Public Administrative Department Government Departments Closing in 5 days TDR #57768384

Tender For General-Construction Of Fencing In Uchakkada Market In Ward 19 Of Kottukal Gp-Klgp/266/2026-27-General Civil Work

Issued by Government Departments · Thiruvananthapuram, Kerala
Tender Value
7.80 Lakhs
Estimated cost
Bid Submission
08 Oct 2026
5 days left
EMD
19502
Bank guarantee accepted
Document Fee
1720
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvananthapuram → Kerala
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for General-Construction Of Fencing In Uchakkada Market In Ward 19 Of Kottukal Gp-Klgp/266/2026-27-General Civil Work

BOQ

Name of Work:- GENERAL-Construction of Fencing in uchakkada market in Ward 19 of Kottukal GP-KLGP/266/2026-27-General Civil Work
Sl. No. Item Description
1fencing
22.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
34.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
4OD544680/2025-2026:Dry rubble masonry with hard stone in foundation and plinth levelling up to plinth level
54.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
610.2:Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
716.70.2:Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts , bolts and washers as required complete as per the direction of Engineer-in- charge.Made of G.I wire of dia 4 mm. PVC coated to achieve outer dia. not less than 5 mm in required colour and shade
816.78.1:Construction of granular sub- base by Providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, Carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in- Charge.With Material conforming to Grade - I ( size range 75 mm to 0.075 mm) having CBR Value- 30
916.68:Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
1050.6.1.7:Solid block masonry using pre cast solid blocks ( Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15 cm in : CM 1:6 ( 1 cement : 6 coarse sand ) etc complete
116.2.1:Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand)
125.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers
135.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
145.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size derived from natural sources)
1513.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
1613.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
1713.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work
18OD539388/2025-2026::Supplying and fixing granite name board 75*60 cm size on brick wall with engravingletters as per the direction Dept Enginieers Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57768384
AUTHORITY Government Departments
TENDER VALUE 7.80 Lakhs
LAST DATE 08-10-2026
Authority
Authority Name Local Self Government Department
Work Description Tender for General-Construction Of Fencing In Uchakkada Market In Ward 19 Of Kottukal Gp-Klgp/266/2026-27-General Civil Work
Basic Detail
Tender No 12/AE/KTL/27
Bidding Type Tender
Location
City Thiruvananthapuram
State Kerala
Key Dates
Publish Date 29 Sep 2026
Submission Date 08 Oct 2026
Open Date 12 Oct 2026
Finance
Tender Value 7.80 Lakhs
Tender Fee 1720
EMD 19502
Exemption Available
Document List
BOQ_1483192.xls
ca090441-9c12-40bb-b07e-aab02a247b72.html
sbd266.pdf
Tendernotice_1 (22).pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Sep 29, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Oct 08, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 5 days
Oct 12, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 9 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_1483192.xls

html

ca090441-9c12-40bb-b07e-aab02a247b72.html

pdf

sbd266.pdf

pdf

Tendernotice_1 (22).pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders