Tender For Construction Of Minor Bridge 7×3 M Span, Approach Road, And Additional Approach Road At Aril River On Anandpur To Fulchiyai Road Under Dataganj Vidhansabha Of District Budaun.
Tender Value
1.57 Crore
Estimated cost
Bid Submission
06 Oct 2026
4 days left
EMD
9.85 Lakhs
Bank guarantee accepted
Document Fee
2714
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Budaun → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Minor Bridge 7×3 M Span, Approach Road, And Additional Approach Road At Aril River On Anandpur To Fulchiyai Road Under Dataganj Vidhansabha Of District Budaun.
BOQ
| Sl. No. | Item Description |
| 1 | Construction of Subgrade and earthen shoulders with apporved material obtained from borrow pits with attl ifts and leads transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300.2 as per Tecnical Specification Clause 303.1 |
| 2 | Construction of embankment with material obtained from borrow pits construction of embankment with approved material obtained form borrow pit with all lifts upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-1 and 300.2 as per Tecnical Specification Clause 301.5 |
| 3 | Providing laying and spreading material on a prepared sub grade adding cement@2% by weight to the spread material manually mixing in place with rotavator and compacting with rhe road foller at OMC to achieve the desired unconfined compressived strength and to from a layer of sub-base. |
| 4 | Providing laying and spreading material on a prepared sub base cement @4% by ewight to rhe spread meterial manually mixing in place with rotavator and compacting with the road roller at OMC to achueve the desired unconfined compressive strength and to form a layer of base |
| 5 | Providing and applying tack coat with Bitumen (VG-10) using emulsion distributor at the rate of 0.35 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 5.2-503(iii) |
| 6 | Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of Type as per Technical Specification Clause 5.9-508 |
| 7 | Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 5.12-510. |
| 8 | Excavation for roadway in soil using mechnical means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per Technical Specification Clause 302.3 |
| 9 | Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 |
| 10 | Brick Masonry Work in Cement Mortar 1:3 in Foundation complete excluding Pointing and Plastering, as per Drawing and Technical Specifications Clause no.600,1200&1203 |
| 11 | Supply & laying of compacted 40 mm gauge brick ballast around and below hume pipe (As per N.S. Item No. 2 C) |
| 12 | Struck pointing with cement mortar consisting of one part cement and 2 part of fine sand of 1.25 F.M. on brick work including supply of all material, labour and T & P etc. required for proper completionof the work. (S.I.No. 574) |
| 13 | Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 |
| 14 | Supply of R.C.C. Hume Pipe NP-3 1000 mm dia |
| 15 | Supply of R.C.C. Hume Pipe NP-3 350 mm dia |
| 16 | Laying & Fixing of R.C.C. Hume Pipe (NP3) as per direction of E/I H.P.1000 mm dia NP3 |
| 17 | Laying & Fixing of R.C.C. Hume Pipe (NP3) as per direction of E/I H.P.350 mm dia NP3 |
| 18 | Providing and laying Filter material underneath pitching in slopes complete as per drawing and Technical specification MORTH 2504 Sr no. 16.05 |
| 19 | Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications MORTH 2503 Sr No. 16.01 |
| 20 | Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing bymix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specificatin Clause 401. |
| 21 | Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and MORT&H sr. 12.08 Technical Specifications 1500,1700 & 2100. PCC Grade M15 |
| 22 | Reinforced Cement Concrete Grade M30 using batching plant, transite mixer & concrete pump in Well Foundation complete as per Drawing and Technical Specification. 12.08 G |
| 23 | Reinforced Cement Concrete Grade M35 using batching plant, transite mixer & concrete pump in Well Foundation complete as per Drawing and Technical Specification. |
| 24 | Supplying, fitting and placing HYSD bar reinforcement in super-structure complete as per drawing and technical specifications |
| 25 | Providing Weephole in rainforcement concreet slab ,abutment,wing wall with 100 mm dia ac pipe extending through the full width of the structure with slop of 1V:20H towards drawing face ,complete as per drawing and specifacation as MORTH Spec 2706 and 2200 |
| 26 | Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1 litre for 2 sqm. MORTH 800 Sr no. 14.16 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender