Tender For Cproviding And Fixing Aluminium Partition, Door, Windows And Other Repair Works In Uda Jurisdiction. 4811
Tender Value
16.45 Lakhs
Estimated cost
Bid Submission
22 Oct 2026
22 days left
EMD
32900
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Udaipur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Cproviding And Fixing Aluminium Partition, Door, Windows And Other Repair Works In Uda Jurisdiction. 4811
BOQ
| Sl. No. | Item Description |
| 1 | Item Code [12.40.1]:Item Type [building] :: 12.40 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding:Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect |
| 2 | Item Code [2022 1.8 EW]:Item Type [building] :: Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils |
| 3 | Item Code [2022 12.22.1 Putty]:Item Type [building] :: Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete. New Plastered Surface (three or more coats) |
| 4 | Item Code [2022 12.46.1]:Item Type [building] :: Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coat on new work |
| 5 | Item Code [2022 3.1.2]:Item Type [building] :: Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level.M15 grade Nominal Mix 1: 2: 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). |
| 6 | Item Code [2022 9.8 gate & grating]:Item Type [building] :: Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide |
| 7 | Item Code [2022 9.8.1 ]:Item Type [building] :: Extra if square,rectangular hollow tubelar sections are used or grill made by flats only |
| 8 | Item Code [2022 GI roofing 10.1]:Item Type [building] :: Sub Item Code [2022 GI roofing 10.1 + 10.1.1]: Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape whenever required. 1.00 mm thick with zinc coating not less than 275 gm/m2 |
| 9 | Item Code [8.7(b) Toughened glass 2022]:Item Type [building] :: Extra for providing toughened glass panes instead of ordinary float glass panes in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured). |
| 10 | Item Code [BBSR2022 16.4.2]:Item Type [building] :: Providing and fixing 12 mm thick prelaminated three layer medium density exterior grade particle board Grade I, Type II conforming to IS 12823 bonded formaldehyde synthetic resin ,of approved brand and manufacture in paneling fixed in aluminium doors ,windows shutters and partition frames with C.P. brass stainless steel screws etc. complete as per architectural drawings and direction of engineer in charge.Prelaminated particle board with decorative lamination on both sides. |
| 11 | Item Code [BSR 2022-12.3.1]:Item Type [building] ::Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish : Sub Item Code [BSR 2022-12.3.1 + 12.3.1]: Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish : 25 mm thick |
| 12 | Item Code [BSR2022 13.4.2]:Item Type [building] :: Renewing glass panes,with putty and nails wherever necessary . Float glass panes of thickness 5 mm . |
| 13 | Item Code [BSR2022 16.1.1.1 ]:Item Type [building] :: Providing and fixing aluminum work for doors ,windows, ventilators and partition with extruded built up standard tubular appropriate Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing paneling , C.P. brass stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and the directions of Engineer- in charge .Glazing and paneling to be paid for separately. For fixed portionAnodised aluminum anodised transparent 81 dyed to required shade according to IS 1868. Minimum anodic coating of grade AC 15, Anodizing to be got done from approved Anodizer |
| 14 | Item Code [BSR2022 16.1.2.1]:Item Type [building] :: Providing and fixing aluminum work for doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and the directions of Engineer- in – charge .(Glazing and paneling to be paid for separately).For shutters builtup standard tubular sections of openable doors ,windows & ventilators including providing & fixing hinges / rollers etc. and making provision for fixing of fittings wherever required (lockes shall be paid for separately).Anodised aluminum (anodised transparent 81 dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC 15, Anodizing to be got done from approved Anodizer) |
| 15 | Item Code [BSR2022 16.10]:Item Type [building] :: Sub Item Code [BSR2022 16.10 + 16.10.1]: Providing and fixing expanded grill made of aluminum as per design and drawing having members section of size 7.5mm x 6.0mm and opening of size 102mm x 99mm to aluminum window/vent with required screws, Y and H aluminium section (as per drawing) at the ends and middle joints respectively complete in all respect as per direction of engineer in charge. Anodised aluminum (anodised transparent 81 dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC 15, Anodizing to be got done from approved Anodizer) |
| 16 | Item Code [BSR2022 16.11]:Item Type [building] :: S&f fixed wire gauge of stainless steel of 14 mesh x 24 gauge to the aluminium window by Aluminium beading 20x3mm with suitable screws not exceeding 150mm distance at all heights with all lead and lift with scafolding. |
| 17 | Item Code [BSR2022 16.5.2]:Item Type [building] :: Providing and fixing glazing in aluminium door, window ,ventilator shutters and partitions etc. with PVS / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(Cost of aluminium snap beading shall be paid in basic item.) With float glass panes of 5.0 mm thickness ( weight not less than 13.50 kg/sqm). |
| 18 | Item Code [BSR2022 8.27]:Item Type [building] :: Providing and fixing IS : 3564 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc. complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 22 daysOct 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender