Tender For Combined Station Works For Scrapper Barrel Modification And Nrv Installation In Surge Line At Wrpl, Kot Station.
Tender Value
16.44 Lakhs
Estimated cost
Bid Submission
13 Oct 2026
5 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pali → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Combined Station Works For Scrapper Barrel Modification And Nrv Installation In Surge Line At Wrpl, Kot Station.
BOQ
| Sl. No. | Item Description |
| 1 | GST % for the tenderPlease select the rate of GST in cell AY13. Rate selected shall be applicable for all the items under BoQ. |
| 2 | Civil Works |
| 3 | EARTHWORK - Excavation over areas - Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas incl uding trimming of sides of the trenches, dressing, ramming and levelling the bottom of the trenches correct to level, grade etc. inc luding filling in sides of foundation trenches, plinth etc. with the excavated earth available and/or depositing the excess earth wi thin station area limits, in layers not exceeding 20 cms. thick, consolidating each deposited layer by ramming, watering, dressing t o level and grade , complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of Site Engineer. |
| 4 | EARTHWORK - In all kinds of soil - In all kinds of soil |
| 5 | DISMANTLING & DEMOLISHING - DEMOLISHING MANUALLY/ MECHANICAL - Demolishing cement concrete manually/ by mechanical means including d isposal of material within 50 metres lead as per the directions of Engineer-in-Charge. [Notes: (1) Dismantling shall be allowed duri ng day shift only & prior permission for the same shall be obtained. (2) Providing of necessary covers/ barricades around the work a rea shall be done prior to dismantling operations] : |
| 6 | DISMANTLING & DEMOLISHING - NOMINAL 1:3:6 RICHER EQUIVALENT DESIGN - Nominal concrete 1:3:6 or richer mix (including equivalent desi gn mix) |
| 7 | ROAD WORK - INTERLOCKING FOOTPATH/ CENTRAL... - Taking out existing CC interlocking paver blocks from footpath/ central verge, inclu ding removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately a nd stacking of serviceable material within 50 metre lead as per directions of the Engineer-in-Charge. |
| 8 | ROAD WORK - COCRETE INTERLOCKING BLOCKS DESIGN/… - Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the directions of the Engineer-in-Charge. [Note: Old CC paver blocks shall be supplied by th e department free of cost]. |
| 9 | FINISHING - 20 mm cement plaster of mix : - FINISHING: CEMENT PLASTER (IN FINE SAND) :20 mm cement plaster of mix : |
| 10 | FINISHING - 1:4 (1 cement : 4 fine sand) - 1:4 (1 cement : 4 fine sand) |
| 11 | FINISHING - FINISHING EXTERIOR REQUIRED SHADE... - Finishing walls with Acrylic Smooth exterior paint of required shade : New work ( Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.9 kg/10 sqm) |
| 12 | STEEL WORK - SUPPLYING STRUCTURAL JOISTS, TUBES,… - Supplying steel structural items at site such as joists, tubes, pipes, channels, angles, beams, plates, flats, square/ rectangular hollow sections, bars, MS gratings, chequered plates, C.I. Rollers, bolts & nuts, washers, grouting/ foundation bolts, etc., fabrication and erection/fixing of structures such as saddle supports, pipe supports, va lve supports, platforms, walkways, stairways, crossovers, struts, chain link fencing posts, gate, collapsible gate, ladders, safety grills, signboards, supports for cable trench, cable racks, cable tray support, push button control posts, supporting structures etc . as per drawing including drilling holes, making slots for barbed line, wire hoisting, placing in position, embedding in concrete e tc. including surface preparation using abrasive blast cleaning or power tools cleaning, priming and painting the finished structure by applying one coat of High Build Epoxy Zinc Phosphate Primer (min. 50 µm), one coat of Self-primed, surface tolerant, High build Epoxy mastic (min. 150 µm) and one finish coat of Isocyanate Aliphatic Poly-Urethane(PU) Finish Paint (min. 50 µm) (Total DFT: 250 µ m), including supply of all inputs such as labour, materials, consumables, tools and tackles, welding electrodes, paints of approved make as per vendor list in the tender,cutting to required size welding of joints, fixing anchor plates,bolts, theading, nuts, washe rs, sleeves etc. and necessary lettering of approved pattern on main gate, signboards etc. necessary to perform and complete the wor k in all respect, in accordance with drawings, specifications and instructions of the Site Engineer/ EIC. Note: This item is excludi ng the cost of concrete work. |
| 13 | REINFORCED CEMENT CONCRETE - Steel reinforcement for R.C.C. work - Steel reinforcement for R.C.C. workincluding initial straightenin g of coiled/uncoiled bars, removal of loose rust, cutting, bending to correct size & shape, binding with 18 gauge G.I. wire at each intersection and placing at any position, at any height and depth complete in all respects inclusive of cost of all labour, material s, tools, tackles etc. as per drawings, specifications and direction of Site Engineer. : Thermo-Mechanically Treated bars of grade F e-500 D or more |
| 14 | FLOORING - SUPPLYING SOLING FOUNDATION TRENCH, - Supplying and laying flat brick soling in foundation trench, in floors, garages, su mps, etc., with bricks of class designation 50 laid to proper slope, level and grade etc. filling of the joints with sand etc. compl ete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions o f the Engineer-in-Charge. |
| 15 | CONCRETE WORK - POSITION CEMENT SPECIFIED GRADE... - CONCRETE WORK : CEMENT CONCRETE (CAST IN-SITU) : Providing and laying in positi on cement concrete of specified grade at all depths including ramming & shuttering etc. complete in all respects inclusive of cost o f all labour, materials, tools, tackles etc. as per drawings, specifications and direction of Site Engineer: |
| 16 | CONCRETE WORK - 1:3:6 (Coarse Sand & Aggregate-20mm) - 1:3:6 [1 cement : 3 coarse sand (Zone-III) derived from natural sources : 6 g raded stone aggregate 20 mm nominal size derived from natural sources] |
| 17 | CONCRETE WORK - 1:4:8 (Coarse Sand & Aggregate-40mm) - 1:4:8 [1 cement : 4 coarse sand (Zone-III) derived from natural sources : 8 g raded stone aggregate 40 mm nominal size derived from natural sources] |
| 18 | REINFORCED CEMENT CONCRETE - RCC CEMENT CONC WORK (1:1.5:3) 20MM - REINFORCED CEMENT CONCRETE : RCC (CAST IN-SITU) : Providing and l aying structural reinforced cement concrete work (1:1.5:3) conforming to IS:456 (1 cement : 1.5 coarse sand : 3 graded stone aggrega te 20 mm nominal size) at all heights and depth for construction of foundations, beams, columns, staircases, chajja,lintels, balconi es, shelves, plain window sills, roof slabs, facia, canopies, fins, porch, water tank etc. including providing centering, shuttering , staging, scaffolding, form work etc compacting with mechanical vibrator, curing etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of Site Engineer. (Payment for Reinforceme nt shall be made as per relevant item of SOR). |
| 19 | REINFORCED CEMENT CONCRETE - a) All work up to plinth level - a) All work up to plinth level |
| 20 | T&I Works - Supply |
| 21 | FIELD INSTRUMENT - Scrapper Detector - FIELD INSTRUMENT - FIELD INSTRUMENT - Scrapper Detector - Electronic Type - 18IN, 600 # Serie s [ SAP Code: 8131020203] |
| 22 | CSW - Supply of Reducers - Supply of Reducers - flame proof and weather proof including EP/WP certificates: |
| 23 | CSW - 1 inch to 1/2 inch Reducers - 1 inch to 1/2 inch Reducers |
| 24 | CSW - SUPPLY OF PI , RANGE 0 TO 100 KG / CM2 - Supply of Pressure Indicators (PI) of the range 0 to 100 Kg / Cm2 as per the technical specifications attached in the Tender. |
| 25 | T&I Works - Services |
| 26 | CSW - INSTALLATION & TESTING OF SD - INSTALLATION & TESTING OF SCRAPPER DETECTOR: Installation, assistance in testing and commission ing of Scrapper Detector of various ratings aas per OEM recommandations, vendor drawings, directions of engineer in-charge/site engi neer and other approved drawings. |
| 27 | CSW - CABLE LAYING (control/signal/Triad/ LT) - CABLE LAYING: Laying of armoured / unarmoured cables (control / signalling/ Triad/ L T cable etc.) and installation / pulling of telephone cables of all type in trenches, in cable racks, in trays, in protective pipes, poles, columns, in conduits, in panels, in buildings, walls, ceilings, and on structures etc.; including the supply and installatio n of all required materials such as fixing clamps, screws, cable straps, tags etc. as required (other than the supply of the conduit s, cables, pipes, cable racks, trays, poles, structures and panels) complete in all respect,as per specifications,drawings and direc tions of the SiteEngineer, including cost of all labour, tools, consumable materials etc. and cutting the cables in required lengths |
| 28 | CSW - Cables having outer diameter upto 20mm - Cables having outer diameter upto 20mm |
| 29 | Mechanical Works - Supply |
| 30 | CSW - Supply - Supply of Steel Flange (WNRF) - Supply of Steel Flange (WNRF) |
| 31 | CSW - Supply - 2\\" WNRF 600# - 2\\" WNRF 600# |
| 32 | CSW - Supply - 3\\" WNRF 600# - 3\\" WNRF 600# |
| 33 | CSW - Supply - 1\\" WNRF 600# - 1\\" WNRF 600# |
| 34 | CSW - Supply - 8\\" WNRF 150# - 8\\" WNRF 150# |
| 35 | CSW - Supply - Supply of Spiral Wound Metallic Gaskets - Supply of Spiral Wound Metallic Gaskets |
| 36 | CSW - Supply - 1\\" SWMG ANSI 600# - 1\\" SWMG ANSI 600# |
| 37 | CSW - Supply - 2\\" SWMG ANSI 600# - 2\\" SWMG ANSI 600# |
| 38 | CSW - Supply - 3\\" SWMG ANSI 600# - 3\\" SWMG ANSI 600# |
| 39 | CSW - Supply - 8\\" SWMG ANSI 150# - 8\\" SWMG ANSI 150# |
| 40 | CSW - Supply - Supply of Steel Fasteners - Supply of Steel Fasteners |
| 41 | CSW - Supply - 8\\" x 150# (0.750\\" Dia. X 4.75\\" Len - Fasteners for Flanges 8\\" x 150# (0.750\\" Dia. X 4.75\\" Length) |
| 42 | CSW - Supply - 3\\" x 600# (0.750\\" Dia. X 5.50\\" Len - Fasteners for Flanges 3\\" x 600# (0.750\\" Dia. X 5.50\\" Length) |
| 43 | CSW - Supply - 2\\" x 600# (0.625\\" Dia. X 4.75\\" Len - Fasteners for Flanges 2\\" x 600# (0.625\\" Dia. X 4.75\\" Length) |
| 44 | CSW - Supply - 1\\" x 600# (0.625\\" Dia. X 4.00\\" Len - Fasteners for Flanges 1\\" x 600# (0.625\\" Dia. X 4.00\\" Length) |
| 45 | API 6D SWING CHECK VALVE - API 6D SWING CHECK VALVE, 150# - SWING CHECK, FULLSWING,RF,API6D,150,8IN |
| 46 | CSW - Supply - Supply of Weld-o-Let - Supply of Weld-o-Let |
| 47 | CSW - Supply - 10\\"x2\\" X 600# Weld-o-let - 10\\"x2\\" X 600# Weld-o-let |
| 48 | CSW - Supply - 18\\"x2\\" X 600# Weld-o-let - 18\\"x2\\" X 600# Weld-o-let |
| 49 | CSW - Supply - Supply of API 6D Ball Valve - Supply of API 6D Ball Valve |
| 50 | CSW - Supply - 2\\"x ANSI 600# HOV F/F API 6D Ball Valve - 2\\"x ANSI 600# HOV F/F API 6D Ball Valve |
| 51 | CSW - Supply - Supply of API 6D Gate Valve - Supply of API 6D Gate Valve |
| 52 | CSW - Supply - 1\\"x800# W/W, A/G, HOV,API 602 GATE V - 1\\" x 800# W/W, A/G, HOV, API 602 GATE VALVE |
| 53 | CSW - Supply - 2\\"x ANSI 600# HOV F/F API 6D Gate Valve - 2\\"x ANSI 600# HOV F/F API 6D Gate Valve |
| 54 | CSW - Supply - Supply of Bends - Supply of Bends |
| 55 | CSW - Supply - 3\\" 600# 90 deg LR Bend - 3\\" 600# 90 deg LR Bend |
| 56 | CSW - Supply - 2\\" 600# 90 deg LR Bend - 2\\" 600# 90 deg LR Bend |
| 57 | CSW - Supply - 1\\" 600# 90 deg LR Bend - 1\\" 600# 90 deg LR Bend |
| 58 | CSW - Supply - Supply of Equal Tee - Supply of Equal Tee |
| 59 | CSW - Supply - 2\\" ANSI 600# Equal Tee - 2\\" ANSI 600# Equal Tee |
| 60 | CSW - Supply - 1\\" ANSI 600# Equal Tee - 1\\" ANSI 600# Equal Tee |
| 61 | CSW - Supply - Supply of Concentric Reducer - Supply of Concentric Reducer |
| 62 | CSW - Supply - 3\\"x2\\" x Concentric Reducerx 600# - 3\\"x2\\" x Concentric Reducerx 600# |
| 63 | CSW - Supply - 2\\"x1\\" x Concentric Reducerx 600# - 2\\"x1\\" x Concentric Reducerx 600# |
| 64 | CSW - Supply - Supply of Half coupling & Nipple - Supply of Half coupling & Nipple |
| 65 | CSW - Supply - 1\\" 3000 Class HALF COUPLING - 1\\" 3000 Class HALF COUPLING |
| 66 | CSW - Supply - Supply of ASTM A106 Gr.B / A333 Gr6 Pip - Supply of ASTM A106 Gr.B / ASTM A 333 Gr.6 Pipe |
| 67 | CSW - Supply - 2.375\\" ODx 0.218\\" WT ASTM A 106 - 2.375\\" ODx 0.218\\" WT (Sch.XS) ASTM A 106 Gr B Bare pipe |
| 68 | CSW - Supply - 1.315\\" ODx 0.179\\"WT ASTM A 106 - 1.315\\" ODx 0.179\\"WT (Sch.XS) ASTM A 106 Gr B Bare pipe |
| 69 | CSW - Supply - 3.500\\" ODx 0.216\\" WT -ASTM A 106 - 3.500\\" ODx 0.216\\" WT (Sch.STD) ASTM A 106 Gr B Bare Pipe |
| 70 | Mechanical Works - Supply |
| 71 | CSW - Services - Piping Modification: - Piping Modification: Carrying out modification in already fabricated and/ or erected pipe du e to change in drawing or as required by site condition, taking delivery of pipe, pipe fittings, steel flanges, spiral wound metalli c gaskets & fasteners from designated location within station premises, transporting the same to site, cutting of pipe and / or weld joint , edge preparation, bending, lining up, welding and installing pipes and pipe fittings, flanges, elbows, equal and reducing o utlet tees, concentric/eccentric reducers, y-type strainers, drain funnels, vent pipes and tapping for instruments such as pressure gauges, thermal relief valves, thermowells etc., installing above ground at all elevations connecting with equipment nozzles, valves , vessels, in line instruments etc., welded and threaded pipe line of different pressure ratings, flushing pipes by water after clea ning by compressed air, hydrostatic testing of each section to the specified pressure, draining the water, tie-in, final cleaning-up and dispoal of wastes and surpluses including providing all inputs such as labour, material, equipments and consumables necessary t o perform the work (other than those specifically under taken by the owner in this contract) and completing the work in all respects in accordance with the drawings, specifications and instructions of Site Engineer / EIC. (Item is to be operated upon approval of S Ite Enginner, Item covers only modification / rework jobs.) |
| 72 | CSW - Services - Pipe size up to 2 inch NB : - Pipe size up to 2 inch NB : |
| 73 | CSW - Services - Pipe size 3 inch NB to 6 inch NB: - Pipe size 3 inch NB to 6 inch NB: |
| 74 | CSW - Services - Pipe size 8 inch NB to 28 inch NB: - Pipe size 8 inch NB to 28 inch NB: |
| 75 | CSW - Services - Hook-up of New Piping with existing - Hook-up of New Piping with existing process Piping: Isolating the section by closing the valve and providing positive isolation with the help of suitable plates / spectacle blind, Draing of the section, water flushing,Cutting of portion of existing piping of required length by Cold cutting machine (to be arraged by contractor)/ Opening of WNRF/SORF/Blind Flange trimming, grinding, beveling the edges, adding spool piece of required length/ Tee of the corresponding pipe size, thickness, adjoining and welding both the pipe ends ,or welding WNRF to pipe and bolting it with spool pipe mating flange incl uding supply of all inputs such as labour, materials, equipment, consumables etc. necessary to perform and complete the work in all respect as per specification and instruction of the Site Engineer / EIC. NOTE: i) This is a high precision work which is to be execu ting in minimum time so reduce operation downtime period taking all safety precautions. Before start of work firm planning to be don e in consultaion with EIC/ Site Engineer and contractor should mobile all required resources before start of work. ii) The job also include evacuation of product from the piping section after isolating the section and flushing with water and its disposal. iii) Pri or to start of work Party to prepare the complete scheme of hook up job and submit it to EIC/Site Engineer for approval and should c arry out the job as per approved procedure. |
| 76 | CSW - Services - 8\\" NB Piping: - 8\\" NB Piping: |
| 77 | CSW - Services - 3\\" NB Piping: - 3\\" NB Piping: |
| 78 | CSW - Services - 2\\" NB Piping: - 2\\" NB Piping: |
| 79 | CSW - Services - Providing Temporary Barricading - Providing Temporary Barricading made of GI/ steel sheet with angle iron frame (40 x40x6) in panels of 1.5 to 2.0m including lateral/ vertical angle bracing/ steel beam at bottom for stability, earth filling up to 3 00mm height above ground level, maintaining the barricading during construction at site, removing the same and clearing site after c onstruction complete in all respects as per instructions of Site Engineer |
| 80 | CSW - Services - Radiographic Inspection - Radiographic Inspection: Inspection of welding by Digital Radiography (CR) or by conventi onal film radiographic method on all types of piping including processing of images/ films and interpreting the results of weld qual ity and reporting the same to the Site Engineer together with recommendations as to the acceptability or otherwise of the welds, sub mitting the finished radiographic films as may be approved or directed by Engineer-in-Charge inclusive of supply of all pesonnel, la bour, materials, equipment, consumable, inputs, etc. and providing all services complete in all respects as envisaged in the contrac t documents. Note: i) Payment will be on the basis of number of welds of the respective size radiographed and shall be all inclusive for the complete job of radiographic inspection as envisaged in the contract document. ii) Radiography not involving full girth wel d will be paid at 50% of the rate for full girth weld for the respective size. iii) For set-on type branch welding, the rate for rad iography will be as applicable to the branch pipe size. iv) Repeat radiography of individual welds due to defective films or repair of welds shall be done at contractor's cost. v) In case where radiography is not possible, verification by utrasonic testing shall b e done at contractors cost., vi) Magenetic particle inspection as and where\\" required shall be done at Contractors cost. vii) In cas e of conventional film radiography, all films shall be digitised and submitted to EIC/ Site Engineer in USB drives. viii) In case of Digital/ Computed Radiography, native files along with image/ pdf files shall be submitted to EIC/ Site Engineer in USB drives. |
| 81 | CSW - Services - 2\\" NB Pipe Joints RT - 2\\" NB Pipe Joints RT: |
| 82 | CSW - Services - 8\\" NB Pipe Joints RT - 8\\" NB Pipe Joints RT: |
| 83 | CSW - Services - 3\\" NB Pipe Joints RT - 3\\" NB Pipe Joints RT: |
| 84 | CSW - Services - 1\\" NB Pipe Joints RT - 1\\" NB Pipe Joints RT: |
| 85 | CSW - Services - Installation of Swing Check Valve - Installation of Swing Check Valve: Taking delivery of valves of all types and p ressure rating from the designated location within station premises, transporting the same to site, erecting above ground on precons tructed foundations or underground including earth work in excavation and filling for under ground valves at elevations specified in the drawings, priming and painting of above ground valves, PU Painting of under ground portions (if applicable) or flood coating an d wrapping of under ground portions (if applicable) including all inputs, labour, material and consumable (other than those specific ally undertaken to be supplied by the owner) and completing the work in all respects in accordance with the drawings, manufacturer's installation instructions and specifications and instructions of the Site Engineer / EIC. |
| 86 | CSW - Services - 8\\", 150#/300#, F/F - 8\\", 150#/300#, F/F: |
| 87 | CSW -Composite - External Painting - Surface preparation of piping, equipment and valves etc. by abrasive blast cleaning or with pow er wire brush (wherever blast cleaning is not possible) confirming to SA 2.5, making the surface free of dust, grease, mill scales e tc., application of 1 coat x 50-75 microns DFT of Inorganic Zinc Ethyl Slicate Primer, followed by application of sealer coat of 30 micron DFT and intermediate coat of 150 micron DFT with surface tolerant epoxy mastic paint and 2 coats x 50 micron each DFT of Isoc ynate Aliphatic Poly Urethene (PU) by airless spray, with approved materials, paints, tools, tackles, consulambles, non-consumables, labour, equipment etc. to complete the job in all respects as per specification and instructions of the Site Engineer / EIC. The to tal DFT shall be minimum 330 microns. |
| 88 | CSW -Composite - Reflective radium sticker printing - Reflective radium sticker letter printing and apply in background stickering i ncluding pasting and fixing with supply of all manpower, equipments, tools, tackles, consumables, non-consumables, scaffolding (sepa rate SOR item) working at any height etc. as per instruction of EIC/ Site Engineer to complete work in all respects. |
| 89 | CSW -Composite - Reflective radium (background sticker) - Reflective radium sticker printing (background sticker) and apply includin g pasting and fixing with supply of all manpower, equipments, tools, tackles, consumables, non-consumables, scaffolding (separate SO R item) working at any height etc. as per instruction of EIC/ Site Engineer to complete work in all respects. |
| 90 | CSW - Services - Single Cut Joint Hook-up - Single Cut Joint Hook-up: Cutting (Hot/ Cold cutting) of portion of existing piping, tri mming, grinding, bevelling the edges, aligning with/ without addition of spool piece, welding the joint including supply of all inpu ts such as labour, materials, equipment, consumables etc. necessary to perform and complete the work in all respect as per specifica tion and instruction of the Site Engineer / EIC. Note: The job also include evacuation of product from the piping section after isol ating the section and flushing with water and its disposal. |
| 91 | CSW - Services - 8\\" NB - Single Cut Joint - 8\\" NB - Single Cut Joint: |
| 92 | Tapping of Hole in Barrel |
| 93 | Tapping of Hole in Barrel - Tapping of 2\\" hole in the barrel of size 10\\" to 22\\" including of all machine, labour and all charges. A hole shall be drilled by the contractor at Pig Barrel (Minor portion) by contractor supplied tapping machine. Expected hole size id 14 mm with 2 inch tapping machine. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysOct 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender