the gangway the all including chargs as per direction of the Engineer in Charge for Sagar Island |
| 31 | Labour charges for taking out old wood work including cutting bolts and nuts and stacking within a lead of 100 metre etc. complete as per the direction of the Engineer-in-charge. (The quantum should be corrected upto 3 decimels) |
| 32 | Supply of Silver Sand, of different working site within main land under the jurisdiction of Eastern Circle, I & W Directorate |
| 33 | Supplying to site and pitching with 1st class kiln burnt or picked Jhama bricks including dressing, ramming and preparing bed to proper slope complete with necessary earth work not exceeding 300 mm. in depth and filling gaps with powdered earth or local sand etc. complete (The rate is including cost of sand).i) With 1st class kiln burnt brick a) 20 cm thick |
| 34 | Labour charges for relaying and replacing the displaced dry brick pitching by old bricks including dressing and preparing bed with necessary earth work upto 30 cm depth complete including filling gaps with powdered earth or local sand, including collection of bricks within a lead of 50 metre and finishing the same as per direction of the Engineer- in - Charge. a) 20.00 cm thick |
| 35 | Earthwork in excavation in all kinds of soil for making embankments, repairs to the embankment, closing breaches etc. as per profile including supply and transporting the earth by truck or tractor or any other mechanical means on land, including loading, transporting, unloading and stacking with all lifts bothways and head load where necessary and depositing the same on embankments, channels, filling depressions in requisite profile, levelling as per direction of the Engineer-in-charge within a lead of E) Beyond 4.00 Km and upto 5.00 KmNB: Measurement to be taken on the basis of stack measurement / pre-post work section measurement after deduction of void as per norms. No extra payment will be made for stacking.Note 1: Extra rate towards compensation for earth for land owned / arranged by the contractor over rate of earthwork for land owned / arranged by the Department has been added in this derivation @ ₹43.00/m³ [Vide Ref: Page No: 87, Item No: 16(Note) of NH Schedule of Rates 2019]Note 2: The rate of royalty for earth/soil/fine sand/silt used for filling/brick making ( including such materials derived from dredging/de-silting) as notified same as that of Ordinary Earth/Brick Earth/fuller Earth vide Gazette notification No. 581-ICE-12013(99)/6/2022-MINES SEC-Dept. of ICE, Date:- 26.09.2022 of Department of Industry, Commerce & Enterprises Mines Branch @ ₹29.00/m³ has been added in this derivation. The royalty will be paid to the agency on production of necessary documents in support of paymentmade towards the royalty.Note 3: Extra rate towards cess for earth for land owned / arranged by the contractor over rate of earthwork for land owned / arranged by the Department has been added in this derivation @ ₹5.30/m³ [Vide Ref: Memo No: 138/3512-29/C/99 Dated; 22.06.2000 of DLR & Jt. LRC, WB] |
| 36 | Labour for taking out brick-on-edge of herring bone bond including removing debris to flank or berm sorting out serviceable materials and stacking for Sagar IslandA) Bricks on Herring bone pattern. |
| 37 | Labour for taking out old soling edging including emoving debris for Sagar Island(a) Single flat soling |
| 38 | Labour for taking out brick-on-end edging including removing debris to flank or berm sorting out serviceable materials and stacking for Sagar Island |
| 39 | Supply on hire charges basis for standing welding generator set(one no) Gas cutting arrangements with other necessaries ........of all materials to site for Sagar Island |
| 40 | RATE OF WAGES FOR DIFFERENT CATEGORY OF WORKERS (i) Welder |
| 41 | RATE OF WAGES FOR DIFFERENT CATEGORY OF WORKERS. (i) Helper for welder |
| 42 | RATE OF WAGES FOR DIFFERENT CATEGORY OF WORKERS. (i) Day Mazdoor (Male/Female) |
| 43 | RATE OF WAGES FOR DIFFERENT CATEGORY OF WORKERS. (i) Mazdoor (For Night Work ) |
| 44 | RATE OF WAGES FOR DIFFERENT CATEGORY OF WORKERS. (i) Fitter |
| 45 | RATE OF WAGES FOR DIFFERENT CATEGORY OF WORKERS. (i) Helper for Fitter |
| 46 | RATE OF WAGES FOR DIFFERENT CATEGORY OF WORKERS. (i) Ordinary Carpenter |
| 47 | RATE OF WAGES FOR DIFFERENT CATEGORY OF WORKERS. (i) Helper for Carpenter |
| 48 | RATE OF WAGES FOR DIFFERENT CATEGORY OF WORKERS. (i) Mathor Mazdoor/ Tarmar Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysOct 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender