Tender For Junction Improvement Works At Lc-48 On Nh-325 For Road Safety In Compliance With Disha Committee Directions In State Of Rajasthan.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
18 Nov 2026
23 days left
EMD
38820
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalore → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Junction Improvement Works At Lc-48 On Nh-325 For Road Safety In Compliance With Disha Committee Directions In State Of Rajasthan.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 14-Oct-2026 | Corrigendum No. 1 | Date | 18-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation, including stacking/disposal of surplus material with all lifts and lead up to 50 meters, exclusive of compensation of earth [MoRTH specification : Clause 301 to 305] In ordinary Soil |
| 2 | Dismantling of flexible pavements and disposal of dismantled materials up to a lead of 1000 meters, stacking serviceable and unserviceable materials separately as per MoRTH specification clause 202. By Mechanical Means : |
| 3 | Providing and laying granular sub-base material having P.I. not more than 6 including spreading in layers not exceeding 150 mm compacted thickness and consolidation by 8-10 tonne power roller to required camber and grade including cost of water and hire charges of machinery including T&P with all lead (Compacted thickness to be measured).as per MoRTH specification table 400-1, 400-2, For Grading II Material |
| 4 | Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, coarse aggregate 26.5mm nominal size aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing. as per MoRTH Specification cl. 601. |
| 5 | Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per MoRTH Specification cl. 602 (with flexural strengthe minimum 4.5 MPa) coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 31.5 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days with construction methedology as per clause 602.9.7 (in areas inaccessible to paving equipment) using curing compound and water finishing to lines and grade as per drawing and MoRTH Specification Clause 602 including vaccum dewatering process with all required equipments |
| 6 | Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M-10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 409.Using concrete mixture |
| 7 | Providing and erecting a \\"W\\" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ ground level, fixed on CRC rolled channel vertical post, 150 x 75 x 5 mm spaced 2 mm centre to centre, 1.8 m high, 1.1 m below ground / road level, all steel parts and fitments to be galvanized by hot dip process, all fittings to conform to IS: 1367 and IS: 1364 , metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per MoRTH specification Clause 811.3. |
| 8 | Providing and laying marking of center line and stop line etc with hot thermoplastic compound of approved quality with type-1 glass beeds (Table-800-9) , 2.5 mm thick on road/ plain surface, including reflectorising glass beads type-2 (Table-800-10) @ 250 gms per sqm area with special applicator machine, as per IRC:35 including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control involved. The finished surface to be level, uniform and free from streaks and holes as per clause 803 of MoRT&H Specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. |
| 9 | Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing |
| 10 | 90 cm equilateral triangle |
| 11 | 80 mm x 60 mm rectangular |
| 12 | 60 cm x 45 cm rectangular |
| 13 | Solar Raised Pavement Markers: As per ASTM D 4280 & ASTM D 788 Supply & Installation of Solar Raised Pavement Markers made of Aluminium Alloy Body with Squre shape, solar powered, LED self illumination in active mode. The solar stud marker shall support a load of 25000 kg tested in accordance to ASTM D 4280. The marker should be resistant to dust and water ingress according to lS:12063:1987 standard and should withstand temperatures in e of 10°C to 75°C. Color of lighting could be provided in red or yellow (amber) as per requirement and typical frequency blinking is 2Hz. There should be super bright LEDs (one gach side with over 5000 (Milicandle) luminous intensity) and its visibilty should not less than l000meter distance in night. The Height, width and length of the marker shall be less than 20mm,125mm, 125mm and it should have one cylinder type shank 30mm + / - 2mm and length of shank should be 60mm +1-5mm. Fixing will be by drilling holes on the road for the shanks ,to go inside, without nails and using epoxy resin based adhesive |
| 14 | Earth work in excavation for foundation of structure complete with all lift, dewatering shoring and shuttering etc. .including refilling of trenches in 25.mm layers, ramming, watering and disposal of surplus soil within a lead of 1000 meters, as per drawing and technical specification.[MoRTH Specification : Clause : 304] In ordinary Soil [MoRTH Specification : Clause : 301] Depth up to 3m |
| 15 | Cement concrete for plain/reinforced concrete in open foundation as per drawing and technical specification. [MoRTH Specification : Section 1700(N)&1500(N)]. Using Batching Plant, Transit Mixture, and Concrete Pump. P.C.C.M-15 grade |
| 16 | Stone masonry work in cement mortar 1:3 with mechanical mixer for foundation (any level) complete, including all scaffolding etc., excluding pointing and plastering as per drawing and technical specification. [MoRTH Specification: Section 1000,1400] Random Rubble Masonry (coursed/un-coursed). |
| 17 | Stone masonry work in cement mortar 1:3 for substructure complete, with scaffolding excluding pointing and plastering as per drawing and technical specification [MoRTH Specification: Section 1400] Coursed Rubble Masonry (Ist sort) Up to 5 meter height |
| 18 | Plaster on new surface with cement mortar (1:3) including racking of joint etc. complete fine finished 20mm thick. |
| 19 | Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces. New surface Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 14, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 18, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 23 daysNov 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 23 daysNov 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender