Tender For Renovation Of Room No. 009 And Ladies Rest Room At The Ground Floor Of Tannery Building, Csir-Clri, Adyar, Chennai - 600020
Tender Value
28.51 Lakhs
Estimated cost
Bid Submission
20 Oct 2026
19 days left
EMD
57025
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chennai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Room No. 009 And Ladies Rest Room At The Ground Floor Of Tannery Building, Csir-Clri, Adyar, Chennai - 600020
BOQ
| Sl. No. | Item Description |
| 1 | Civil Part |
| 2 | CEMENT CONCRETE (CAST IN SITU)Providing and laying in position excluding cement concrete of level: specified grade the cost of centering and shuttering - All work up to plinth1:2:4 (1 Cement : 2 coarse sand (zone-Ill) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 3 | REINFORCED CEMENT CONCRETE Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 4 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform |
| 5 | Edges of slabs and breaks in floors and walls Under 20 cm wide |
| 6 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 7 | MASONRY WORK Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6(1 cement : 6 coarse sand) |
| 8 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:4(1 cement :4 coarse sand) |
| 9 | CLADDING WORK Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels.Granite stone slab of colour black, Cherry/Ruby red with galaxy finishArea of slab over 0.50 sqm |
| 10 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. |
| 11 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3(1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete and PVC corner beeding complete make: Kajaria or equivalent. |
| 12 | WOOD AND P. V. C. WORK Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding |
| 13 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. |
| 14 | Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles of approved quality with necessary screws etc. complete. |
| 15 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. |
| 16 | Providing and fixing chromium plated brass handles with necessary screws etc. complete: 125 mm |
| 17 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :300x16 mm |
| 18 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :300x10 mm |
| 19 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :150x10 mm |
| 20 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper |
| 21 | Providing and fixing factory made uPVC glazed/wire mesh windows/ doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and lnline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod (rate including sealent)of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Make: Qute/duroplast or equivalent.Fixed window/ ventilator without mullion /transom with pin headed louver glass. Using R2 series with frame (39 mm & above) x (39 mm & above). (Height upto 1.2 metre) |
| 22 | Casement window single panel with S.S. 304 friction hinges as per size and weight of sash, multi-point locking system, zinc alloy (zamak) powder coated handles. Using R3 series with frame (55 mm & above) x (45 mm & above) & sash (55 mm & above) x (65 mm & above). (Height upto 1.8 metre) |
| 23 | Casement door double panel with French (False) Mullion with zinc alloy (zamak) 3D hinges, multi-point locking system with cylinder, zinc alloy (zamak) powder coated handles on both sides. Using R4 series with frame (64 mm & above) x (55 mm & above) & sash (64 mm & above) x (100 mm & above) & French (False) mullion (64 mm & above) x (60 mm & above). (Height above 2.5 metre) as per approved colour/ shade by engineer in-charge. |
| 24 | Providing and fixing stainless steel fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in-charge. 200 mm |
| 25 | STEEL WORK Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 26 | FLOORING Providing and laying Ceramic glazed floor tiles of size 300x300 mm/100x100/150x100mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including ceramic saucer drain pointing the joints with white cement and matching pigments etc., complete .Make: Kajaria or equivalent. |
| 27 | Providing and laying Vitrified tiles in floor in diferent sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily Make: Kajaria or equivalent. Double charge vitrified tile polished finish of size Size of Tile 600 x 600 mm |
| 28 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size of Tile 600x600 mm |
| 29 | ROOFING Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 30 | Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc coating 120 gram per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Flashings/ Aprons.( Upto 600 mm) |
| 31 | FINISHING 20 mm cement plaster of mix: 1:4(1 cement: 4 fine sand) |
| 32 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.Two coats |
| 33 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture Make: Asian royale shine or equivalent. |
| 34 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats |
| 35 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre. Two coats |
| 36 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 37 | REPAIRS TO BUILDING Repair to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge. |
| 38 | Dismantling W.C. Pan/wash basin/sink/flush tank of all sizes including disposal of dismantled materials including malba all complete as per directions of Engineer-in-Charge. |
| 39 | Dismantling and Demolishing Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:4:8 or leaner mix (including equivalent design mix) |
| 40 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 41 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar |
| 42 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area 3 sq. metres and below |
| 43 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area beyond 3 sq. metres |
| 44 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm |
| 45 | Dismantling old plaster or skirting/wall tiles raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 46 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved ( Taking out from CLRI campus with risk and cost of the contractor). |
| 47 | SANITARY INSTALLATIONS Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 48 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid |
| 49 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps |
| 50 | Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40 mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Size 600x450x250 mm |
| 51 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32 mm dia |
| 52 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 40 mm dia |
| 53 | Providing and fixing 100 mm sand cast Iron grating for gully trap. |
| 54 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm |
| 55 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
| 56 | Providing and fixing toilet paper holder : C.P. brass |
| 57 | WATER SUPPLY Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall25 mm nominal dia Pipes |
| 58 | WATER SUPPLY Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 40 mm nominal dia Pipes |
| 59 | WATER SUPPLY Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 50 mm nominal dia Pipes |
| 60 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia Pipes |
| 61 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore |
| 62 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : Make : ZOLOTO or equivalent. 25 mm nominal bore |
| 63 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : Make : ZOLOTO or equivalent. 40 mm nominal bore |
| 64 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : Make : ZOLOTO or equivalent. 50 mm nominal bore |
| 65 | Providing and fixing uplasticised PVC connection pipe with brass unions :45 cm length 15 mm nominal bore |
| 66 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : Make: Jaguar or equivalent 15 mm nominal bore |
| 67 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.Make: Jaguar or equivalent 15 mm nominal bore |
| 68 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 Make: Jaguar or equivalent. 15 mm nominal bore |
| 69 | Providing and fixing PTMT grating of approved quality and colour. Circular type 100 mm nominal dia |
| 70 | Providing and fixing PTMT grating of approved quality and colour. Circular type 125 mm nominal dia with 25 mm waste hole |
| 71 | Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. |
| 72 | Making hole up to 20x20 cm and embedding pipes up to 150 mm diameter in masonry and filling with cement concrete 1:3:6 (1 cement : 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) including disposal of malba. |
| 73 | DRAINAGE Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:150 x 100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 74 | Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : For pipes 100 to 250 mm diameter |
| 75 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 76 | ALUMINIUM WORK Providing and fixing glazing in aluminium/Upvc door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) |
| 77 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. . Note: For WPC solid door/window frames, minus 5 mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Make: Qute /duroplast or equivalent Frame size 65 x 100 mm |
| 78 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, SS Hinges all as per direction of Engineer-In- Charge. Make: Qute /duroplast or equivalent. 30 mm thick |
| 79 | Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment .Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement: 2 Coarse sand) to match the existing floor: Anti-Termite Treatment- Post ConstructionOperation Details(i) Drilling at every one foot interval at wall and floor junction.(ii) Drill depth 4-5 inches on both sides.(iii) chemical used- Imidachloprid 30.5 S.C.[Bayer India or equivalent](iv) Chemical injection done very half an hour up to saturation point(min 4-5 times).(v) Complete electrical conduits /junction boxes chemical treatment.[oil based](vi) Plugging of holes after chemical injuction.(vii) On completion of work a warranty for a period 5 years is given for the site.(viii) Dliute and injecting Chemical emulision for POST CONSTRUCTIONAL anti-termite treatment(Including the cost of chemical emulsion) (ix) Treatment of existing mansory using chemical emulsion @ one litre per hole at 300mm interval them with cement motar 1:2 (1 cement: 2 coarse sand ) to the full depth of the hole with Imidachlopride chemical. |
| 80 | Providing and fixing CP liquid soap container approved design with bracket of the same materials with snap fittings of approved quality and colour as approved by Engineer in-Charge.Make:Jaguar or equivalent as approved by Engineering in-cherge. |
| 81 | Providing and fixing PVC floor Trap of Make: \\"Supreme\\" Size:- 110mm, Socket Type:- \\"S\\", Length:- 278mm, Depth of outlet:- 110mm & Height of Trap-118mm with necessary concrete bedding in floors with necessary cutting, placing, etc., complete all as required and directed by the Engineer-In-Charge. |
| 82 | Supplying and fixing Health facet of approved design including with Angle cock and required CP fittings as per direction of Enginner-in-Charge.Make: Jaguar or equivalent. |
| 83 | Providing and fixing uPVC- SWR (sewage waste & Rain water) pipes for sewer lines - Type:B of \ISI : 13592 of approved make and quality with all necessary specials such as collars, elbows, shoe,bends, tees, doors Y's cowl cap, G.I coated special clamps at the interval of 1m etc., using jointing ring with solutions for necessary scaffolding etc., complete with all lead lift and as directed by the Engineer-in-Charge. 110mm dia. |
| 84 | Providing and Fixing uPVC - SWR (sewage waste & Rain water) pipes for sewer lines - Type :B of ISI: 13592 of approved make and quality with all necessary specials such as collars, elbows, tees, doors Y's, door T`s ,cowl cap, G.I coated special clamps at the interval of 1m etc., using joining ring with solutions for necessary scaffolding etc., complete with all lead and lift as directed by the Engineer-in-charge.75mm dia. |
| 85 | Dismantling Existing pipes of any diameter inlet and outlet pipes for GI/Pvc/SWR all complete as per direction of site incharge (external work)including removal of clamps , making holes, fittings etc.,complete taking out the pipes of any diameter of size, manually/ by mechanical means including stacking of pipes in departmental stores as per direction of Engineer-in-charge |
| 86 | Providing and fixing C.P towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. Make: Jaquar or equivalent |
| 87 | Supply and fixing of cupboard made of QPLAST upvc chambered Hollow Profile which is termite proof,Water resistant and avoid expansion and contraction during Climate change .The Panel will be factory printed with design on both sides.The profile will be of single panel upvc profile with size 635mm x 20mm & wall thickness of 1mm. All 4 sides will be covered by clip section of size 19mm in all 4 sides at wherever required. The cupboard shutter shall be reinforced by 16mm x 16mm super Q Rod and 16mm x 18mm x 200mm Bar Rod at Positions wherever required for facilitating Screw holding Capacity and weight holding purpose. The shutter will be fixed with soft close hinges to prevent doors from slam shutting,by allowing them to close gently and quietly, suaitable locks, SS handles, T-bolt which helps to avoid damage and extends the lifespan of the door. (Rate including all required SS accessories)Cupboard shutter , rack with frame : Make: Qute/Duroplast or equivalent |
| 88 | Electrical Part |
| 89 | MODULAR LIGHT/FAN PT: Wiring for light / fan / exhaust fan / call bell point with 1.5sqmm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable size GI. box and earthing the point with 1.5sqmm. FRLS PVC insulated copper conductor single core cable etc., as required. |
| 90 | CIRCUIT WIRING : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 91 | CIRCUIT WIRING : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 92 | CIRCUIT WIRING : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 93 | CIRCUIT WIRING : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required2 X 6 sq. mm + 1 X 6 sq. mm earth wire |
| 94 | CIRCUIT WIRING : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required4 X 4 sq. mm + 2 X 4 sq. mm earth wire |
| 95 | MODULAR 15A SWITCH : Supplying and fixing following modular switch on the existing modular plate & switch box including connections but modular plate etc. as required.15/16 amp switch |
| 96 | MODULAR 15A SOCKET : Supplying and fixing following modular socket on the existing modular plate & switch box including connections but modular plate etc. as required.6 pin 5/16 amp socket outlet |
| 97 | GI Box alongwith modular base & cover plate : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches & sockets and junction box in recess etc as required. 6 Module (200mm x 75mm ) |
| 98 | GI Box alongwith modular base & cover plate : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches & sockets and junction box in recess etc as required. 12 Module (200mm x 150mm ) |
| 99 | Ceiling Fan 1200mm: Supply, Installation, Testing and Commissioning of 1200mm sweep, BEE 5 star rated, Ceiling fan with Brush Less Direct Current(BLDC) Motor, Class of Insulation : B, 3 No's of blades, 30 cm to 50cm long suitable size down rod, 2No's canopies, shackle kit, safety rope, copper winding, Power factor not less than 0.9, service value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min,350 RPM (tolerence as per Is:374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 deg C(max),insulation resistance morethan 2Mega ohm, suitable for 230V,50Hz, single phase AC supply, earthing etc complete as required. |
| 100 | FIXING OF DOWNROD IN TWIN LED TUBE LIGHT: Installation, testing and commissioning of prewired, Twin LED of all types, complete with all accessories etc.,including supplying and fixing ball and socket arrangement, 2no's.down rods of 20mm dia x 1.6mm thick steel conduit upto 30cm length, painting and wiring the down rods and connections with 1.5sqmm FRLS PVC insulated, copper conductor, single core cable and earthing etc.as required. |
| 101 | THREE PHASE DB : Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . 8 way (8+24), Double door |
| 102 | THREE PHASE DB : Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . 4 way (8+12), Double door |
| 103 | MCB:Supplying and fixing 16 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole |
| 104 | MCB:Supplying and fixing 16 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Triple pole |
| 105 | CABLE END BOX: Supplying and fixing Cable End Box (Loose Wire Box)suitable for triple pole and neutral, sheet steel, Vertical MCB distribution board, 415 Volts, on surface/ recess, complete with testing andcommissioning etc. as required.For 8 way,Double door VTPN MCB DB |
| 106 | CABLE END TERMINATION: Supplying and making end termination with brass compression gland and Aluminium/copper lugs for following size of PVC insulated and PVC sheathed / XLPE Aluminium/copper conductor cable of 1.1 KV grade as required. 4 x 25 SQMM (28mm) |
| 107 | CABLE END TERMINATION: Supplying and making end termination with brass compression gland and Aluminium/copper lugs for following size of PVC insulated and PVC sheathed / XLPE Aluminium/copper conductor cable of 1.1 KV grade as required. 4 x 50 SQMM (35mm) |
| 108 | CABLE END TERMINATION: Supplying and making end termination with brass compression gland and Aluminium/copper lugs for following size of PVC insulated and PVC sheathed / XLPE Aluminium/copper conductor cable of 1.1 KV grade as required. 3.5C x 70 SQMM (38mm) |
| 109 | CABLE END TERMINATION: Supplying and making end termination with brass compression gland and Aluminium/copper lugs for following size of PVC insulated and PVC sheathed / XLPE Aluminium/copper conductor cable of 1.1 KV grade as required. 3.5C x 150 SQMM (50mm) |
| 110 | MV CABLE LAYING IN WALL: Laying and fixing of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size on wall surface as required.Upto 35 sq.mm(clamped with 1mm thick saddle) |
| 111 | MV CABLE LAYING IN WALL: Laying and fixing of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size on wall surface as required.Above 35 sq.mm and upto 95sqmm(clamped with 25x3mm MS flat clamp) |
| 112 | LABOUR CHARGES FOR FIXING OF FLUORESCENT/MIRROR LIGHT FITTING: Installation, testing and commissioning of pre-wired, fluorescent/Mirror light fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connections with 1.5sqmm FRLS PVC insulated, copper coductor, single core cable and earthing etc. as required. |
| 113 | REMOVAL OF EXISTING PANEL BOARD'S AND DISTRIBUTION BOARD'S AND CABLE TREYS: Removing of existing 3 phase PDB's surface of wall mounted & its incoming & outgoing's old cables & cable treys disconnected and removing of the existing old wiring,light fixtures & old fans without any damage and handed over to Dept/Stores etc. The work also include providing temporary power supply to the essential existing loads as required.as directed by the site Engineer. |
| 114 | SUPPLYING OF TWIN LED LIGHT FIXTURE : Supply, Installation, testing and commissioning of Pre-wired Twin LED 4 ft fitting 20W,230V complete with all accessories.. etc., directly mounted on existing down rods including earthing etc., as required |
| 115 | SUPPLYING AND FIXING OF EXHAUST FAN: Making Exhaust fan holes in exisiting Brick/Rcc wall with 350dia exhaust fan and Supplying and fixing of 350mm Sweep 900rpm, heavy duty Exhaust fan complete with all accessories.etc, fixing in the hole and fixing accessories for including earthing etc., as required. |
| 116 | FOUR POLE MCB: Supplying and fixing of 100 amps rating, 440 volts, \\"C\\" curve, 36kA, miniature circuit breaker suitable for inductive load of four poles in the existing MCB DB complete with connections,testing and commissioning etc. as required.100A 4 pole MCB |
| 117 | FOUR POLE MCB: Supplying and fixing of 63 amps rating, 440 volts, \\"C\\" curve, 36kA, miniature circuit breaker suitable for inductive load of four poles in the existing MCB DB complete with connections,testing and commissioning etc. as required.63A 4 pole MCB |
| 118 | SUB PANEL BOARD : Supply, Installation, Testing & Commissioning of cubical pattern power outdoor type split into distinct metal-segregated zones: The Main Busbar Chamber, the Individual Cable Alleys, and Individual Breaker Cubicles IP55, completely weatherproofed against dust, driving rain, and splashing water Fabricated from 14 SWG (2.0mm) sheet steel for the frame/outer doors and 16 SWG (1.5mm) for internal compartment barriers. Features an integrated slanted rain canopy (weather hood) extending over the front door, finished with UV-resistant, anti-corrosive Siemens Gray (RAL 7032/7035) epoxy powder coating. Each MCCB compartment has its own interlocked hinged door. The door cannot be opened while the MCCB is in the \\"ON\\" position. High-conductivity, Electrolytic Grade Aluminium Busbars (Grade E91E). Sized with a cross-sectional area to easily support 200A continuously, keeping temperature rise strictly under 35°C above ambient. Fully shrouded in color-coded (Red, Yellow, Blue, Black) heat-shrinkable PVC sleeves. All aluminium-to-aluminium joints are coated with anti-oxide grease. Connections to MCCB terminals use specialized bimetallic lugs or plating to prevent galvanic corrosion. Mounted firmly on non-hygroscopic, shatterproof SMC/DMC (Epoxy Resin) insulators to withstand high electromagnetic short-circuit stresses. Clear Polycarbonate shrouds cover live terminals inside individual compartments, preventing accidental contact when a specific door is opened. Dedicated vertical cable alleys with independent doors allow neat routing of incoming and outgoing armored cables. Equipped with a thick, detachable, gasketed bottom gland plate for cable entry. A continuous Aluminium/GI earth busbar runs along the entire length of the panel with twin external grounding studs. Individual compartments are equipped with small, dust-filtered louvered vents or internal cooling designs to manage heat generated by the breakers under full load. A door-mounted, micro-processor-based Class 0.5S accuracy MFM is installed on the Incomer cubicle. It features an LED/LCD display to monitor Voltage (V), Current (A), Frequency (Hz), Power Factor (PF), and Active/Reactive Energy (kW/kWh/kVAh) with an RS-485 Modbus port for SCADA/BMS integration. Three 200/5A ratio, Class 0.5 accuracy, 5VA burden resin-cast CTs are mounted on the main incoming aluminium busbars to drive the MFM. Three low-power, cluster-type LED phase indicating lamps (Red, Yellow, Blue) are mounted on the Incomer door, complete with individual backup protection fuses.All breakers feature 100% Ics (Service Breaking Capacity) rating to ensure they remain fully functional after clearing a fault.(a) Incomer: 1no 4 pole 200A, 36kA FPMCCB (b) Out going MCCB: (i) 3 Nos. 100 A, 25kA, 415 V, FPMCCB(ii) 3 Nos. 63 A, 25kA, 415 V, FPMCCB Note: General arrangement drawing should be got approved before fabrication and including civil work for fountation bolt, nut & washers along with MS angle support as per site condition as required. |
| 119 | SUPPLY OF ALUMINIUM UG CABLE: Supplying of following PVC insulated/XLPE,sheathed and aluminium armoured 1100V grade UG cable conforming to IS 1554 and submit with necessry test certificate etc..,as required.4 X 25 sq.mm |
| 120 | 18W LED Surface Fitting: Supply of 18W LED 6500K (595mmX595mm) Surface fitting square light fitting complete with all accessories etc. as required. |
| 121 | MIRROR LIGHT FITTING : Supply of 10W LED mirror light fitting with fixing accessories on wall etc., as required. |
| 122 | SUPPLYING AND FIXING OF EXHAUST FAN: Making Exhaust fan holes in exisiting Brick/Rcc wall with 230dia exhaust fan and Supplying and fixing of 230mm Sweep 900rpm, heavy duty Exhaust fan complete with all accessories.etc, fixing in the hole and fixing accessories for including earthing etc., as required. |
| 123 | Buy Back Items |
| 124 | Buy-Back (ie minus) Civil: Buy-back of existing Ms /wooden doors/ windows of frames with grill, shutters, glazing, fittings all complete including making good the brick work and required repair plasetering etc as per the direction of In-Charge. Any size. |
| 125 | Buy-Back (ie minus) Electrical: BUYBACK OF OLD PANEL, DB AND CABLE TREY: Buy back of existing of Old db'S consists of MCB with individual compartment,Copper/Aluminium Busbars and Old cable trey & old cables etc. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysOct 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender