Tender For Short Term Maintenance Contract Of Nh-168A From Km. 0/00 To Km. 11/800 (Length-11.80 Km) In State Of Rajasthan.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
18 Nov 2026
22 days left
EMD
4.14 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalore → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Short Term Maintenance Contract Of Nh-168A From Km. 0/00 To Km. 11/800 (Length-11.80 Km) In State Of Rajasthan.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 14-Oct-2026 | Corrigendum No. 1 | Date | 18-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Stripping excess soil from the shoulder surface including disposal of excess earth side slopes to achieve the approved level and compacting with plate compactor up to 75mm average depth complete as per MoRTH specification clause 3003. |
| 2 | Restoration of rain cuts with soil, Morrum, gravel or a mixtureof these includingall leads and lifts and cost of arrangement of land, clearing the loosesoil, benching for 300mmwidth, laying fresh material in layers not exceeding 250mm and compacting with plate compactor or power rammer to restore theoriginal alignment levels & slopes complete as per MoRTH specification Clause 3002. |
| 3 | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material up to a lead of 1000m including removal and disposal of top organic soil not exceeding in 150 mm thickness as per MoRTH specification clause 201 By mechanical Means. In area of light jungle. (Twice in a year) |
| 4 | Clearing slab/box type culvert and pipe culvert including clearing, cleaning and reshaping of upstream and downstream phases of these culvert with in right of way. The job includes disposal of excess material recovered from site including vegetation outside ROW with all leads and lifts complete in all respects as per direction in charge (frequency of cleaning will be one time in a year i.e. before start of mansoon).Slab/pipe culvert |
| 5 | Repair of pot holes by Wet Mix Macadam material by removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, compacting base of excavation as per clause 503, back filling the pot holes with wet mix macadam material by manual means as per clause 406, compacting with roller 8-10T, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004. |
| 6 | Filling pot-holes and patch repairs with bituminous concrete, 40 mm with removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per Clause 503 back filling the pot holes with hot bituminous material using 60/70 grade bitumen @ 5.0% of total mix & mixed in hot mix plant 40-60 TPH capacity and carriage with all leads as per clause 509, compacting with smooth wheel roller 8-10 tonne, trimming & finishing the surface to form a smooth continuous surface, all as per MoRTH specification Clause 3004.2 |
| 7 | Supply, placing and compacting readymade cold bituminous pothole patching mix in accordance with IRC : 116-2014 Specifications in 50 Kg Plastic - lined sturdy bags with 10 Km. average lead for supply and 20 Km average lead for placement. Mix Shall contain at least 5.6 % MC-800 Cut-back bitumen and suitable anti-stripping agent. Mix shall be workable and usable for at least 6 months. All 50 Kg. bags shall be transported to a storage facility designated by the Engineer. Since the mix contains volatile kerosene, sealed bags shall not be stored in a closed building or warehouse. No open flame or smoking shall be permitted near the stored mix. |
| 8 | Painting with superior grade enamel paint of approved quality to give an even shade including writing littering figuring etc. complete as per IRC standards of:- |
| 9 | 5th Km. stone |
| 10 | Km. Stone for ODR & MDR |
| 11 | 200 M stone |
| 12 | Providing and erecting a \\"W\\" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ ground level, fixed on CRC rolled channel vertical post, 150 x 75 x 5 mm spaced 2 mm centre to centre, 1.8 m high, 1.1 m below ground / road level, all steel parts and fitments to be galvanized by hot dip process, all fittings to conform to IS: 1367 and IS: 1364 , metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per MoRTH specification Clause 811.3. |
| 13 | P & F Delineator with 15 cm. outer dia RCC Hume pipe NP-2 (As per IS-458/ 1971 ) pipe 1.0 M. Long 40 cm embedded in cement concrete (1:2:4) block of size 50x50x40 cm. including excavation up to 40 cm depth. The inside of pipe shall be filled with C.C. (1:2:4) stone grit max size 20 mm or less up to the top with semi circular humping. The pipes shall be painted white/black with enamel paint with red dots two Nos. on each side |
| 14 | Supply of Hazard Marker made out of 2 mm thick M.S. sheet size 300x300x3 mm framed with angle iron 25x25x3 mm and fixed on channel posts 75x40x6 mm and hold fast at bottom whole body is painted in white stoving enamel and 6 Nos., 5 cm dia reflective sheet on white reflective background with additional border of 1.25 cm all around it. |
| 15 | Providing and laying marking of center line and stop line etc with hot thermoplastic compound of approved quality with type-1 glass beeds (Table-800-9) , 2.5 mm thick on road/ plain surface, including reflectorising glass beads type-2 (Table-800-10) @ 250 gms per sqm area with special applicator machine, as per IRC:35 including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control involved. The finished surface to be level, uniform and free from streaks and holes as per clause 803 of MoRT&H Specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. |
| 16 | Providing and applying tack coat on the prepared surface, with bitumen emulsion RS-1 as per IS : 8887 & manufacturer’s specifications @ 2 kg /10sqm. With a self propelled or towed bitumen pressure sprayer equipped for spraying the material uniformly at specified rates and temperatures as per MoRTH specification Clause 503 & 112 ( Including cleaning of bituminous road surface ) Add extra to item No. 5.2 for 1Kg / 10 Sqm emulsion |
| 17 | Providing and laying bituminous concrete as per design mix on prepared surface with specified graded stone as per table 500-16 & 500-17 for wearing course including loading of aggregate with Front end loader and hot mixing of binder (including cost of anti-stripping compound, wherever required) and filler as per table 500-9 with aggregates in hot mix plant More than 60-90 TPH Transporting the mix material with tipper and laying with sensor paver finisher (as per clause 507.3.5) to the required level , grades and rolling with vibratory compactor and pneumatic tyred roller 150-250 KN,TP=0.7 Mpa, to achieve the desired density (approved by the department) excluding cost of primer/tack coat (MoRTH Specification : Clause -507 & 112) with all lead.Grading I (19 mm nominal size) - Bitumen @ minimum 5.20% of mix & thickness 50 mm VG 40 Gradw |
| 18 | Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing |
| 19 | 90 cm equilateral triangle |
| 20 | 60 cm equilateral triangle |
| 21 | 80 mm x 60 mm rectangular |
| 22 | 60 cm x 45 cm rectangular |
| 23 | Raised Payment Marker (Cats Eye): Supplying and Fixing of Molded Shank Raised Pavement Markers made of ABS Moulded body and Polycarbonate Reflective panels with Micro Prismatic Lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 35000 Kilogram tested in accordance to ASIM D 4280 & ASTM D 788. The Height of Road Stud is 20mm, Width 100mm, Length 100mm and minimum reflective area of 13 sqcm on each side.The Strength of detachment of the integrated cylender shank not less than 14+/-2mm (Thickness) and height not less than 30+ 2mm from the body. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive |
| 24 | Providing and laying marking of center line and stop line etc with hot thermoplastic compound of approved quality with type-1 glass beeds (Table-800-9) , 2.5 mm thick on road/ plain surface, including reflectorising glass beads type-2 (Table-800-10) @ 250 gms per sqm area with special applicator machine, as per IRC:35 including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control involved. The finished surface to be level, uniform and free from streaks and holes as per clause 803 of MoRT&H Specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. |
| 25 | Carrying out repair to road signs including strengthening resetting or otherwise repairing signs made out of Retro Reflective sheets. Job includes patch repair to aluminium sheet, R R Sheet, posts, signs / script and repainting of posts at damaged location / positions with approved quality of enamel paint complete in all respect conforming to respective IRC/MOST specifications and as directed by Engineer-in-charge. |
| 26 | Road sign Boards mounted on single post. |
| 27 | Road sign Boards mounted on double post. |
| 28 | Overhead gantry road sign boards |
| 29 | Supply of Chevron sign of size 75x60 cm made out of aluminum sheet 2 mm thick with fixing provision on M.S. angle iron post 50x50x6 mm 3 M long screwed with stainless steel nut bolts of 8 M dia, plate is covered by high intensity grade yellow retro-reflective sheeting and black screen printed arrow on Retro Reflective Sheet, complete in all respect. Comp. in all respect duly post painted in alternate band of Black/White synthetic enamel paint & hold fast at bottom Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 14, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 18, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 22 daysNov 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 22 daysNov 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender