Tender For Addition Alteration To Smqs In Kv Area At Afs Hasimara
Tender Value
43 Lakhs
Estimated cost
Bid Submission
20 Oct 2026
17 days left
EMD
86000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalpaiguri → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition Alteration To Smqs In Kv Area At Afs Hasimara
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver4.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority:GE (AF) HASIMARA Name of Work : ADDN/ALTN TO SMQS IN KV AREA AT AFS HASIMARA Contract No: GE/HAS/ /2026-27 Name of the Bidder/ Bidding Firm / Company : PRICE SCHEDULE 'A' (BoQ)(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of Item Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Taking down cement plaster of any description any thickness incl racking out joints hacking for keys scrubbing down with water etc, including removal of rubbish off the premises, complete all as specified and directed. |
| 3 | M & L for rendering 20mm thick in two coats (15mm under layer + 5mm top layer) on fair faces of brick work or concrete surfaces of wall in CM (1:4), mixed with water proofing compound on top layer as per manufacturer's instructions and finished the surface even and fair without using extra cement, complete all as specified and directed. (Note : WPC shall be measured and paid separately as 'supply only'.) |
| 4 | M&L for preparation of new plastered surfaces of wall, cornices etc and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of shade pattern (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm, complete all as specified and directed.Note :- (i) All coats including primer to be applied with fully automatic airless spray machine of paint application with a flow speed of minimum 1 ltr per minute having a pressure of 3300 PSI / Manual application Allow 6-8 hrs to dry the surface in subsequent coats of paint. |
| 5 | M&L for complete removal of existing treatment of old surfaces of wall, cornices etc and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of shade pattern (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm, complete all as specified and directed.Note :- (i) All coats including primer to be applied with fully automatic airless spray machine of paint application with a flow speed of minimum 1 ltr per minute having a pressure of 3300 PSI / Manual application Allow 6-8 hrs to dry the surface in subsequent coats of paint. |
| 6 | M&L for 15mm thick rendering in CM (1:6) on other than fair faces of brick work or concrete surfaces, finished surfaces even and smooth without using extra cement, complete all as specified and directed. |
| 7 | M&L for preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over and including a coat of 1.5mm thick (average) wall care putty and rubbing the surface with sand paper to obtain smooth surface before painting, complete all as specified and directed. |
| 8 | M&L for preparation of newly plastered surfaces of walls and applying three coats of white wash, complete all as specified and directed. |
| 9 | M&L for complete removal of existing treatment of old decorated surfaces of wall and applying two coats of oil bound distemper over and including 1.5mm thick (average) wall care putty and rubbing the surfaces with sand paper to obtain smooth finished surfaces before painting, complete all as specified and directed. |
| 10 | M&L for preparation of old decorated surfaces of wall and applying two coats of white wash, complete all as specified and directed. |
| 11 | M&L for 5mm thick rendering in CM (1:3) on ceiling surfaces finished even and smooth without using extra cement, complete all as specified and directed. |
| 12 | M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed. |
| 13 | M&L for preparation of old decorated surfaces of ceiling and applying two coats of white wash, complete all as specified and directed. |
| 14 | Removal of vegetation/grass etc including cutting holes into or through brick walls/concrete and removal of small trees/woods etc and making good distrubed surface with cement with cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) surface area n. exc. 0.50 Sqm, complete all as specified and directed. |
| 15 | Supply only liquid water proofing compound conforming to IS: 2645 - 1975 specification, complete all as directed. |
| 16 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backin), removing serviceable tiles to store and rubbish off the premises, complete as specified and directed. |
| 17 | M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed with adesive and pointed in epoxy grout with spacers over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed. |
| 18 | M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm, in floors etc. set and jointed over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed. |
| 19 | All as per item No 17.00 here-in before but as in skirting/dado over and including rendering 10mm thick in CM (1:4) as backing coat to receive wall tiles, complete as specified and directed. |
| 20 | M&L for glazed ceramic coloured tiles in vertical surface 350 x 250 x 7mm/450 x 300x 7 to 8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles over and including 10mm thick rendering in CM (1:4) as backing coat to receive wall tiles, complete all as specified and directed. |
| 21 | M&L for cleaning the surfaces of plaster using wire brush, brooming down and washing down with water to remove dust etc. and brushing with neat cement slurry @ 0.5 kg/sqm with acrylic based polymer modified cementitous composite @ 0.50 kg/sqm, complete all as specified and directed. |
| 22 | M&L 10mm thick rendering on fair faces of brick work or concrete surfaces in CM (1:3), using liquid water proofing compoundas per manufacturer's instructions, in sunken portion, complete all as specified and directed.(Note : WPC shall be measured and paid separately as 'supply only'.) |
| 23 | M&L for PCC (1:5:10) type E-2, (using 40mm graded crushed stone aggregate) as in sunken portion, complete all as specified and directed. |
| 24 | M&L for 25mm thick PCC (1:2:4) type B- 0, (using 12.5mm graded crushed stone aggregate) as in sunken portion, complete all as specified and directed. |
| 25 | Taking down chowkat with shutter (without taking off shutter from the frame) n.exc 1.5 Sqm each, complete all as specified and directed. |
| 26 | Taking down chowkat with shutter (without taking off shutter from the frame) exc 1.5 Sqm but n.exc 4 Sqm each, complete all as specified and directed. |
| 27 | S & F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet, complete all as specified and directed. |
| 28 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side prelam PVC sheet. Stile and rails feathered at edges for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of both side Prelam PVC sheet. to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable Prelam PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site, as per specification & drawing, complete all as specified and directed. |
| 29 | S&F 125 x 60mm size pressed steel door frames of doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed. |
| 30 | S&F 105 x 60mm size pressed steel door frames of doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed. |
| 31 | S&F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed. |
| 32 | S&F mild steel bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples; chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plate washers and similar small articles conforming to Fe-290 Gde E-165, complete all as specified and directed. |
| 33 | M & L for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in coping/benching etc including necessary formwork, complete al as specified and directed. |
| 34 | S & F 35mm thick factory made second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc. size of members of shutter as specified in SSR Part-I section B, clause 8.20 (a), complete all as specified and directed. |
| 35 | S&F of 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including sliding door bolt, tower bolt, handle, hinges etc, complete all as specified and directed. |
| 36 | M&L for providing and fixing built-in cupboard/cabinets of 18mm Pre-laminated MDF board for carcass and shutter, 25mm plywood for shelves and 6mm plywood for back panel including machine cut components, edge lipping/edge banding, internal shelves partitions, skirting/base support where required and all fittings and fixtures complete such as SS/brass hinges /soft close concealed hinges, telescopic channels for drawers where provided, locks, magnetic catches, handles/knobs, tower bolts as applicable adjustable shelf supports, screws, fastener and anchoring accessories and approved laminate/veneer/paint/polish finish to exposed surfaces and matching edge treatment including cutting, fitting, fixing, alignment, making good to adjoining surfaces, protection during construction, complete all as specified and directed. Note : Item shall be measured as finished front elevation area of cupboard in Sqm for payment. |
| 37 | M&L for preparing new or previously untreated wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer, complete all as specified and directed. |
| 38 | S&F 75mm hasp & staple, safety type, aluminium anodised with mild steel hing pin including bolt to hinge plate and fixed with screws, complete all as specified and directed. |
| 39 | S&F 150mm long extruded aluminium alloy handle, cast type, anodised, complete all as specified and directed. |
| 40 | S&F butt hinges of size 100mm, extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type B-21, complete all as specified and directed. |
| 41 | S&F 150mm long aluminium anodised, barrel tower bolt of extruded section, complete all as specified and directed. |
| 42 | S&F mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and directed. |
| 43 | S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed. |
| 44 | Dismantling wrought iron or mild steel work of any description not otherwise provided for and removing from site of work, complete all as specified and as directed. |
| 45 | Supply and fix aluminium anodised (powder coated) three track sliding window frame with shutters with (2 nos glazed and one wire gauzed shutter) including all necessary joining cleats, hold fast, rubber gasket, snap beading and locking arrangements fixed with screws to wall etc. complete with glazing and including 5mm thick tinted glass to aluminium frame work using rubber gasket and including stainless steel wire cloth of 0.36mm dia & average width of aperture 1.40mm with staple or suitable fillets wire mesh fitted with screws and washers as specified with the following section of frame and shutter:-(A) Sections for shutter:-(i) Vertical' section 38 x 20 x 1.5 mm thick. (ii) Interlock' section 38 x 20x 1.50 mm (iii) Top/ Bottom' section 41 x 20 x 1.50 mm thick.(B) Section for frame:-(i) Top & Sides 91.00 x 29.70 x 1.50 mm thick.(ii) Bottom 91.00 x 29.70 x 1.50 mm thick, complete all as specified and directed. |
| 46 | S&F anodised aluminium frame, powder coated (minimum thickness of powder coating 50 micron) for doors, windows, ventilators, partitions etc with one or more rebates including joining cleat for fixing etc, complete all as specified and directed. |
| 47 | S&F anodised aluminium door shutters, powder coatedg (thickness or powder coating not less than 50 micron)aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc, complete all as specified and directed. |
| 48 | S&F plain sheet glass 4.8mm thick, of any colour and glazing with and including anodised aluminium snap beading or rubber / neopren bead, fixed in aluminum frame either in window/ventilator or door frame, complete all as specified and directed. |
| 49 | Providing and fixing aluminium powder-coated ventilator of size not exceeding 0.36 Sqm, fabricated from approved extruded aluminium sections, partly glazed with 5mm thick frosted glass and partly fitted with operable aluminium louvers glazed with 5mm thick frosted glass, complete with all necessary fittings, hinges, handles, locking arrangements, rubber gaskets, glazing clips, screws, sealant and other accessories fixed in position to walls including making good disturbed surfaces, complete all as directed and specified. |
| 50 | M&L for mild steel framed work such as grill, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barrel iron doors, ladders framed balusters, walks railings, frame work of water tanks and similar work conforming to E-165 (Fe-290) including two coats of synthetic enamel paint over one coat of red oxide, complete all as specified and directed. |
| 51 | M&L for preparation of new steel or iron surfaces of any description exc. 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint (1st grade quality) over a coat of red oxide primer, complete all as specified and as directed. |
| 52 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture1.40mm and fixed with aluminium wire staples, complete all as specified and directed. |
| 53 | S&F stainless steel plate rack of size 24\\" x 30\\" x 10\\", made of 0.65mm thick (min) standard quality stainless steel (SS-204) weight not less than 6 kg, fixed with brass screw, complete all as specified and directed. |
| 54 | S&F in repair brass CP wall mixer for mixing hot & cold water screwed down for iron pipe with long bend pipe for OHS or equivalent, complete all as specified and directed. |
| 55 | S&F in repair kitchen sinks made of stainless steel with draining board, 1mm thick (SS-304) with plugs washers and wastes, including bedding in cement mortar onto dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mmx160mm including waste pipe & coupling 32mm, complete all as specified and directed. |
| 56 | S&F in repair 20mm bore gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed. |
| 57 | S&F in repairs 15mm bore bib taps, cast copper alloy, chromium plated, fancy type, screwed down, screwed for iron pipe or for brass ferrule, compelete all as specified and directed. |
| 58 | S&F in repair 15mm CP, 2 in 1 angle valve, fancy type cast copper alloy screwed for iron pipe or for brass ferrule, complete all as specified and directed. |
| 59 | S&F in repair 15mm bore angular stop cock, chromium plated, screwed down, high presure with crutch or butterfly handle screwed both ends for iron pipe or union, complete all as specified and directed. |
| 60 | S&F in repair brass CP mixer for mixing hot & cold water screwed down for iron pipe, complete all as specified and directed. |
| 61 | S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.0 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and directed. |
| 62 | S &F glass shelf assembly of size 500 x 125mm with CP brass bracket guard and railing, complete all as specified and directed. |
| 63 | S &F corner glass shelf assembly of size 300mm with CP brass bracket guard and railing, complete all as specified and directed. |
| 64 | S & F in repairs, 15mm bore, PVC connection pipe 600mm long with PTMT nuts at both ends, complete all as specified and directed. |
| 65 | S&F in repair shower rose 125mm size, brass, chromium plated, with or without swivel joints, including fixing to steel pipe or union, complete all as specified and directed. |
| 66 | S & F in repair stainless steel soap dish, any type, fixed to plugs with chromium plated brass screws, complete all as specified and directed. |
| 67 | S&F stainless steel, toilet paper holder, box type, with chromium plated brass screws, complete all as specified and directed. |
| 68 | S&F in repair towel rail, 450mm long PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms), complete all as specified and directed |
| 69 | S&F in repair vitreous china wash down water closet pan (pedestal pattern), white including PVC seat cover (excluding fixing bolts, flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc, complete all as specified and as directed. |
| 70 | S&F in repair 600mm x 450mm bevelled edge mirror made of selected quality sheet glass not less than 5.5mm thick, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 71 | S&F in repair 10 ltrs capacity low level valve less PVC syphonic action type flushing cistern white with inlet, ball valve, float and handle, 32mm dia flush pipe polyethylene or PVC including brackets and connection to pipe, complete all as specified and directed. |
| 72 | S&F vitreous china ware wash hand basin white, flat back, size 550 x 400mm size including cutting for and pinning ends of brackets or erecting stand including pedestal, complete all as specified. |
| 73 | Taking down 15mm bore steel water tubing and connection from wall /ceiling surfaces including cleaning for re-fixing or removing from site of work, complete all as specified and directed. |
| 74 | S&F steel water tubing and connection, medium grade, 15mm bore with all fitting fixed concealed to wall or in ceiling complete and making good surfaces with CM (1:3), complete all as specified and directed. |
| 75 | Re-fixing old steel tubing and connection 15mm bore in new or old position with new fittings, complete on wall/ceiling, complete all as specified and directed.(Note : Serviceable steel tube obtained from taking down shall be re-used) |
| 76 | Taking down 20mm bore steel water tubing and connection from wall /ceiling surfaces including cleaning for re-fixing or removing from site of work, complete all as specified and directed. |
| 77 | S&F steel water tubing and connection, medium grade, 20mm bore with all fitting fixed to wall or in ceiling, complete all as specified and directed. |
| 78 | Re-fixing old steel tubing and connection 20mm bore in new or old position with new fittings, complete on wall/ceiling, complete all as specified and directed.(Note : Serviceable steel tube obtained from taking down shall be re-used) |
| 79 | S&F in repair 25mm dia curtain rod stainless steel, chromium plated with fixing brackets, etc, complete all as specified and directed. |
| 80 | S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including dismantling of old unserviceable pipes and fittings, complete all as specified and directed. |
| 81 | S&F 110mm bore, PVC (SWR) bends, any radius, complete all as specified and directed. |
| 82 | S&F 110mm bore, PVC (SWR) WC connector bends type, complete all as specified and directed. |
| 83 | S&F 110mm bore, PVC (SWR) vent cowl, complete all as specified and directed. |
| 84 | S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified and directed. |
| 85 | S&F 110mm PVC (SWR) junction double, (double T) equal or unequal, complete all as specified and directed. |
| 86 | S&F 110mm PVC (SWR) branch piece, (double Y) equal or unequal, complete all as specified and directed. |
| 87 | M&L for PVC(SWR) gully trap 125/110mm, setting and jointing with solvent cement, complete all as specified and directed. |
| 88 | S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement, dia of outlet 100mm, complete all as specified and directed. |
| 89 | Demolition of reinforced cement concrete(reinforcement cut as required to facilate demolition) of any description and in any position not otherwise specifically provided for, complete all as specified and directed. |
| 90 | Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (horizontal or sloping), rough finished surfaces of concrete, complete all as specified and directed. |
| 91 | S & F mild steel TMT bars 10mm dia (not lass than Grade Fe-500D), cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia., or securing with clips, complete all as specified and directed. |
| 92 | M&L for RCC (1:2:4) (nominal mix) type B1 (using 20mm graded crushed stone aggregate) as in slabs supported on walls, beams, lintels and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.Note : Reinforcement shall be measured and paid seperately. |
| 93 | Demolition of stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar, complete all as specified and directed |
| 94 | M&L for granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete, on floors, over and including 15mm thick screed bed of cement mortar (1:6), complete all as specified and directed. |
| 95 | M&L for granite (of any type) tiles 20mm thick machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete, over and including rendering 10mm thick in CM (1:4) as backing coat, complete all as specified and directed. |
| 96 | M&L for machine cut kota stone slab flooring and shelves, 20-25mm thick, laid over and including cement screed bed/bedding layer of 20mm thick, in CM (1:6), laid and jointed with grey cement slurry, mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed. |
| 97 | M&L for machine cut kota stone slab 20-25mm thick on vertical surfaces of wall as in riser of steps, skirting, dado and pillar, laid over and including 10mm thick rendering in CM (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed. |
| 98 | Demolition of brick work or sone/boulder masonry, built in cement mortar including all quoiins, pillars etc. but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and directed. |
| 99 | M&L for brick work with fly ash bricks, old size, straight or curved on plan exc 6 mtr mean radius built in CM (1:6), complete all as specified and directed. |
| 100 | M&L for brick work with fly ash bricks, old size, burnt clay bricks, straight or curved on plan, any radius, built in CM (1:4) in half brick thick, complete all as specified anddirected. |
| 101 | M&L for 4mm thick pre-painted E-fibre board, designer/decorative, fixed or laid/inserted to and including GI snap grid frame size 605mm x 605mm work for false ceiling fixed with hangers 4mm to 6mm dia. G.I. (length as required) adjusting level, fixed to roof slabs/truss by means of ceilling cleats made out of G.I. flat 40 x 3mm, size 60mm long and expansion hold fasteners, 12.5mm dia, 40mm long including necessary dismentaling of existing unserviceable ceiling boards of any thickness including cover fillets, complete all as specified and directed. |
| 102 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings including ridges, hips, valleys, as in roof covering, complete all as specified and as directed. |
| 103 | Fixing only plain or corrugated steel sheeting, any gauge thickness including nainital or similar pattern roof covering, complete all as specifed and directed.(Note : Serviceable sheet obtained from dismantling shall be re-used) |
| 104 | S&F pre painted galvalume aluminium zink coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws, complete all as specified and as directed. |
| 105 | S&F pre painted galvalume aluminium zink coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws, complete all as specified and as directed. |
| 106 | S&F 1.6mm thick mild steel, plain, black sheet in wall crumple joints, wall cladding, steel gates and similar work, cut to size, holes punched, including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required, complete all as specified and as directed. |
| 107 | M&L for post construction antitermite treatment of soil under existing floor using chemical emulsion (ATT chemical) @ 1.00 ltr/hole, 300mm dia apart including drilling and plugging 12mm dia holes with CM (1:2) to match the existing floor, complete all as specified and directed. |
| 108 | M&L for post construction antitermite treatment by providing and injecting chemical of anti termite treatment along with external wall below concrete or machinery apron/floor using chemical emulsion (ATT chemical) @ 2.25 ltr/RM including drilling and plugging holes etc, complete all as specified and directed. |
| 109 | M&L for post construction antitermite treatment at point of contact of wood work by chemical emulsion (ATT chemical) (in oil or kerosene bases solution) @ 0.50ltr/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same, complete all as specified and directed. |
| 110 | S&F rotational moulded polyethylene (HDPE) water storage tanks, (made of 100% virgin and food grade plastic), triple layered, (cylindrical vertical with closed top) ISI marked, confirming to IS 12701-1996, hoisted and fixed in position all as specified in SSR Part I (1000 ltr capacity) including 20mm Nipple suitable for HDPE water tank and 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed to 20mm bore pipe inculding taking down old unserviceable water tank of any capacity, complete all as specified and directed. |
| 111 | S & F in repair cast iron nahani trap 75mm dia with grating including jointing to waste pipe fixed in CM (1:2:4) type B1 (using 20mm graded crushed stone aggregate), complete all as specified and as directed. |
| 112 | Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed. |
| 113 | M&L for 75mm thick PCC (1:3:6) type C2 (20mm grade crushed stone aggregate) as in plinth protection etc and finished even and smooth without using extra cement, complete all as specified and directed. |
| 114 | M&L for chequred cement concrete tiles 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry in floors with grey pigment cement and pigments over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed. |
| 115 | M&L for 75mm thick PCC (1:3:6) type C1 (20mm grade crushed stone aggregate) as in sub base, PCC path and similar works, complete all as specified and directed. |
| 116 | M&L for providing and applying two component structural grade polymer modified reinforcement mortar upto a thickness of 30mm over a coat of epoxy resin bonding agent as per manufacture's specification. The cured mortar shall achieve a minimum compressive strength of 12N/mm2 in a day & 45 Nimm2 (Minimum) in 28 days with Flexural strength 8N/mm2 in 28 days Chloride diffusion coefficient shall be Nil after 24 hours when tested by Accelerated electrochemical chloride ion diffusion test method and the depth of carbonation shall be Nil after 24 hours when tested by Accelerated carbonation test, in addition to this percentage of water absorption should be 0.45 after 24 hours in immersion test at various locations in bldgs, complete all as specifed and directed. |
| 117 | Dismantling removing all unsound concrete, plastered material by chipping/chiseling gently at all effected and adjoining areas of concrete etc. till sound surface is reached at various locations in building, subsequently cleaning the surfaces by hair brush and air blower, removing rubbish off the premises, disposing at the dumping site outside MoD land, complete all as specifed and directed. |
| 118 | Removing of concrete all around reinforcement bar upto 12 mm dia and over from behind the reinforcement bars average 25mm (but not less than 15mm air gap) by manual methods (using wire brushing chiseling etc.) and applying chloride free rust removing chemical on rusting steel reinforcement bar and removing all rust from steel reinforcement bar by emery paper and cleaning the area thoroughly by water and allow it to dry and totally rust free of reinforcement bar all as complete as per manufacture’s instruction, complete all as specifed and directed. |
| 119 | M&L for preparation of existing reinforcement surface by brush and application of two component epoxy zinc rich primer on existing reinforcement surface of minimum specific gravity 1.75, adhesive bond strength with steel is 1.50N/mm2 and maximum coverage area 5.00 Sqm per litre, complete all as specified and directed. |
| 120 | M&L for introducing new reinforcement bars upto 12 mm dia and over for structural connection in RCC beams, columns, lintel and slabs including power drilling holes of appropriate diameters in reinforced or plain cement concrete to a minimum depth of 150rnm and upto 200mm including power drilling, fixing the reinforcement in position using epoxy, cleaning of loose dust by blowing air, sealing with epoxy cartridges etc, complete all as specifed and directed. |
| 121 | M&L for supply, mixing and placement of micro-concrete cement based prepacked single component chloride free, sulphate free, non-shrink, free flow. elf compacting, ready to use after mixing water in specified proportion and in required thickness over a coat of epoxy resin bonding agent as per manufacture's instruction including necessary form work. Compressive strength (ASTMC 109, cm cube) of 50 MPa (Minimum) at 28 days including application curing compound concrete at various locations in Bldgs, complete all as specifed and directed. |
| 122 | S&F for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats Fe 410W (Gde E-250) quality A, complete all as specified and as directed. |
| 123 | Roughening surface of old concrete roof/floor by picking, sweeping clean and washing down with water to remove dust etc and applying the following treatment all as directed in order of precedence as stated:(a) Brushing neat cement slury with 3.0 kg of cement per Sqm.(b) 15mm thick screed bed or bedding layer in CM (1:4) mixed with and including water proofing compound as per manufacturer instruction on existing roof surface true to level.(c) Applying one coat of bituminous primer @ 0.40 Ltr/Sqm. (d) Supply and laying 3mm thick APP based polymeric membrane of approved manufactured with weight not less than 3.50 Kgs per Sqm reinforced with non-woven polyester fabric weighing not less than 160gms per Sqm having softening point not less than 15°C, having tensile strength of 650 N/Sqcm and 350 N/Sqcm in longitudinal and transverse directions respectively of the reinforced tearing strength of 180 N by torch application. Polymeric membrane shall be taken to a height of 30cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing. (e) Applying one coat of aluminium paint @ 0.11 Kg/Sgm over APP membrane surface. Note:- (i) Laying APP based polymeric membrane shall be done torch on method as per manufactures instructions.(ii) A minimum overlap of 150mm and 100mm should be made at the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as per manufacturers instruction.(iii) APP based polymeric membrane shall be of any one of the approved makes as specified here-in-after and shall conform to specifications given in IS 16540-2017/1S 16532 2017.(iv) Contractor shall produce necessary test certificate of the manufacturer to the Engr-in-Charge before incorporation in the work. (v) Necessary independent tests shall also be carried out by the contractor without any extra cost to the Deptt as per relevant IS specifications and membranes with satisfactory test results shall only be incorporated in the work.(vi) The work shall be executed through authorised applicators of original manufacturer only. |
| 124 | Taking down carefully copper/aluminium point wiring complete (light, fan, plug point & power complete alongwith fittings (switches, ceiling roses, tube light fittings, bulk head fitting, regulator, sockets main switches, DB removing materials to store & making good of disturb surfaces of wall/floors etc, complete all as specified and directed. |
| 125 | M & L for point wiring complete with PVC insulated unsheathed, 1100 volts grade cable 1.5 Sqmm (nominal area) FRLSH type multi stranded copper conductor, single core drawn in and including concealed, rigid PVC conduit (ISI marked) not less than 20mm dia, medium grade, including all conduit accessories with and including concealed modular box of suitable size for mounting modular switch, sockets, fan regulator etc including 1.5 Sqmm FRLSH type PVC insulated unsheathed cable multi-stranded copper conductor as continuous earth wire and connected to earth dolly as required at site & including chases cutting & making good disturbed surface & applying finishes to match existing surface etc. for one light/fan point controlled by one, one way switch single pole, complete all as specified and directed.Note: - (i) Rate quoted shall deemed to be included for cost of modular box (as per number of module of outer cover) and concealed in wall including cutting and sinking of boxes and making good to the walls. (ii) Provision of blank plates as per site requirement, shall deemed to be included in the unit quoted rate. |
| 126 | All as per item No 124.00 here-in before but for 3 pin 5 Amp socket point on same board, complete all as specified and directed. |
| 127 | All as per item No 124.00 here-in before but for 3 pin 5 Amp socket point on independent board, complete all as specified and directed. |
| 128 | All as per item No 124.00 here-in before but one light point controlled by switches, complete all as specified and directed. |
| 129 | All as per ser item No. 124.00 here-in before but for one bell/buzzer point controlled by one push button on the same board with other switches or independent, complete all as specified and directed. |
| 130 | All as per item No 124.00 here-in before but with 4.0 Sqmm PVC insulated unsheathed multi stranded cable FRLSH type for one 3 pin socket outlet 15 Amp, independent including PVC insulated 4.0 Sqmm FRLSH type copper multi stranded conductor as earth wire including steel box of required for modular switches/sockets for 3 pin socket outlet point, 15 Amp on independent board and industrial socket for geyser, complete all as specified and directed. |
| 131 | S&F switch, modular type, single pole, one way, 5/6 Amp, one module, complete all as specified and directed. |
| 132 | S&F switch, modular type, single pole, one way, 15/16 Amps, one module, complete all as specified and directed. |
| 133 | S&F socket outlet, modular type, multipurpose, having provision for 2/3 pin, 5/6 Amp, combined, two module, complete all as specified and directed. |
| 134 | S&F socket outlet, modular type, multipurpose having provision for 3 pin, 15/16 Amp and 3 pin 5/6 Amp, combined, two module, complete all as specified and directed. |
| 135 | S&F bell push, modular type, single pole, 5/6 Amp, one module, complete all as specified and directed. |
| 136 | S&F switch modular type, single pole, 2 way, 5/6 Amp, one module, complete all as specified and directed. |
| 137 | S&F in repair of bell, ding dong type AC, 230 volts, single phase complete all as specified and directed. |
| 138 | S&F decorative modular cover plate with frame, 2 module, white, completes all as specified and directed. |
| 139 | S&F decorative modular cover plate with frame, 3 module, white, completes all as specified and directed. |
| 140 | S&F decorative modular cover plate with frame, 4 module, white, completes all as specified and directed. |
| 141 | S&F decorative modular cover plate with frame, 6 module, white, completes all as specified and directed. |
| 142 | S&F decorative modular cover plate with frame, 9/10 module, white, completes all as specified and directed. |
| 143 | M&L for 40mm bore GI tubing, heavy duty, including all fitings, fixed to wall/ceiling/floor, completes all as specified and directed. |
| 144 | Taking down ceiling fan, sealing cable end, dismantling blades and removing fan and blades to AGE E/M store yard, completes all as specified and directed. |
| 145 | S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep, min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) including electronic modular type regulator (2 module), completes all as specified and directed. |
| 146 | S&F MS box (meter box) of size 900 x 300 x 1000mm (double door) 2.0mm thickness, dust proof with front opening hinged door both side, made out of 2mm thick MS sheet cubical type with powder coated painting for mounting of, electric meter etc inside the box fixed in wall by necessary cutting of wall of suitable size in concealed and making good the surface, by applying cement work, brick work and matching colour (Oil bond distemper) etc including dismantling of MS box, electric meters and fixing the new electric meters in new box carefully including necessary electric connection by suitable size of copper conductor cable of suitable length and testing, complete all as specified and directed.Note : (a) Any plastering work involved while taking out old existing meter and refixing the new meter box is deem to be included in the rate.(b) PVC flexible conduit required within the meter boxes is deem to be included in the item rates. |
| 147 | S&F exhaust fan, steel body AC, single phase, 230V of size 300mm sweep with, blades, frame and louvers including cutting wall for fixing exhaust fan and making good the opening in CM (1:3) or PCC (1:2:4) type B1 as required at site, completes all as specified and directed. |
| 148 | S&F ceiling rose of size 65 x 50mm surface bakelite 240 Volts, three terminal, complete all as specified and directed. |
| 149 | S&F LED lamp 9 Watt / 10 Watt, B-22 base, complete all as specified and directed. |
| 150 | S&F angular lamp holder, insulated body, suitable for B-22 base, complete all as specified and directed. |
| 151 | S&F in repair LED lights fitting 1 x 20 W, 220V, AC , box type with driver, LED lighting fixture with extruded aluminium channel, including LED tube light connecting up with 3 core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed. |
| 152 | S&F in repair LED light fitting, mirror type with high output diffuser 2 feet, 10 watt 220 V, AC, decorative type with driver, LED tube light of 10 watt connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, completes all as specified and directed. |
| 153 | S&F in replacement decorative, wall mounting, brushed nickel finish fixture with acrylic diffuser suitable for 9 W/10 W LED lamp B22 base fittings, complete all as specified and directed. |
| 154 | S&F electric water heater, stoarage type,vartical mounted rust proof ABS outer body with high quality steel inner tank and heating element upto 1.5/2 KW capacity 25 litre, BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV, connection pipe etc. including PVC connection pipe for hot/cold water to existing water lines, necessary fixing arrangement by using 50 x 5mm MS plate/in built fixing arrangement as per OEM and writing MES No., complete all as specified and as directed. |
| 155 | S&F MCB distribution board (DB) TPN with sheet metal encloser, double door, IP 43 protection, 240 volts, 04 way, with rated copper busbar for each phase (as per OEM), neutral link for fixing MCBs/Isolators including taking down old unserviceable MCB DB of any description, completes all as specified and directed. |
| 156 | S&F MCB distribution board (DB), SPN with sheet metal encloser, double door, IP 43 protection, 240 volts, 12 way, with rated copper busbar (as per OEM), neutral link for fixing MCBs/Isolators including taking down old unserviceable MCB DB of any description, completes all as specified and directed. |
| 157 | S&F MCB distribution board (DB), SPN with sheet metal encloser, double door, IP 43 protection, 240 volts, 4 way, with rated copper busbar (as per OEM), neutral link for fixing MCBs/Isolators including taking down old unserviceable MCB DB of any description, completes all as specified and directed. |
| 158 | S&F MCB SP 6 to 32 Amps, 240V, 10 KA, 'C' curve, including connection and testing, completes all as specified and directed. |
| 159 | S&F MCB SPN 6 to 32 Amps, 10 KA, 'C' curve, including connection and testing, complete all as specified and directed. |
| 160 | S&F MCB 4 pole, 63 Amps, 10 KA, 'C' curve, including connection and testing, complete all as specified and directed. |
| 161 | S&F in repair modular surface mounting plastic box of size 3\\" x 3\\", 1 & 2 module, completes all as specified and directed. |
| 162 | S&F power unit suitable for load max up to 3.5 KW including 2 module box and cover plate for mounting of power unit, complete as specified and directed. |
| 163 | M&L for submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor cable 6 Sqmm, 1100Volts grade, FRLSH type, drawn in and including heavy duty rigid PVC concealed conduit (ISI marked) not less than 20mm dia with fixing accessories including 6 Sqmm 1100 Volts grade, FRLSH type, PVC insulated unsheathed multistranded flexible copper conductor cable as continuous earth wire and connecting to common earth dolly including taking down old unserviceable sub-main wiring, complete all as specified and directed.Note:-(i) Two runs of single core cable with one run of earth continuity conductor including PVC conduit shall be measured and paid as one length.(ii) Cutting chases for conduit and sinking of boxes and making good to wall floors etc shall deemed to be including in the unit quoted rate. |
| 164 | M&L for submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor cable 4 Sqmm, 1100 Volts grade, FRLSH type, drawn in and including heavy duty rigid PVC concealed conduit (ISI marked) not less than 20mm dia with fixing accessories including 4 Sqmm 1100 Volts grade, FRLSH type, PVC insulated unsheathed multistranded flexible copper conductor cable as continuous earth wire and connecting to common earth dolly including taking down old unserviceable sub-main wiring, complete all as specified and directed.Note: (i) Two runs of single core cable with one run of earth continuity conductor including PVC conduit shall be measured and paid as one length.(ii) Cutting chases for conduit and sinking of boxes and making good to wall floors etc shall deemed to be including in the unit quoted rate. |
| 165 | M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6.0mm thick buried directly in ground vertically to a depth not less than 2.25 meter below ground level with top edge of earth plate at a depth not less than 1.5 meter below ground level, earth plate surrounded by 15cm thick packed layer of charcoal dust and common salt, connected to galvanized earth lead wire 4mm thick dia by means of bolts, nuts and washers of galvanized iron or steel and thimbles and other end of the earth wire connected to earthing test point/equipment and protected by galvanized iron pipe light grade 20mm bore, up to earthing test point/equipment fixed with required number of mild steel clamp made out of 25mm x 3mm flat iron and perforated water pipe 20mm dia. GI medium grade of length 2.25 meter and top with socket & plug and bottom connected to earth plate by slit and two bolts/nuts/washers, PCC chamber in PCC (1:2:4) type B-1 and 40mm thick pre-cast RCC (1:2:4) type B-0 cover reinforcement with 40mm x 40mm x 6mm MS angle iron frame of size 25mm x 25mm, excavation & earth work complete all as shown in electrical plate No. 3 of MES Schedule Part-I of SSR-2009 connected to main switch board and testing on completion, all as specified and directed. |
| 166 | S&F LED building security light fitting 35 Watt made up of pressure die cast housing with toughened glass and individual high power LEDs with secondary optics, IP66 protection and impact resistance of IK07, complete pre-wired and connecting up with suitable twin core flexible copper wire including provision of necessary GI pipe as bracket, medium grade, 25mm/ 40mm bore pipe (as per the model of light fittings) upto 1.5 Mtr length, bend to shape with necessary clamps made out of mild steel, nuts and bolts etc. including two coats of synthetic enamel paint over a coat of red oxide primer on exposed steel surfaces foe fixing the fitting to bldg etc , complete all as specified and directed. |
| 167 | Taking down single phase electric energy meter any type and refixing, after repair work complete all as specified and directed. |
| 168 | Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sqmm 4 core including taking out old unserviceable UG cable of any type and size, complete all as specified and directed. |
| 169 | Excavation in trenches not exceeding 1.5 metre wide and not exc 1.5 metre in depth for foundation or cable trenches, shafts, wells cesspits, manholes, pier holes etc. n. exc. 10 Sqm on plan and getting out in soft/loose soil, complete all as specified and directed. |
| 170 | Removing of excavated materials to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 metre above the starting point in any type of soil, complete all as specified and directed. |
| 171 | Returning filling in incl spreading, leveling watering and well ramming in layers not exceeding 25cm in soft/loose soil, complete all as specified and directed. |
| 172 | Supply and laying double walled corrugated (DWC) HDPE duct pipe of 50mm dia (outer) conforming to IS, approved colour complete with fittings for cable protection, complete all as specified and directed. |
| 173 | Note: An amount of Rs.51,732.00 on account of Credit Schedule for schedule 'A' part - II shall be deducted from the total amount of BOQ to arrive at the contract sum. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysOct 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender