Tender For Repair To Plinth Protection , Plastering, Flooring , Doors, Windows And False Ceiling To Certain Building And Certain Allied Works In Technical Area At Afs Yelahanka.
Tender Value
85 Lakhs
Estimated cost
Bid Submission
26 Oct 2026
25 days left
EMD
1.52 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Plinth Protection , Plastering, Flooring , Doors, Windows And False Ceiling To Certain Building And Certain Allied Works In Technical Area At Afs Yelahanka.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and as directed. |
| 2 | Material & Labour for Precast cement concrete block masonry with solid blocks in Type C1, 1:3:6 (20mm graded aggregate) exc .10cm in width and setting in mortar complete set in cement mortar 1:6 complete all as specified and as directed. |
| 3 | Material & Labour for Precast cement concrete block masonry with solid blocks in Type C1, 1:3:6 (20mm graded aggregate) exc .10cm in width (except blocks or slabs) old blocks used retrieved from demolition/ Dismantling and setting in mortar complete set in cement mortar 1:6 complete all as specified and as directed. |
| 4 | Material & Labour for Providing cement concrete Type C1, 1:3:6 (20mm graded aggregate) as in roof kerbs or mud stops or copings rounded or chamfered on edges complete all as specified and as directed. |
| 5 | Material & Labour for rendering 10mm thick cement plaster in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 6 | Taking down cement plaster or cement lime plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 7 | Material & Labour for Roughening surfaces of old concrete floor, ceilings by picking , sweeping clean and washing down with water to remove dust etc complete all as specified and as directed. |
| 8 | Material & Labour for Rendering 15mm thick cement plaster in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth with out using extra cement complete all as specified and as directed. |
| 9 | Material & Labour for Rendering 15mm thick cement plaster in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth with out using extra cement complete all as specified and as directed. |
| 10 | Material & Labour for Brushing neat cement slurry with 3.00 Kg of cement per Sq.metre complete all as specified and as directed. |
| 11 | Material & Labour for Rendering 5mm thick cement plaster in CM 1:3 on fair faces concrete surfaces such as ceilings etc finished even and smooth withiout using extra cement complete all as specified and as directed. |
| 12 | Material & Labour for Applying 3 coats of white wash on ceilings including preparation of newly plastered or unplastered surfaces complete all as specified and as directed. |
| 13 | Material & Labour for Applying 2 coats of distempering on walls with oil emulsion white or tinted over a coat of primer including preparation of newly plastered or unplastered surfaces complete all as specified and as directed. |
| 14 | Material & Labour for Applying 2 coats of cement base paint over a coat of white wash on newly plastered or unplastered wall surfaces including preparation of new surface complete all as specified and as directed. |
| 15 | Material & Labour for Applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide previous on steel and iron surfaces of any description, over 10cm in width or girth , not otherwise described including preparation of new or previously un treated steel surfaces complete all as specified and as directed. |
| 16 | Material & Labour for Applying one coat of Synthetic enamel paint over Brick, Stone, concrete, Asbestos, Cement plaster surfaces of any description over 10 cm girth or width , not otherwise desdcribed including preparation of old painted surfaces complete all as specified and as directed.. |
| 17 | Demolition of cement concrete (un reinforced) in ground floors (including tiles/floor finishes etc) and pavings any thickness (Below or above ground level) complete all as specified and as directed . |
| 18 | Material & Labour for 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in sub base of flooring/hard standing and plinth protection complete all as specified and as directed. |
| 19 | Forming construction Joint 30mm deep x 10mm wide filled with sealing compound Grade \\"B\\" complete all as specified and as directed. |
| 20 | Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 21 | Material & Labour for Screed bed or bedding layer of mortar 15mm thick for laying floor finishes) in CM 1:4 complete all as specified and as directed. |
| 22 | Material & Labour for Vitrified Ceramic Tiles 9-10mm thick 600x1200 or 1200x1800 polished ,glossy polished coloured shade fixed with epoxy joint filling completed set and jointed in neat cement slurry and pointed in in white or coloured cement to match complete all as specified and as directed. |
| 23 | Material & Labour for Vitrified Ceramic Tiles 9-10mm thick 600x1200 or 1200x1800 polished ,glossy polished coloured shade fixed with epoxy joint filling completed set and jointed in neat cement slurry over 10mm thick cement mortar 1:4 as in skirting complete and pointed in in white or coloured cement to match complete all as specified and as directed. |
| 24 | Material & Labour for Non-skid ceramic tiles 7 to 8mm thick, joint free coloured tiles (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. |
| 25 | Material & Labour for polished vitrified tiles as in stairs sized 30x120cm complete all as specified and as directed. |
| 26 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads/EPDM gaskets all as specified and as directed. |
| 27 | Hacking out old broken glass from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed. |
| 28 | Supply & Fixing for plain sheet glass 4mm thick , ordinary quality and glazing with oil putty or using EPDM Gaskets in squares not exceeding 0.50 Sqm in each pane complete all as specified and as directed. |
| 29 | Supply & Fixing Solar control film 25 micron reflective type sticked to glass panes as per manufacturers instructions complete all as specified and as directed. |
| 30 | Supply & Fixing in repair Stainless Steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 31 | Taking down Chowkats or frames exc exceeding 1.5 Sq. M but not exceeding 4.0 Sqm each (Without taking off shutters from the frame) complete all as specified and as directed. |
| 32 | Acoustic Door of 56 mm achieving sound reduction of upto 50 STC. Double layers of 8mm water proof Acoustic Ply with Dampner Sheet and double layer of 10mm compressed insulation and Single layer of Sound Dampner 1218x1218 mm x 12mm made of 10 mm compressed wood Fiber cement composites 1250Kg/m3 and 2mm dampner sheet having 37 STC as per ISO 140 (partIII) - 1995). Door frame will be made of teak wood (Sudan Teak). Three side frame and drop seal below will be provided along with the door with high load bearing hinges complete all as specified and as directed. |
| 33 | Supply & Fixing for frameless glass door is a door panel made from 10mm to 12mm thick toughened / tempered safety glass alongwith stainless steel 304 grade patch fittings / patch lock Floor spring or hydraulic hinges for soft closing Minimal handles – H-type, ladder handle 300mm long 02 Nos each complete all as specified and as directed. |
| 34 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed. |
| 35 | Supply & Fixing for Providing & fixing false ceiling at all heights with GRG (Glass Fibre With Reinforced Gypsum) false ceiling tiles of perforated Size 595 x 595 mm of approved texture, 12mm semi/ fully with perforated 12mm thick micro tegular edged GRG false ceiling design and patterns having moisture micro tegular edged or 1 0 mm content less than 2%, humidity resistance edged GRG thick square edged of 99%, NRC0.50 to 0.75 as per IS false ceiling GRG false ceiling 8225:1987, Noncombustible as per BS tiles 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm,cross-T of size 24x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOOmm length and Lshape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on the periphery wall I partition with the help of plastic rawl plugs at 450mm centre to center and 40mm long dry wall wood screws. The work shall be carried out as perspecifications, drawing and as per direction. |
| 36 | Sound Dampner Tile made of compressed wood particle cement of size 1218x1218 mm x 12mm made of 10 mm cement composites 1250Kg/m3 and 2mm dampner sheet having 37 STC as per ISO 354. Installed on wooden studs with a backing of 50mm 1000 GSM thick absorbwool tested as per Fire Retardant IS 15061-2002 for excellent results. Giving upto 40 STC complete all as specified and as directed. |
| 37 | Supply & Fixing for PVC laminates, acrylic sheets, fluted wall panels, and other ceiling panels advance Laminates introduces a luxurious collection of louver panels created to infuse in walls with modern beauty, practicality, and design. The louvers are crafted with precision and built to last, combining robustness with stunning design, giving any space depth and personality. They add adaptability and a touch of luxury to wall accents, wardrobes, doors, and partitions. and are designed to be strong and environmentally friendly, transforming in plain interior spaces into classic statements of style and functionality complete all as specified and as directed. |
AI Tender Summary
Tender Timeline
Sep 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 25 daysNov 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 33 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender