Tender For Addition Alteration To Building No. P-779 And Provision Of Gender Specific Toilet At Afs Hasimara
Tender Value
42 Lakhs
Estimated cost
Bid Submission
20 Oct 2026
16 days left
EMD
84000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalpaiguri → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition Alteration To Building No. P-779 And Provision Of Gender Specific Toilet At Afs Hasimara
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver4.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority:GE (AF) HASIMARA Name of Work : ADDN/ALTN TO BUILDING NO. P-779 AND PROVN OF GENDER SPECIFIC TOILET AT AFS HASIMARA Contract No: GE/HAS/ /2026-27 Name of the Bidder/ Bidding Firm / Company : PRICE SCHEDULE 'A' (BoQ)(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of Item Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/loose soil, complete all as specified and directed. |
| 3 | Excavation in trenches n.exc 1.5m wide and n.exc 1.5m depth for foundation, shafts, wells cess pits, manholes, pier holes etc. and n.exc 10 Sqm on plan and getting out in soft/loose soil, complete all as specified and directed. |
| 4 | Returning filling in incl spreading, leveling watering and well ramming in layers not exceeding 25cm in soft/loose soil, complete all as specified and directed. |
| 5 | Removing excavated materials to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5m above the starting point in any type of soil, complete all as specified and directed. |
| 6 | M & L for PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete, complete all as specified and directed. |
| 7 | Demolition of brick work or sone/boulder masonry, built in cement mortar including all quoiins, pillars etc, complete all as specified and directed. |
| 8 | M&L for brick work with fly ash bricks, straight or curved on plan exc 6 mtr mean radius built in CM (1:6), complete all as specified and directed. |
| 9 | M&L for brick work with fly ash bricks, old size, straight or curved on plan exc 6 mtr mean radius built in CM (1:4), complete all as specified and directed. |
| 10 | Taking down cement plaster of any description any thickness incl racking out joints hacking for keys scrubbing down with water etc, including disposal of debris and rubbish off the premises, complete all as specified and directed. |
| 11 | M & L for rendering 15mm thick in two coats (10mm under layer + 5mm top layer) on fair faces of brick work or concrete surfaces of wall in CM (1:4), mixed with water proofing compound on top layer as per manufacturer's instructions, finished the surface even and fair without using extra cement, complete all as specified and directed. (Note : WPC shall be measured and paid separately as 'supply only'.) |
| 12 | M&L for preparation of newly plastered surfaces of wall, cornices etc and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm, complete all as specified and directed.Note :- (i) All coats including primer to be applied with fully automatic airless spray machine of paint application with a flow speed of minimum 1 ltr per minute having a pressure of 3300 PSI / Manual application Allow 6-8 hrs to dry the surface in subsequent coats of paint. |
| 13 | M&L for preparation of newly plastered wall surfaces and applying two coats of cement base paint over a coat of alkali resistant primer, complete all as specified and directed. |
| 14 | M&L for complete removal of existing treatment of old plastered surfaces of wall and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint, complete all as specified and directed. Note :- (i) All coats including primer to be applied with fully automatic airless spray machine of paint application with a flow speed of minimum 1 ltr per minute having a pressure of 3300 PSI / Manual application Allow 6-8 hrs to dry the surface in subsequent coats of paint. |
| 15 | M&L 15mm thick rendering in CM (1:6) on stone masonry surfaces or on other than fair faces of brick masonry finished even and smooth witout using extra cement, complete all as specified and directed. |
| 16 | M&L for preparation of newly plastered surfaces of wall and applying three coat of white wash, complete all as specified and directed. |
| 17 | M&L for preparing newly plastered walls surfaces and applying two coats of oil bound distemper over chalk whitening as priming coat over and including 1.5mm thick wall care putty, to obtain a smooth surface, complete all as specified and directed. |
| 18 | M & L for complete removal of existing treatment of walls/ceiling surfaces applying 1.5 to 2mm thick wall care putty to obtain a smooth surface including making good any undulations on the surfaces and applying two coats of oil bound distemper over the putty surfaces, complete all as specified and directed. |
| 19 | M&L for RCC (1:1.5:3) (nominal mix) type A-1, (using 20mm graded crushed stone aggregate) as in foundation, footings, foundation beams, plinth beam etc., complete all as specified and directed. |
| 20 | M&L for RCC (1:1.5:3) (nominal mix) type A-1, (using 20mm graded crushed stone aggregate) as in beams, contilevers, lintels over 1.5m span etc, complete all as specified and directed. |
| 21 | M&L for RCC (1:1.5:3) (nominal mix) type A-1, (using 20mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed. |
| 22 | M&L for RCC (1:1.5:3) (nominal mix) type A-1, (using 20mm graded crushed stone aggregate) as in columns, pillars, piers, posts and struts, complete all as specified and directed. |
| 23 | Use and waste of form work to sides of concrete foundations, footings, bases of columns, side of foundation and plinth beams and similar works, rough finished surfaces of concrete, complete all as specified and directed. |
| 24 | Use and waste of form work to sides and soffits of floor or floor beams, lintels, contilevers, shelves including supports etc, rough finished surfaces of concrete, complete all as specified and directed. |
| 25 | Use and waste of form work to sides of columns, pillars, piers, posts, struts, etc, rough finished surfaces of concrete, complete all as specified and directed. |
| 26 | S & F mild steel TMT bars 10mm dia and over (not lass than Grade Fe-500D), cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia., or securing with clips, complete all as specified and directed. |
| 27 | S & F mild steel TMT bars 6 to 8mm dia (not lass than Grade Fe-500D), cut to length, bent to shape required, including 10mm dia in stirrups, spacers and binding with mild steel wire (annealed) not less than 0.9mm dia., or securing with clips, complete all as specified and directed. |
| 28 | M&L for hardcore of gauge not exceeding 63mm using broken stone or boulders, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface, complete all as specified and directed.(Note : Compacted thickness shall be measured for payment.) |
| 29 | M&L for sand filling under floors or in foundations etc. including watering and consolidation, complete all as specified and directed.(Note : Consolidated thickness shall be measured for payment.) |
| 30 | M&L for 100mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub-bases, floors and pavings etc,complete as specified and directed. |
| 31 | M&L 75mm thick PCC (1:3:6 ) type C-2, (using 40mm graded stone aggregate) for sub base of floor, plinth prtection, floors and pavings etc, complete all as specified and directed. |
| 32 | M&L for 25mm thick PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in sub bases, floors and pavings etc, complete all as specified and directed. |
| 33 | M&L for joint free non skid ceramic coloured tiles, 7 to 8mm thick, (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement of match the surfaces over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed. |
| 34 | M&L for joint free non skid vitrified ceramic tiles, 10mm thick, light shade (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement of match over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed. |
| 35 | M&L for vitrified ceramic tiles, 10mm thick light shade (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.36 sqm, on vertical surfaces such as skirting dados etc. set and jointed in neat cement slurry and pointed in white or coloured cement of match over and including 10mm thick rendering in CM (1:4), complete all as specified and directed. |
| 36 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backin), removing serviceable tiles to store and rubbish off the premises, complete as specified and directed. |
| 37 | M&L for joint free non-skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement of match over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed. |
| 38 | M&L for joint free ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm, as in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement of match the surfaces over and including 10mm thick rendering in CM (1:4), complete all as specified and directed. |
| 39 | M&L for glazed ceramic coloured tiles in vertical surface 450 x 350 x 7mm/450 x 300x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in CM (1:4), complete all as specified and directed. |
| 40 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall, as PVC frame, as per specification, complete all as specified and as directed |
| 41 | S&F of solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame including 15mm thick rendering in CM (1:6) on other than fair faces of brick or concrete surfaces to receive PVC frame for wall lining, as per specifications, complete all as specified and as directed. |
| 42 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed. |
| 43 | S&F for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats Fe 410W (Gde E-250) quality-A, complete all as specified and as directed. |
| 44 | M&L for 4mm thick pre-painted E-fibre board, designer/decorative, fixed or laid/inserted to and including GI snap grid frame size 605mm x 605mm work for false ceiling fixed with hangers 4mm to 6mm dia. G.I. (length as required) adjusting level, fixed to roof slabs/truss by means of ceilling cleats made out of G.I. flat 40 x 3mm, size 60mm long and expansion hold fasteners, 12.5mm dia, 40mm long including necessary dismentaling of existing unserviceable ceiling boards of any thickness including cover fillets, complete all as specified and directed. |
| 45 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings including ridges hips valleys as in roof covering, complete all as specified and as directed. |
| 46 | S&F of pre painted galvatume aluminium zink coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws, complete all as specified and as directed. |
| 47 | Fixing only plain or corrugated steel sheeting, any gauge thickness including nainital or similar pattern roof covering, complete all as specifed and directed.(Note : Serviceable sheet obtained from dismantling shall be re-used) |
| 48 | S&F of pre painted galvatume aluminium zink coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws, complete all as specified and as directed. |
| 49 | S&F 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc, complete all as specified and as directed. |
| 50 | Taking down chowkat with shutter (without taking off shutter from the frame) exc 1.5 Sqm but n.exc 4 Sqm each, complete all as specified and directed. |
| 51 | S&F anodised aluminium frame, powder coated (minimum thickness of powder coating 50 micron) for doors, windows, ventilators, partitions etc with one or more rebates including joining cleat for fixing etc, complete all as specified and directed. |
| 52 | S&F anodised aluminium door shutters, powder coatedg (thickness or powder coating not less than 50 micron)aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc, complete all as specified and directed. |
| 53 | S&F aluminium mortice lock, vertical type, size 100mm (2 levers), complete all as specified and directed. |
| 54 | S&F double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, complete all as specified and directed. |
| 55 | S&F powder coated aluminium anodised (minimum thickness of powder coating 50 micron) three track sliding window frame with shutters with (2 nos glazed and one wire gauzed shutter) including all necessary joining cleats, hold fast, rubber gasket, snap beading and locking arrangements fixed with screws to wall etc. complete with glazing and including 5mm thick tinted glass to aluminium frame work using rubber gasket and including stainless steel wire cloth of 0.36mm dia & average width of aperture 1.40mm with staple or suitable fillets wire mesh fitted with screws and washers with the following section of frame and shutter, complete all as specified and directed. (A) Sections for shutter.(i) Vertical' section 38 x 20 x 1.5 mm thick. (ii) Interlock' section 38 x 20x 1.50 mm (iii) Top/ Bottom' section 41 x 20 x 1.50 mm thick.(B) Section for frame:-(i) Top & Sides 91.00 x 29.70 x 1.50 mm thick.(ii) Bottom 91.00 x 29.70 x 1.50 mm thick |
| 56 | S&F aluminium anodised powder coated (minimum thickness of powder coating not less than 50 micron) ventilator of size not exceeding 0.36 Sqm, fabricated from approved extruded aluminium sections, partly glazed with 5mm thick frosted glass and partly fitted with operable aluminium louvers glazed with 5mm thick frosted glass, complete with all necessary fittings, hinges, handles, locking arrangements, rubber gaskets, glazing clips, screws, sealant and other accessories fixed in position to walls including making good disturbed surfaces, complete all as directed and specified. |
| 57 | S&F 4 to 5mm thick ACP (aluminium composit panel) sheet in panels of aluminium partition, aluminium door exc. 0.5 Sqm in each pane with rubber beading, complete all as directed and specified. |
| 58 | Hacking out old broken glass any thickness size quality or description from metal frames including punching or drilling our old glazing pins/spring clips, complete all as specified and directed. |
| 59 | S&F 5.5mm thick selected quality plain sheet glass and glazing with and including anodised aluminium snap beading or rubber/neoprene bead, fixed in aluminium frame work n. exc. 0.5mm Sqm in each pane in square, complete all as specified and directed |
| 60 | S&F in repair galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with galvanised mild steel wire staples, complete all as specified and directed. |
| 61 | M&L for mild steel framed work such as grill, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barrel iron doors, ladders framed balusters, walks railings, frame work of water tanks and similar work conforming to Fe-290 (Gde E-165), complete all as specified and directed. |
| 62 | M & L for preparation of old painted steel surfaces of any description, over 10cm width or girth, not otherwise described and applying one coat of synthetic enamel paint (1st grade quality) , complete all as specified and directed. |
| 63 | M&L for providing and fixing built-in cupboard/cabinets of 18mm Pre-laminated MDF board for carcass and shutter, 25mm plywood for shelves and 6mm plywood for back panel including machine cut components, edge lipping/edge banding, internal shelves partitions, skirting/base support where required and all fittings and fixtures complete such as SS/brass hinges /soft close concealed hinges, telescopic channels for drawers where provided, locks, magnetic catches, handles/knobs, tower bolts as applicable adjustable shelf supports, screws, fastener and anchoring accessories and approved laminate/veneer/paint/polish finish to exposed surfaces and matching edge treatment including cutting, fitting, fixing, alignment, making good to adjoining surfaces, protection during construction, complete all as specified and directed. Note : Item shall be measured as finished front elevation area of cupboard in Sqm for payment. |
| 64 | S & F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet, complete all as specified and directed. |
| 65 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side prelam PVC sheet. Stile and rails feathered at edges for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of both side Prelam PVC sheet. to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable Prelam PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site, as per specification & drawing, complete all as specified and directed. |
| 66 | S&F clamps, hold fast, hook, washer & similar small articles, confirming to Fe-290, Gde E-165, complete all as specified and as directed. |
| 67 | S&F 150mm long aluminium anodised, barrel tower bolt of extruded section, complete all as specified and directed. |
| 68 | S&F 100mm size butt hinge, medium weight, cold rolled, mild steel, complete all as specified and directed. |
| 69 | S&F 200mm long extruded aluminium alloy handle, fabricated type, anodised, complete all as specified and directed. |
| 70 | M&L for preparation of new steel or iron surfaces of any description exc. 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint (1st grade quality) over a coat of red oxide primer, complete all as specified and as directed. |
| 71 | Taking down 20mm bore steel water tubing and connection from wall /ceiling surfaces including cleaning for re-fixing or removing from site of work, complete all as specified and directed. |
| 72 | S&F steel water tubing and connection, medium grade, 20mm bore with all fitting, fixed concealed to wall or ceiling or laid in floors, complete all as specified and directed. |
| 73 | S&F steel water tubing and connection, medium grade, 15mm bore with all fitting fixed concealed to wall or in ceiling complete, complete all as specified and directed. |
| 74 | M&L for cutting chases on wall surface, pinning in making good to facing where required and pointing in CM (1:3) to ends to facings where required and pointing in CM (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintel etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good as per existing surface cutting not exc 10cm girth in brick walls, complete all as specified and directed. |
| 75 | S&F 15mm bore angular stop cock, chromium plated, fancy typr, screwed down, high presure with crutch or butterfly handle screwed both ends for iron pipe or union, complete all as specified and directed. |
| 76 | S&F vitreous china ware wash hand basin white, flat back, size 550 x 400mm size (flat back) including PVC waste pipe 32mm dia waste coupling including cutting for and pinning ends of brackets or erecting stand including pedestal, complete all as specified. |
| 77 | S&F CP pillar tap, 15mm bore, capstan head, screwed down high pressure with or without lettered “hot’ or “ cold” with long screwed shanks and fly nuts screwed for iron pipe, complete all as specified and directed. |
| 78 | S&F 10 ltrs capacity low level valve less PVC syphonic action type flushing cistern, white, with inlet, ball valve, float and handle, 32mm dia flush pipe polyethylene or PVC including brackets and connection to pipe, complete all as specified and directed. |
| 79 | S & F 15mm bore, PVC connection pipe 600mm long with PTMT nuts at both ends, complete all as specified and directed. |
| 80 | S&F stainless steel, chromium plated toilet paper holder, box type, with CP screws, complete all as specified and directed. |
| 81 | S&F 600mm x 450mm bevelled edge mirror made of selected quality sheet glass not less than 5.5mm thick, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 82 | S&F health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.0 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and directed. |
| 83 | S & F in repair vitreous china urinal, bowl type flat back of size 465 x 355 x 265mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flushpipe and waste pipe) including urinal spreader, providing and fixing plugs, bedding urinal against wall in CM (1:2), securing urinal to plug with and including 60mm long brassscrews, pointing around urinal back, complete all as specified and directed. |
| 84 | S&F towel rail, 600mm long PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms), complete all as specified and directed |
| 85 | S & F in repair vitreous china wash down water closet pan (pedestal pattern), white (EWC) including plastic seat of same colour of WC and cover and mild steel chromium plated hinging device, complete all as specified and directed. |
| 86 | S & F 110mm bore PVC rain water pipes, single sockets, in any length with sealant rubber ring joints fixed to walls including necessary MS flat iron clamps of size (40 x 4mm), complete all as specified and directed. |
| 87 | S&F 110mm bore, PVC (SWR) slotted vent cowl, complete all as specified and directed. |
| 88 | S&F rotational moulded polyethylene (HDPE) water storage tanks, (made of 100% virgin and food grade plastic), triple layered, (cylindrical vertical with closed top) ISI marked, confirming to IS 12701-1996, hoisted and fixed in position all as specified in SSR Part I (500 ltr capacity) including 20mm Nipple suitable for HDPE water tank and 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed to 20mm bore pipe inculding taking down old unserviceable water tank of any capacity, complete all as specified and directed. |
| 89 | M&L for PVC(SWR) gully trap 125/110mm, setting and jointing with solvent cement, complete all as specified and directed. |
| 90 | Demolition of stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar, complete all as specified and directed |
| 91 | M&L for granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete, on floors, over and including 15mm thick screed bed of cement mortar (1:6), complete all as specified and directed. |
| 92 | M&L for granite (of any type) tiles 20mm thick machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete, over and including rendering 10mm thick in CM (1:4) as backing coat, complete all as specified and directed. |
| 93 | M&L for 75mm thick PCC (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection laid in alternate bays (n. exc. 2 Sqm each) and finished even and smooth without using extra cement including providing joints throughout the thickness of the plinth protection, filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight, complete all as specified and directed. |
| 94 | S&F collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed. |
| 95 | Supply only liquid water proofing compound conforming to IS: 2645 - 1975 specification, complete all as directed. |
| 96 | M & L PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) cast in situ in copings, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed including use and waste of form work, complete all as specified and directed |
| 97 | M & L for precast reinforced cement concrete (1:2:4), type B- 1 (using 20 mm graded stone aggregate) as in cover slabs (for manholes, drain etc) and similar articles with plain faces and set in cement mortar (1:4) including form work, complete all as specified and directed. (Note : Re-inforcement shall be measured and paid seperately) |
| 98 | Supply and laying in trenches of reinforced concrete pipes, class NP2, 150mm bore, laid and jointed with collars including testing, complete all as specified and directed. |
| 99 | M & L for PCC (1:3:6), type C 2, (using 40mm graded crushed stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150mm bore pipe, complete all as specified and directed. |
| 100 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc, complete all as specified and as directed |
| 101 | Cutting into existing manholes for connecting new drains, making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 round section) in PCC (1:2:4) type B1, smooth finished and reforming benching as required for 150mm bore pipe, complete all as specified and directed. |
| 102 | M & L for point wiring complete with PVC insulated unsheathed, 1100 volts grade cable 1.5 Sqmm (nominal area) FRLSH type multi stranded copper conductor, single core drawn in and including concealed, rigid PVC conduit (ISI marked) not less than 20mm dia, medium grade, including all conduit accessories with and including concealed modular box of suitable size for mounting modular switch, sockets, fan regulator etc including 1.5 Sqmm FRLSH type PVC insulated unsheathed cable multi-stranded copper conductor as continuous earth wire and connected to earth dolly as required at site & including chases cutting & making good disturbed surface & applying finishes to match existing surface etc. for one light/fan point controlled by one, one way switch single pole, complete all as specified and directed.Note: - (i) Rate quoted shall deemed to be included for cost of modular box (as per number of module of outer cover) and concealed in wall including cutting and sinking of boxes and making good to the walls. (ii) Provision of blank plates as per site requirement, shall deemed to be included in the unit quoted rate. |
| 103 | All as per item No 101.00 here-in before but for 3 pin 5/6 Amp socket point on same board, complete all as specified and directed. |
| 104 | All as per item No 101.00 here-in before but for 3 pin 5/6 Amp socket point on independent board, complete all as specified and directed. |
| 105 | All as per item No 101.00 here-in before but with 4.0 Sqmm PVC insulated unsheathed multi stranded cable FRLSH type for one 3 pin socket outlet 15 Amp, independent including PVC insulated 4.0 Sqmm FRLSH type copper multi stranded conductor as earth wire including steel box of required for modular switches/sockets for 3 pin socket outlet point, 15 Amp on independent board and industrial socket for geyser, complete all as specified and directed. |
| 106 | S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep, min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) including electronic modular type regulator (2 module), completes all as specified and directed. |
| 107 | S&F exhaust fan, steel body, AC, single phase, 230V of size 300mm sweep with, blades, frame and louvers including cutting wall for fixing exhaust fan and making good the opening in CM (1:3) or PCC (1:2:4) type B1 as required at site, completes all as specified and directed. |
| 108 | S&F switch, modular type, single pole, one way, 5/6 Amp, one module, complete all as specified and directed. |
| 109 | S&F switch, modular type, single pole, one way, 15/16 Amps, one module, complete all as specified and directed. |
| 110 | S&F socket outlet, modular type, multipurpose, having provision for 2/3 pin, 5/6 Amp, combined, two module, complete all as specified and directed. |
| 111 | S&F socket outlet, modular type, multipurpose having provision for 3 pin, 15/16 Amp and 3 pin 5/6 Amp, combined, two module, complete all as specified and directed. |
| 112 | S&F modular white cover plate with frame, 2 module, completes all as specified and directed. |
| 113 | S&F modular white cover plate with frame, 3 module, completes all as specified and directed. |
| 114 | S&F modular white cover plate with frame, 8 module, completes all as specified and directed. |
| 115 | S&F ceiling rose of size 65 x 50mm surface bakelite 240 Volts, three terminal, complete all as specified and directed. |
| 116 | S&F in repair LED lights fitting 1 x 20 W, 220V, AC , box type with driver, LED lighting fixture with extruded aluminium channel, including LED tube light connecting up with 3 core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed. |
| 117 | S&F in repair LED light fitting, mirror type with high output diffuser 2 feet, 10 watt 220 V, AC, decorative type with driver, LED tube light of 10 watt connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, completes all as specified and directed. |
| 118 | S&F LED luminaire 35/36 watt, 220 V, AC recessed mounted fitting, energy efficient, decorative type suitable for armstrong/grid ceiling, with and including its super bright 35/36 W LED lamp, high upto 18m complete with all accessories pre-wired including connecting up with twin core flexible copper conductor cables of suitable size, complete all as specified and directed. |
| 119 | S&F MCB distribution board (DB), SPN with sheet metal encloser, double door, IP 43 protection, 240 volts, 12 way, with rated copper busbar (as per OEM) neutral link for fixing MCBs/Isolators including taking down old unserviceable MCB DB of any description, completes all as specified and directed. |
| 120 | S&F MCB distribution board (DB), SPN with sheet metal encloser, double door, IP 43 protection, 240 volts, 4 way, with rated copper busbar (as per OEM) neutral link for fixing MCBs/Isolators including taking down old unserviceable MCB DB of any description, completes all as specified and directed. |
| 121 | S&F MCB SP 6 to 32 Amps, 240V, 10 KA, 'C' curve, including connection and testing, completes all as specified and directed. |
| 122 | S&F MCB SPN 6 to 32 Amps, 10 KA, 'C' curve, including connection and testing, complete all as specified and directed. |
| 123 | S&F MCB TPN 40 to 63 Amps, 10 KA, 'C' curve, including connection and testing, complete all as specified and directed. |
| 124 | M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6.0mm thick buried directly in ground vertically to a depth not less than 2.25 meter below ground level with top edge of earth plate at a depth not less than 1.5 meter below ground level, earth plate surrounded by 15cm thick packed layer of charcoal dust and common salt, connected to galvanized earth lead wire 4mm thick dia by means of bolts, nuts and washers of galvanized iron or steel and thimbles and other end of the earth wire connected to earthing test point/equipment and protected by galvanized iron pipe light grade 20mm bore, up to earthing test point/equipment fixed with required number of mild steel clamp made out of 25mm x 3mm flat iron and perforated water pipe 20mm dia. GI medium grade of length 2.25 meter and top with socket & plug and bottom connected to earth plate by slit and two bolts/nuts/washers, PCC chamber in PCC (1:2:4) type B-1 and 40mm thick pre-cast RCC (1:2:4) type B-0 cover reinforcement with 40mm x 40mm x 6mm MS angle iron frame of size 25mm x 25mm, excavation & earth work complete all as shown in electrical plate No. 3 of MES Schedule Part-I of SSR-2009 connected to main switch board and testing on completion, all as specified and directed. |
| 125 | S&F LED building security light fitting 30 Watt made up of pressure die cast housing with toughened glass and individual high power LEDs with secondary optics, IP66 protection and impact resistance of IK07, complete pre-wired and connecting up with suitable twin core flexible copper wire including provision of necessary GI pipe as bracket, medium grade, 25mm/ 40mm bore pipe (as per the model of light fittings) upto 1.5 Mtr length, bend to shape with necessary clamps made out of mild steel, nuts and bolts etc. including two coats of synthetic enamel paint over a coat of red oxide primer on exposed steel surfaces foe fixing the fitting to bldg etc, complete all as specified and directed. |
| 126 | Supply and install air conditioner 2 ton capacity hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser for better indoor air quality with minimum 4 star rating and EER 3.2 of capacity, complete all as specified and directed. |
| 127 | M&L for submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor cable 4 Sqmm, 1100Volts grade, FRLSH type, drawn in and including heavy duty rigid PVC conceald conduit (ISI marked) not less than 20mm dia with fixing accessories including 4 Sqmm 1100 Volts grade, FRLSH type, PVC insulated unsheathed multistranded flexible copper conductor cable as continuous earth wire and connecting to common earth dolly including taking down old unserviceable submain wiring, complete all as specified and directed.Note: (i) Two runs of single core cable with one run of earth continuity conductor including PVC conduit shall be measured and paid as one length.(ii) Cutting chases for conduit, sinking of boxes and making good to wall/floors etc shall deemed to be included in the quoted rate. |
| 128 | S&F power unit suitable for load max up to 3.5 KW including 2 module box and cover plate for mounting of power unit, complete as specified and directed. |
| 129 | S&F in repair modular surface mounting plastic box of size 3'' x 3'', 1 & 2 module, completes all as specified and directed. |
| 130 | Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sqmm 2 core, complete all as specified and directed. |
| 131 | Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sqmm 4 core, complete all as specified and directed. |
| 132 | Excavation in trenches not exceeding 1.5 metre wide and not exc 1.5 metre in depth for foundation or cable trenches, shafts, wells cesspits, manholes, pier holes etc. n. exc. 10 Sqm on plan and getting out in soft/loose soil, complete all as specified and directed. |
| 133 | Removing of excavated materials to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 metre above the starting point in any type of soil, complete all as specified and directed. |
| 134 | Returning filling in incl spreading, leveling watering and well ramming in layers not exceeding 25cm in soft/loose soil, complete all as specified and directed. |
| 135 | Supply and laying double walled corrugated (DWC) HDPE duct pipe of 40mm dia (outer) conforming to IS, approved colour complete with fittings for cable protection, complete all as specified and directed. |
| 136 | Supply, laying, jointing and testing three layer, PP-R (polyprolene random copolymer) pipes 50mm dia SDR 7.4 (PN-16) confirming to IS -15801 : 2008, UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including PP-R plain & brass threaded polypropylene random fittings laid in trenches, complete all as specified and directed. |
| 137 | Supply, laying, jointing and testing three layer, PP-R (polyprolene random copolymer) pipes 32mm dia SDR 7.4 (PN-16) confirming to IS -15801 : 2008, UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including PP-R plain & brass threaded polypropylene random fittings laid in trenches, complete all as specified and directed. |
| 138 | S&F 32mm dia PP-R gate valve (brass insert) confirming to IS -15801 : 2008, complete all as specified and directed. |
| 139 | Note: An amount of Rs.32,900.00 on account of Credit Schedule for schedule 'A' part - II shall be deducted from the total amount of BOQ to arrive at the contract sum. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysOct 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender