Tender For Provn Of Pathway At Ra Bazar Fafa (Jcos) Accn And Fencing Cum View Cutter In Bldg No 9A Hm Marg Shed And Hardstanding At Bldg No 10 Joggers Park Under Ge East Lucknow
Tender Value
25.43 Lakhs
Estimated cost
Bid Submission
20 Oct 2026
16 days left
EMD
50860
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Pathway At Ra Bazar Fafa (Jcos) Accn And Fencing Cum View Cutter In Bldg No 9A Hm Marg Shed And Hardstanding At Bldg No 10 Joggers Park Under Ge East Lucknow
BOQ
| Sl. No. | Item Description |
| 1 | M & L for hard core free from dust and vegetation of gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed. |
| 2 | M & L for 100mm thick cement concrete 1:3:6 type C-2 (using 40 mm grade crushed stone aggregate) as in sub floor, sub base of floor complete all as specified and directed. |
| 3 | M & L for 80 mm thick, M-40 grade machine pressed pre-cast concrete interlocking moulded paver block confirming to IS 15658-2006 with grey cement and pigment in any shape and size, laid dry over sand cushioning complete all as specified and directed. Note : Sand shall be measured shall be and paid separately. |
| 4 | M&L for river sand free from dust & vegetation for filling under paver blocks or filling in floors or foundations including watering and consolidation complete all as specified and directed. |
| 5 | M & L for laying at or near ground level factory made precast of required shape kerb stone of M-25 grade cement concrete fair & smooth coloured used using best quality pigment in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. |
| 6 | M&L for cement concrete 1:3:6 type C 2 using 40 mm graded crushed stone aggregate as in foundations filling, sub base and mass concrete filling, etc complete all as specified and directed |
| 7 | M & L brick work with fly ash bricks, straight or curved on plan exc 6M mean radius, old size brick built in cement mortar 1:6 complete all as specified and as directed. |
| 8 | M & L 15mm thick rendering on any faces of brick work or concrete surface in CM 1:4 finished even and fair without using extra cement complete all as specified and directed |
| 9 | M&L for cement concrete type B-1 1:2:4 as in copings, kneelers, apex stones, bed plates, kerbs haunching and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed |
| 10 | M&L for two coats of cement base paint over a coat of primer on new plastered surfaces of walls including preparation of surfaces all as specified and directed. |
| 11 | S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified. |
| 12 | M & L preparation of new steel surfaces of any description exc 10 cm width or girth and applying two coat of synthetic enamel paint over red oxide complete all as specified and directed. |
| 13 | S&F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 14 | Excavation in post holes (or similar holes) each not exc. 0.50 Cum, getting out, returning, filling and ramming earth or broken rubble mixed with earth around in layers not exc. 25 cm watering and removing surplus soil to a distance not exc. 50 m and making good surface as in hard / dense soil complete all as specified and directed. |
| 15 | Supply only 3 mm dia GI wire chain link fencing of any size or any type but weight not less than 2.2kg/sqm complete all as specified and directed. |
| 16 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and as directed. |
| 17 | S&F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed. |
| 18 | S&F mild steel angles/flat iron as in fencing post and struts including embeeded in concrete and screwing etc including securing bolts, cutting tops to shape as directed, drilling holes notching for wire, etc complete all as spficied Fe 290 Gde E-165, complete all as specified and directed. |
| 19 | S&F powder coated(min thickness of powder coating 50 micron) anodised aluminum window shutter three track sliding type, section having frame size bottom with outer 92x45.5x1.5mm (section code 20617) , top and side 92x31.75x1.5 (section code 20831) & aluminum section of shutter top and bottom size 40 x 18 x 1.5 ( section code 20736) , interlock size 40 x 18x 1.45 (section code 20737), side/ middle size 40 x18 x1.55, (section code 20738) including necessary joining cleats, glazing clips rubber backing, anodised aluminum snap beading screw, anodised aluminum fitting complete as per site requirtement glazing by using 5mm thick plain sheet glass and ss wiremess of dia 0.36mm and aperture 1.4mm thick all as specified and directed.Note- 1. Glazed shutter glass thickness not less than 5mm and ss wiremess shutter with ss wiremesh as approved by GE is also included. No payment will be made separately.2. No extra payment will be made for section profiles of higher sizes. |
| 20 | S & F Vanity cabinet with china table top wash basinsof size 900x500x800 mm with CP bottle trap with CP waste coupling and single hole hot and cold arrangement basin mixture etc with side walss and shelfs made of WPC board etc all as per specified by Engineer-in-charge. |
| 21 | S&F PVC connection 450 mm long suitable for 15 mm bore GI pipe including CP brass nuts on both sides, complete all as specified & directed. |
| 22 | S&F in repairs CP angle valve, fancy type long body for 15 mm bore pipe with capstan head long screwed shank including cp cover plate complete all as specified & directed. |
| 23 | Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and directed |
| 24 | M & L for hard core of gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken bricks complete all as specified and directed. |
| 25 | M & L for providing 75mm thick cement concrete 1:4:8 type D-2 (using 40 mm grade stone aggregate) as in sub floor, sub base of floor finished even and rough complete all as specified and directed. |
| 26 | M & L for chequered cement concrete tiles 30cm x 30cm x 25mm thick, set jointed and pointed in neat cement slurry, with mixture of white and grey cement in equal proportions and no pigments, laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 27 | M & L preparation of new steel surfaces of any description exc 10 cm width or girth and applying two coats of Black japan Paint complete all as specified and directed. |
| 28 | S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed. |
| 29 | S & F Coloured Polycarbonate Sheets 6mm thick (multi wall) as in roof covering/ cladding to wall, fixed with aluminum beading and old necessary mangies self tapping screws as specified Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysOct 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender