Tender for Tender for Neurosurgery Department Implant Neurosurgery Department Implant Consumable Items Aneursysm Clip (Sugita Type) Instrument Electric Drill(Manman Etc
Tender Value
3.70 Crore
Estimated cost
Bid Submission
29 Oct 2026
11 days left
EMD
7.40 Lakhs
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kota → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Neurosurgery Department Implant Neurosurgery Department Implant Consumable Items Aneursysm Clip (Sugita Type) Instrument Electric Drill(Manman Etc
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 16-Oct-2026 | specification correction in technical bid | Technical Bid | 29-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | (Anterior Cervical Plating System Variable Angle Screw System) * A single plate must provide the option of rigid, toggling and hybrid construct.* The cephalad/caudal angulation must be of approx. 28 degrees. With 8degree of. offset* The Lateral/Medial angulation range must be of 14 degrees with 7 degrees of offset.* Locking mechanism of the screw must be one step locking with ELGILOY CLIPShould block the screws from coming out.* The plate must be 1.8 -2.5mm in thickness and 16-17.5 mm in width* The core diameter of the screws must be 3mm with outer diameter being 4.0mm and 4.5mm and self-drilling\\"* The plates must be available in following sizes: one level plates 22.6-34.6 mm, Two level plates 36.6-54.6mm three level plates 53.6-77.6mm and four level plates\\"The plate us be available in following sizes |
| 2 | a) Cervical Plate Level - 1 |
| 3 | b) Cervical Plate Level - 2 |
| 4 | c) Cervical Plate Level - 3 |
| 5 | d) Cervical Plate Level – 4 |
| 6 | (Anterior Cervical Interbody Fusion device with screw mechanism (zero profile) |
| 7 | * The Implant should act as standalone interbody fusion device for cervical spine with the benefits of an interbody spacer and an anterior cervical spine.* The implant must be a combination of PEEK/Titanium must automatically align when inserted\\"* The implant must have radio opaque marker for posterior and anterior visualization during imaging and teeth on superior and anterior surface for initial stability\\"* Spacer component must be made of PEEK\\"* The implant must have on one step locking screw and should form a bone wedge with 40° + 5° cranial/caudal angle with 2.5° medial and lateral angle.\\"* The screw must come with self-tapping or self-drilling and self-cantering options with titanium alloy material* The screw must come in 3.0mm to 4.5mm diameter & must be colour coded by screw lengths varying from 12-20mm.* The implants must come in parallel lordotic and convex implants sets with heights varying from 5mm to 12mm with an increment of 1mm each.* Should have option for 2-4 screws |
| 8 | (Anterior Cervical Interbody Fusion device with screw mechanism (zero profile) |
| 9 | a) Occipital Plate (t or Y shaped) |
| 10 | b) C1 -C2 spacer |
| 11 | c) Bone Screw |
| 12 | d) Polyaxial Screw with Locking cap |
| 13 | e) Rod * Joint spacer size 3.5 mm, 4.5mm, 5mm, 6mm* Joint spacer made up of titanium* Should be tapered in the front and there should be able to attach to the instrument for insertion. |
| 14 | Top Loading Implant System for Posterior Stabilization of the Cervical Spine. * The system should be top loading for the posterior stabilization of the cervical andupper thoracic spine* The system should have cancellous & cortex bone screws. (Titanium)* The system should have locking screws for angularly stable locking and fixation of the rod. (Titanium)* The system must have self-tapping screws.* The system must have 3.5mm Titanium rod.* The system should have OC Fusion option.* The system should offer hooks.* The system should have cancellous profile bone screws:3.5mm: 8mm - 50 mm (2 mm increments)4.0mm: 8mm - 50 mm (2 mm increments)4.5mm: 8mm - 50 mm (2 mm increments)* The system should have Cortical profile bone screws:3.5mm: 28 mm - 50mm (2 mm increments)* The System should have screw head profile:Height = 1 mm and reduction screw 22mm height* The system should have Rod Run = 9mm* The system should have shaft screws (Cortical profile):3.5 mm: 22mm - 36mm (2 mm increments)* The system should have Occipital Plate/Rods options.System should have following Components. |
| 15 | a) Polyaxial screw with Locking cap |
| 16 | b) Rod |
| 17 | Anterior cervical interbody fusion device with integrated plate. * The implant should act as standalone interbody fusion device for cervical spine with the benefits of an interbody spacer and an anterior cervical plate.* The implant must be a combination of plate and spacer wherein the plate must automatically align when inserted.* The implant must have radio opaque marker for posterior visualization during imaging teeth on superior and anterior surface for initial stability.* Spacer component must be made of PEEK optima (Polyetheretherketone)* The implant must have one step locking screw and screws should form a bone wedge with 40*- 5' cranial/caudal angle with 2.5-degree medial lateral angle.* The screw must come with self-tapping and self-cantering/drilling option, with titanium alloy material (Ti-6AI-7Nb)* The screws must come in 3.0mm to 4.5mm diameter & must be colour coded by screw length varying from 12mm to 18mm.* Implant's triobular thread cutting flutes should be self-cantering.*The implants must come in parallel lordotic and convex implant sets with heights varying from 5mm to 12mm with an increment of 1mm each. |
| 18 | Cervical Peek Cage 1) The cage must be radiolucent with sharp teeth inter body fusion cage system of implants and instruments designed for anterior cervical interbody fusion (ACIF) and should be compatible with anterior cervical plating system (ACP). 2) The cages must be curved cages, which mimic the curvature of the healthy endplate.3) The cages must be Wedge-shaped cages, which match the flattened degenerated end plate.4) All implants must be 15mm wide and 12.5mm deep and are supplied sterile pre-packed.5) The available implant heights must be 5mm, 6mm, 7mm, 8mm, 9mm and 10mm. 6) Should be designed for use with open, mini and endoscopic technique. |
| 19 | Expandable Corpectomy Cages. * Expandable vertebral body replacements.* For Cervical & Upper Thoracic Spine.* Should have ratchet system so that desired height can be achieved.* Should achieve height from 17mm to 70mm & angle from 4.5 to 7 degree.* Should be made up of medical approved good quality titanium.* Foot print Size - 12x/4mm,21x23mm, 25x 32mm* Expanding height range from 15-89 mm for cervical24-70 mm for thoracic29- 119 for lumbar* One instrument to insert and expand the implant* It should have smooth in situ continuous expansion* Captured locking screw* Multiple insertion angles to accommodate various approaches* Should have window for post insertion bone graft packing* Large open canal for bone graft material |
| 20 | Expandable Corpectomy Cages with integrated screw mechanism * Expandable vertebral body replacements.* For Cervical & Upper Thoracic Spine.* Should have ratchet system so that desired height can be achieved.* Should achieve height from 17mm to 70mm & angle from 4.5 to 7 degree.* Should be made up of medical approved good quality titanium.* Foot print Size - 12x/4mm,21x23mm, 25x 32mm* Expanding height range from 15-89 mm for cervical24-70 mm for thoracic 29- 119 for lumbar* One instrument to insert and expand the implant* It should have smooth in situ continuous expansion* Captured locking screw* Multiple insertion angles to accommodate various approaches* Should have window for post insertion bone graft packing* Large open canal for bone graft material* The screw must come with self-tapping or self-drilling and self-cantering options with titanium alloy material* The screw must come in 3.0mm to 4.5mm diameter & must be colour coded by screw lengths varying from 12-20mm. |
| 21 | Locking Cervical Cage with Plate 1) Expandable vertebral body replacements cage within built cervical plate for fixation in situ within the system for Cervical & upper Thoracic (C3-T2) Spine.2) Should have continuous expansion system so that desirable height can be achieved 3) Should have rapid & controlled in situ expansion with plate providing the option of rigid, toggling and hybrid construct4) The plates must be available in all sizes. I level, II level, III level.5) Should be made of medical grade titanium material6) Locking mechanism of the plate screws must be one step locking which should block the screws from coming out.7) The core diameter of the screws must be 3mm with outer diameter being 4.0mm and 4.5mm.8) All the screws must be colour coded and available in self tapping as well as self-drilling options. |
| 22 | Titanium Mesh Cage for Vertebral Body Replacement Per MM . 10-12-15mm diameter |
| 23 | a) For cervical round / Oval |
| 24 | b) Thoraco / Lumber-round /Oval |
| 25 | Odontoid Screw * Screw should made up of Titanium Alloy (TAN).* Screw should be cannulated* Screw should be self-drilling.* Screw should consist of 12mm short thread* Screw should be of 3.5 to 4.5 mm diameter.* Screw should be available in the length of 36mm to 50mm.The whole system should thus enable the following.Help in preservation of atlantoaxial mobility with lag screw compression technique.With wire guiding ensures precise positioning of implants & instruments. |
| 26 | Top Loading Pedicle Screw System * Top loading preassembled Polyaxial pedicle screw with dual core, titanium alloy TAN(Ti A16 N7) with following specification and colour coding:Diameter 4mm to 8mm, Lengths 20mm to 100mm* Angulations of the screw head of 25 to 50 degree in all direction.* 3.5mm hexagonal locking cap based on titanium break off plug locking mechanism.* Two step locking mechanism with initial locking with locking cap and final locking with blue set screw.* The option of achieving case specific lordotic and parallel compression with the same system.* Curved rods in 6mm diameter from 45mm to 85mm in the increments of 5mm Straight rod in 6mm diameter from 50mm to 150mmSystem should have following parts. |
| 27 | a) Polyaxial screw |
| 28 | b) Rod |
| 29 | c) reduction screw |
| 30 | d) Cannulated Polyaxial pedicle screw for reinforcing using bone cement |
| 31 | Transforaminal lumbar interbody fusion. (TLIF) * The cage must be radiolucent made up of PEEK - optima material with sharp teeth designed for transformational lumbar interbody fusion (TLIF)* The cages must have rounded tapering edges/kidney shape allowing easy insertion thus minimizing injuries to endplates and neural structures.* The cage should be able to move up to 80 degrees after attaching with one key instrument.* The cage must have 3 titanium markers (Two lateral, one central) to indicate the cage position on X ray.* The cages must have injection moulded roughened surface promoting bone integration and on growth.* The cages must have biconvex shape providing even distribution of compressive forces along the endplates thus stability.* The cages must have one broad graft hole and two lateral holes.* The cages must be pre filled with chromOS, synthetic bone graft.* Implants must be available in two footprint sizes 10x27mm and are available as sterile packed.* The available implant heights must be 7mm,8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 15mm, 17mm, |
| 32 | a) Cage for open surgery |
| 33 | b) Cage for endoscopic surgery |
| 34 | Posterior lumber interbody fusion PLIF. * The system should be able to provide:Adequate stabilityRestores disc heightRestores lordosisPreserves the integrity of the vertebral body endplatesProvides an optimized fusion bed.* Interbody fusion cage system of implants and instruments for posterior lumbar interbody Fusion (PLIF)* Cage must be made of PEEK material preferably radiolucent.* Cage must have two X-ray markers integrated into the cages to enable easy visualization of their position postoperatively.* PEEK material used must contain no carbon fibres, thereby reducing the risk of systemic uptake and local inflammatory response.* Cages must be available in 6 heights in 2mm increments, and should be supplied sterile pre-packed.* The optimal anatomical shape and supportive superior and inferior surface design of the cage should reduce the risk of subsidence into the adjacent vertebrae.* The cage should have perforated structure which must allow for bony ingrowth through the cage, and the design must ensures optimal implant-to-endplate contact* Cage must be designed for an optimal fit into the natural concavity between t w o adjacent vertebral bodies.* Cage must have teeth on the superior and inferior surfaces providing additional primary stability.* The cage must be injection moulded PEEK cage so that it has roughened surface, which is superior to a machined PEEK surface in that it promotes bone integration and on growth. |
| 35 | a) Cage for open surgery |
| 36 | b) Cage for endoscopic surgery |
| 37 | Oblique Lumber Interbody Fusion Device or Cage OLIF- The implant must be radiolucent Poly ether ether ketone.Should have Space for filling the bone graft.Should be self-distracting bullet shaped with Convex Shap designed to fit patient anatomy. Should be available in various lordotic options of 0-degree, 6 degree & 12 degree & Diameter start from 8mm to 16mm in increment of 2mm.Should have 5mm cage length in front of the cage markers which should be visible in AP x-ray view.Should be available in different lengths 40mm, 45mm, 50mm, 55mm & 60mm.Should have an anterior nose head of 5mm for easier insertion. Should be an impacted cage system compatible with minimally access technique.Should be able to undergo orthogonal manoeuvres. |
| 38 | Kyphoplasty kit The kit should be available in following set* The kit should be pre-sterile.* Should have working cannulas with inner diameter 3.2mm or less outer diameter 4.2mm or more with calibration along with cannulated obturator.* Should have calibrated Drill with cm/mm marking on proximal end.* Should have digital battery-operated inflation syringe to inflate balloon showing pressure in PSI & ATM, inflation time and volume of cavity created in vertebral body.* The inflatable balloon tamps size - 10/3,15/3,20/, (either size) should be capable to bear pressure of 400 psi or more to elevate vertebral body.* The bone filling device should be calibrated and should contain minimum 1.5cc of volume.* Should have curette for scrapping bone in old V C with variable angles 30,60,90 degree to create cavity in vertebral body.* The biopsy needle should have cm marking on proximal side to take adequate bone biopsy.* Minimally invasive, percutaneous, Balloon Kyphoplasty system for stabilizing VCFs* Anterior radio-opaque marker on balloon tamp should mark the anterior edge of the balloon.* System components should be available individually as well as in kit form including the following instruments.* Should be supplied with green high viscosity VTP cement.* Kit should have the following:* 2 units of 11-gauge bone access needle* 1 introducer kit including* Introducer with extra cannula* Drill with drill tip* At least 4 guide pins* 2 balloon tamps* 2 digital balloon inflators* 6 bone filler |
| 39 | vertebroplasty kit The kit should be available in following set* The kit should be pre-sterile.* Should have working cannulas with inner diameter 3.2mm or less outer diameter 4.2mm or more with calibration along with cannulated obturator.* Should have calibrated Drill with cm/mm marking on proximal end.* The bone filling device should be calibrated and should contain minimum 1.5cc of volume.* Should have curette for scrapping bone in old V C with variable angles 30,60,90 degree to create cavity in vertebral body.* The biopsy needle should have cm marking on proximal side to take adequate bone biopsy.* System components should be available individually as well as in kit form including the following instruments.* Should be supplied with green high viscosity VTP cement.* Kit should have the following:* 2 units of 11-gauge bone access needle* 1 introducer kit including* Introducer with extra cannula* Drill with drill tip* At least 4 guide pins* 6 bone filler |
| 40 | Multilevel Percutaneous Pedicle Screw Fixation for Thoraco Lumbo - Sacral Fixation. * The system should be available for demonstration as per the requirement of user department.* The firms quoting should supply all above items* Minimally invasive multilevel percutaneous pedicle screw fixation system for thoracic as well lumbar fixation with capability of putting at least 8 screws percutaneously.* Compatible with separate incision technique for screws and rods.* The system should have capability of trauma, Degenerative and Deformity correction percutaneously.* System should have straight rod and it should have straight and prebended (lordosed and kyphosed) as per the anatomy of thoracic and lumber.* System should have the user-friendly instruments. System should have steerable rod inserter and reduction screw extenders.* The reduction screw extender should have large window at the base of the screw extenders.* Extenders should have capability of step wise reducing the rod on to the saddle of the screw* System should have cannulated instruments for ease of working on guide wires* Screw sleeves should have specific markers which enable surgeons to understand the reduction capabilities.* System should have free hand rod inserter instrument.* System should have for measuring and rod confirmation tool which help surgeon to check the insertion of the rods on to the screws percutaneously.* System should provide unique method of compression and distraction, rod approximation and rod rotation (Through the percutaneous route)* System should allow gradual dilation to minimize muscle trauma, fascia disruption and blood loss.* System should be compatible with both mono and multi axial screws capabilities.* The screws should have reverse threaded technology to reduce pullout strength* The implant should have top loading, top tightening and most importantly reverse thread technology with Breakoff plugs.* System should have cannulated Mono and Multi-axial screws with angulation of 28 degree and should be available in self tapping screws 4.5,5.5,6.5,7.5mm diameter and length 25mm -60mm at the increment of 5mm* Should be compatible for use with fenestrated screws for augmenting vertebral bodies with cement.* System should be compatible with 5.5mm rod* System should work with Jamshidi needle.System should have following Component |
| 41 | a) Pedicle Screw |
| 42 | b) Rod |
| 43 | Hydroxyapatite (HA) coated pedicle screws * Hydroxyapatite Coated Open Ended Reverse Thread Top Loading Top Tightening Fixed Angle pedicular screws (assorted size) 4.5mm, 5.5mm, 6.5mm with length 30mm-50mm at the increment of 5mm with break off type of Plug with G4 reverse thread technology* Hydroxyapatite Coated Open Ended Reverse Thread Top Loading Top Tightening Multi-axial pedicular Screws (assorted size) 4.5mm, 5.5mm, 6.5mm and should be available in length 30mm-50mm at increment of 5mm.* Compatible with vertebral column manipulation and vertebral body rotation instruments for deformity correction.* Universal system can be use anterior as well as posterior TL spine* Should ideally be use for Osteoporotic Vertebra/bore* Osteofill surface area of the screws threads should be coated with Hydroxyapatite material.* Should be available in pre-sterile packs.* All the implants must be registered with DGCI.System should be available in following component |
| 44 | a) Pedicle Screw |
| 45 | b) Rod |
| 46 | Pedicle screw system with cobalt chrome Multiaxial Head -System should have OSTEOGRIP dual lead thread pattern with a tapered tip for enhanced fixation at the bone implant interface, better closure mechanism.-System implant should be equipped with implant tracking system technology & provide device quality and utilization related data.-Factory calibrated navigated top loading scree with cobalt chrome tulip head for strong fixation & low profile to treat trauma, tumor& degenerative pathologies.-System should be able to accommodate multiple rod material option. - system should be compatible with enabling technology which is installed in organisation. -System should be compatible with 4.5mm to 5.5mm rod.-System should have option for Titanium monoaxial screw & hooks to be used 4.5mm & 5.5mm rod.-System should have colour coding for easy to use.-System should have ergonomically designed instruments. |
| 47 | a) Pedicle Screw |
| 48 | b) Rod |
| 49 | Percutaneous Pedicle Screw fixation system with Dual thread Technology with cobalt chrome Multiaxial Head- The system should single & multiple level capability. The system should have Polyaxial/ Monoaxial screw with top loading locking mechanism. Implants should be cannulated poly axial with 4.5, 5.5 & 6.5mm Dia screw for percutaneous thoracolumbar fixation with break off set screw. System should have rod option for precut & prebend & straight of different sizes.System should have free hand rod inserter instruments. System should have for measuring & rod confirmation tool which help to surgeon to check the insertion of the rod on to the screw percutaneously.System should provide unique method of compression & distraction. - system should be compatible with enabling technology which is installed in organisation. - System should have cannulated instruments for ease of working on guide wire.The system should have reverse threaded technology to reduce pullout strength. Implants should be top loading, top tightening & most importantly reverse thread technology.System should compatible with 5.5mm Dia rod.System should be available for demonstration as per the requirement. Implant head should be made of Cobalt Chromium Material |
| 50 | a) Pedicle Screw |
| 51 | b) Rod |
| 52 | Fenestrated Percutaneous Pedicle Screw fixation system The system should single & multiple level capability. The system should have Polyaxial/ Monoaxial screw with top loading locking mechanism. Implants should be cannulated poly axial with 4.5, 5.5 & 6.5mm Dia screw for percutaneous thoracolumbar fixation with break off set screw. System should have rod option for precut & prebend & straight of different sizes.System should have free hand rod inserter instruments. System should have for measuring & rod confirmation tool which help to surgeon to check the insertion of the rod on to the screw percutaneously.System should provide unique method of compression & distraction. - system should be compatible with enabling technology which is installed in organisation. - System should have cannulated instruments for ease of working on guide wire.The system should have reverse threaded technology to reduce pullout strength. Implants should be top loading, top tightening & most importantly reverse thread technology.System should compatible with 5.5mm Dia rod.System should be available for demonstration as per the requirement. Implant head should be made of Cobalt Chromium Material.System should have option for Cement insertion system. |
| 53 | a) Pedicle Screw |
| 54 | b) Rod |
| 55 | Mini plates & screws * A plating system to offer Neurosurgeons a choice to do rigid fixations of craniotomies and other cranial procedures which should be Very low profile in nature and be a Complete system for a broad spectrum of cranial indications having following specifications technically -* A modular system having autoclave able module for instruments and implants* All plates are should be 0.5mm thick and implants should be offered in various shapes for an optimal and appropriate choice in the procedure these should include basic plates, frame plates, adaption plates-available in multi holes, burr hole covers, burr hole covers for shunt and mesh plates in various dimensions (both 0.4mm & 0.6mm should be available)* Temporal & mastoid region should have dedicated plates for use* Screw plate profile should be not more than 0.6mm for minimum palpability* Despite the minimum profile, the plate strength should be comparable to thicker cranial plates* The screws should be designed for hard cranial bones and should have a Plus Drive recess for Excellent screw retention in the shaft* The screws should have a Flat head and should be easy to pick up with a self-holding* The screws should have a selection in self-drilling and self-tapping types* Screw lengths should be available in 3-6mm* Emergency screws having different colour than regular screws* The screwdriver handle with hexagonal coupling long (66mm) and short (42mm) shafts which should be self-holding in nature and compatible with all screws in the system and also fit the handle instantly* Holding instrument for plates must be a part of the instrumentation* A special cutter for strut & mesh plates to be provided in the system* Appropriate 1.3mm drill bits of 4mm & 6mm depth having stops* Appropriate Label clips for the screws which should be replaceable.* If bulk order (20 plates or more) is placed screw driver must be supplied for department |
| 56 | a) two-hole mini plate with screws |
| 57 | b) multi hole mini plates with screws |
| 58 | Burr hole covers with screws * Burr hole covers profile should be not more than 0.6mm for minimum palpability* Despite the minimum profile, the Burr hole covers strength should be comparable to thicker cranial plates* The screws should be designed for hard cranial bones and should have a Plus Drive recess for Excellent screw retention in the shaft* The screws should have a Flat head and should be easy to pick up with a self-holding* The screws should have a selection in self-drilling and self-tapping types* Screw lengths should be available in 3-6mm |
| 59 | craniofix 2 titanium clamp |
| 60 | craniofix 2 titanium clamp a) size 11mm |
| 61 | craniofix 2 titanium clamp b)size 14mm |
| 62 | craniofix 2 titanium clamp c)size 16mm |
| 63 | craniofix absorbalble clamp sterile |
| 64 | craniofix absorbalble clamp sterile a) size 11mm |
| 65 | craniofix absorbalble clamp sterile b) size 14 mm |
| 66 | craniofix absorbalble clamp sterile c)size 16mm |
| 67 | VP shunt Fixed PressureVentriculo Peritoneal Shunt (equivalent to VP shunt by Surgiwear/Hindustan Latex Pvt Ltd.)- Low pressure |
| 68 | VP shunt Fixed PressureVentriculo Peritoneal Shunt (equivalent to VP shunt by Surgiwear/Hindustan Latex Pvt Ltd.)- Medium pressure |
| 69 | VP shunt Fixed PressureVentriculo Peritoneal Shunt (equivalent to VP shunt by Surgiwear/Hindustan Latex Pvt Ltd.)- High pressure |
| 70 | VP shunt Gravitational fixed pressure double chamber ventriculo-peritoneal shunt a) Low pressure |
| 71 | VP shunt Gravitational fixed pressure double chamber ventriculo-peritoneal shunt b) medium Pressure |
| 72 | VP shunt Gravitational fixed pressure double chamber ventriculo-peritoneal shunt c) High pressure |
| 73 | Adjustable Pressure Valves/Shunts (programmableshunt) * Should able to do non-invasive adjustment and also should not require x-ray confirmation* Should be Latex free* Should be MRI Compatible* Should have valve system with minimum 10 (Ten) settings.* Should have injectable reservoir dome* Should have distal and proximal occluders for selective flushing* Should be available with and w/o siphon control device (NON-Siphon Control)* Should have portable handheld Adjustment system and do not require an outside power source * Built in adjustment magnet and LCD read out screen in the handheld system* Confirmation from x-ray should be optional not mandatory* Should provide numeric interpretation (mm H2O) of the valve performance setting with included smart card* Should be powered by tow AA batteries* Programmable Non siphon control lumboperitoneal shunt kit should also be available* NSC LP valve should include integral lumbar connector and strain relief for easy, non-kinking attachment of the proximal lumber catheter.* Should have small inner lumen in peritoneal catheter in NSC LP shunt kit to preserve distal shunt resistance* Company main with magnetic control should available inKota or at least in Jaipur. |
| 74 | Omaya Reservoir Pudding type |
| 75 | Omaya Reservoir Pudding type with titanium chamber |
| 76 | Theco-peritoneal shunt . Theco-peritoneal shunt- Designed for shunting of CSF from lumbar sub-arachnoid space to peritoneal cavity - and should be made up of silicon rubber. |
| 77 | Theco-peritoneal Theco-peritoneal shunt- Designed for shunting of CSF from lumbar sub-arachnoid space to peritoneal cavity - and should be made up of titanium made gravitational double chamber shunt |
| 78 | Dainage system External Ventricular drainage system |
| 79 | Dainage system External Lumbar Drainage system |
| 80 | Dural graft implant (Absorbable Collagen matrix) * Should be Onlay dural graft,* Should be bioabsorbable,* Suturing / gluing should not be required,* Should be sterile. |
| 81 | a). Size 1x1\\" |
| 82 | b). Size 1x3\\" |
| 83 | c). Size 2x2\\" |
| 84 | d). Size 3 x 3\\" |
| 85 | e). Size 4 × 5 \\" |
| 86 | Fibrin glue Biological Fibrin glue with calcium chloride human protein Kit 2 ml |
| 87 | Fibrin glue Biological Fibrin glue with synthetic aprotinin Kit 2 ml |
| 88 | Flowable haemostate Absorbable Gelatine based topical flowable haemostate with prefilled Syringe. |
| 89 | Bone Cement -Synthetic PMMA & hydroxyapatite combine with osteoconductivity. -Should be 50% hydroxyapatite in the powder component. -Should be long working time & low exothermicity.-Should be in sterile packing. -Should be used for cranioplasty and other |
| 90 | Recharge free implantable sacral neuro stimulator (MRI compatible): Single - channel implantable sacral neurostimulator for use with MRI compatible tined leads, and patient programmer, Full body MRI compatible & should be compatible with constant current. Advanced programming features for patients and clinicians. · Full Body MRI Compatible with 1.5T and 3T machines· 7 distinct programs with 4 custom options· Smart patient hand held programmer· MRI mode should be available on the programmer· Electrode configuration 4 lead electrodes as anode (+), cathode (-), or off. 1 case electrode as anode (+) or off · Amplitude 0 to 12.5 mA (0.1 mA increment) · Rate range: 3 to 130 Hz · Pulse width 40 to 450 μs (10 μs increment) · Cycling Off, On: 2 s to 24 hrs Soft Start/Stop Off, On: 1, 2, 4, 8, 15, or 30 second ramp durationPhysical characteristics of the neurostimulator should be maximum of, · Height 44 mm (1.7 in) · Length 51 mm (2 in) · Thickness 7.7 mm (0.3 in) · Weight 22 g (0.77 oz) · Volume 12.5 cm3 (0.76 in3 ) · Surface area 47.3 cm2 (7.33 in2 ) · Materials and substances to which the patient can be exposed b c d e f Titanium, polyurethane, silicone, silicone medical adhesive · Power source 1.2 Amp Hours, 3.2 V Lithium, fluorinated carbon – silver vanadium oxide hybrid · Expected lifetime 10.2 |
| 91 | Spinal cord stimulation Implants: Implantable neurostimulation system is indicated for spinal cord stimulation (SCS) as an aid in the management of chronic, intractable pain of the trunk and/or limbs - including unilateral or bilateral pain.· Fully implantable spinal cord neurostimulator· ~1 hour recharge — empty to full (approximate time)· Technology automatically adjusts the therapy as your patient moves, delivering a personalized treatment based on seven unique body positions.· physicians to objectively monitor a patient's progress.· Ergonomic features: ü Weight : approx.29.1g (1.0oz)ü Height : approx. 57.1mm (2.2in)ü Width: approx. 47.2mm (1.9in)ü Battery Type : Rechargeableü Volume : approx. 13.9 cc· technology should be optimized for the increased energy demands of HD therapies. · Technology should give patients the broadest access to MRI* because it allows MRI scans anywhere on the body, under certain conditions. · >95% battery capacity retained at 9 years, independent of therapy parameters or recharge preferences· Ability to recharge a completely discharged device using recharger.· Easy-to-adjust therapy using programmer.· Easy-to-read interface |
| 92 | Intrathecal Programmable Pump : ITP is implantable infusion system delivers drug directly into the intrathecal space, thereby bypassing the blood-brain barrier. As a result, only a fraction of the oral dose is needed to eliminate systemic opioids, sustain pain relief produce efficacy while minimizing systemic side effects.Features: Pump should Offer in two sizes (20 mL or 40 mL) to create efficient refill intervals.Powerful long-lasting durability with diamond-like carbon coating that resists the wear from gear revolutionsDesigned to last up to seven years at up to 0.9 mL/day flow rate±0.3% repeatability — each pump precisely delivers a reliable and consistent amount of drug‡Allows safe full-body access to 1.5- and 3.0-Tesla MRI. The pump must be designed to resume programmed therapy after the scan and does not need to be emptied prior to a scan, minimizing drug waste and procedural steps.Pump has Catheter access port, Catheter port, Suture loop, Reservoir fill port.The pump should be programmed to vary the amount of medication up to 13 different times throughout a day.Programming can also vary from day to day.The pump should store important data about the device and settings, so it is not needed to carry records if patient travels or change clinics.the information should be accessible with a clinician programming device.The pump should allow for full body MRI scans under specific conditions. |
| 93 | Dural Patch Dural Patch (equivalent to G patch of surgiwear)-* Should be made up of material poly-L-lactic acid to provide thebiocompatibility & non toxicity.* Should be hydrophobic to provide water light barrier for the prevention ofCSF leakage.* Should provide the bio mimetic structure which resembles to themicrostructure of native dural matrix, providing an appropriate environmentfor dural cell growth.* Should be Absorbable within 6 months.* Should be sutured and onlay on to the dural defect.* Should be available as pre sterilised by Gama Radiation.* Thickness should be from 0.1-0.5 mm.* Should be available in sizes in mm as |
| 94 | 15x20mm |
| 95 | 25x25mm |
| 96 | 20x30mm |
| 97 | 30x40mm |
| 98 | 40x60mm |
| 99 | 60x60mm |
| 100 | 60x80mm |
| 101 | 75x25mm |
| 102 | 75x75mm |
| 103 | 100x125mm |
| 104 | Nasal packing Polyvinyl alcohol Nasal packing with thread -equivalent to Merocell of medtronics/ ULTRACELL MEDLINE/ ABSORBENT INNOVIA |
| 105 | Dye Indocyanine green dye- 20 ml |
| 106 | Dye Indocyanine green dye- 50 ml |
| 107 | Dye 5 amino levulanic acid -20 ml |
| 108 | Dye 5 amino levulanic acid -50 ml |
| 109 | Bipolar cable Bipolar cable: Compatible with Alan made cautery |
| 110 | Bipolar cable Bipolar cable: compatible with Storz endoscopy cautery |
| 111 | Bipolar cable: Bipolar cable: compatible with Shalya made cautery |
| 112 | Bipolar forceps Bipolar forceps non sticky tip bayonet / straight : Compatible with Alan made cautery |
| 113 | Bipolar forceps Bipolar forceps non sticky tip bayonet / straight : compatible with Storz endoscopy cautery |
| 114 | Bipolar forceps Bipolar forceps non sticky tip bayonet / straight:compatible with Shalya made cautery |
| 115 | Shunt passer Subcutaneous ventriculo peritoneal shunt passer (paediatric) |
| 116 | Shunt passer Subcutaneous ventriculo peritoneal shunt passer (adult) |
| 117 | Microscope cover Disposable Microscope cover for Pentero 900 |
| 118 | c- arm cover Disposable c- arm cover for allenger and kiran made |
| 119 | OT shoes Autoclaveble OT shoes |
| 120 | Drapes Antimicrobial / iodofor impregnated drapes of various sizes |
| 121 | Balloon catheter Fogarty’s balloon catheter for endoscopic third ventriculostomy -4 Fr/ 5 Fr |
| 122 | Dural closure clip system Non-Penetrating Titanium Microvascular & Dural Closure Clip System (equivalent to the LeMaitre AnastoClip VCS/GC system)Material: Non-ferromagnetic, medical-grade implantable pure titanium or equivalent inert alloy compatible with post-operative MRI (up to 3.0T) and CT imaging without significant scatter artifacts.Mechanism of Action: Non-penetrating, arcuate-legged/flanged clip design engineered to approximate symmetrically everted tissue edges without piercing the luminal or inner intimal/endothelial surface.Tissue Retention: Micro-serrated or textured inner gripping surface providing secure tissue approximation and resistance against dislodgement under arterial pulsation or intradural pressure.Configuration: Single-use, disposable hand-held applicator preloaded with an integrated multi-clip cartridge.Capacity:Minimum 25 to 40 preloaded clips per applier (depending on clip size).Deployment Mechanism: Automatic advance and reload of consecutive clips upon release of the hand lever.Feedback: Discernible tactile and/or audible click confirming full jaw compression and complete clip formation.Maneuverability: 360-degree continuously rotating shaft or tip nozzle for micro-surgical access in deep or narrow cavities.Shaft Lengths: Standard open and extended/deep cavity lengthTissue Everting Forceps:High-grade surgical stainless steel or titanium, fully autoclavable and corrosion-resistant.Specifically designed atraumatic tips capable of outward tissue eversion without shearing vessel walls or dura.Working length: 15 cm to 18 cm.Clip Extractor / Remover |
| 123 | Aneurysm Clip (Sugita type / yasargil type) Should be made up of Titanium/MRI Compatible Material.i. Sugita typeii. Made of titanium or MRI compatible materialiii. Both temporary and permanent typeiv. Fenestrated/ non fenestratedv. In various shapes straight/ up curve/down curve/bayonet type/ right angle bent/ 45 angled/ lateral bentvi. Sizes mini/ 5mm/6mm/7mm/8mm/ 9 mm/10 mm/ 12 mm in each shape and type mentioned abovevii. With clip applicators availability for both permanent and temporary clips of variable sizes at the time of surgery |
| 124 | CUSHING DURAL HOOK 140mm |
| 125 | GRUENWALD FORCEPS BAYONET SHAPE, - 7\\" T.C. TIP |
| 126 | MAYO HEGARS NEEDLE HOLDERS 200mm |
| 127 | HEGAR NEEDLE HOLDER WITHGROOVE 20CM |
| 128 | BRAIN CANNULA 8MM |
| 129 | BRAIN CANNULA 10MM |
| 130 | MAYOS SCISSORS CD. 160mm |
| 131 | GERALD DRESSING FORCEPS BAYONETPLAIN 190mm |
| 132 | YASARGIL MICRO SCISSORSTRAIGHT 185mm |
| 133 | JACOBSON MICRO SCISSORCURVED 185mm |
| 134 | POTTS-YASARGIL MICRO SCISSOR ANGLED 45 DEG, 185mm |
| 135 | MICRO SUTURE TYING FORCEPS STRAIGHT TIP 0.3mm x 150mm |
| 136 | MICRO SUTURE TYING FORCEPS CURVED TIP 0.3mm x 150mm |
| 137 | MICRO SUTURE TYING FORCEPS ST.TIP 0.5mm x 180mm |
| 138 | MICRO NEEDLE HOLDER WITH CATCHSTRAIGHT 185mm |
| 139 | YASARGIL LIGATURE GUIDE & CARRIER BALL TIPPED CURVED 185MM |
| 140 | YASARGIL MICRO RASPATORY MICRODISSECTOR ANGLED 185mm |
| 141 | DANDY SCALP HAEMOSTATIC FORCEPSCURVED 140mm |
| 142 | CUSHING DISSECTING FORCEPS BAYONETSHAPE PLAIN 180mm |
| 143 | HALSTED MOSQUITO ARTERY FORCEPS CD. 125mm |
| 144 | ADSON CEREBELLER RETRACTOR SHARP,ANGLED 180mm |
| 145 | ADSONS DISSECTING FORCEPS PLAIN 125mm |
| 146 | ADSONS DISSECTING FORCEPS TOOTHED 125mm |
| 147 | ADSONS DISSECTING FORCEPS TOOTHED 150mm |
| 148 | CUSHING DISSECTING FORCEPS BAYONETSHAPE TOOTHED 200mm |
| 149 | WULLSTIEN S/R RETRACTOR3 X 3 PRONGS BLUNT SISCO 13CM |
| 150 | RUSKIN BONE RONGUERS D/A CD. 4mm x185mm |
| 151 | PENFIELD DISSECTOR DOUBLE ENDED 175mm 1,2,3,4 no. |
| 152 | SCHIMIDER TAYLOR SCISSOR 16CM |
| 153 | MALLEABLE BRAIN RETRACTOR of various sizes |
| 154 | Disc Forceps in various sizes |
| 155 | Bone Punches (Ronguers) of various sizes |
| 156 | GILLIES TISSUE FORCEPS 1x2 TEETH 150mm |
| 157 | MICRO ADSONS DISSECTING FORCEPSTOOTHED 180mm |
| 158 | YASARGIL MICRO SCISSORSTRAIGHT 225mm |
| 159 | YASARGIL MICRO SCISSOR BAYONET/STRAIGHT 165mm |
| 160 | JACOBSON MICRO PROBE WITH BALLTIP (COUNTER PRESSER) 185mm |
| 161 | CLOWARD CERVICAL VERTEBRA SPREADER |
| 162 | CLOWARD LARGE CERVICAL RETRACTORSET OF 10 BLADES 255mm |
| 163 | MAYO HEGAR NEEDLE HOLDER T/C TIP 150mm |
| 164 | TOENNIS-ADSON SCISSORS TC TIPCD. 175mm |
| 165 | METZENBAUM SCISSORS TC TIP ST 200mm |
| 166 | COTTLE CHISEL 4mm x 180mm |
| 167 | LANDOLT TUMOUR GRASPING FORCEPSBLUNT SHAFT 200mm |
| 168 | CASPAR LONGUS COLLI MUSCLEDISSECTOR 175mm |
| 169 | FARAZIER DURAL HOOK 5'' |
| 170 | Suction canula set of four, No. 1,2,3,4 |
| 171 | Scalpal handle bayonet shape 210mm 8.50 inch |
| 172 | Cairns neuro scissors |
| 173 | ListonBone cutting Forceps 275 mm curved on flat |
| 174 | Hartman crocodile brain biopsy forceps 175mm |
| 175 | Hartman crocodile brain biopsy forceps 250mm |
| 176 | Adson self retaining retractor blunt 330mm |
| 177 | Miskimon cerebellar retractor |
| 178 | Harvey jackson laminectomy retractor hined arms blade 1.5\\" wide ;1.75\\" deep ;Length 290mm |
| 179 | Kilner Needle Holder Box Joint 0.4mm ;5\\" length TC jaws Gold plated |
| 180 | Auto clavable s.steel drum's 15\\"x12\\" |
| 181 | Auto clavable s.s tray with LID for microsurgical ins. with Silicone matt. |
| 182 | Auto clavable s.steel tray with LID 12\\"x18\\" |
| 183 | Schlesinger IVD Rongeur, Size :- 152 mm shaft :,cup 2x10mm |
| 184 | Schlesinger IVD Rongeur, Size :- 152 mm shaft:, cup 3x10mm |
| 185 | Schlesinger IVD Rongeur, Size :- 152 mm shaft :,cup 4x10mm |
| 186 | Hardy kerrision punch , Size :- 1mm, 40degree up’’ Length |
| 187 | Cervical kerrision thin plate Size :- 40º degree up, 2mm, 7’’ length Gold screw |
| 188 | Lumbar kerrision Rongeur Size :- 40º degree up, 3mm, 8’’ Length |
| 189 | Lumbar Kerrison Rongerur Hardy style Handle with Ball spring 40º up 8’’ Length |
| 190 | Stille Leur Rongeur Curved Bite, 5mm Length 229mm |
| 191 | Stille Leur Rongeur curved Bite, 10 mm, Length 216 mm |
| 192 | Vertebral body spreader with ratchet lock length – 127mm |
| 193 | Mayo Hegar needle holder length – 7’’ TC Inserts |
| 194 | Adson dural needle holder fenestrated jaws , length -181mm |
| 195 | Long artery forceps |
| 196 | Cheatle forceps |
| 197 | Tongue depressor |
| 198 | Catspaw retractor |
| 199 | Markham – meyerding hemilaminectomy retractor of various sizes |
| 200 | Mayo table |
| 201 | Yasargil arachnoid knife |
| 202 | Yasargil biopsy forcep |
| 203 | Toothed dissecting forceps |
| 204 | Wooden handle dissector |
| 205 | Leyla retractor system Flexible Arm with table stand with connector spatula |
| 206 | Electrical Drill (MANMAN) Craniotome & Perforator Electrical Drill (MANMAN) Craniotome & Perforator |
| 207 | Craniotome cutter blade |
| 208 | Craniotome hand piece |
| 209 | Craniotome cutter hand piece |
| 210 | Shaft for Craniotome |
| 211 | Reusable Perforator 10/12/14mm burr |
| 212 | Manman Motor with stand and cable |
| 213 | Disposable items for RFTA machine compatible with Inomed made model |
| 214 | patient plate with wire |
| 215 | RF Reusable electrode 10 cm with wire |
| 216 | RF Disposable Cannula 10 cm long , 10mm Tip, 22G |
| 217 | RF Disposable Cannula 10 cm long , 5mm Tip, 22G |
| 218 | RF Disposable Cannula 10 cm long , 10mm Tip, 20G |
| 219 | RF Disposable Cannula 10 cm long , 5mm Tip, 20G |
| 220 | RF Disposable Cannula 5 cm long , 4mm Tip, 22G |
| 221 | RF Disposable Cannula 15 cm long , 10mm Tip, 20G |
| 222 | RF Reusable electrode 15 cm with wire |
| 223 | RF Reusable electrode 5 cm with wire |
| 224 | Disposable items for Electric high speed drill Stryker made |
| 225 | PERFORATOR BIT |
| 226 | Cutting bur 1mm |
| 227 | Cutting Bur 2mm |
| 228 | Cutting bur 3mm |
| 229 | Cutting bur 4mm |
| 230 | Cutting bur 5mm |
| 231 | Cutting bur 6mm |
| 232 | ROUND DIAMOND BUR 1.0MM |
| 233 | ROUND DIAMOND BUR 2.0MM |
| 234 | ROUND DIAMOND BUR 3.0MM |
| 235 | ROUND DIAMOND BUR 4.0MM |
| 236 | ROUND DIAMOND BUR 5.0MM |
| 237 | ROUND DIAMOND BUR 6.0MM |
| 238 | FA2 2.3MM TAPERED ROUTER 16MM |
| 239 | CORE ESSX/HUMMER IRRIGAT. CAS. |
| 240 | 4.0MM 60 DEG. AGG SERR BLADE |
| 241 | 4.0MM CONVEX ANGLED AGGRESSIVE |
| 242 | 4.0MM ANGLED AGGRESSIVE BLADE |
| 243 | 4.0MM AGGRESSIVE SERRATED |
| 244 | 4.0MM AGGRESSIVE BLADE 11CM |
| 245 | 4.0MM 40 DEG. AGG SERR BLADE |
| 246 | Disposable items for Electric high speed drill Medtronics made |
| 247 | PERFORATOR BIT |
| 248 | Cutting bur 1mm |
| 249 | Cutting Bur 2mm |
| 250 | Cutting bur 3mm |
| 251 | Cutting bur 4mm |
| 252 | Cutting bur 5mm |
| 253 | Cutting bur 6mm |
| 254 | ROUND DIAMOND BUR 1.0MM |
| 255 | ROUND DIAMOND BUR 2.0MM |
| 256 | ROUND DIAMOND BUR 3.0MM |
| 257 | ROUND DIAMOND BUR 4.0MM |
| 258 | ROUND DIAMOND BUR 5.0MM |
| 259 | ROUND DIAMOND BUR 6.0MM |
| 260 | FA2 2.3MM TAPERED ROUTER 16MM |
| 261 | CORE ESSX/HUMMER IRRIGAT. CAS. |
| 262 | 4.0MM 60 DEG. AGG SERR BLADE |
| 263 | 4.0MM CONVEX ANGLED AGGRESSIVE |
| 264 | 4.0MM ANGLED AGGRESSIVE BLADE |
| 265 | 4.0MM AGGRESSIVE SERRATED |
| 266 | 4.0MM AGGRESSIVE BLADE 11CM |
| 267 | 4.0MM 40 DEG. AGG SERR BLADE Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 29, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 11 daysOct 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender