Tender for Tender for Repair and Maintenance of Rest House At 132 Kv Gss Sangod (Kota)
Tender Value
19.85 Lakhs
Estimated cost
Bid Submission
07 Oct 2026
7 days left
EMD
39700
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kota → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair and Maintenance of Rest House At 132 Kv Gss Sangod (Kota)
BOQ
| Sl. No. | Item Description |
| 1 | Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sum on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed with a lead in a 50 meter all kind of soil (B-1.8) |
| 2 | Surface dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead up to 50 Mtr. and lift up to 1.5 Mtr.: All kinds of soil(B-1.28) |
| 3 | Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead With cement mortar 1 :4 ( 1 cement : 4 coarse sand) B-13.1 |
| 4 | Dismantling tile work in floors and roofs laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meter lead:For thickness of tiles 10mm to 25mm.B-14.23.1 |
| 5 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. (A) 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size)(B-3.2.2) |
| 6 | (B-3/3.1.6) Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M20 grade Nominal Mix All up to plinth level1:4:8 (1Cement :4 Course Sand :8 Graded stone aggregate 40 mm nominal size |
| 7 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. (A) 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)(B-3.2.1) |
| 8 | Providing and fixing 1st quality MAT & GLOSSY finished ceramic tile confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4).)Size 300mm x 450mm thickness 7mm to 8mm (B-7/7.21.2 |
| 9 | Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm comfirming to IS : 13755 and IS 15622 colour suchas white, grey, ivory, fume red brown , light green light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4 ) (B-7/7.13) |
| 10 | P & F 1st quality Vitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete. size 600 mm X 600 mm (B-7.18.2) |
| 11 | Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in:Cement Mortar 1:6 ( 1-Cement : 6-Sand).(B-6.1.6) |
| 12 | Repair to stone masonary in cement sand mortar 1:6 with old and new stone. B-13.12 |
| 13 | Half brick masonry in Superstructure , above plinth level upto floor V level using bricks of designation 75 : Cement mortar 1 : 6 (1 cement :6 coarse sand).(B-5/5.8.3) |
| 14 | Plaster on new surface on walls in cement sand mortar 1 : 6 including racking of joint etc. complete fine finished : 20 mm thick(B-12/12.3.2) |
| 15 | Renewing glass panes, with putty and nails wherever Float glass panes of thickness 4 mm B-13.4.1 |
| 16 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade \\"including all scaffolding: Old work (one or more coats) including scrapping surface and necessary repairs.\\" Colour Change (B-12/ 12.37.2(a)) |
| 17 | New work (one or more coats) including scrapping and priming coat with cement primer\\" (B-12/ 12.37.1) |
| 18 | Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete New Plastered Surface (three or more coats) B-12.22.1 |
| 19 | __do__Old Plastered Surface (two or more coats) (B-12.22.2) |
| 20 | Painting exterior surface of Wall with 100% acrylic exteriorpaint of approved brand and manufacture to give an evenshade with two or more coats including prepartion of base with sand papering, primer, putty, etc complete in all respect including scaffolding and safety provision . Old Work (B-12.43.2) |
| 21 | ___do____New Work (B-12.43.1) |
| 22 | Painting with enamel paint of approved brand and manufacture to give an even shade : One or more coats on old work. (B-12/12.46.2) |
| 23 | Two or more coats on new work (B-12/12.46.1) |
| 24 | Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proffing cement compound @ 0.253 kg/sqm.b) laying second layer of Fiber glass cloth when the first layer is still green . Overlaps of joints of fiber cloth should not be less than 10 cm .c) Third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proffing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all aroundd) fourth and final layer of brick tiling ‘with cement mortar or any other approved protective coarse. (which will be paid for separately) For the purpose of measurement the entire treated surface will be measured (B-15.4) |
| 25 | Chequerred precast cement concrete tiles 22mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc.complete on 20mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand)Light shade using shade cement.(B-11.17.1) |
| 26 | Providing and fixing stone slabs table rubbed, 15-18 mm thick in Walls, Steps, Pillars, Counters, Jambs, Shelves, Sills etc. laid on 12mm (Av.) thick base of CM 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. .Keseriaji/ Abu Ambaji (Green Marble)Above 3601 Cm2 Slabs (B-7.3.3) |
| 27 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :(B-10.22) |
| 28 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge.1: 4: 8 or LEANER mix. (B-14.2.2) |
| 29 | Providing and fixing external grade board, solid core single leaf flush door shutters IS: 2202-67 marked using phenol formal dehydreresin glue both sides with approved steel fitting complete as per annexure 'A' 30mm thick commercial veneer both side(B-8.13.2.1) |
| 30 | Providing and fixing fully panelled/partly panelled/ double leaf shutter frames for doors as per approved design and drawings with approved ordinary C.P./ oxidised steel fittings as per Annexure - 'A' and width of styles & top rails of 100mm and lock rails width of 150mm and bottom rails of 200mm width including teak wood beading of size 19mm x 12mm on both faces complete :: 30 mm thick Sheesham wood grade-I (B-8.4.2.3) |
| 31 | Extra for providing external lipping with 2nd class teak wood battens 6 mm minimum depth on all edges of shutters (over all area of door shutter to be measured) Over item no. 8.13. (B-8.14) |
| 32 | Providing and fixing Nigeria / Ghana teak wood grade-I moulding and beadings in doors and windows size 50x12mm (B-8.23.1) |
| 33 | Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section (IS 1038- 1983) joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required : Partly fixed and partly openable [ fixed area not to exceed 33%] B-9.19.4 |
| 34 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape whenever required. 0.63 mm thick with zinc coating not less than 275 gm/m2 (B-10.1.3) |
| 35 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting (height upto 10 m) , fixing in position and applying a priming coat of approved steel primer all complete: (B-9.2) |
| 36 | Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide(B-9.8) |
| 37 | Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance.(B-9.26) |
| 38 | LABOUR charges for repair to door/window without using any MATERIAL such as applying randha(finishing) tightening of bolts & screw etc.(b-13.24) |
| 39 | P & F WVC wash basin ( 1st quality,I.S. : 2556 Mark ) of approved make with C.I. Brackets duly painted, 1 No. 15 mm C.P. Pillar cock (I.S. :8934 Mark) & 32mm C.P. brass waste coupling of approved make, 25 mm G.I. Waste pipe complete including cutting & making good the wall : Size 510 mm x 400 mm S7/1.36.2 |
| 40 | ____do___Size 550 mm x 400 mm dia for counter top S-1.36.8 |
| 41 | P & F 1st quality WVC pedestal for wash basin.S-1.40 |
| 42 | P & F ball cock (IS:1703 Mark) with rod & PVC ball complete Brass wt. Not less than 300 gm,15mm. S19 /2.11.1 |
| 43 | P & F full way valve (IS:778 Mark) or wheel valve of approved make : Gun metal 15 mm nominal bore S21 /2.15.1 |
| 44 | P & F full way valve (IS:778 Mark) or wheel valve of approved make : Gun metal 25 mm nominal bore S21 /2.15.3 |
| 45 | P & F rigid PVC pipe (IS: 4985 mark ) class II/( 4 Kg./Sq. cm.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. 110 mm dia (S -3.16.3) |
| 46 | P & F rigid PVC pipe fittings (IS : 4985 mark) of approved quality /marke including joining the pipe with solvent cement rubber ring and lubricant : (a) Coupler (Socket) 110 mm dia.(S-3/3.17.1(ii)) |
| 47 | (b) 110mm dia Bend 87 .5 (S-3/3.17.9) |
| 48 | Providing and fixing waste Pipe with all fittings.PVC with C.P nut 32mm dia(S-1.43.1) |
| 49 | P & F 15 mm. Dia Connection Pipe of approved quality/make :PVC pipe with C.P. Brass nuts upto length, 300mm(S-2.13.1) |
| 50 | P & F bib cock ( IS:8931 Mark), superior quality of approved make:C.P. Brass bib cock 15 mm nominal bore(S-2.7.3) |
| 51 | __Do___ long body 15 mm nominal bore weight not less than 690 Gm(S-2.7.4) |
| 52 | Providing and fixing Superior quality CP Brass fittings of approved make as per direction of Engineer-in-charge (a) Single lever wash basin mixer with 450 mm long copper connection pipe S-2.33.11 |
| 53 | ___do__(b) Jet Spray (Premium heavy Quality) as approved by Engineer-in-Charge S-2.33.24 |
| 54 | _____do_____(c) Health faucet(Superior quality) |
| 55 | ____do____(D) wall mixer with 450 mm long copper connection pipe |
| 56 | P & F Divertors of superior quality and approved make: C.P. brass Tip-tone divertor bath spout with mixing valve. S-2.22.1 |
| 57 | P & F PVC storage tank ( IS :12701 marked indicating the BIS license No.) of approved make with cover, 25mm dia 1mtr. Long G.I. Over flow pipe & 25cm.long wash out pipe with plug & socket, including making connection etc. complete of approved design: 500 liters capacity : (S21/2.26.3) |
| 58 | Hoisting Charges for each floor For items 2.26.1 to 2.26.4 (S-2.27.1) |
| 59 | P & F Bevelled edge Mirror/mirror with teak wood lipping around of special glass of approved make as per direction of Engineer-in-charge complete with 6mm thick commercial ply base fixed to wooden screws & washers. Sixe 600x450x4 mm S-1.44 |
| 60 | P & F Towel Ring of approved quality/make: C.P. brass (a) C.P. Brass Towel Ring revolving type (S-1.47.8) |
| 61 | ___(b)___C.P. brass Towel Rail elbow type with concealed screws size 600 mm (Heavy duty). S-1.47.2 |
| 62 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement , trenching refilling & testing of joints complete as per direction of Engineer in Charge. (External work). 20 mm nominal outer dia pipes (S-2.39.2) |
| 63 | 25mm nominal outer dia pipes (S-2.39.3) |
| 64 | P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. C.P. Inlet connection 15mm.Brass (IS : 8931 marked)(S-2.12.1) |
| 65 | P & F Grating of approved quality/make:Stainless Steel Sheet size 125mm dia.(S-1.48.1) |
| 66 | P & F Ist quality WVC urinal (IS:2556 mark) with 25mm dia G.I. Waste pipe , dome coupling, concealed iron bracket or screws etc. complete Flat back (small) size 456x355x265 (S-1.14.1) |
| 67 | P & F European type white glazed vitreous china 1st quality W.C pan (IS : 2556 Mark) with P or S trap including cutting and making good the wall and floor |
| 68 | P & F White Vitreous China Double Syphonic European W.C. (I.S:2556Mark) with mounted W.V.C. flushing cistern of (IS : 2556 Mark) of 10 litre capacity complete with all necessary internal fittings including cutting and making good the wall and floor. |
| 69 | P & F water closet seat covers with brass hinges complete solid PVC (ISI marked ) grade-I _do__white (S-1.7.2) |
| 70 | P & F Liquid Soap Container with brackets complete of approved make:CP Brass S-1.49.1 |
| 71 | P & F Tooth Paste & Brush Holder of approved quality/make:Stainless SteelS-1.50.3 |
| 72 | P & F Soap Dish or Tray of approved quality/make CP Brass heavy and sup quality S-1.52.2 |
| 73 | P & F Toilet Paper Holder with rod of approved quality/make: CP brass heavy & sup quality. S-1.51.2 |
| 74 | Providing & Fixing Premium quality Bottle trap internal portion 32mm, size 250mm long wall connection pipe & wall flange as per approved by Engineer in Charge.S-1.81 |
| 75 | P & F Shower arm 15mm dia of approved quality/make. C.P.brass heavy & superior quality size 370mm S-1.54.4 |
| 76 | P & F Bath Shower of approved quality/make.C.P. brass of Heavy & superior quality, revolving with adjustable key 150mm.S-1.55.3 |
| 77 | P & F Low level Flushing Cistern of 10 litres capacity (IS : 2556mark). Of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS: 1703 mark) complete including cutting and making good the wall:PVC with PVC bend as per IS : 7231(S-1.20.2) |
| 78 | Rewiring of 3/5 pin 6 amp. Light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) virgin material PVC conduit & it's ISI marked (IS:3419-1988) accessories, 1.2 mm thick MS box with earth terminal of required size, 6 A switch, 3/5 pin 6 A socket, 3.0 mm thick ISI marked (IS:2036-1995) phenolic laminated sheet, Al.alloy / Cadmium plated iron/ brass screws, cup washers, making connections, testing etc. as required. For specification of copper Conductor, Phenolic Laminated sheet's & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure 'A' attached with this BSR On Board 1.7.1 |
| 79 | 1.7.2 Short point (up to 3 mtr.) |
| 80 | 1.7.3 Medium point (up to 6 mtr. |
| 81 | 1.7.4 Long point (up to 10 mtr..) |
| 82 | E-7/7.37 Providing and fixing of power plug point with non modular accessories as per PWD specification for electrical Works with Galvanized box of 1.2 mm thick with earth terminal with suitable size phenolic laminated sheet (IS : 2036 - 1995) cover including cost of 16 amp. Switch (IS :3854) and 3/6 pin 16 amp. socket outlet making connection , testing , etc. as required. . For specification of Wiring accessories refer Chapter E - 07 related item & For additional technical parameters of product / work refer Annexure 'A' attached with this BSR |
| 83 | S&F following sizes of ISI marked ( IS:14927 P - II ) virgin material UPVC trunking along with accessories like coupler, inner, outer, elbow, square box, tee, end cap etc. on surface with screws, expansion fasteners as required. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR. 25 mm x 12 mm E 3.4.2 |
| 84 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, in existing surface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, Ferrules,testing etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR 2x2.5 sqmm + 1x1.5 sqmm E 4.1.7 |
| 85 | ___DO__ 2 x 4.0 sqmm+ 1x2.50 sqmm E 4.1.14 |
| 86 | Providing & Fixing of of Double ball bearing, copper wounded capacitor start single phase metallic blade fresh air fan, in existing opening including cost of hardware , flexible 3 core copper conductor ,making connections, testing etc. as required. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR .300 mm sweep (E-15.12.2) |
| 87 | Providing & Fixing of BEE Star rated copper wounded double ball bearing capacitor start, aluminium body & Metallic blade ceiling fan Conforming to all the performance requirements laid down in IS 374:2019 including all amendments, as applicable ; & Carry BIS licensing (i.e. ISI marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR . . 1200 mm Sweep BEE 1 Star rated (service value >=4.5 to < 5 )with min air delivery 230 cmm E 15.7.6 |
| 88 | Providing & Fixing of IS 11037:1984 marked non modular socket size flush type 120 watt rotary minimum 5 step fan regulator with CM/L no. printed and made out from industrial grade Polycarbonate or fire resistant ABS material including making connection testing etc. as required.All as per pre approved by Engineer in charge. For additional technical parameters ofproducts/ work , refer Annexure \\"A\\" attached with this BSR .7.20 |
| 89 | Providing & Fixing of ISI marked (IS:302) ding dong/musical chime bell including making connection testing etc. as required. E-7.25 |
| 90 | Providing & Fixing of 240/415 V AC MCB with positive isolation of 10 kA breaking capacity (B/ C/D tripping characteristic as per type of load and site requirement) 4 KV impulse withstand voltage, ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947- 2, low watt losses, trip free mechanisum , energy limiting of class 3 as per IEC, minimum phase termination capacity of 35sq.mm. , conductor line load reversibility , IP 20 contact protection and fitted in existing distribution board/sheets, minimum electrical operation 20,000 upto 20 A rating and 10,000 upto 63 A, 5000 for 80 A & above rating including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR Single pole MCB (With B/C curve tripping Characteristics) 6 A to 32 A rating E6.1.1.2 |
| 91 | Providing & Fixing of energy efficient direct fit (Retrofit) Polycarbonate/ Glass housing SMD Mid Power LED tube rod (with integral driver & alumn. heat sink ), on existing fixture. system lumen efficacy ≥ 100 lm/Watt output, internal surge protection of 2.5 KV ,THD < 20% ,p.f.≥0.95,CRI >80 , life time of minimum 35000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80)certificate / Report from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR . 1200mm, Min. Lumens output 2000 lm LED Tube rod with Poly carbonate housing E-17.1.2 |
| 92 | Providing & Fixing of IK08 IP65 protected Top/Bottom mounted LED Post top Luminarie made of single piece construction powder coated die cast alluminium housing with UV stabalized Clear / frosted Polycarbonate diffuser and Aluminium anodised with sand blast reflector. The System level Luminous efficacy ≥ 100 Lumen/W. SMD LEDs is to be used, System CRI>70, CCT: 3000/4000/6500 K. The integral electronic driver must be potted & has a unique BIS R number must be potted & has a unique BIS R number constant current and Internal/external surge protection device of min. 4KV(L-N) and efficiency > 85%, PF>0.9, THD<10% and input Voltage range of 140-270V AC at 50Hz. System life of 50000 Burning hours with 70% of Initial Lumens maintained . Driver current <750mA. Fixture must be in compliance with BIS Standards and Trade mark Certificate complete in all respect.OEM Must have its own in houseNABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR . Minimum lumen output 3000 lm Post top Luminarie E-18.10.2 |
| 93 | Providing & Fixing of Vertical(BEE 5 star rated) / Horizontal( BEE 3 star rated) storage water heater with outer casing made of Engineering Plastic sheet (Upto 25 Ltr) / Metal rust proof Body (35 & 50 Ltr), Glass - line / Titanium Enamel coated Pressure Pump Compatible 8 bar pressure Inner tank, Glass Line Coated , mineral filled heating element, stem type, snap action adjustable thermostat , Dual indicating lamps Injected PUF insulation, Multi Function Valve etc. as required held in position with 2/4 no. 10/12 mm anchor Fastener, duly wired with 3 core 2.5/4.0 Sqmm PVC insulated & sheathed copper conductor and 16 A/25A three pin plug top with Portable Residual Current Device ( PRCD ) , including making inlet, outlet Flexible alloy connection, testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR .a) 10 ltr E-16.1.2 |
| 94 | Providing & Fixing of IK08, IP 66 protected LED Street Light Luminaire on existing bracket/pole. Fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with UV stabilized PC (UV stablization report submitted for UV cover ) /Toughened Glass cover and secondary lens on each LED & should be SMD type of 3 to 5 watt each . The System efficacy >=125 lm/ wt and potted driver & has a unique BIS R number with Input Voltage AC 120 to 270 V AC with High voltage Cutoff @>=300 V AC and Auto resetting Safety , Power Factor >0.95 driver Efficiency >85% ,THD(I) <10% Humidity 10% to 90% RH Working Temp -5C to 45C . driver current <750mA. The luminaire shall be BIS certified and Trade mark certified. Life Expectancy Equal or more than 50000 burning hrs with Minimum 70% lumen maintened , CRI >70 and CCT 5700K +355K. Surge protection shall be min ≥ 4 KV internal and min 10 KV external inside driver compartment. driver should be Phase to phase protection of 440 V for 4 Hrs. Manufactures Word Mark/Name Engraved/Embossing on die cast housing to allow traceability/authenticity. Fixture shall be AS PER IS 10322 Complianced.OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR . LED Street Light fixture with Minimum lumen output 8700 lm E-18.12.5 |
| 95 | Providing & Fixing of Street light bracket made out from following size of ' B ' class , Medium class G.I. Pipe confirming to IS : 1239 P - 1 ( 2004 ) with heavy duty pole clamp, Saddles suitable fastners etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR . 25 mm dia E18.19.2 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysOct 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender