Tender For Construction Of Public Distribution Shop At Ward No 5 Near Muthalamman Kovil Temple Kondamanayakanpatti In Aundipatti Town Panchayat
Tender Value
15 Lakhs
Estimated cost
Bid Submission
15 Oct 2026
12 days left
EMD
15000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Theni → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Public Distribution Shop At Ward No 5 Near Muthalamman Kovil Temple Kondamanayakanpatti In Aundipatti Town Panchayat
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork excavation and depositing on bank with an initial lift of 2M in light black cotton soil. Hard stiff day. Stiff black cotton. Hard red earth, shales, muram, gravel stoney earth etc. as per SS 20B ( TNBP SS No.23 & 24) |
| 2 | Cement Concrete 1:5:10 (One Cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard specification and as directed by the departmental officers -Mixing by mechanical means |
| 3 | Supply and filling in basement with Well Gravel well rammed watered and consolidated complying with standard specification. |
| 4 | Supplying and erecting for sides and soffits including supports and strutting up to 3.29m height for plan surface in all floors with all cross bracing using mild steel sheets of size 90cm and 10 gauge stiffened. Welded with mild steel angels of size 25mm x25mm x3mm for boarding laid over silver oak (country wood) joist of size 10cm centre and supported by casuarinas props of 10cm to 13 cm Dias paced at 74cm center to center etc. complete complying with standard Specification and as directed for the following items. Square column |
| 5 | Grade Beam |
| 6 | Plain surface |
| 7 | Supplying and Fabrication and placing in position mild steel or ribbed or steel for all reinforced cement concrete works as per the design given including cost of Steel and binding wire in all floors etc. complete complying with standard Specification (Ms RTS bars will be supplied departmentally at section stores and cost will be recovered at issue rate) the binding wire shall be supplied by the contractor. |
| 8 | Providing and laying in position, standardised concrete Mix M-20 Grade by insitu machine mix concrete adopting weighing batch method in accordance with IS 456 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 Cu.m) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 Cu.m) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials) |
| 9 | Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9\\" X 43/8\\"X 2 3/4\\" including finishing, curing, etc., complete complying with standard specification - 100CFT |
| 10 | Finishing the top roof with one course machine pressed tiles of size 20cm x 20cm x 2cm x of approved quality laid in cement mortar 1:3 ( one cement and three sand) 12mm thick mixed with water proofing compound confirming to ISS by 2% weight of cement used and the joint pointed neatly to full depth of tiles with the same water proofing compound mixed with cement mortar. Red oxide etc. complete complying with standard Specification. |
| 11 | Supply & Fixing of steel door window & other items including cost of material and other labour charges but excluding conveyance from go down and fixing charges as per standard specification. |
| 12 | Supplying and Erecting Pull and Push Type Rolling Shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc |
| 13 | celling plastering in cm 1:3 10mm thick including cost and conveyance of all materials to site and all other labour charges including curing etc. as per standard specification. |
| 14 | Plastering with Cement Mortar 1;5 mix to 12mm thick in all floors including curing etc. complete complying with standard Specification and as directed. |
| 15 | Providing Granothatic floor finish of the 25mm thick including cost and conveyance of all materials to site and all labour charges and all other incidental charges etc., complete as per standard specification. |
| 16 | Emulsion Painting two coats with approved colour including cost and conveyance of all materials to site and all labour charges etc, complete |
| 17 | Painting in two coats of new iron work over Priming coat including cost and conveyance of all materials and all labour charges etc. ( Complete (for structural steel work) |
| 18 | Dadooing the walls with glazed tiles of 30 c.m x 20 c.m 6mm size laid in cement mortor 1:2 mix 10mm thick and pointing with 0.40 kg white cement per m2 etc. |
| 19 | Supplying and fixing over the floors best quality of scratch ceramic tiles of 30 c.m x 30c.m x 6mm size of approved colour laying with cement mortor 1:3 mix pointing the joints with colour pigments etc. Complete. |
| 20 | Supplying and fixing in Position of Indian Oriya pan type water closet with “P’’ or “S’’ trap to set in brick jelly concrete 1:4:8 Mix concrete 10 cm thick using 20mm brick jelly and top finished with c.m. 1:3 mix 20mm thick without any leakage etc. complete |
| 21 | Supplying and fixing in position best Indian make white glazed earthenware WASH HAND BASIN of 560x406mm with a a pair of C.I. Brackets, 15mm dia C.P. Pillar tap, 32mm G.I. Waster water pipe, 32mm dia C.P. Brass waster coupling, plug with chain, 15mm dia PVC connection, 15mm G.M. wheel valve with ISI mark and necessary G.I. union and G.I. Elbow, including fixing wash hand basin in position with white lead, clamps, teakwood plugs, screws, rubber washer etc., complete without any leakage complying with standard specifications. |
| 22 | Wiringwith2x1.5sq.mm. PVCinsulatedSCunsheathedFRLScopperconductorof1100Vgrade insuitablePVCrigid pipeconcealed inwall andceilingwithPVCaccessoires influshwithwallwith3mmthickhylumsheet coverwithTW switchboxand5AFTswitchandmakinggoodoftheconcealedportionwithsuitablecolourforPVCconcealedlight/fan Point (for electronic regulator) (5 points per coil) |
| 23 | Wiringwith2x1.5 sq.mm. PVC insulated single coreunsheathedFRLScopper conductor cableof 1100Vgrade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories in flush with wall with 150mmx100mm x75mm MS switch box with 3mm thick hylum sheetcover for 5A 3pin non interlocking CS plug with continuous earth wireconnection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for concealed plug point |
| 24 | Supply and run of 2 of 4 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade on7/20 GI bearer wire for service connection mains |
| 25 | Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in25mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports formains |
| 26 | Supply and fixing of 1200mm sweep AC ceiling fan complete with stepped electronic 300W regulator with the existing down rod on the existing clamps |
| 27 | SupplyandfixingofTNEBmeterboardsuitablefor32Asinglephaseserviceconnectionwith32Afuseunit (500V)32Aneutral linkandearth link(1\\"x1/8\\"copper flat on TW plank of size 375 mm x 300mm x19mm with supporting TW reepers of 1\\" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earthconnection and interconnection with 7/20 PVC insulated copper wire from EB meter to fuse unit with 1No40Amp30MA Double Pole RCD / RCCB (Higher End) with suitable necessary connection |
| 28 | Supply and Fixing of 4’ 18W Crystal Glass LED Tube Light Fitting including all chareges Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysOct 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender