Tender For Special Repair Of Office Complex Bldg No T-22 Of Med Regt (Old Klp) At Faridkot Mil Stn
Tender Value
48.34 Lakhs
Estimated cost
Bid Submission
20 Oct 2026
16 days left
EMD
96680
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Faridkot → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair Of Office Complex Bldg No T-22 Of Med Regt (Old Klp) At Faridkot Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames not exc 1.5 sqm each with shutters (without taking of shutters from the frames) incl making good disturbed surfaces of wall matching adjoining wall finish and removing taken down material from site complete all as specified and directed. |
| 2 | Taking down chowkats or frames exc 1.5 sqm but not exc 4.00 Sqm each with shutters (without taking of shutters from the frames) incl making good disturbed surfaces of wall matching adjoining wall finish and removing taken down material from site complete all as specified and directed. |
| 3 | S&F Powder coated Aluminium frame for doors, window/partitions/ventilator/sliding window with one or more rebates including joining cleat for fixing etc complete with Aluminium minium thickness of powder coating 50 micron as per the specification the top and bottom horizontal members and vertical members adjacent walls shall be fixed with floor, ceiling walls and cills where required and fixing with the help of rawal plug and screw or with fixing clip or with expansion hold plate fasteners including making arrangements Aluminium section shall be smooth, rust free, straight mitred and jointed mechanically where ever required all complete as per the direction of Engineer-in-charge. |
| 4 | S&F Powder coated Aluminium window/ventilator shutter (glazed and gauzed both),side hung/sliding type without sash bars, aluminum section weighing 0.55 Kg/m including necessary joining cleats, glazing, clips, rubber packing, anodised aluminium snap beading screws,aluminium fitting such as peg stays 150mm long (01 nos) for each shutter, hinges type B-21 100mm long (02 Nos) suitable handle (02 No) and 100 mm tower bolt 02 Nos in each shutter with powder coating of any colour (thickness of powder coating not less than 50micron) etc complete all as specified and directed.Note: Only Glass and wiremesh will be measured and paid seperately. |
| 5 | S&F Anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, 3 Nos hinges in each door, roller for sliding door anodised aluminum snap beading screws etc. with powder coating of any colour (thickness of powder coating not less than 50micron) etc complete all as specified and directed. Note: Only Glass and wiremesh will be measured and paid seperately. |
| 6 | S&F Brass Mortice lock, 4 levers vertical type, size 100 mm complete all as specified and directed |
| 7 | S&F in repair aluminium (Die cast) body door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80kg and fixed complete all as specified and directed by Engineer-in-Charge. |
| 8 | M&L for Sheet glass 5.5 mm thick, ordinary quality/tinted in aluminium frame incl rubber beading and glazing in square n exc 0.5 sq. m in each pane complete all as specified and directed by Engr-in-charge. |
| 9 | M&L for Sheet glass 5.5 mm thick, ordinary quality/tinted in aluminium frame incl rubber beading and glazing in square exc 0.5 sq. m in each pane complete all as specified and directed by Engr-in-charge. |
| 10 | Supply only Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm to be fixed in Aluminium window complete all as specified and directed by Engr-inCharge. |
| 11 | S&F Aluminium anodised barrel tower bolts, 200 mm long of extruded section complete all as specified and directed. |
| 12 | Desmantling boards of any description fixed in any position with nails, complete all as specified |
| 13 | S&F hangers 6mm dia GI (up to 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling long complete all as specified and directed |
| 14 | S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the ntermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. complete all as specified and directed |
| 15 | S&F Laminated 8 mm thick Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paid separately) |
| 16 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), terrazo dado/wall tiling and skirting. etc on brick or stone walls etc including racking out joints hacking for key and scrubbing and removing rubbish off the premises complete all as specified. |
| 17 | M&L for Vitrified double charged tiles 10 mm thick (square/rectangular) (coloured tiles) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in floors set and jointed with adhisive and pointed in epoxy to match the coloured tiles over 15mm thick screed bed or bedding layer CM 1:4 for laying finishes, complete all as specified as directed by Engr-in- ChargeNote :- (i) Adhisive measured and paid separatly. (ii) Cost of epoxy included in items. |
| 18 | M&L for Vitrified double charged tiles 10 mm thick (square/rectangular) (coloured tiles) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in Skirting set and jointed with adhisive and pointed in epoxy to match the coloured tiles over 15mm thick screed bed or bedding layer CM 1:4 for laying finishes, complete all as specified as directed by Engr-in- ChargeNote :- (i) Adhisive measured and paid separatly. (ii) Cost of epoxy included in items. |
| 19 | S&F Non skid ceramic tiles 7 to 8 mm thick (square/rectangular) (coloured tiles) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors set and jointed with adhisive and pointed in epoxy to match the coloured tiles over 15mm thick screed bed or bedding layer CM 1:4 for laying finishes, complete all as specified as directed by Engr-in- ChargeNote :- (i) Adhisive measured and paid separatly. (ii) Cost of epoxy included in items. |
| 20 | S&F Glazed ceramic coloured tiles with highlighter in vertical surface 450x300x7mm or 600x600x7mm thick set and jointed with adhisive and pointed in epoxy to match the coloured tiles over 15mm thick screed bed or bedding layer CM 1:4 for laying finishes, complete all as specified as directed by Engr-in- ChargeNote :- (i) Adhisive measured and paid separatly. (ii) Cost of epoxy included in items. |
| 21 | M&L Granite( green/black) (of any type) work 15 to 17 mm thick (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. all as specified |
| 22 | M&L, Machine cut kota stone slab flooring, cills 20-25mm thick over cement screed base laid and jointed With grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.(single piece of Kota stone to be fixed in stair treads) |
| 23 | M&L, Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. (single piece of Kota stone to be fixed in stair risers) |
| 24 | M&L for polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete. |
| 25 | Dismantling of brickwork built in cement mortar of any description complete all as specified and directed as per Engineer-In-Charge |
| 26 | M&L brick work with fly ash brick sub class B bricks straight or curved on plan exceeding 6 mtr mean radius in cm 1:6 etc.complete all as specified and directed by Engineer - in - Charge. |
| 27 | Taking down cement plaster from brick walls/ ceiling or concrete of any description,racking out joints hacking for key scrubbing down with water etc complete all as specified |
| 28 | M&L for Rendering 10mm to 15 mm thick in ready mix plaster on any faces of brick wall or concrete surfaces finished even and smooth complete including preparation of newly plasterd surfaces of wall etc, complete all as specified and directed by Engr-in-Charge. |
| 29 | M&L for prepration of new plastered Internal wall surface and applying followings complete all as specified and directed :-(a) Applying one coat wall care putty on wall surface and smoothening the surface prepatory to paint.(b) Two coat of Distempering with 1st quality acrylic distemper (ready mixed) and including one coat of primer by using Airless spray / Roller over complete. |
| 30 | M&L for prepration of new external plastered wall surface and applying two coat of weather proof acrylic exterior over one coat of exterior primer using hand roller complete all as specified |
| 31 | M&L for complete removal of existing treatment of old decorated surfaces of wall by mechanical sander/ brooming down and scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and filling in depressions to make smooth surface and applying Two coat of Acrylic Smooth exterior paint of required shade over and including one coat of of exterior primer and over 2mm thick of exterior wall care putty complete all as specified |
| 32 | M&L Preparation of old ceiling surfaces plastered or unplastered and applying two coat of OBD over a coat of primer over a coat of 1mm thick putty complete all as specified and directed by Engr -in - charge. |
| 33 | M&L for complete removal of existing treatment of old decorated surfaces of wall by mechanical sander/ brooming down and scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and filling in depressions to make smooth surface and applying two coat of distemper oil emulsion white/tinted using hand roller complete over a coat of 1 to 1.5 mm wall care putty all as specified |
| 34 | S&F in repair Rotational moulded polythylene 1000 capacity water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position including 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. & dismantling of old water tank complete all as specified |
| 35 | Taking up or down GI tubing 20mm bore pipe including. |
| 36 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings and all other Brass fittings required except given in item number 37, 38, 39 & 40 on walls/ceiling or laying in floors complete including cutting chases in wall, floors etc and their making good in case of concealed pipe work all as specified. bore of pipe 20mm complete all as specified and directed by Engr-in-Charge. |
| 37 | S&F of 20 mm inner dia CPVC Brass Male/Female Brass Threaded Adaptor fittings complete all as specified |
| 38 | S&F of 20 mm inner dia CPVC Brass Elbow fittings complete all as specified |
| 39 | S&F of 20 mm inner dia CPVC Brass T fittings complete all as specified |
| 40 | S&F of 20 mm inner dia CPVC Brass Union fittings complete all as specified |
| 41 | S&F in repair 15 mm dia bore fancy type chromium plated long body bib taps cast copper alloy with on/off handle, screwed down, screwed for iron pipe, or for brass ferrule complete all as specified and as directed. |
| 42 | S & F in repair 15 mm bore chromium plated Angular stop valve of cast copper alloy screwed down high pressure with on/off handle screwed both ends for iron pipe or for unions and fixed all as specified and directed |
| 43 | S & F PVC connection 15 mm size with PTMT nuts of length 600 mm of approved quality complete all as specified |
| 44 | S&F in repair vitreous china counter wash basins, size 470x470mm white flat back to be fixed over and incl on granitr/marble & RCC slab including cutting for and pinning in ends of brackets or erecting stand, including 32mm waste fittings, waste pipe, chromium plated with long screwed shanks & fly-nuts, flange end bedded in red lead cement and other end fixed. CERA SKU S2030115 OR SIMILAR AS APPROVED. |
| 45 | S&F in repair vitreous china wash hand basin , white, flat back of size 550mm x 400mm including cantiliver CI/angle iron brackets, CP brass waste coupling 32mm bore with rubber washer and PVC waste pipe 32mm bore complete all as specified and directed . |
| 46 | S&F in repair Pillar taps, fanct type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed |
| 47 | S&F Brass CP Basin mixer 15mm bore for mixing hot & cold water screwed down for iron pipe for Wash Hand Basin complete all as specified and directed. |
| 48 | S&F Brass CP Wall mixer teleponic 15mm bore for mixing hot & cold water screwed down for iron pipe complete all as specified and directed. |
| 49 | S&F in repair brass chromium plated shower rose 125 mm of size with arm and with or without swivel joints to steel pipe or union complete all as specified and as directed |
| 50 | S & F in repair 15 mm bore chromium plated stop valve of cast copper alloy with long shank and cup (concealed type) ends for iron pipe or for unions and fixed all as specified and directed |
| 51 | S & F in repairs vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe incl concrete bedding and connection to antisyphonage pipe etc including making good to floor. |
| 52 | S & F in repairs vitreous China one peice wall hung EWC with soft close seat cover, hinges, incl Jet spray accessories set size 640x360x765 mm white colour complete including concealed body flushing cistern with hanging arrangement complete all as specified and directed by Engr-in-charge. Make CERA cat part no S1013206 / S1013105 / S1013203. |
| 53 | M&L for 100 mm dia of long body PVC 'P' or 'S' trap incluing jointing to waste pipe fixed in cement concrete 1:2:4 type B1 in repair complete all as specified. |
| 54 | S & F in repairs vitreous China EWC wash down water closet (Pedestal pattern) incl seat cover and Jet Spray connection to trap and to flushing pipe etc complete. |
| 55 | S&F in repair vitreous china urinal size 375x390x590mm cat No S4020112 of cera or equivalent,white, incl waste coupling and waste pipe of PTMT inclproviding and fitting plugbeddingurinal against wall in cement mortar 1:2 securing urinal to plugs withand incl 60mmlong brass screws, pointing aroundurinal back in cement mortar, incl connection to flushingpipe and outgoing pipes complete all as specified and directed |
| 56 | S & F PVC low level cistern of 10 ltrs capacity with top push buttion inclusive of brackets and PVC bend long type and connectin to flush pipe of any size and pattern with inlet ball valve float and handle complete of approved make. |
| 57 | S&F 600mm x 450mm bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified. |
| 58 | S&F in repair brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges. |
| 59 | S&F in repair Towel Ring of stainless steel fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and directed |
| 60 | S&F Chromium Plated soap tray any type and fixed to plugs on wall with chromium plated brass screws complete all as specified and directed. |
| 61 | Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 62 | S&F sinks Without Drainage Board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm. |
| 63 | PCC (1:3:6) type C-2 (using 40mm graded agg) 75mm thick as in plinth protection including making grooves. |
| 64 | Demolition of RCC of any descrition such chajja, shelves etc and in any position not other wise specially provided for complete all as specified and directed by Engineer in Charge (reinforcement cut as required to facilitate demolition) |
| 65 | M&L for reinforced cement concrete type B1 1:2:4 (20 mm graged aggregate) as in Slab supported on walls, beams and column in floors, roofs, landings, balconies, deck slabs and in shelves and etc. and setting in mortar complete with joints to match complete all as specified |
| 66 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer, calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. |
| 67 | S&F factory made single extruded WPC (Wood polymer composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (suspention grade),calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm² and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutters and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per direction of Engineer-in-charge. (Note : stainless steel butt hinges shall be paid seperately) |
| 68 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer, calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. |
| 69 | S&F factory made single extruded WPC (Wood polymer composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (suspention grade),calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm² and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutters and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per direction of Engineer-in-charge. (Note : stainless steel butt hinges shall be paid seperately) Please Enable Macros to View BoQ information |
| 70 | S&F factory made single extruded WPC (Wood polymer composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (suspention grade),calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm² and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutters and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per direction of Engineer-in-charge. (Note : stainless steel butt hinges shall be paid seperately) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysOct 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender