Tender for Tender for Reconstruction, Maintenance, And Painting Work At Hindu Vidyalaya Inter College, Jaswantnagar (Jaswantnagar Development Block, Etawah) Under The Project Alankar Scheme
Tender Value
36 Lakhs
Estimated cost
Bid Submission
05 Oct 2026
2 days left
EMD
3.60 Lakhs
Bank guarantee accepted
Document Fee
2715
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Etawah → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Reconstruction, Maintenance, And Painting Work At Hindu Vidyalaya Inter College, Jaswantnagar (Jaswantnagar Development Block, Etawah) Under The Project Alankar Scheme
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing RCC Work Manualiy by mechanical means including Stacking of Steel bar and disposal of unseviceable material with in 50m lead as per direction of Engineer-in-charge CH-17 No 15.3 |
| 2 | R.C.C. work with cement approved coarse sand and 2 cm gauge approved stone ballast in the proportion of 1:2:4 in lintels of doors & window excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B,W.G.G.I. binding wire and including necessary crentering & shuttering etc. and also including supply of all material labour and T&P etc. required for proper completion of the work. binding wire cost being included in the item. As in item No. 283 above but for slabs |
| 3 | Mild Steel or iron in plain work such as reinforced concrete or reinforcement brick work (when not included in an over all rates) wrought to required shape as necessary including benefit for proper completion fo the work and including supply of all steel and wastage and over lappign and hooks. Ch-10 No 504 |
| 4 | Cement concrete with 4 cm gauge approved stone ballast approved coarse sand cement in the proportion of 4:2:1 including supply of all material T&P etc. required for proper completion of work. As in item (279) above but in the proportion of 8:4:1 |
| 5 | First class brick work in 1:6 cement and fine sand of 1.25 F.M. mortar in foundation plinth including supply of all materials, labour and T&P etc. required for proper completion of work. Same as above in item No. 303 but in at coarse sand 1:6 |
| 6 | First class brick work in 1:6 cement and fine sand of 1.25 F.M. mortar in foundation plinth including supply of all materials, labour and T&P etc. required for proper completion of work. Same as above in item No. 303 but in at coarse sand 1:6 . As in item 303 above but in superstructure, including necessary cutting and moulding of bricks as required and also including honey comb brick work thickness wall not to be less than 1½ brick thick. Add for extra labour to above items. |
| 7 | 12mm Cement plaster with cement mortar in proportion of 1:6 cement & coarse sand of single coat for interior plastering upto floor two level including internal rounded angles chamfers, and rounded angles not exceeding 80mm in girth and finished even and smooth. ch-13 no-13.4 |
| 8 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under,including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all completeas per direction of Engineer-in-Charge. ch-18, no-14.1 |
| 9 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone of size 40mm nominal size) laid in one layer finished with floating coat of neat cement (40mm thick floor) Ch-14,no-665 |
| 10 | Precast terrazzo tiles 20mm thick with white, black or white and black marble chip of sizes upto 6mm laid in floors, treads of steps and landing on bed of 25mm average thickness of cement mortar 1:3 (cement : coarse sand) joined with neat cement slurry mixed with pigment to match the shade of tile including rubbing an polishing complete with precast tiles of Ch- 14., No-14.18 |
| 11 | Providing and fixng glass strips of 3.15 mm (1/8\\") thick ness in joints of floor ans skirtings at the time laying floors, flush with floor level including labour Tools and plants etc. complete. |
| 12 | M.S. or iron work of small sizes and section such as holding down bolts, hold fast, tieods grading etc. wrought to required from including supply to steel bolt, nuts wastage etc and their fixing required for proper completion of the work. Same as in items 502 above but steel Z section window excludingt glass panes. |
| 13 | Same as in item 502 above but in M.S. Grills & stair case raillling |
| 14 | Finishing walls with Premium Acrylic Smooth exterior paint of requried shade old work (Two or more coats applied @ 1.67 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.2 kg/10 sqm) . As per SI 13.46.1 |
| 15 | Provinding and fixing glass panes with putty and glazing clips in steel doors, windows,clerestory windows all complete with : 4.0 mm thick panes. |
| 16 | Painting 02Coat work in small areas of old wood/iron work with two coat on previously painted old wood or iron work including its sand papering, rubbing and cleaning as required for proper completion of work. As per SI no 643. |
| 17 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 15 mm nominal dia Pipes |
| 18 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 20 mm nominal dia Pipes |
| 19 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 25 mm nominal dia Pipes |
| 20 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 21 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern |
| 22 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the wallswherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps |
| 23 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1 st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.including ISI marked Stainless Steel butt hinges with necessary screws, Steel Handels, Siliding bolt, Door Stopper and tower bolt. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysOct 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender