Tender For Repair To Plinth Protection, Roof Treatment Joinery And Other Connected B/R Allied Works In Otm And Md Accn In Domestic Area At Afs Yelahanka.
Tender Value
75 Lakhs
Estimated cost
Bid Submission
26 Oct 2026
23 days left
EMD
1.37 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Plinth Protection, Roof Treatment Joinery And Other Connected B/R Allied Works In Otm And Md Accn In Domestic Area At Afs Yelahanka.
BOQ
| Sl. No. | Item Description |
| 1 | Material & Labour for removing the existing unserviceable tar felt or any type of roof treatment of any description and any thickness from roof slab along with screed bed and PCC including cleaning the surface etc and removing debries from the site complete all as specified & directed. |
| 2 | Material and labour for rendering 15mm thick (average) in cement mortar 1:4 on roof surfaces mixed with water proofing compound as per manufacturer's instructions, finished even and smooth without using extra cement complete all as specified and directed.Note:- supply only of water proofing compound will be measured and paid seperately under relevant item |
| 3 | Supply only approved integral water proofing compound.Make : conplast x 421 IC of M/s Foroc Chemical (IndIa) Ltd or its equivalent of make Dr Fixit/ STP Ltd. |
| 4 | Material & Labour for laying/fixing TPO membrane of non flammable water proofing of roof which shall be a 1.50 mm thick loose laid membrane using FOSROC Proofex ORG membrane or its equivalent in STP/CIPY/SIKA/PIDILITE DR FIXIT, in layers overlapped to achive a minimum weld of 110mm. Hot air welding can be either hand appiled or by means of automatic machines and the rolle either end are overlapped with 110mm are in staggered position and the membrane shall be laid over the layers of non woven geotextile fiber. The separation layer provided to prevent the mechanical abrasion and and cushioning between the fosroc proofex ORG and the concrete sub structure. The termination of Fosroc Proofex ORG by aluminium strip anchoring. Note: Work shall be executed by authorized applicator with prior experience of more than 5 years on applying similar system. |
| 5 | Material & Labour for Applying oil bounded bitumen primer @ 0.20 Kg/Sqm, and providing 3mm thick APP modified water proofing membrane weighing not less then 3.0 Kg/Sqm, reinforced with non woven polyester matt weighing not less then 160 gm/sqm having softening point not less then 150 degree centigrade, having tensile strength of 650 N/5 cm and 350 N/5cm in longitudinal and transverse directions respectively of the reinforcement, trearing strength of 180 N by torch- on application including min 10cm side over lap & 15 cm end laps. Applying a coat of blown grade hot bitumen 90/15 over the membrane @ 1.2 Kg/sqm as per the detailed specifications. Note : The laying/ applying of APP membrane and other connected work shall be carried out by the approved applicator of the manufacturing company of APP membrane. |
| 6 | Removal and cleaning of vegetation, fungus, moss small trees etc from the roof top, chajja and removing spoils to a distance n.exc 100 m from the periphery of the single/Double story building. |
| 7 | Taking down door chowkats or frames not exceeding 1.5 sqm with shutters (without taking off shutters from the frame) of any description complete all as specified and directed. |
| 8 | Taking down door chowkats or frames exceeding 1.5 sqm but not exceeding 4 Sqm with shutters (without taking off shutters from the frame) of any description complete all as specified and directed. |
| 9 | Taking down shutters of any description exc 1sqm and n.exc 2sqm each complete all as specified and directed. |
| 10 | Taking down shutters of any description and refixing in the same opening after necessary easing and cutting complete all as specified and directed. |
| 11 | Supply & Fixing for 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue, pinned at joints complete all as specified and directed. |
| 12 | Supply & Fixing for for 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 13 | Factory made, 35 mm thick, panelled shutter second class hard wood, plain framed,hammer marked, with lock rail. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 14 | Supply & Fixing for 35 mm thick second class hard wood glazed and skeleton shutter for doors open rebated and prepared to receive glass, gauge etc divided into squares with plain chamfered or mitered and rebated sash bars any number, edges or framing, plain chamfered or rounded fitted with beads for securing glass gauge size of members of shutters as specified in SSR part- I ,Section 8,clause 8.24 and fitted to chowkats complete all as specified and directed. |
| 15 | Material & Labour for preparing new or previously untreated wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 16 | Material & Labour for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet reinforced with M.S. Square tube, suppling & fixing edges will be painted to match with prelam sheet complete all as specified and directed. |
| 17 | Supply & Fixing for Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 18 | Supply & Fixing in repair 300 mm ordinary rat rail rod pattern springs incl roller and roller plate complete all as specified and directed. |
| 19 | Supply & Fixing for aluminium handle 150mm cast type anodised.(ISI marked) complete all as specified and directed. |
| 20 | Supply & Fixing for aluminium handle 125mm cast type anodised.(ISI marked) complete all as specified and directed. |
| 21 | Supply & Fixing for aluminium anodised, barrel tower bolt 150mm of extruded section.(ISI marked) complete all as specified and directed. |
| 22 | Supply & Fixing for aluminium anodised, barrel tower bolt 100mm of extruded section.(ISI marked) complete all as specified and directed. |
| 23 | Supply & Fixing for aluminium alloy anodised, sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheets , cast or extracted section and fixing bolt and sliding bolts of extracted section.(ISI marked) complete all as specified and directed. |
| 24 | Supply and fix floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor 150 mm size of cover plate complete all as specified and directed. |
| 25 | Supply & Fixing for Butt hinges, medium weight, cold rolled, mild steel 100mm long (ISI marked), complete all as specified and directed. |
| 26 | Supply & Fixing for Butt hinges, medium weight, cold rolled, mild steel 75mm long (ISI marked), complete all as specified. |
| 27 | Material & Labour for Non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile including screed bed 15 mm thick in CM (1:6) including dismantaling complete all as specified and directed. |
| 28 | Material & Labour for Glazed coloured Ceramic tiles of size 300mmx450mm thickness 7 to 8 mm thick set and jointed in neat cement slurry incl matching PVC corner beadingand pointed in white or colour cement to match as in skirting/dado over 10 mm thick rendering in CM 1:4 finished including dismantaling complete all as specified and directed. |
| 29 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed. |
| 30 | Material & Labour for Brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and directed. |
| 31 | Material & Labour for vitrified ceramic tiles light shed 10 mm thick (square / rectangular) polished ,area of each tile not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including bedding layer of 15 mm thick in CM (1:6) complete all as specified and directed. |
| 32 | Material & Labour for vitrified ceramic tiles light shed 10 mm thick (square / rectangular) polished ,area of each tile not exceeding 0.36 sqm, in skirting/dado surfaces etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including bedding layer of 10 mm thick in CM (1:4) complete all as specified and directed. |
| 33 | Demolition of brickwork built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc complete all as specified and directed. |
| 34 | Material & Labour for precast cement concrete type C1 1:3:6 (20 mm graded aggregate )block masonry with solid blocks exc 10 cm in width and setting in C:M 1:6 complete all as specified and directed. |
| 35 | Taking down cement plaster from walls of any description complete all as specified and directed. |
| 36 | Rendering 15 mm thick in cement mortar 1:4 on fair face of brick masonry surface or concrete surface finishing the surface even and smooth without using extra cement complete all as specified and directed. |
| 37 | Material & Labour for 10mm thick cement plaster in CM 1:6 on brick work or concrete surfaces rendering is to be even & smooth without using extra cement on internal walls complete all as specified and directed. |
| 38 | Material & Labour for preparation of new plastered surfaces of walls any descripition and applying a coat of primer and two coats of oil bound distemper over 2 mm thick wall care putty complete all as specified and directed. |
| 39 | Preparation of newly plastered surfaces and applying Two coats of cement base paint on walls incl priming plastered and other surfaces with alkali resistant priming paint etc complete all as specified and directed. |
| 40 | Supply and fixing for in repairs 20mm dia. stainless steel curtain rod thickness not less than 1.5mm are made of SS-304 with a perfect glossy mirror finish as approved complete all as specified and directed. |
| 41 | Supply and fixing for in repairs stainless steel fancy types domes cum brackets suitable for 20 mm dia. curtain rod as approved fixed over 1st class hard wood rounded wooden blocks of 65mm dia. and 20mm thick fixed to stone wall/Brick wall using screws including necessary drilling & finished with polishing and fixed to both ends with the curtain rod etc complete all as specified and directed. |
| 42 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 43 | Supply & Fixing for prepainted galvalume alu zinc coating based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/claddding to wall, fix with self tapping screws with necessary washers/welding complete all as specified and directed. |
| 44 | Dismantaling wrought iron or mild steel work of any descripition not otherwise provided complete all as specified and directed. |
| 45 | Supply & Fixing for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade St-240 complete all as specified and directed. |
| 46 | Material & Labour for preparatioin of new steel surface of any description not other wise description over 10cm width applying two coats of synthetic enamal paint over a coat of red oxide zinc chrome all as specified and directed. |
| 47 | Supply & Fixing for powder coated anodised aluminium frame / track or shutters for windows, ventilators etc. with one or more rebates including joining cleat for fixing etc. fixed or sliding type / louvered window or ventilator without sash bar, including necessary joining & fixing, cleats, glazing clips, rubber packing, soundproof window sealing strips, anodised aluminium snap beading, screws and locking arrangement etc complete all as specified and directed. |
| 48 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone concrete glazed with oil putty or fixed with beeds complete all as specified and directed. |
| 49 | Supply & Fixing for sheet glass ordinary quality 4.8mm thick as in doors, showcase alum frame work & similar work with or without glass roller area exc 0.50 Sqm including neoprime gasket complete all as specified and directed. |
| 50 | Supply & Fixing for sheet glass ordinary quality 4mm thick and glazing with oil putty in square n.exc 0.50 Sqm in each pane complete all as specified and directed. |
| 51 | Supply & Fixing for Figured glass pin headed 4mm thick and glazing with oil putty in square n.exc 0.50 Sqm in each pane complete all as specified and directed. |
| 52 | Supply & Fixing for stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed . |
| 53 | Supply & Fixing in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed |
| 54 | Supply & Fixing for door closer hydraulically regulated of aluminium (extruded section), designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 55 | Cutting holes in brick walls in CM for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-0 using 12.5 mm graded aggregate depth of embedded portion of hold fast not exceeding half brick complete all as specified and directed. |
| 56 | Supply & Fixing in repairs vitreous china wash down water closet pan (pedestal pattern), white premium quality (excluding fixing bolts, flushing cistern and flush pipe) all as specified and directed. |
| 57 | Supply & Fixing for Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinges devices complete all as specified and directed. |
| 58 | Supply & Fixing in repairs vitreous China squatting pan 'orrisa' pattern white colour of size 580x440mm with integral foot rests including provision of lime concrete complete all as specified & directed |
| 59 | Supply and Fixing in repairs 10 litre capacity PVC syphonic action type for low level flushing cistern including all fittings and including flushing pipe fixed in repair complete all as specified and as directed. |
| 60 | Supply & Fixing in repairs vitreous china wash basin, white or coloured of size 550 x 400 mm including brackets complete all as specified and as directed . |
| 61 | Taking up or down 20mm steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 62 | Taking up or down 25 or 32mm steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 63 | Supply & Fixing for 20mm dia of CPVC pipes SDR 11 including all CPVC SDR 11 fitting such as elbow/brass elbow, Tee, Socket, reducer/adopter plain/Brass fittings, clamps etc and necessary cutting grooves or chases and making good after laying as on wall / ceiling or in floors complete all as specified and directed. |
| 64 | Supply & Fixing for 25mm dia of CPVC pipes SDR 11 including all CPVC SDR 11 fitting such as elbow/brass elbow, Tee, Socket, reducer/adopter plain/Brass fittings, clamps etc and necessary cutting grooves or chases and making good after laying as on wall / ceiling or in floors complete all as specified and directed. |
| 65 | Supply & Fixing in repair gun metal globe gate valve 20 mm bore complete all as specified and directed. |
| 66 | Supply & Fixing in repair Pillar tap 15mm bore fancy type chromium plated, with capstan head screwed down high pressure with or without lettered “Hot or cold”complete all as specified and directed. |
| 67 | Supply & Fixing in repair Bib taps chromium plated 15 mm with fancy type with capstan head handle screwed both ends for iron pipe or for union complete all as specified and directed. |
| 68 | Supply & Fixing in repairs Stop valve 15mm dia, concealed type chromium plate fancy type with long shank and cupcomplete all as specified and directed. |
| 69 | Supply & Fixing in repairs central hole Basin mixer 15 mm dia Fancy type complete all as specified and directed.Make :- Cera model F-2008461 or equivalent mentioned in List of Manufacturers as approved by GE. |
| 70 | Supply & Fixing in repair Brass CP wall Mixer 2 in 1 for hot and cold water screwed down for iron pipe and fixed for 15 mm dia complete all as specified.Make (FLR- CHR-5273UPR of make \\"JAQUAR\\" or Equvalent mentioned in List of Manufacturers as approved by GE. |
| 71 | Supply & Fixing sink cock in repairs fancy type complete all as specified and (table mounted)with 215 mm swivel spout complete all as specified and as directed. Make - Cera F2003302) or equivalent mentioned in List of Manufacturers as approved by GE. |
| 72 | Supply & Fixing in repair 15 mm dia two way bib taps (fancy type), cast copper alloy with with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete with check nut 15mm bore complete all as specified and directed .Make : Cera Model F2002161or equivalent mentioned in List of Manufacturers as approved by GE. |
| 73 | Supply & Fixing in repairs 15mm dia angle valves, cast copper alloy, CP, screwed down, high pre-ssure, with crutch, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 74 | Supply & Fixing in repairs CP towel rail 600 mm long fixed with chromium plated brass screws and wooden /plastic cleats fixed complete all as specified and directed. |
| 75 | Supply & Fixing in repairs CP Towel ring fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and directed. |
| 76 | Supply & Fixing in repair 600x450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 77 | Supply & Fixing in repair PVC bathroom Cabinet mirror of size 600x450X125mm complete all as specified and directed. |
| 78 | Supply and Fixing in repairs PVC connection 15mm size with PTMT Nut of length 600mm etc complete all as specified and as directed . |
| 79 | Supply & Fixing in repairs for PTMT Waste cupling 40mm dia complete all as specified and directed. |
| 80 | Supply & Fixing in repairs PVC waste pipe 32/40 mm dia for urinal/ WHB/Sink complete all as specified and directed. |
| 81 | Supply & Fixing in repairs Brass chromium plated bottle traps 32 mm for wash basins and urinal with inlet and outlet screwed for pipe or connections including necessary packing, union and cap fixed complete all as specified and directed. |
| 82 | Supply & Fixing in repair Brass chromium plated shower rose 125mm with swivel joints including fixing to steel pipe or union of 15mm bore all as complete all as specified and directed.Make : Cera/Jaguar/Ess Ess. |
| 83 | Supply & Fixing in repairs CP Shower arm 15 mm size, 195 mm long with bend of 45 degree with flange complete all as specified and directed.Make : Cera/Jaguar/Ess Ess. |
| 84 | Supply & Fixing in repairs corner Glass shelf of cera make including neccessary holding arrangements with screws etc all as specified and directed by the Engineer -in -charge.Make : Cera Model F-5005102 or equivalent as approved by GE. |
| 85 | Supply & Fixing in repairs CP grating size 100mm complete all as specified and directed. |
| 86 | Supply & Fixing in repairs CP health fauccet of Cera make including neccessary holding arrangements with screws etc complete all as specified and directed. |
| 87 | Supply & Fixing for PVC floor trap 110mm dia, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed. |
| 88 | Supply & Fixing in repairs PVC(SWR) Pipes 110mm dia single soketed, in any length with rubber ring joints, laid in trenches or in floors/wall complete all as specified and directed. |
| 89 | Supply & Fixing in repairs PVC (SWR) pipes 75 mm single socketed, in any length with rubber ring joints, laid in trenches or in floors/wall complete all as specified and directed. |
| 90 | Supply & Fixing for PVC (SWR) bends 75 mm dia in any radius with access door etc complete all as specified and directed. |
| 91 | Supply & Fixing for PVC (SWR) 75mm dia junction (single 'T') equal or unequal with access door etc complete all as specified and directed. |
| 92 | Supply & Fixing for PVC (SWR) 75mm dia branch piece single (single 'Y') equal or unequal with access door including creating necessary provn in the existing PVC waste inlcuding jointing with rubber washer and solvent clamps etc complete all as specified and directed. |
| 93 | Demolition of cement concrete in ground floors and paving not exceeding 15 cm thickness ( below or above ground level) and disposing the rubbish to a distance exceeding 50 Mtr but not exceeding 100 Mtr away to low lying areas complete all as specified and directed. |
| 94 | Material & Labour for 75 mm thick PCC 1:2:4 type B-1 (20mm graded stone aggregate) as in complete all as specified and directed. |
| 95 | Material and labour for providing hardcore of brocken stone or boulder of gauge not exc. 63mm, deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed |
| 96 | Material & Labour for 75 mm thick plain cement concrete1:3:6 (20 mm graded aggregate) for plinth protection complete all as specified and directed. |
| 97 | Material & Labour for 75 mm thick PCC 1: 3 :6, type C-2 (using 40mm graded stone aggregate) as in sub base of floor complete all as specified and directed. |
| 98 | Material & Labour for 25 mm thick sand filling in bedding layer for laying floor finished complete all as specified and directed. |
| 99 | Material & Labour for Machine pressed precast rubbed moulded interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade jointed with grey cement and pigments complete all as specified and directed. |
| 100 | Supply & Fixing for repairs Kitchen sinks with drainage board made of stainless steel 1 mm thick with plugs, washers and wastes, including bedding in cement mortar to wall with all fixing arrangements of overall size 915x460mm and bowl size 410x330x160mm including sink coupling complete all as specified and directed. |
| 101 | Material & Labour for Granite 18mm thick work in cooking plateform and including 20mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite 18 mm thickness including dismantaling complete all as specified and directed. |
| 102 | Material & Labour for factory made WPC single extruded board of 18 mm thick pre laminated shutter for kitchen cabinet, cupboard and tne prelaminated side with different design and other side plain wihte of density not less than 600kg/cum the 18mm board should be 100% lead free ,water proof, termite proof and moisture/weather proof and good screw holding capacity including all fittings like handle, auto closing hinges, magnetic catcher, and runner channel for kitchen cabinet complete all as specified complete all as specified amd directed. |
| 103 | Material & Labour in repairs for 12mm thick Plywood grade BWP, type BB fixed with Screw or timber frame work complete all as specified and directed. |
| 104 | Supply & Fixing for Stainless steel 304 grade kitchen basket 48 cm x 50 cm x 10cm complete all as specified and directed. |
| 105 | Supply & Fixing for Stainless steel 304 grade kitchen basket 48 cm x 50 cm x 15cm complete all as specified and directed. |
| 106 | Supply & Fixing for Stainless steel 304 grade kitchen basket 48 cm x 50 cm x 20cm complete all as specified and directed. |
| 107 | Supply & Fixing for for pully operated clothes drying system pully it 6 feet(with 4 pipes) consisting of four anodized aluminium pipes each of outer dia. 22mm and inner dia. 19.80 mm and pully made up of derlin with rope guide mounted on channel pair of length 24\\"(distance between two pipes is adjustable) and locking system to hide rope knot, channel to be mounted of fixed with self-tapping screws provided with kit rope will be polyester braided undyed of 3.5+0.50mm dia. complete all as specified and directed. |
| 108 | Supply & Fixing for Wall mounted stand consisting of four anodized, Aluminum pipes, each of outer dia 22mm and inner dia 19.8mm, mounted on anodized aluminium angle of size 30 x 30x3 mm , Model- Mount it 20-4 pipes, 5 ft each complete all as specified and directed. |
| 109 | Supply & Fixing for Stainless steel Plate Rack 0.75 Mtr x 0.90 Mtr complete all as specified and as directed. |
| 110 | Supply & Fixing in repair sinks made of stainless steel1mm thick kitchen or laboratory with plugs, washers and wastes;including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.(make : Nirali/ Blue star or equivalent) |
| 111 | Supply & Fixing in repair Stainless Steel Soap Dish Holder, in repairs, complete all as specified and directed. |
| 112 | Dismantling of old ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillet and frame work complete all as specified and directed. |
| 113 | Supply & Fixing for 605 x 605 mm Anodised aluminium snap grid frame work for false ceiling with all necessary aluminium angle & Tee arrangement with and incl fixing cleats screws including Hangers 6 mm dia. G.I. (upto1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed. |
| 114 | Supply & Fixing for Armstorng boards 9 mm thick in ceiling fixed with screw complete all as specified and directed. |
AI Tender Summary
Tender Timeline
Sep 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 23 daysNov 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 31 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender