Tender For Proposed Construction Of Car Mandabam To Arulmigu Thirukatchi Nambigal And Varadharaja Perumal Thirukovil At Poonamallee Town And Taluk, Thiruvallur Distrct.
Tender Value
10.62 Lakhs
Estimated cost
Bid Submission
15 Oct 2026
8 days left
EMD
11000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvallur → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Proposed Construction Of Car Mandabam To Arulmigu Thirukatchi Nambigal And Varadharaja Perumal Thirukovil At Poonamallee Town And Taluk, Thiruvallur Distrct.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and il lift of and clearing and levelling the site, etc., complete complying with standard specification. |
| 2 | Supplying and filling in foundation, basement, etc with M.sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers. |
| 3 | Refilling with excavated earth other than sand with an initial head load of 100 mts. and depositing the earth as shown by the departmental officers in layers of not more than 15 cm thick well rammed, watered and consolidated etc. complete complying with standard specification. |
| 4 | Cement Concrete 1:5:10 (One Cement, Five sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, watered and consolidated etc. complete complying with standard specification. |
| 5 | Brick work in C.M 1:5, using Country bricks of size 8-3/4\\" x 4-1/4\\" x 2-3/4\\" including cost of materials and labour charges etc., complete complying with standard specification. Foundation and Basement |
| 6 | Brick work in C.M 1:6, using Country bricks of size 8-3/4\\" x 4-1/4\\" x 2-3/4\\" including cost of materials and labour charges etc., complete complying with standard specification. Ground Floor |
| 7 | In Ground Floor |
| 8 | Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid) Basement. |
| 9 | Supplying and erecting steel centering including necessary supports For plane surfaces such as rectangular or square RCC columns etc. which require only nominal strutting using mild steel sheets made of 10 gauge thick welded with MS angle size 40mm x 40mm x 5mm and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and Inner steel pipe with dia 40mm (2.90mm thick) etc. complete in all floors complying with standard specification. Steel Adjustable telescopic props shall be provided as directed by the departmental Officers. (Payment for centering shall be given after the concrete is laid) |
| 10 | Supplying and erecting centering for plane surfaces such as RCC Floor Slab, Roof Slab, Loft, Landing Slabs, etc with necessary supports and strutting upto 3.60m height in all floors with all cross bracings using MS Sheets made of 10 gauge thick welded with MS angle of Size 25mm x 25mm x 3mm for boarding laid over steel adjustable span of size 2m x 2m (expandable upto 3.60m) and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick), etc complete complying with standard specifications. Steel adjustable span and Steel Adjustable telescopic props shall be provided as directed by the departmental Officers. (Payment for certering shall be given after the concrete is laid) |
| 11 | Providing and laying in position, standarised concrete mix M20 Grade in accordance with IS: 456-2000, Using 20mm and downgraded hard broken granite stone jelly for all RCC items works with minimum cement content of 325kg/m3 maximum water cement ratio of 0.55, including admixture (plasticizer/super plasticizer) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5Cum) 7730kg of 20mm machine crushed stone jelly and with about (3.30cum) 5156kg of 10-12mm machine crushed stone jelly and with about (4.79cum)7670kg of sand but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing etc and providing fixtures like fan clamps in RCC floors/roof slab where ever necessary without claiming etc. complying with standard specification and as directed by departmental officers. The course and fine aggregates to be used should comply with requirements of IS standards (No separate payment will be made by the department for the excess usage of materials) |
| 12 | Foundation and Basement |
| 13 | For Ground Floor |
| 14 | Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. |
| 15 | Upto Plinth/Basement Level |
| 16 | Above Plinth/Basement Level |
| 17 | Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers. |
| 18 | Finishing the top of roof with one course of machine pressed tiles of size 200mm x 200mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers |
| 19 | Paving the floor with kota stone (unpolished) slab of following size in all floors laid over cement mortar bed of 20mm thick in of cement mortar 1:3 (one cement and three crushed stone sand), with required Cement Slurry and Mortar Plasticizer and pointed with colour cement neatly including polishing with polishing stone and oxalic acid etc., so as to perfectly smooth and glossy and including hire charges for polishing machine and power consumption charges etc.complete complying with standard speicification and as directed by the departmental officers. (The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work) |
| 20 | Supplying and fixing of push and pull type Rolling shutter confirming to IS 6248/1979 and as amended from time to time. With ISI make of approved size and section using 18 gauge G.I.sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of Hood covers, transportation charges etc., and as directed by Engineer incharge. |
| 21 | Supplying, fabricating and fixing in position anodised aluminum natural colour matt finish sliding window in all floors with sliding arrangements and gutter arrangement so as to drain the water entering and made with extended aluminum section of the sizes given below with necessary accessories such as rubber beading, best quality runner, lock, handle supplying and fixing 4 mm thick plain glass including cost of all materials, labour power consumption required for fabrication, drilling holes in RCC columns, floor slabs, masonry walls wherever necessary with power drills to the required extent and made same to original condition after fixing as directed. Sample materials of to be used should be got approved by the Engineer-in-charge. |
| 22 | Supply and Fixing MS Grill to doors, windows & Ventilators etc., using necessary MS flat for inner members and outer members which should be fixed to window members frames as directed by the departmental officers inclusive of cost of providing one coat of best quality red oxide primer (the design of MS grill should be got approved from departmental officers before there use in execution) |
| 23 | Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 24 | Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers. |
| 25 | Painting two coats to walls using best quality and brand of exterior emulsion paint over one priming coat as instructed by the departmental officers including preparation of surface curing, etc., complete in all floors complying with standard specifications (The colour and shade of the cement paint shall be got approved by the Executive Engineer before use of work). |
| 26 | White Washing one coat with freshly burnt white shell lime in all floors including cost of lime blue powder fevicol type, gum, brushes, scaffolding charges etc, complete. |
| 27 | White Washing two coats with freshly burnt white shell lime in all floors including cost of lime blue powder fevicol type, gum, brushes, scaffolding charges etc, complete. |
| 28 | Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over one coat of red oxide priming coat in all floors including cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 29 | Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of \\"U\\" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification. |
| 30 | Wiring with 2x1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe Concealed and ceiling with PVC accessoires in flush with wall with metal box and 6A 1way modular Switch in flush with wall with suitable modular front plate cover for making good of the for PVC Concelaed light point) (5 Points Per Coil) |
| 31 | Supply and fixing of 23W LED Round Surface type fitting with necessary accessories and electrical connections complete. (Make: ORSF 22W Orbit/Philips/Eql) |
| 32 | Supply and fixing of 4' 20W single LED Battery with LED complete on wall or ceiling with PVC unsheathed Copper leads from terminals to the fitting. |
| 33 | Supply and fixing of 1200mm (48\\") sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator (Higher end) with 600 mm down rod on the existing fan clamp. |
| 34 | Supply and fixing of 1 no 4 modular metal box with 1 no 4 modular plate. 1 no 16 A switch with Indicator, 1 no 16A socket, 1 No Dummy Switch in flush and making good of the concealed portion. (15A Plug) |
| 35 | Supply and fixing of 1 no 4 modular metal box with 1 no 4 modular plate. 1 no 5 A switch with Indicator, 1 no 5A socket, 1 No Dummy Switch in flush and making good of the concealed portion. (5A Plug) |
| 36 | Supply and fixing of 32A DP MCB in sheet steel enclosure box with electrical connections complete. |
| 37 | Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming and 12 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End |
| 38 | Supply and Run of 2 of 2.5 sq.mm. (36/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling or in existing duct with continuous earth wire connection of 2.5 sq.mm Copper wire with painting of suitable colour. |
| 39 | Supply and Run of 2 of 4 sq.mm. (36/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling or in existing duct with continuous earth wire connection of 4 sq.mm Copper wire with painting of suitable colour. |
| 40 | Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' Gl pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funnelling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry. |
| 41 | Sub Total |
| 42 | GST @ 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysOct 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender