Tender For Supply Installation Testing and Commissioning of Online Booster Pumping Station With Allied E/M Works At Ratiya Marg Under Sangam Vihar Constituency Ac 49.

Sharing tender

Tender for Supply Installation Testing and Commissioning of Online Booster Pumping Station With Allied E/M Works At Ratiya Marg Under Sangam Vihar Constituency Ac 49. , Section-A: Pumping Machinery Procurement Of Single-Stage, Horizontal, With Axially Spilt Volute Casing Pump Comprising Of Impeller, Neck Ring & Casing (Grey Cast Iron), Mechanical Seal, Shaft & Sleeve (Ss-410) With Suitable Bearing Having Following Parameters: Discharge - 245 M3/Hr, Head - 45 M, Size - 200 X 150 Mm. Make: M&P/Ksb/Djb Approved Coupled With Squirrel Cage Induction Motor (Ie2) 60 Hp With Enclosure Conforming To Protection Ip 55 Horizontal Foot Mounted (B3),Continuously Rated (S1) Suitable For Operation On 415+ 10% V,3 Phase 50Hz+ 5% Ac Supply With Ambient 50ºc,Class F Insulation With Temperature Rise Limited To Class B Altitude Less Than 1000 M Above M.S.L. Performance Efficiency Values Are Conforming To Is12615 / Is/Iec 60034. Make: Crompton/Kec/Bbl/Djb Approved.The Complete Pump Set Shall Be Provided With Base Frame, Coupling & Coupling Guard. , Supply Of Spare Squirrel Cage Induction Motor (Ie2) 60 Hp With Enclosure Conforming To Protection Ip 55 Horizontal Foot Mounted (B3),Continuously Rated (S1) Suitable For Operation On 415+ 10% V,3 Phase 50Hz+ 5% Ac Supply With Ambient 50ºc,Class F Insulation With Temperature Rise Limited To Class B Altitude Less Than 1000 M Above M.S.L. Performance Efficiency Values Are Conforming To Is12615 / Is/Iec 60034. Make: Crompton/Kec/Bbl/Djb Approved. Sor 3.22.17 , Supply Of 10 Hp Submersible Dewatering Pump Set. Sor 2.1.7 Make: Djb Approved. , Supply Of 5 Hp Submersible Dewatering Pump Set. Sor 2.1.5 Make: Djb Approved. , Providing And Fixing Of Gi Pipe 50 Mm Dia Along With Gi Fittings And Accessories For Guiding Water Outside The Pumphouse. , Making Of Complete New Reinforced Cement Concrete Foundation For Pump Set. Fixing Of New Foundation Bolts By Tiging/Welding Of Foundation Bolts With New M.S Jall Of At Least 16 Sqmm & Filling Of Reinforced Cement Concrete Material In The Complete Foundation Including Welding, Shuttering And Plastering As Per Requirement. , Foundation Bolts 16 Mm Dia × 450 Mm With Nuts & Washers , Rubber Insulation Sheet. Djb Sor 22.6.1 , Ms Nuts, Bolts And Washers , Section-B: Mechanical Piping & Valves 300 Mm Dia Ms Suction Pipeline Pn 1.0 Including Fabrication, Welding, Flanges, Erection And Painting Djb Plg , 200 Mm Dia Ms Delivery Pipeline Pn 1.0 Including Fabrication, Welding, Flanges, Erection And Painting Djb Plg , 150 Mm Dia Ms Delivery Pipeline Pn 1.0 Including Fabrication, Welding, Flanges, Erection And Painting Djb Plg , 200 Mm Pn 1.0 Sluice Valve. Make - Djb Approved. Sor 4.22.5 , 150 Mm Pn 1.0 Sluice Valve. Make - Djb Approved Sor 4.22.4 , 150 Mm Pn 1.0 Non-Return Valve. Make - Djb Approved Sor 4.23.4 , 200 Mm Pn 1.0 Dismantling Joint Djb Plg , 150 Mm Pn 1.0 Dismantling Joint Djb Plg , Pressure Gauge 150 Mm With Isolating Cock , Ms Pipe Supports, Anchor Supports, Clamps And Saddles , Ht Nuts, Bolts, Washers, Rubber Insertion Gaskets Etc. , Painting Of Exposed Pipelines And Fittings And All Ms Structure. , Section-C: 2 Ton Eot Crane & Structural Steel Supply Of Electric Wire Rope Hoist Capacity 2 Ton With 6 Mtr Lift Along With Ct Brake, Limit Switch And Power Trolley. Make-Globe/Indef/Morris/Reva/Djb Approved , Dismantling/Breaking Of The Wall For Making Space For Free Movement Of Equipment With The Help Of Pneumatic Concrete Breaker, Hammer, Tools And Tackles, Heavy Manual Labour Etc. As Per Site Requirement And Direction Of Engineer-In-Charge , Making/Fabrication The Ms Door/Window Of Two Panel Whose Frame Shall Be Made Out Of Ms Angle And Panels Covered With Ms Sheet. Heavy Duty Hinges Shall Be Provided Duly Welded. This Work Also Includes Civil Work, Welding Work, Manual/Heavy Labor, Cutting, Grinding, Finishing Etc. As Per Site Requirement And As Per Direction Of Engineer In Charge. , Providing And Fixing Of Ms Structure Including Main Gantry Girder, Gantry Pillars & Horizontal Support For The Complete Work, Providing And Fixing Of Support Plates & Horizontal Support With Making Of Pits Along With Civil Work And Grouting Of Foundation Bolts With Chemical & Reinforced Cement Concrete Work. Including The Cost Of Foundation Bolts. , Pvc Cable For Hoist To Main Supply Arrangement With Electrical Accessories. , Cable Trolley & Support Wire Along With I-Bolts, Clamp & Other Accessories , Section-D: Power Cables Supply Of Single Core 50 Sqmm Flexible Copper Cable. Make: Djb Approved , Supply Of 10 Sqmm Flexible Single Core Copper Cable. Make: Djb Approved , Cable Glands, Lugs, Thimbles, Ferrules, Termination Kits And Accessories Including Laying And Making Connection Of Motor And Panel. , Section-E: Cable Tray System 450 Mm X 50 Mm X 2 Mm Hdg Perforated Cable Tray. Sor 34.1.6 , Ms/Unistrut Cable Tray Supports , Vertical Risers, Bends And Accessories , Earthing Of Cable Trays , Section-F: Lt Panel & Motor Control Centre Providing, Designing, Manufacturing And Supplying Of Floor Mounted Indoor Lt Motor Control Centre (Mcc) Panel Of Suitable Size Fabricated From 2.0 Mm Thick Crca Sheet, Ip-54 Protection, Floor Mounted, Compartmentalized, Dust & Vermin Proof, Powder Coated After Seven Tank Treatment With Minimum 80 Micron Epoxy Polyester Coating, Complete With Base Frame, Cable Alley, Detachable Gland Plates, Neoprene Rubber Gasket, Concealed Hinges, Removable Rear Covers, Lifting Hooks, Locking Arrangement, Complete Internal Wiring And All Accessories. Panel Body: 2 Mm Thick Crca Fabricated Cubicle With Powder Coating - 1 Set; 75×40×6 Mm Ismc/Ms Base Frame - 1 Set; Ms Stand Fabricated From 50×50×6 Mm Ms Angle - 1 Set; Cable Alley With Removable Gland Plates - 1 Set; Polycarbonate Meter Window - 1 No.; Lockable Doors With Concealed Hinges - Complete; Door Earthing Copper Braids - All Doors; Led Panel Illumination Lamps - 2 Nos.; Exhaust Fans With Filters - 2 Nos.; Anti-Condensation Heater 100W With Thermostat - 1 Set; 5A Service Socket - 2 Nos.; Mimic Diagram - 1 No.; Name Plate & Danger Plate - Complete. Busbar System: 400A Electrolytic Aluminium Bus Bars (Rybn), 36Ka - 1 Set; Copper Neutral Bus - 1 No.; Copper Earth Bus - 1 No.; Smc/Dmc Busbar Supports - 1 Set; Heat Shrink Sleeves - Complete. Incoming Section: 400A, 4 Pole Mccb, 36Ka, Thermal Magnetic Adjustable With Rotary Handle & Door Interlock - 1 No.; Digital Va Meter With Auto/Manual Selector Switch - 1 No.; Earth Leakage Relay With Cbct - 1 No.; Led Indication Lamps Ryb - 3 Nos.; Led Indication Lamps Rga (On/Off/Trip) - 3 Nos.; Phase Failure & Phase Sequence Relay - 1 No.; 6A Sp Mcb C Curve - 3 Nos.; 6A Dp Mcb C Curve - 3 Nos.; Ct 400/5A With Ass - 3 Nos.; Four Pole On-Load Changeover Switch 400A - 1 No. 60 Hp Star-Delta Starter: Complete Starter/Feeder Suitable For 60 Hp Motor Comprising 160A/125A 3P Mccb Motor Protection - 3 Nos.; Mccb Spreader Links - 3 Nos.; Mccb Extended Rotary Handles - 3 Nos.; Suitably Rated 3P Power Contactors - 9 Nos.; Thermal Overload Relays Suitable For 60 Hp Motor Flc - 3 Nos.; Single Phase/Phase Reversal Protection - 3 Nos.; Digital Va Meters With Auto/Manual Selector - 3 Nos.; Led Indication Lamps Rga (On/Off/Trip) - 9 Nos.; Start/Stop Push Buttons With No & Nc Element - 6 Nos.; Star-Delta Timers - 3 Nos.; 6A Dp Mcb C Curve - 3 Nos. 10 Hp Dol Starter: Complete - 1 No., Comprising Suitably Rated 3P Mccb/Mcb - 1 No.; Digital Va Meter - 1 No.; Thermal Overload Relay Suitable For 10 Hp Motor - 1 No.; 3P Power Contactor - 1 No.; Led Indication Lamps Rga (On/Off/Trip) - 3 Nos.; Start/Stop Push Buttons With No & Nc Element - 2 Nos.; 6A Dp Mcb C Curve - 1 No. 5 Hp Dol Starter: Complete - 1 No., Comprising 32A 3P Mcb - 1 No.; Digital Va Meter - 1 No.; Thermal Overload Relay 10-14A - 1 No.; Mnx 32A 3P Power Contactor - 1 No.; Led Indication Lamps Rga (On/Off/Trip) - 3 Nos.; Start/Stop Push Buttons With No & Nc Element - 2 Nos.; 6A Dp Mcb C Curve - 1 No. Lighting Section: 6 Nos. 10A Sp Mcb For Lights/Fans - 1 Set. Miscellaneous: Aluminium Electrolytic-Grade Busbars Covered With Heat-Shrinkable Pvc Sleeves, Cable Ferrules, Terminal Blocks, Internal Wiring, Ms Stand Fabricated From 50×50×6 Mm Angle, 400A Four-Pole On-Load Changeover Switch, Civil Work If Required, Loading, Unloading, Transportation, Hydra/Crane Charges, Cable Termination With Thimbles, All Safety Arrangements Complete. The Panel Shall Also Include Suitable Power Capacitors. All Items Used In Manufacturing Of Panel Shall Be Of Djb-Approved/Acceptable Make. , Section-G: Internal & External Electrification 45 W Led Street Lights With Gi Brackets. Make - Djb Approved . , 10 W Led Bulkhead Lights. Make - Djb Approved , 63 W Led High-Bay Fixtures. Make - Djb Approved , 600 Mm Industrial Exhaust Fans. Make - Djb Approved. Sor 20.2.4 , 600 Mm Wall-Mounted Air Circulators. Make - Havells/Cg/Almonard. Sor 20.3.2 , Complete Frls Copper Wiring In Heavy-Duty Conduit , Modular Switches, Sockets And Accessories , Lighting Distribution Board 8 Way, Double Door, Tpn. , Lighting Cables And Wiring , Industrial 6A/16A Socket Outlets , Emergency Led Lights , Led Exit Sign Boards , Section-H: Earthing System Chemical Earthing Station For Mcc Panel , Chemical Earthing Station For Pumps & Equipment , Gi Strip 25 × 5 Mm Earthing Network. Sor 35.9.1 , Earth-Pit Interconnection, By Using Clamps, Hardware Items Etc , Section-I: Miscellaneous, Testing & Commissioning Supply Of Co2 Type Fire Extinguishers 6.5 Kg. Make: Flameklog/Lifeguard/Djb Approved Sor 24.2.1 , Supply Of Fire Buckets With Stand. Sor 24.4.1 & 24.4.2 , Equipment Name Plates, Danger Boards And Safety Signage And Pump House Sign Boards. All Shall Be Retro-Reflective. , Transportation, Loading, Unloading And Handling Of Materials , Installation, Testing & Commissioning Of Complete Online Booster Pumping Station (Bps) Including Pumping Machinery, Suction/Delivery Piping And Valves, Eot Crane, Mcc/Lt Panel, Power/Control Cables, Cable Trays, Internal & External Electrification, Earthing System And All Allied E&M Equipment; Including Alignment, Interconnections, Continuity/Insulation/Earth Tests, No-Load And Full-Load Trial, Hydraulic/Mechanical/Performance Testing And Successful Commissioning Of The Complete Bps As Per Site Requirement And Direction Of Engineer-In-Charge. Also Including Ga Drawings, Foundation Drawings, Test Certificates, O&M Manuals And Handing Over Of Complete Bps. Note- Any Other Items,Accessories,Material Except As Mentioned Above Required For Commissioning Of Pump House Sahll Be Provided By The Firm/Contractor Without Any Extra Cost To The Djb.