Tender For Construction Of Utility Duct In Hamirpur Town From D.C. Office Chowk To Bhota Chowk Via Main Bazar And Back From Bhota Chowk To D.C. Office Chowk Via Existing Main Bus-Stand, And Nadaun Chowk Upto M/S Milkhi Ram Petrol Pump Km 0/0 To 2/885
Tender Value
29.70 Crore
Estimated cost
Bid Submission
05 Oct 2026
3 days left
EMD
39.70 Lakhs
Bank guarantee accepted
Document Fee
30000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hamirpur → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Utility Duct In Hamirpur Town From D.C. Office Chowk To Bhota Chowk Via Main Bazar And Back From Bhota Chowk To D.C. Office Chowk Via Existing Main Bus-Stand, And Nadaun Chowk Upto M/S Milkhi Ram Petrol Pump Km 0/0 To 2/885. (Sh:- Construction Of Main Duct From D.C. Office Chowk To Bhota Chowk Via Main Bazaar Including Civil Work, Infrastructure Of Hpsebl & Jsv Km 0/0 To 1/300).
BOQ
| Sl. No. | Item Description |
| 1 | CIVIL WORKEarth work in excavation for all type of road structure such as retaining walls, breast walls, culverts, drain and Parapets etcetra in all type of classification of soil comprising of ordinary soil, ordinary rock, hard rock chiseling /wedging out rocks (Where blasting is prohibited) as per drawings and M.O.R.D. technical specification section 300 and 1600 and as per direction of the Engineer- In – Charge including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal of materials upto any lead and lift including dressing of sides, bottom and back filling in trenches with excavated suitable approved material to the original surface in layer not executing 150 mm (one hundred fifty millimetre) compacted thickness including shoring and strutting and pumping and bailing out water (surface and sub soil water ) upto any depth any quantam of water including cleaning of slush which may arise out during dewatering complete as per direction of Engineer-in-Charge. Including carriage of materials within all leads, lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 2 | Providing and laying in position cement concrete 1:3:6 (One Cement : three coarse sand: six graded stone aggregate 40 mm (Forty millimetre) nominal size of specified grade excluding the cost of centering and shuttering - All work up to any height and depth including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 3 | Providing and laying in position cement concrete of specified grade 1:4:8 (one cement : four coarse sand : eight graded stone aggregate) 40mm ( forty millimetre) nominal size graded stone aggregate for all works upto any height and depth excluding the cost of centering and shuttering including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 4 | Centering and shuttering including strutting, propping etcetra. and removal of form work for Suspended floors, roofs, landings, balconies and access plat form including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 5 | Centering and shuttering including strutting, propping etcetra. and removal of form work for Walls (any thickness) including attached pilastgers, buttresses, plinth and string courses etcetera including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 6 | Providing and laying Steel Fibre Reinforced Concrete (SFRC) using Dramix 4D (Four D) steel fibres, cement concrete design mix M-30 (M-Thirty) grade with minimum cement content not less than 430kg/cum (Four hundred thirty kilogramme per cubic metre), complete as per drawings and technical specifications, excluding the cost of centring, shuttering, finishing and reinforcement, for all works up to all heights and depths in foundations, footings, bases of columns and the like; and mass concrete, including the entire carriage of materials within all leads and lifts, as per drawings and technical specifications and as directed by the Engineer-in-Charge, including all incidentals. The rates are inclusive of octroi, royalty, malkana, toll tax, sales tax or other taxes imposed by the Government but excluding GST. |
| 7 | Providing and laying Reinforced cement concrete design mix M-30 (Thirty) grade with minimum cement content not less than 430kg/cum (Four hundred thirty kilogramme per cubic metre) with fine steel including reinforcement complete as per drawing and technical specifications excluding the cost of centering, shuttering, finishing and reinforcement in all work upto all height and depths in foundation, footings , bases of columns and the like; and mass concrete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 8 | Steel reinforcement (TATA /SAIL make) for reinforced cement concrete work including straightening, cutting, bending, placing in position and binding all height and depth including cost of binding wire upto all floor level mild steel and medium tensile steel bars of grade Fe-500D (Five hundred) or more including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 9 | Providing and placing in position 100 mm (One millimetre) thick factory made machine batched and machine mixed Precast RCC Rectangular Covers on drains of footpath of various sizes, of design mix M-25 (M-Twenty five) grade cement concrete with minimum cement content not less than 420kg/cum (Four hundred twenty kilogramme per cubic metre) for RCC work, including cost of centering, shuttering, reinforcement of 8 mm (Eight millimetre) dia TMT bars of Fe 500 (Five hundred) grade @ maximum 100mm (One hundred millimetre) center to center on both ways , neat cement punning on finished surface, properly encased on all edges with 1.6 mm (One point six millimetre) thick , 100 mm (One hundred millimetre) wide MS sheet duly painted over priming coat , reinforcement to be welded at edges with MS sheet and providing 2 Nos. (Two numbers) 12 mm (Twelve millimetre) dia bar for hooks etcetera including cost of carriage, all leads and lift, handling at site etcetera all complete as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 10 | Steel work welded in built up sections (TATA/ SAIL Make ) in framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etcetra as required in gratings, door and window frames, guard bar, ladder, railings, brackets, gates and similar works complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 11 | Providing and applying priming coat with bitumen Emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer @ 0.70 to 1.00kg/sqm (Zero point seven zero to one kilogram per square metre) using mechanical means as per Technical Specification and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 12 | Providing and applying tack coat using bitumen emulsion conforming to IS:8887, using emulsion pressure distributer including preparing the surface and cleaning with mechanical broom.- With Rapid setting bitumen emulsion -bituminous surface @ 0.275kg/sqm (Zero point two seven five kilogramme per square metre) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 13 | Providing and laying Dense Graded Bituminous Macadam using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, 50 to 100 mm (Fifty to one hundred millimetre) average compacted thickness with bitumen of grade VG-30 (Viscosity Grade-Thirty) @ 4.5% (four point five percent) (percentage by weight of total mix) and lime filler @ 2% (Two percent) (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 14 | Providing and laying Bituminous concrete 30 mm (Thirty millimetre) compacted thickness with bitumen of grade VG-30 (VISCOSITY GRADE-THIRTY) @ 5.5% (Five point five percent) (percentage by weight of total mix) and lime filler @ 2% (Two percent) (percentage by weight of Aggregate) using crushed stone aggregates of specified grading, premixed with bituminous binder and filler prepared in batch Type Hot Mix Plant of 100-120 (Hundred two One hundred twenty) TPH capacity, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification complete and as per directions of Engineer-in-Charge including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 15 | Providing and applying 2.5 mm (Two point five millimetre) thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etcetera complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 16 | Construction of granular sub-base by providing close graded Material conforming to secifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads and lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, With material conforming to Grade-I size range 75 mm to 0.075 mm (Seventy five to zero point zero seven five millimetre) having CBR Value-30 complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 17 | Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm) (fifty three millimetres to zero point zero seven five millimetres) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne (eight to ten tonne) capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge including entire carriage of materials within all leads and lifts nd other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 18 | Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping site to be arranged by the contractor for all lifts and leads and complete as per directions of Engineer-in-Charge including entire carriage of materials within all leads and lifts nd other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 19 | Providing and fixing plastic tube sheet in back side of Shuttring complete includingcarriage of meterials in all leads and lifts. complete as per directions of Engineer-in-Charge including entire carriage of materials within all leads and lifts nd other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 20 | Providing and fixing shailtax joint filler board 25 mm (Twenty five millimetre) thick for expansion joint. completeas per approved drawing and direction of Engineer-in-Charge. including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 21 | Providing and fixing in position at and jointing at all level/ depths ISI marked HDPE DWC in trenches in complete including all material, labour, testing and commissioning as per Technical Specifications and as per direction of Engineer. HDPE Pipe 300 mm (Three hundred millimetre) Dia GST. as per direction of Engineer-in-Charge. Including carriage of materials within all leads, lifts and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 22 | Providing and fixing in position at and jointing at all level/ depths ISI marked HDPE DWC in trenches in complete including all material, labour, testing and commissioning as per Technical Specifications and as per direction of Engineer. HDPE Pipe 200 mm (Two hundred millimetre) Dia. as per direction of Engineer-in-Charge. Including carriage of materials within all leads, lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 23 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm (at the rate of zero point nine zero per ten square metre) over an under coat of primer applied @ 0.80 ltr/ 10 sqm (at the rate of zero point eight zero per ten square metre) (ASAIN,NEROLAC,ICI-DULUX, Beger, (Luxol High Glass)Shalimar paint ( premium apecolite Gloss) of approved brand and manufacture including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 24 | Finishing walls with water proofing cement paint of required shade :New work (Two or more coats applied @ 3.84 kg/10 sqm (Three point eight four kilogramme per ten square metre) of approved brand and manufacture including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 25 | ELECTRICAL WORKSProviding and fixing of 11 KV , HT cable XLPE 1 CORE 400SQ.MM (Four hundred square millimetre), Al (1spare) to complete in all respects as per direction of Engineer Incharge Make - Havells/KEI/Polycab ( as specified by HPSEBL norms) to complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 26 | Providing and fixing of 11 KV , HT cable XLPE 3 CORE 400SQ.MM (Four hundred square millimetre) to complete in all respects as per direction of Engineer Incharge Make - Havells/KEI/Polycab ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 27 | Providing and fixing of 11KV , HT cable XLPE 3 CORE 95 SQ.MM (Ninety five square millimetre) to complete in all respects as per direction of Engineer Incharge Make - Havells/KEI/Polycab( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 28 | Providing and fixing of Straight through joint kit 1 Core for 11 KV 400 mm2 (Four hundred square millimetre) to complete in all respects as per direction of Engineer Incharge Make-Raychem/3-M electro/Denson ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 29 | Providing and fixing of Straight through joint kit 3 Core for 11 KV 240- 400 mm2 (Four hundred square millimetre) to complete in all respects as per direction of Engineer Incharge Make-Raychem/3-M electro/Denson ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 30 | Providing and fixing of Straight through joint kit 3 Core for 11 KV 95 mm2 (Ninety five square millimetre ) to complete in all respects as per direction of Engineer Incharge Make-Raychem/3-M electro/Denson ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 31 | Providing and fixing of Touch proof Double-end termination (both cable) kit 11 KV 1core XLPE Cable 240-400mm2 (Two hundred forty two four hundred square millimetre) to complete in all respects as per direction of Engineer Incharge Make-Raychem/3-M electro/Denson ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 32 | Providing and fixing of Touch proof End termination kit 11 KV 3core XLPE Cable 70-400mm2 (Seventy to four hundred square millimetre) to complete in all respects as per direction of Engineer Incharge Make-Raychem/3-M electro/Denson ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 33 | Providing and fixing of End terminal kit 11 KV 1core XLPE Cable 240-400mm2 (Two hundred forty two four hundred square millimetre) to complete in all respects as per direction of Engineer Incharge Make-Raychem/3-M electro/Denson ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 34 | Providing and fixing of End terminal kit 11 KV 3 core XLPE Cable 95mm2 (Ninety five square millimetre ) to complete in all respects as per direction of Engineer Incharge Make-Raychem/3-M electro/Denson ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 35 | Providing and fixing of 11kv (Eleven kilovolt) HT Panel RMU 3 Way (Three Way) (VCB-1 (VCB-One), LBS-2 (LBS-Two)) to complete in all respects as per direction of Engineer Incharge Make-ABB/Schneider/Siemens Rated Voltage: 12 kV (Twelve kilovolt) / 11 kV (Eleven kilovolt) (system voltage), designed to withstand up to impulses of 75 kV (Seventy five kilovolt) BIL (Basic Insulation Level).Rated Frequency: 50 Hz (Fifty hertz).Busbar Rated Current: 630 A (Six hundred thirty ampere), including SF6 Insulated, FRTU, modem and other accesories Enclosure Protection: IP67 (IP sixty seven) (outdoor/indoor variants) with stainless steel or robust metal sheet construction. ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 36 | Providing and fixing of 11kv (Eleven kilovolt) HT Panel RMU 5 Way (Five Way) (VCB-2 (VCB-Two), LBS-3 (LBS-Three))Rated Voltage: 11 kV (Eleven kilovolt) (Nominal) / 12 kV (Twelve kilovolt) to 15 kV (Fifteen kilovolt) (Maximum system voltage)Rated Frequency: 50 Hz (Fifty hertz)Busbar Rated Current: 630 A (Six hundred thirty ampere) including SF6 Insulated, FRTU, modem and other accesories Degree of Protection: IP67 (IP sixty seven) for outdoor enclosures / IP41 (IP forty one) for indoor setups to complete in all respects as per direction of Engineer Incharge Make-ABB/Schneider/Siemens ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 37 | Providing and fixing of 11kv (Eleven kilovolt) HT Panel RMU 6 Way (Six Way) (VCB-2 (VCB-Two), LBS-4 (LBS-Four)) Rated Voltage12 kV (Twelve kilovolt) / 24 kV (Twenty four kilovolt) ( nominal 11 kV (Eleven kilovolt) / 33 kV (Thirty three kilovolt) systems)Insulation Medium SF₆ Gas (typically at 1.2 to 1.4 Bar relative pressure)Arc Quenching MediumVacuum Interrupters (for circuit breaker ways)Rated Normal Current (Busbar / LBS)630 A (Six hundred thirty ampere), including SF6 Insulated, FRTU, modem and other accesories Enclosure Protection ClassIP67 (IP sixty seven) (for sealed tank), IP54 (IP fifty four) (for outer housing/cabinet) to complete in all respects as per direction of Engineer Incharge Make-ABB/Schneider/Siemens ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 38 | Providing and fixing of 11kv (Eleven kilovolt) HT Panel RMU 7 Way (Seven Way) (VCB-3 (VCB-Three), LBS-4 (LBS-Four)) ated Voltage: 11 kV (Eleven kilovolt) to 24 kV (Twenty four kilovolt) (Highest system voltage up to 12 kV (Twelve kilovolt) or 24 kV (Twenty four kilovolt))Rated Current: 630 A (Six hundred thirty ampere) including SF6 Insulated, FRTU, modem and other accesories Enclosure Protection Class: IP67 (IP sixty seven) for the gas tank, IP47 (IP forty seven) or better for the outer outdoor enclosure to complete in all respects as per direction of Engineer Incharge Make-ABB/Schneider/Siemens ( as specified by HPSEBL norms) to complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 39 | Providing and fixing of 400 kVA (Four hundred kilovolt ampere), (Oil TypeHermeatically sealedTransformer) with11kV (Eleven kilovolt) SF6 Insulatedcompact switchgearwith SF6 / VacuumCircuit Breaker asprotection totransformer LTSwitchgear Outdoor, HV: 3 WAY (Three Way) (2 Nos (Two Nos) Isolators + 1 No (One No) Breaker), 630A (Six hundred thirty ampere), 21 KA (Twenty one kiloampere); LV Incomer: 4P (Four pole) ACB, 1000 A (One thousand ampere), 50KA (Fifty kiloampere); Outgoing TPN MCCB 250/125 A (Two hundred fifty/one hundred twenty five ampere), 35KA (Thirty five kiloampere) 5No. (Five No.) to complete in all respects as per direction of Engineer Incharge Make-ABB/Schneider/Siemens( as specified by HPSEBL norms) to complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 40 | Providing and fixing of 1.1kV (One point one kilovolt) cable XLPE, 1 (One) Single core 630mm2 (Six hundred thirty square millimetre) armoured cable to complete in all respects as per direction of Engineer Incharge Make - Havells/KEI/Polycab( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 41 | Providing and fixing of 1.1kV (One point one kilovolt) cable XLPE, 1 (One) Single core 300mm2 (Three hundred square millimetre) armoured cable (1 (One) spare) to complete in all respects as per direction of Engineer Incharge Make - Havells/KEI/Polycab( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 42 | Providing and fixing of 1.1kV (One point one kilovolt) cable XLPE, 3.5 core (Three point five core) 300mm2 (Three hundred square millimetre) armoured cable to complete in all respects as per direction of Engineer Incharge Make - Havells/KEI/Polycab ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 43 | Providing and fixing of Distribution LT Panel and LILO with aluminium busbar and 250 A MCCB to complete in all respects as per direction of Engineer Incharge Make-ABB/Schneider/Siemens or equivalent ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 44 | Providing and fixing of Distribution LT Panel and LILO with aluminium busbar and 400 A MCCB to complete in all respects as per direction of Engineer Incharge Make-ABB/Schneider/Siemens or equivalent ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 45 | Providing and fixing of 1.1kV V LT Cable XLPE, 2C 10mm2 (Ten square millimetre) armoured Cable to complete in all respects as per direction of Engineer Incharge Make - Havells/KEI/Polycab ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 46 | Providing and fixing of 1.1kV LT Cable XLPE, 2Core 16mm2 (Sixteen square millimetre) armoured Cable to complete in all respects as per direction of Engineer Incharge Make - Havells/KEI/Polycab ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 47 | Providing and fixing of 1.1kV LT Cable XLPE, 3.5Core 25mm2 (Twenty five square millimetre) armoured Cable to complete in all respects as per direction of Engineer Incharge Make - Havells/KEI/Polycab ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 48 | Providing and fixing of 1.1kV LT Cable XLPE, 3.5Core 35mm2 (Thirty five sqaure millimetre) armoured Cable to complete in all respects as per direction of Engineer Incharge Make - Havells/KEI/Polycab ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 49 | Providing and fixing of 1.1kV LT Cable XLPE, 3.5Core 50mm2 (Fifty square millimetre) armoured Cable to complete in all respects as per direction of Engineer Incharge Make - Havells/KEI/Polycab ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 50 | Providing and fixing of 1.1kV LT Cable XLPE, 3.5Core 70mm2 (Seventy sqaure millimetre) armoured Cable to complete in all respects as per direction of Engineer Incharge Make - Havells/KEI/Polycab ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 51 | Providing and fixing of 1.1kV LT Cable XLPE, 3.5Core 95mm2 (Ninety five square millimetre) armoured Cable to complete in all respects as per direction of Engineer Incharge Make - Havells/KEI/Polycab ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 52 | Providing and fixing of G.I wire 8 SWG (Eight SWG) to complete in all respects as per direction of Engineer Incharge IS 280-1978 (IS Two hundred eighty-1978) and IS 7887-1975 (IS Seven thousand eight hundred eighty seven-1975) or the latest version thereof Make- Shark Steel/TCM/Partap wires ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 53 | Providing and fixing of LT panel for distribution 250 KVA (Two hundred fifty kilovolt ampere) MS Sheet of 1.6 mm (One point six millimetre) ( 1100x800x275 mm (One thousand one hundred into eight hundred into two hundred seventy five millimetre) ) cubide Box complete with stand etc and Al Busbar 40x6 mm (Forty into six millimetre) ( min. 100 Amp (One hundred ampere) ) , AI 50X50X6 mm (Fifty into fifty into six millimetre) of length 2.2 Mtr (Two point two metre) inside .painted /powder coated after primar coating With Copper thimbles of 200 Amp (Two hundred ampere), Insulating sleeves etc. MCCB 400 amp (Four hundred ampere) 3P (Three pole) 50kA (Fifty kiloampere) -1 No. (One No.) Havalle, Schneider ,ABB or equivalent make ICS 100 % (One hundred percent) ICU & MCCB 250 Amp (Two hundred fifty ampere) 36 kA (Thirty six kiloampere) =3 nos (Three nos) to complete in all respects as per direction of Engineer Incharge ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 54 | Providing and fixing of LT panel for distribution 400 KVA (Four hundred kilovolt ampere) MS Sheet of 1.6 mm (One point six millimetre) ( 1100x800x275 mm (One thousand one hundred into eight hundred into two hundred seventy five millimetre) ) cubide Box complete with stand etc and Al Busbar 40x6 mm (Forty into six millimetre) inside .painted /powder coated after primar coating Fitted with Bakelite sheet ,500 Amp (Five hundred ampere) Copper thimble MCCB 630 amp (Six hundred thirty ampere) 3P (Three pole) 50kA (Fifty kiloampere) -1 No. (One No.), Make L&T,Schneider Havalles,ABB or equivalant, MCCB 250 Amp (Two hundred fifty ampere) 36 kA (Thirty six kiloampere) 3P (Three pole) of L&T,Havalle, Schneider ,ABB or equivalent make -3 Nos (Three Nos) to complete in all respects as per direction of Engineer Incharge ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 55 | Providing and fixing of LT panel for distribution 630 KVA (Six hundred thirty kilovolt ampere) MS Sheet of 1.6 mm (One point six millimetre) ( 1800x1000x700 mm (One thousand eight hundred into one thousand into seven hundred millimetre) ) cubide Box complete with stand etc and Al Busbar inside .painted /powder coated after primar coating Fitted with Bakelite sheet ,1000 Amp (One thousand ampere) Copper thimble ACB 1000 amp (One thousand ampere) 3P (Three pole) 50kA (Fifty kiloampere) -1 No. (One No.), Make L&T,Schneider,Havells,ABB or equivalent, MCCB 400 Amp (Four hundred ampere) 50 kA (Fifty kiloampere) 3P (Three pole) of L&T Schneider, ABB,Havalle or equivalent make -3 Nos (Three Nos) to complete in all respects as per direction of Engineer Incharge ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 56 | Providing and designing Chemical Earth Copper Bonded Rod With Back Fill Compound & Conductive gel, Earth Pit Cap etc as per UL 467 (UL Four hundred sixty seven)complete in all respect to complete in all respects as per direction of Engineer Incharge ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 57 | Providing and fixing of GI strip 40x6 mm (Forty into six millimetre) as per IS 3043:2018 to complete in all respects as per direction of Engineer Incharge ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 58 | Providing and fixing of 11kV, 3Core 240sqmm (Two hundred forty square millimetre), Aluminum HT cable to complete in all respects as per direction of Engineer Incharge Make - Havells/KEI/Polycab ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 59 | Providing and fixing of 1.1kV (One point one kilovolt), 3.5Core (Three point five Core) x 185 sqmm (One hundred eighty five square millimetre), Armoured, XLPE insulated to complete in all respects as per direction of Engineer Incharge Make - Havells/KEI/Polycab( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 60 | Providing and fixing of 1.1KV (One point one kilovolt), 3Core (Three Core) x 1.5Sqmm (One point five square millimetre), Copper Control cable to complete in all respects as per direction of Engineer Incharge Make - Havells/KEI/Polycab( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 61 | Providing and fixing of Prov. Distribution box 400A (Four hundred ampere) (5 way (Five way) busbar, 3 phase (Three phase), 1 neutral (One neutral)) to complete in all respects as per direction of Engineer Incharge Make- Renit power/Havells/L&T ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 62 | Providing and fixing of Prov. Distribution box 200A (Two hundred ampere) (5 way (Five way) busbar, 3 phase (Three phase), 1 neutral (One neutral)) to complete in all respects as per direction of Engineer Incharge Make- Renit power/Havells/L&T ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 63 | Providing and fixing of Prov. Distribution box 100A (One hundred ampere) (5 way (Five way) busbar, 3 phase (Three phase), 1 neutral (One neutral)) to complete in all respects as per direction of Engineer Incharge Make- Renit power/Havells/L&T ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 64 | Providing and fixing of Wiring of duct light point using 4x4.0 sq.mm (Four into four square millimetre) HRFRLS PVC insulated single-core flexible copper cables along with 1 No. (One No.) 4.0 sq.mm (Four square millimetre) HRFRLS PVC insulated earthing cable drawn through surface/recessed ISI-marked PVC conduit, including supply and fixing of GI saddles/clamps at every 0.5 meter (zero point five metre), necessary conduit accessories, cable lugs, terminations, drilling holes for fixing saddles/conduits/bend/junction boxes as required. to complete in all respects as per direction of Engineer Incharge Make- Havells/Bajaj/Crmpton/Wipro ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 65 | Providing and fixing of Weatherproof junction box made of high-quality, impact-resistant, self-extinguishing polycarbonate/ABS material. to complete in all respects as per direction of Engineer Incharge Make- Havells/Bajaj/Crmpton/Wipro ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 66 | Providing and fixing of Providing fixing of duct light control system panel to complete in all respects as per direction of Engineer Incharge Make- Havells/Bajaj/Crmpton/Wipro ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 67 | Providing and fixing of Duct light wiring for 16amp (Sixteen ampere) MCB SP in existing Power distribution waterproof Enclosure ABS IP66 at Chamber (at every Man hole entry) with 2x1.5 Sq. mm (Two into one point five square millimetre) PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing PVC conduit PVC conduit along with 1 No.1.5 Sq.mm. (One No. one point five square millimetre) HRFRLS/PVC insulated single core copper conductor cable for earthing as required Make- Havells/Bajaj/Crmpton/Wipro (Excluding 16A (Sixteen ampere) SP MCB) to complete in all respects as per direction of Engineer Incharge ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 68 | Providing and fixing of Single Pole 16A (Sixteen ampere) MCB and PVC Gang Box weather-resistant electrical enclosure to complete in all respects as per direction of Engineer Incharge Make- Havells/Bajaj/Crmpton/Wipro ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 69 | Providing and fixing of Water and dust proof industrial LED bulkhead luminaire, 20W (Twenty watt) to complete in all respects as per direction of Engineer Incharge Make- Havells/Bajaj/Crmpton/Wipro ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 70 | Providing and fixing of Providing of DWC-HDPE pipe of 160x136 (One hundred sixty into one hundred thirty six) to complete in all respects as per direction of Engineer Incharge as IS 4984-1995 (IS Four thousand nine hundred eighty four-1995) specification for high density polytehene with latest amendment ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 71 | Providing and fixing of Providing of DWC-HDPE pipe of 120x103 (One hundred twenty into one hundred three) to complete in all respects as per direction of Engineer Incharge IS 4984-1995 (IS Four thousand nine hundred eighty four-1995) specification for high density polytehene with latest amendment ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 72 | Providing and fixing of Providing of DWC-HDPE of 75x61 (Seventy five into sixty one) to complete in all respects as per direction of Engineer Incharge IS 4984-1995 (IS Four thousand nine hundred eighty four-1995) specification for high density polytehene with latest amendment ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 73 | Providing and fixing of Providing of DWC-HDPE pipe of 40x32 (Forty into thirty two) to complete in all respects as per direction of Engineer Incharge IS 4984-1995 (IS Four thousand nine hundred eighty four-1995) specification for high density polytehene with latest amendment ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 74 | Providing and fixing of SS Gland 25 mm (Twenty five millimetre) complete in all respects as per direction of Engineer Incharge as per IEC 624444 (IEC Sixty two thousand four hundred forty four) Make-Dowells/Comet/Braco/FCG (as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 75 | Providing and fixing of SS Gland 28 mm (Twenty eight millimetre) complete in all respects as per direction of Engineer Incharge as per IEC 624444 (IEC Sixty two thousand four hundred forty four) Make-Dowells/Comet/Braco/FCG (as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 76 | Providing and fixing of SS Gland 32 mm (Thirty two millimetre) complete in all respects as per direction of Engineer Incharge as per IEC 624444 (IEC Sixty two thousand four hundred forty four) Make-Dowells/Comet/Braco/FCG (as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 77 | Providing and fixing of Providing of SS Gland 38 mm (Thirty eight millimetre) to complete in all respects as per direction of Engineer Incharge as per IEC 624444 Make-Dowells/Comet/Braco/FCG ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 78 | Providing and fixing of Providing of SS Gland 45 mm (Forty five millimetre) to complete in all respects as per direction of Engineer Incharge ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 79 | Providing and fixing of Providing of SS Gland 50 mm (Fifty millimetre) to complete in all respects as per direction of Engineer Incharge as per IEC 624444 Make-Dowells/Comet/Braco/FCG ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 80 | Providing and fixing of Providing of SS Gland 57 mm (Fifty seven millimetre) to complete in all respects as per direction of Engineer Incharge as per IEC 624444 Make-Dowells/Comet/Braco/FCG ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 81 | Providing and fixing of Prov. Single core LT end termination kit 300-400mm2 (Three hundred to four hundred square millimetre) to complete in all respects as per direction of Engineer Incharge Make-Raychem/3-M electro/Denson ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 82 | Providing and fixing of Prov. 3.5core LT end termination kit 25-150 mm2 (Twenty five to one hundred fifty square millimetre) to complete in all respects as per direction of Engineer Incharge Make-Raychem/3-M electro/Denson ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 83 | Providing and fixing of Prov. 3.5core LT end termination kit 185-240 mm2 (One hundred eighty fiv e to two hundred forty square millimetre) to complete in all respects as per direction of Engineer Incharge Make-Raychem/3-M electro/Denson ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 84 | Providing and fixing of Prov. 3.5core LT end termination kit 300-400 mm2 (Three hundred to four hundred square millimetre) to complete in all respects as per direction of Engineer Incharge Make-Raychem/3-M electro/Denson ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 85 | Providing and fixing of Prov.Single core LT end termination kit 630 mm2 (Six hundred thirty square millimetre) to complete in all respects as per direction of Engineer Incharge Make-Raychem/3-M electro/Denson ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 86 | Providing and fixing of End terminal kit 11 KV 3 core XLPE Cable 240- 400 mm2 (Two hundred forty to four hundred square millimetre) to complete in all respects as per direction of Engineer Incharge Make-Raychem/3-M electro/Denson ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 87 | Providing and fixing of Fire Extinguisher MECH FOAM 9 LTR to complete in all respects as per direction of Engineer Incharge Make-Safex/canex/cease ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 88 | Providing and fixing of Fire Extinguisher CO2 CAP 5.0/ 6.0 KG (Five/six kilogramme)to complete in all respects as per direction of Engineer Incharge Make-Safex/canex/cease ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 89 | Providing and fixing of Fire Extinguisher DCP 5.0/6.0 KG (Five/Six kilogramme) to CAP complete in all respects as per direction of Engineer Incharge Make-Safex/canex/cease ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 90 | Providing of 15 (Fifteen) Watt search light with battery to complete in all respects as per direction of Engineer Incharge as per IS- 16101:2012 Make- AKTION/Philips/Bajaj ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 91 | Providing and fixing of Electrical insulating Mat, Blue, Class B, 2.5mm (Two point five millimetre) thick (Roll size width-1mtr, length-10mtr) to complete in all respects as per direction of Engineer Incharge Make- Raychem/Vardhman/X-volt( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 92 | Providing of 11KV (Eleven kilovolt) High Voltager detector to complete in all respects as per direction of Engineer Incharge Make- Motwane/Relco/Honeybell ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 93 | Providing of Socket Set to complete in all respects as per direction of Engineer Incharge Make-Havells/Anchor ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 94 | Providing of Thermal Camera to complete in all respects as per direction of Engineer Incharge Make- Hikmicro/fulke/Bosch ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 95 | Providing of Clamp Meter/Tong tester to complete in all respects as per direction of Engineer InchargeMake- Megger/fulke/kyritsu/Dillo ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 96 | Providing of Megger to complete in all respects as per direction of Engineer Incharge Make- Megger/fulke/kyritsu/Dillo ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 97 | Providing of Earth Tester to complete in all respects as per direction of Engineer Incharge Make- Megger/fulke/kyritsu/Dillo ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 98 | Providing of Crimping Tool to complete in all respects as per direction of Engineer Incharge Make:-Bosch/Taparia/Voltz/Jainsons( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 99 | Providing of Cable shaving Tool to complete in all respects as per direction of Engineer Incharge Make- Megger/Baur/Doble( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 100 | Providing of Torque wrench to complete in all respects as per direction of Engineer Incharge Make- Megger/Baur/Doble( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 101 | Providing of HT Gloves to complete in all respects as per direction of Engineer Incharge Make- Raychem/Honeywell/Jyco/Udyogi ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 102 | Providing of LT Gloves to complete in all respects as per direction of Engineer Incharge Make- Raychem/Honeywell/Jyco/Udyogi ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 103 | Providing of Safety Helmet to complete in all respects as per direction of Engineer Incharge Make- Raychem/Honeywell/Jyco/Udyogi ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 104 | Providing of Safety Shoes to complete in all respects as per direction of Engineer Incharge Make- Raychem/Honeywell/Jyco/Udyogi ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 105 | Providing and fixing of Al Lugs 400sq mm (Four hundred square millimetre) to complete in all respects as per direction of Engineer Incharge Electrolyte grade aluminium with copper coating to protect from galvanic corrosion Make-Dowells/Bosch/ADR ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 106 | Providing and fixing of Al Lugs 240sq mm (Two hundred forty square millimetre) to complete in all respects as per direction of Engineer Incharge Electrolyte grade aluminium with copper coating to protect from galvanic corrosion Make-Dowells/Bosch/ADR ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 107 | Providing and fixing of Al Lugs 120sq mm (One hundred twenty square millimetre) to complete in all respects as per direction of Engineer Incharge Electrolyte grade aluminium with copper coating to protect from galvanic corrosion Make-Dowells/Bosch/ADR ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 108 | Providing and fixing of Al Lugs 95sq mm (Ninety five square millimetre) to complete in all respects as per direction of Engineer Incharge ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 109 | Providing and fixing of Al Lugs 16sq mm (Sixteen square millimetre) to complete in all respects as per direction of Engineer Incharge Electrolyte grade aluminium with copper coating to protect from galvanic corrosion Make-Dowells/Bosch/ADR ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 110 | Providing and fixing of MS Nuts & Bolts of Various sizes(galvanised) as per ISO 4014 & ISO 4017 ,ISO 4032 & ISO 4033 to complete in all respects as per direction of Engineer Incharge ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 111 | Providing and fixing of Tinned copper Braid of size 50x6x1000mm (Fifty into six into one thousand millimetre) with end lugs to complete in all respects as per direction of Engineer Incharge Make- Megger/Baur/Doble( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 112 | Providing and fixing of Cleat for cable support to complete in all respects as per direction of Engineer InchargeMake- Megger/Baur/Doble ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 113 | Providing and fixing of Link Clips to complete in all respects as per direction of Engineer Incharge Make- Megger/Baur/Doble( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 114 | Providing and fixing of Danger Plate (MS Sheet 203X200X1.6mm) (Two hundred three into two hundred into one point six millimetre) to complete in all respects as per direction of Engineer Incharge ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 115 | Providing of SF6 Gas refilling kit with 9 kg (Nine kilogramme) sf 6 (six) gas to complete in all respects as per direction of Engineer Incharge Make-Vihan/Vencar/MIGFITT ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 116 | Providing of Oil test set(BDV) for dielectric strength of transformer oil Make-Motwane/Udayraj/Transpower complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 117 | Providing Portable LT-11KV cable fault locator Make- Megger/Baur/Doble complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 118 | Providing of Sky Lift (Utility grade ISUZU Chasis, 4x4, 9 mtr (four into four, nine metre) insulated working height Hydraulic system and RTO registration at HP) including 1 year ZD own damage= 3 year third party insurance (Sub Total D) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 119 | Shifting/Relocation of Electrical line(City ED)Providing and fixing of STP 8 mtr (eight metre) long to complete in all respects as per direction of Engineer Incharge ( as specified by HPSEBL norms) Make- Vikram Industries/Kaushal industries/Steel and metal tubes india Pvt ltd./Shivam Steel/Sun Electrical/Electro Steels (Note: Erection and Dismantling along with all accessories) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 120 | Providing and fixing of STP 9 mtr (Nine metre) long to complete in all respects as per direction of Engineer Incharge ( as specified by HPSEBL norms) Make- Vikram Industries/Kaushal industries/Steel and metal tubes india Pvt ltd./Shivam Steel/Sun Electrical/Electro Steels (Note: Erection and Dismantling along with all accessories) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 121 | Providing and fixing of STP 10 mtr (ten metre) long to complete in all respects as per direction of Engineer Incharge ( as specified by HPSEBL norms) Make- Vikram Industries/Kaushal industries/Steel and metal tubes india Pvt ltd./Shivam Steel/Sun Electrical/Electro Steels (Note: Erection and Dismantling along with all accessories) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 122 | Providing and fixing of STP 11 mtr (Eleven metre) long to complete in all respects as per direction of Engineer Incharge ( as specified by HPSEBL norms) Make- Vikram Industries/Kaushal industries/Steel and metal tubes india Pvt ltd./Shivam Steel/Sun Electrical/Electro Steels (Note: Erection and Dismantling along with all accessories) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 123 | Providing and fixing of Muffs (2000mm) (Two thousand millimetre) with concerete filling as per IS 458:2003 to complete in all respects as per direction of Engineer Incharge ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 124 | Providing and fixing of 11 KV , HT cable XLPE 3 CORE 240 SQ.MM (Two hundred forty square millimetre) ,Al to complete in all respects as per direction of Engineer Incharge Make - Havells/KEI/Polycab ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 125 | Providing and fixing of Distribution box 200 A( 5way bus bar 3phase) to complete in all respects as per direction of Engineer Incharge Make- Renit power/Havells/L&T ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 126 | Providing and fixing of X-Arm (Horizontal) - MS Channel Iron: 100X50x6 (One hundred into fifty into six), Length [600mm] (Six hundred millimetre) to complete in all respects as per direction of Engineer Incharge ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 127 | Providing and fixing of Stay Set (Mild Steel made) for LT to complete in all respects as per direction of Engineer Incharge ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 128 | Providing and fixing of Stay Set (Mild Steel made) for HT to complete in all respects as per direction of Engineer Incharge ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 129 | Providing and fixing of Stay Wire (7/3.15 mm) (Seven/three point one five millimetre) to complete in all respects as per direction of Engineer Incharge Make- Shark Steel/TCM/Partap wires ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 130 | Providing and fixing of LT AB Cable 95 mm2 (Ninety five square millimetre) to complete in all respects as per direction of Engineer Incharge Make - Havells/KEI/Polycab ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 131 | Providing and fixing of LT AB Cable 120 mm2 (One hundred twenty square millimetre) to complete in all respects as per direction of Engineer Incharge Make - Havells/KEI/Polycab ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 132 | Dismantaling of Electrical lineDismantling of LT overhead cable upto 35 mm2 (Thirty five square millimetre) and carriage to HPSEBL store compete in all respect as per direction of Engineer Incharge ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 133 | Dismantling of LT overhead cable 95 mm2 (Ninety five square millimetre) and carriage to HPSEBL store to complete in all respect as per direction of Engineer Incharge ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 134 | Dismantling of LT overhead cable 120 mm2 (One hundred twenty square millimetre) and carriage to HPSEBL store to complete in all respect as per direction of Engineer Incharge ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 135 | Dismantling of LT overhead cable 185 mm2 (One hundred eighty five square millimetre) and carriage to HPSEBL store to complete in all respect as per direction of Engineer Incharge ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 136 | Dismantling of HT 11KV (Eleven kilovolt) overhead cable 95-185 mm2 (Ninety five to one hundred eighty five square millimetre) and carriage to HPSEBL store, to complete in all respects as per the direction of Engineer Incharge (as specified by HPSEBL norms), complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge, including all incidentals. The rates are inclusive of octroi, royalty, malkana, toll tax, sales tax or other taxes imposed by the Government but excluding GST. |
| 137 | Stay Set Complete LT and carriage to HPSEBL store, complete in all respects as per the direction of Engineer Incharge (as specified by HPSEBL norms), complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge, including all incidentals. The rates are inclusive of octroi, royalty, malkana, toll tax, sales tax or other taxes imposed by the Government but excluding GST. |
| 138 | Stay Set Complete HT and carriage to HPSEBL store to complete in all respect as per direction of Engineer Incharge ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 139 | Stay Wire (7/3.15 mm) (Seven/three point one five millimetre) and carriage to HPSEBL store to complete in all respect as per direction of Engineer Incharge ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 140 | Dismantaling of STP 8/9 mtr (eight/nine metre) Long along with all accessories complete the job in all respect.and carriage to HPSEBL store to complete in all respect as per direction of Engineer Incharge ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 141 | Dismantaling of STP 10 mtr (Ten metre) Long along with all accessories complete the job in all respect.and carriage to HPSEBL store to complete in all respect as per direction of Engineer Incharge ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 142 | Dismenteling of STP 11 mtr (Eleven metre) Long along with all accessories complete the job in all respect.and carriage to HPSEBL store to complete in all respect as per direction of Engineer Incharge ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 143 | Dismantlling of ACSR 6/1/3.35 mm2 (Six/one/three point three five square millimetre) along with all accessories and then transportation to HPSEBL Store as per direction of Engineer Incharge ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 144 | Dismantlling of ACSR 6/1/4.72 mm2 (six/one/four point seven two square millimetre) along with all accessories and then transportation to HPSEBL Storeas per direction of Engineer Incharge ( as specified by HPSEBL norms) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 145 | JSV WORKSExcavation in foundation, trenches etc., in earth work, lift up to 1.50 metres (One point five zero metre), stacking the excavated soil not more than 3 metres (Three metres) clear from the edge of excavation and then returning the excavated soil in 15 cm. (Fifteen centimetre) layers, when required into plinth, side of foundation etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed within a lead of 20 metres (Twenty metres) in pick jumper work 50% each (Fifty percent each). The rates are inclusive of octroi, royalty, malkana, toll tax, sales tax or other taxes imposed by the Government but excluding GST. |
| 146 | Providing, Laying, jointing and testing in trenches (to level or grade) G.I. pipes of 150 mm Dia (One hundred fifty millimetre) (H/M class) conforming to IS:1239-2004 (Part - I) (latest up to date amendments) of grade and wall thickness as specified below, suitable to withstand required hydraulic test pressure in random length 4 m-6 m (Four to six metre) with plain ends. The laying of Pipes conform to IS 5822-1994 (IS Five thousand eight hundred eighty two-1994) and as per CPHEEO manual and will include all operations such as cutting, welding and jointing including flushing, cleaning and hydraulic testing complete in all respects to the entire satisfaction of Engineer-in-Charge including entire carriage of materials up to all leads and lifts. (Earth work in trenches, welding of flanges/butt welding will be measured and paid for separately) The rates are inclusive of octroi, royalty, malkana, toll tax, sales tax or other taxes imposed by the Government but excluding GST. |
| 147 | Providing, Laying, jointing and testing in trenches (to level or grade) G.I. pipes of 80 mm Dia (Eighty millimetre) (H/M class) conforming to IS:1239-2004 (Part - I) (latest up to date amendments) of grade and wall thickness as specified below, suitable to withstand required hydraulic test pressure in random length 4 m-6 m (Four to six metre) with plain ends. The laying of Pipes conform to IS 5822-1994 (IS Five thousand eight hundred eighty two-1994) and as per CPHEEO manual and will include all operations such as cutting, welding and jointing including flushing, cleaning and hydraulic testing complete in all respects to the entire satisfaction of Engineer-in-Charge including entire carriage of materials up to all leads and lifts. (Earth work in trenches, welding of flanges/butt welding will be measured and paid for separately) The rates are inclusive of octroi, royalty, malkana, toll tax, sales tax or other taxes imposed by the Government but excluding GST. |
| 148 | Providing, Laying, jointing and testing in trenches (to level or grade) G.I. pipes of 65 mm Dia (Sixty five millimetre) (H/M class) conforming to IS:1239-2004 (Part - I) (latest up to date amendments) of grade and wall thickness as specified below, suitable to withstand required hydraulic test pressure in random length 4 m-6 m (Four to six metre) with plain ends. The laying of Pipes conform to IS 5822-1994 (IS Five thousand eight hundred eighty two-1994) and as per CPHEEO manual and will include all operations such as cutting, welding and jointing including flushing, cleaning and hydraulic testing complete in all respects to the entire satisfaction of Engineer-in-Charge including entire carriage of materials up to all leads and lifts. (Earth work in trenches, welding of flanges/butt welding will be measured and paid for separately) The rates are inclusive of octroi, royalty, malkana, toll tax, sales tax or other taxes imposed by the Government but excluding GST. |
| 149 | Providing, Laying, jointing and testing in trenches (to level or grade) G.I. pipes of 50 mm Dia (Fifty millimetre) (H/M class) conforming to IS:1239-2004 (Part - I) (latest up to date amendments) of grade and wall thickness as specified below, suitable to withstand required hydraulic test pressure in random length 4 m-6 m (Four to six metre) with plain ends. The laying of Pipes conform to IS 5822-1994 (IS Five thousand eight hundred eighty two-1994) and as per CPHEEO manual and will include all operations such as cutting, welding and jointing including flushing, cleaning and hydraulic testing complete in all respects to the entire satisfaction of Engineer-in-Charge including entire carriage of materials up to all leads and lifts. (Earth work in trenches, welding of flanges/butt welding will be measured and paid for separately) The rates are inclusive of octroi, royalty, malkana, toll tax, sales tax or other taxes imposed by the Government but excluding GST. |
| 150 | Laying, jointing and testing in trenches (to level or grade) G.I. pipes of 150 mm Dia (One hundred fifty millimetre) (H/M class) conforming to IS:1239-2004 (Part - I) (latest up to date amendments) of grade and wall thickness as specified below, suitable to withstand required hydraulic test pressure in random length 4 m-6 m (Four to six metre) with plain ends. The laying of Pipes conform to IS 5822-1994 (IS Five thousand eight hundred eighty two-1994) and as per CPHEEO manual and will include all operations such as cutting, welding and jointing including flushing, cleaning and hydraulic testing complete in all respects to the entire satisfaction of Engineer-in-Charge including entire carriage of materials up to all leads and lifts. (Earth work in trenches, welding of flanges/butt welding will be measured and paid for separately). The rates are inclusive of octroi, royalty, malkana, toll tax, sales tax or other taxes imposed by the Government but excluding GST. |
| 151 | Providing Circumferential butt welded joints by electrical arc welding to GMSERW pipe grade as per IS 3183:2007 (IS Three thousand one hundred eighty three-2007) & GMS Pipe heavy and medium grade as per IS 1239:1990 (Part 1), welded in requisite number of weld runs so as to achieve the minimum effective throat thickness of weld conforming to IS 816-1969 (IS Eight hundred sixteen-1969) specifications, by using welding electrodes of 2.5 mm to 6.3 mm (Two point five to six point three millimetre) of Advani Oerlikon (Adore)-CITOJET/ES/ESAB make, conforming to IS 814-1991 (IS Eight hundred fourteen-1991), including Die Pentrant test, including fabrication, laying and jointing requisite number of MSERW/GMS bends at site of work 200 mm dia GMSERW IS/ISO 3183:2007 L210 or A T= 4.80 mm (Two hundred millimetre dia GMSERW IS/ISO Three thousand one hundred eighty three-2007 L210 or A T= Four point eight zero millimetre) complete in all respects, including manual/mechanical handling of pipes in all leads and lifts to the entire satisfaction of Engineer-In-Charge. The rates are inclusive of octroi, royalty, malkana, toll tax, sales tax or other taxes imposed by the Government but excluding GST. |
| 152 | Providing Circumferential butt welded joints by electrical arc welding to GMSERW pipe grade as per IS 3183:2007 (IS Three thousand one hundred eighty three-2007) & GMS Pipe heavy and medium grade as per IS 1239:1990 (Part 1), welded in requisite number of weld runs so as to achieve the minimum effective throat thickness of weld conforming to IS 816-1969 (IS Eight hundred sixteen-1969) specifications, by using welding electrodes of 2.5 mm to 6.3 mm (Two point five to six point three millimetre) of Advani Oerlikon (Adore)-CITOJET/ES/ESAB make, conforming to IS 814-1991 (IS Eight hundred fourteen-1991), including Die Pentrant test, including fabrication, laying and jointing requisite number of MSERW/GMS bends at site of work 100 mm dia GMSERW IS/ISO 3183:2007 L210 or A T= 4.80 mm (One hundred millimetre dia GMSERW IS/ISO Three thousand one hundred eighty three-2007 L210 or A T= Four point eight zero millimetre) complete in all respects, including manual/mechanical handling of pipes in all leads and lifts to the entire satisfaction of Engineer-In-Charge. The rates are inclusive of octroi, royalty, malkana, toll tax, sales tax or other taxes imposed by the Government but excluding GST. |
| 153 | Providing Circumferential butt welded joints by electrical arc welding to GMSERW pipe grade as per IS 3183:2007 (IS Three thousand one hundred eighty three-2007) & GMS Pipe heavy and medium grade as per IS 1239:1990 (Part 1), welded in requisite number of weld runs so as to achieve the minimum effective throat thickness of weld conforming to IS 816-1969 (IS Eight hundred sixteen-1969) specifications, by using welding electrodes of 2.5 mm to 6.3 mm (Two point five to six point three millimetre) of Advani Oerlikon (Adore)-CITOJET/ES/ESAB make, conforming to IS 814-1991 (IS Eight hundred fourteen-1991), including Die Pentrant test, including fabrication, laying and jointing requisite number of MSERW/GMS bends at site of work 150 mm Dia (One hundred fifty millimetre) complete in all respects, including manual/mechanical handling of pipes in all leads and lifts to the entire satisfaction of Engineer-In-Charge. The rates are inclusive of octroi, royalty, malkana, toll tax, sales tax or other taxes imposed by the Government but excluding GST. |
| 154 | Providing Circumferential butt welded joints by electrical arc welding to GMSERW pipe grade as per IS 3183:2007 (IS Three thousand one hundred eighty three-2007) & GMS Pipe heavy and medium grade as per IS 1239:1990 (Part 1), welded in requisite number of weld runs so as to achieve the minimum effective throat thickness of weld conforming to IS 816-1969 (IS Eight hundred sixteen-1969) specifications, by using welding electrodes of 2.5 mm to 6.3 mm (Two point five to six point three millimetre) of Advani Oerlikon (Adore)-CITOJET/ES/ESAB make, conforming to IS 814-1991 (IS Eight hundred fourteen-1991), including Die Pentrant test, including fabrication, laying and jointing requisite number of MSERW/GMS bends at site of work 80 mm Dia (Eighty millimetre) complete in all respects, including manual/mechanical handling of pipes in all leads and lifts to the entire satisfaction of Engineer-In-Charge. The rates are inclusive of octroi, royalty, malkana, toll tax, sales tax or other taxes imposed by the Government but excluding GST. |
| 155 | Providing Circumferential butt welded joints by electrical arc welding to GMSERW pipe grade as per IS 3183:2007 (IS Three thousand one hundred eighty three-2007) & GMS Pipe heavy and medium grade as per IS 1239:1990 (Part 1), welded in requisite number of weld runs so as to achieve the minimum effective throat thickness of weld conforming to IS 816-1969 (IS Eight hundred sixteen-1969) specifications, by using welding electrodes of 2.5 mm to 6.3 mm (Two point five to six point three millimetre) of Advani Oerlikon (Adore)-CITOJET/ES/ESAB make, conforming to IS 814-1991 (IS Eight hundred fourteen-1991), including Die Pentrant test, including fabrication, laying and jointing requisite number of MSERW/GMS bends at site of work 65 mm Dia (Sixty five millimetre) complete in all respects, including manual/mechanical handling of pipes in all leads and lifts to the entire satisfaction of Engineer-In-Charge. The rates are inclusive of octroi, royalty, malkana, toll tax, sales tax or other taxes imposed by the Government but excluding GST. |
| 156 | Providing Circumferential butt welded joints by electrical arc welding to GMSERW pipe grade as per IS 3183:2007 (IS Three thousand one hundred eighty three-2007) & GMS Pipe heavy and medium grade as per IS 1239:1990 (Part 1), welded in requisite number of weld runs so as to achieve the minimum effective throat thickness of weld conforming to IS 816-1969 (IS Eight hundred sixteen-1969) specifications, by using welding electrodes of 2.5 mm to 6.3 mm (Two point five to six point three millimetre) of Advani Oerlikon (Adore)-CITOJET/ES/ESAB make, conforming to IS 814-1991 (IS Eight hundred fourteen-1991), including Die Pentrant test, including fabrication, laying and jointing requisite number of MSERW/GMS bends at site of work 50 mm Dia (Fifty millimetre) complete in all respects, including manual/mechanical handling of pipes in all leads and lifts to the entire satisfaction of Engineer-In-Charge. The rates are inclusive of octroi, royalty, malkana, toll tax, sales tax or other taxes imposed by the Government but excluding GST. |
| 157 | Cutting of pipes 150 mm Dia (One hundred fifty millimetre) of any material, class, and diameter to exact required lengths, profiles, or angles as per site requirements and technical drawings, utilizing approved methods such as gas cutting (oxy-acetylene/plasma), mechanical blade cutting (hacksaw/band saw), abrasive wheel cutting, or specialized pipe-cutting equipment. Scope includes precise edge preparation (deburring, reaming, removing slag, square cutting, or beveling for welding/jointing) ensuring zero structural damage to the pipe. The rate shall be fully inclusive of all machinery, tools, tackles, industrial gases, blades, electricity/fuel charges, safety PPE, hot-work permits, and skilled/unskilled labor in strict compliance with relevant IS Codes (including IS 1239, IS 3589, IS 4984, IS 4985, and safety code IS 7969) and CPWD/HPSR Specifications. The rate also captures the complete liability of safe internal carriage, handling, and lead/lift of cut pipes and balance/surplus materials from the execution point to any designated location within the site premises, followed by systematic, stable stacking and complete housekeeping of the work area, to the absolute satisfaction and strict directions of the Site In-Charge. (Nothing extra shall be paid on account of variation in pipe cutting methods, multiple handling, leads, lifts, or site conditions.)The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 158 | Cutting of pipes 80 mm Dia (Eighty millimetre) of any material, class, and diameter to exact required lengths, profiles, or angles as per site requirements and technical drawings, utilizing approved methods such as gas cutting (oxy-acetylene/plasma), mechanical blade cutting (hacksaw/band saw), abrasive wheel cutting, or specialized pipe-cutting equipment. Scope includes precise edge preparation (deburring, reaming, removing slag, square cutting, or beveling for welding/jointing) ensuring zero structural damage to the pipe. The rate shall be fully inclusive of all machinery, tools, tackles, industrial gases, blades, electricity/fuel charges, safety PPE, hot-work permits, and skilled/unskilled labor in strict compliance with relevant IS Codes (including IS 1239, IS 3589, IS 4984, IS 4985, and safety code IS 7969) and CPWD/HPSR Specifications. The rate also captures the complete liability of safe internal carriage, handling, and lead/lift of cut pipes and balance/surplus materials from the execution point to any designated location within the site premises, followed by systematic, stable stacking and complete housekeeping of the work area, to the absolute satisfaction and strict directions of the Site In-Charge. (Nothing extra shall be paid on account of variation in pipe cutting methods, multiple handling, leads, lifts, or site conditions.)The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 159 | Cutting of pipes 65 mm Dia (Sixty five millimetre) of any material, class, and diameter to exact required lengths, profiles, or angles as per site requirements and technical drawings, utilizing approved methods such as gas cutting (oxy-acetylene/plasma), mechanical blade cutting (hacksaw/band saw), abrasive wheel cutting, or specialized pipe-cutting equipment. Scope includes precise edge preparation (deburring, reaming, removing slag, square cutting, or beveling for welding/jointing) ensuring zero structural damage to the pipe. The rate shall be fully inclusive of all machinery, tools, tackles, industrial gases, blades, electricity/fuel charges, safety PPE, hot-work permits, and skilled/unskilled labor in strict compliance with relevant IS Codes (including IS 1239, IS 3589, IS 4984, IS 4985, and safety code IS 7969) and CPWD/HPSR Specifications. The rate also captures the complete liability of safe internal carriage, handling, and lead/lift of cut pipes and balance/surplus materials from the execution point to any designated location within the site premises, followed by systematic, stable stacking and complete housekeeping of the work area, to the absolute satisfaction and strict directions of the Site In-Charge. (Nothing extra shall be paid on account of variation in pipe cutting methods, multiple handling, leads, lifts, or site conditions.)The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 160 | Cutting of pipes 50 mm Dia (Fifty millimetre) of any material, class, and diameter to exact required lengths, profiles, or angles as per site requirements and technical drawings, utilizing approved methods such as gas cutting (oxy-acetylene/plasma), mechanical blade cutting (hacksaw/band saw), abrasive wheel cutting, or specialized pipe-cutting equipment. Scope includes precise edge preparation (deburring, reaming, removing slag, square cutting, or beveling for welding/jointing) ensuring zero structural damage to the pipe. The rate shall be fully inclusive of all machinery, tools, tackles, industrial gases, blades, electricity/fuel charges, safety PPE, hot-work permits, and skilled/unskilled labor in strict compliance with relevant IS Codes (including IS 1239, IS 3589, IS 4984, IS 4985, and safety code IS 7969) and CPWD/HPSR Specifications. The rate also captures the complete liability of safe internal carriage, handling, and lead/lift of cut pipes and balance/surplus materials from the execution point to any designated location within the site premises, followed by systematic, stable stacking and complete housekeeping of the work area, to the absolute satisfaction and strict directions of the Site In-Charge. (Nothing extra shall be paid on account of variation in pipe cutting methods, multiple handling, leads, lifts, or site conditions.)The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 161 | Providing and Supplying of CI Sluice valve Leader/Kirloskar make of 150 mm Dia (One hundred fifty millimetre) with hand wheel as per IS : 14846 - 2000 (Class PN- 1.6) including brass spindle as per 2906-1984 complete with bolt nuts, rubber insertion etc. and as per direction and to the entire satisfaction of the Engineer In Charge . The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 162 | Providing and Supplying of CI Sluice valve Leader/Kirloskar make of 200 mm Dia (Two hundred millimetre) with hand wheel as per IS : 14846 - 2000 (Class PN- 1.6) including brass spindle as per 2906-1984 complete with bolt nuts, rubber insertion etc. and as per direction and to the entire satisfaction of the Engineer In Charge . The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 163 | Providing and Supplying of CI Sluice valve Leader/Kirloskar make of 100 mm Dia (One hundred millimetre) with hand wheel as per IS : 14846 - 2000 (Class PN- 1.6) including brass spindle as per 2906-1984 complete with bolt nuts, rubber insertion etc. and as per direction and to the entire satisfaction of the Engineer In Charge . The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 164 | Providing and Supplying of CI Sluice valve Leader/Kirloskar make of 80 mm Dia (Eighty millimetre) with hand wheel as per IS : 14846 - 2000 (Class PN- 1.6) including brass spindle as per 2906-1984 complete with bolt nuts, rubber insertion etc. and as per direction and to the entire satisfaction of the Engineer In Charge . The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 165 | Providing and Supplying of CI Sluice valve Leader/Kirloskar make of 65 mm Dia (Sixty five millimetre) with hand wheel as per IS : 14846 - 2000 (Class PN- 1.6) including brass spindle as per 2906-1984 complete with bolt nuts, rubber insertion etc. and as per direction and to the entire satisfaction of the Engineer In Charge . The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 166 | Providing and Supplying of CI Sluice valve Leader/Kirloskar make of 50 mm Dia (Fifty millimetre) with hand wheel as per IS : 14846 - 2000 (Class PN- 1.6) including brass spindle as per 2906-1984 complete with bolt nuts, rubber insertion etc. and as per direction and to the entire satisfaction of the Engineer In Charge . The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 167 | Providing and installation of house connections with 15 mm dia (Fifteen millimetre) GI pipe, 6 Rmtr. (Six running metre) (Light class) i/c 150 mm (One hundred fifty millimetre) nipple of 15 mm dia (Fifteen millimetre), GI socket, GI Union, GI elbow and 1/4\\" (One fourth inch) ferrule connection in all respect. The rates are inclusive of octroi, royalty, malkana, toll tax, sales tax or other taxes imposed by the Government but excluding GST. |
| 168 | Providing, Laying, Jointing and testing & Commissioning of GMSERW Pipe L210 or A grade L-290/210 grade confirming to IS 3183:2007 (IS Three thousand one hundred eighty three-2007) & GMS Pipe heavy & Medium Grade confirming to IS 1239:1990 (Part 1) at site in trenches bevelled ended BIS marked Pipe confirming to relevant codes & Specification its equivalent latest with up to date amendments of 200mm dia (Two hundred millimetre) GMSERW IS/ISO 3183:2007 (IS/ISO Three thousand one hundred eighty three:Two thousand seven) L210 (L-Two hundred ten) or A T= 4.80mm (Four point eight zero millimetre) with steel grade having wall thickness as mentioned below and capable of withstanding required test pressure as prescribed in BIS Code, in random lengths of 5.5 to 6.5 mtrs. (Five point five to six point five metres). The pipes ends shall be bevelled suitable for butt welding, including the cost of jointing with butt welding confirming to IS 816-1969 (IS Eight hundred sixteen-1969) or latest as applicable and with up to date amendments (leak proof) in three layers at site of work with welding rods of standard make & all allied accessories whatever required for welding at site, tail piece, tees neds & other special manufactured from parent pipes as applicable to the particular reach & of approved specifications as per site conditions and cutting of pipes wherever required as per site requirement i/c carriage in all leads and lifts as directed by Engineer-In-Charge. The Pipe shall have zinc coating inside & outside confirming to IS 4736-1986 (IS Four thousand seven hundred thirty six-1986) or latest with up to date amendments & shall be engraved with IS 3183-2007 (IS Three thousand one hundred eighty three-2007) for GMSERW pipe & 1239:1900 (Part 1) for GMS Pipe. The laying shall confirm to BIS 5822-1970 (BIS Five thousand eight hundred twenty two-1970) or latest with up to date amendments to the entire satisfaction of Engineer-In Charge (Earthwork, Butt Welded joint & Cost of MS Flanges @ 5% (Five percent) of length shall be measured and paid for separately) The rates are inclusive of octroi, royalty, malkana, toll tax, sales tax or other taxes imposed by the Government but excluding GST. |
| 169 | Providing, Laying, Jointing and testing & Commissioning of GMSERW Pipe L210 or A grade L-290/210 grade confirming to IS 3183:2007 (IS Three thousand one hundred eighty three-2007) & GMS Pipe heavy & Medium Grade confirming to IS 1239:1990 (Part 1) at site in trenches bevelled ended BIS marked Pipe confirming to relevant codes & Specification its equivalent latest with up to date amendments of 150mm dia (One hundred fifty millimetre) GMSERW IS/ISO 3183:2007 (IS/ISO Three thousand one hundred eighty three:Two thousand seven) L210 (L-Two hundred ten) or A T= 4.80mm (Four point eight zero millimetre) with steel grade having wall thickness as mentioned below and capable of withstanding required test pressure as prescribed in BIS Code, in random lengths of 5.5 to 6.5 mtrs. (Five point five to six point five metres). The pipes ends shall be bevelled suitable for butt welding, including the cost of jointing with butt welding confirming to IS 816-1969 (IS Eight hundred sixteen-1969) or latest as applicable and with up to date amendments (leak proof) in three layers at site of work with welding rods of standard make & all allied accessories whatever required for welding at site, tail piece, tees neds & other special manufactured from parent pipes as applicable to the particular reach & of approved specifications as per site conditions and cutting of pipes wherever required as per site requirement i/c carriage in all leads and lifts as directed by Engineer-In-Charge. The Pipe shall have zinc coating inside & outside confirming to IS 4736-1986 (IS Four thousand seven hundred thirty six-1986) or latest with up to date amendments & shall be engraved with IS 3183-2007 (IS Three thousand one hundred eighty three-2007) for GMSERW pipe & 1239:1900 (Part 1) for GMS Pipe. The laying shall confirm to BIS 5822-1970 (BIS Five thousand eight hundred twenty two-1970) or latest with up to date amendments to the entire satisfaction of Engineer-In Charge (Earthwork, Butt Welded joint & Cost of MS Flanges @ 5% (Five percent) of length shall be measured and paid for separately) The rates are inclusive of octroi, royalty, malkana, toll tax, sales tax or other taxes imposed by the Government but excluding GST. |
| 170 | Providing, Laying, Jointing and testing & Commissioning of GMSERW Pipe L210 or A grade L-290/210 grade confirming to IS 3183:2007 (IS Three thousand one hundred eighty three-2007) & GMS Pipe heavy & Medium Grade confirming to IS 1239:1990 (Part 1) at site in trenches bevelled ended BIS marked Pipe confirming to relevant codes & Specification its equivalent latest with up to date amendments of 100mm dia (One hundred millimetre) GMSERW IS/ISO 3183:2007 (IS/ISO Three thousand one hundred eighty three:Two thousand seven) L210 (L-Two hundred ten) or A T= 4.80mm (Four point eight zero millimetre) with steel grade having wall thickness as mentioned below and capable of withstanding required test pressure as prescribed in BIS Code, in random lengths of 5.5 to 6.5 mtrs. (Five point five to six point five metres). The pipes ends shall be bevelled suitable for butt welding, including the cost of jointing with butt welding confirming to IS 816-1969 (IS Eight hundred sixteen-1969) or latest as applicable and with up to date amendments (leak proof) in three layers at site of work with welding rods of standard make & all allied accessories whatever required for welding at site, tail piece, tees neds & other special manufactured from parent pipes as applicable to the particular reach & of approved specifications as per site conditions and cutting of pipes wherever required as per site requirement i/c carriage in all leads and lifts as directed by Engineer-In-Charge. The Pipe shall have zinc coating inside & outside confirming to IS 4736-1986 (IS Four thousand seven hundred thirty six-1986) or latest with up to date amendments & shall be engraved with IS 3183-2007 (IS Three thousand one hundred eighty three-2007) for GMSERW pipe & 1239:1900 (Part 1) for GMS Pipe. The laying shall confirm to BIS 5822-1970 (BIS Five thousand eight hundred twenty two-1970) or latest with up to date amendments to the entire satisfaction of Engineer-In Charge (Earthwork, Butt Welded joint & Cost of MS Flanges @ 5% (Five percent) of length shall be measured and paid for separately) The rates are inclusive of octroi, royalty, malkana, toll tax, sales tax or other taxes imposed by the Government but excluding GST. |
| 171 | Providing, Laying, Jointing and testing & Commissioning of GMSERW Pipe L210 or A grade L-290/210 grade confirming to IS 3183:2007 (IS Three thousand one hundred eighty three-2007) & GMS Pipe heavy & Medium Grade confirming to IS 1239:1990 (Part 1) at site in trenches bevelled ended BIS marked Pipe confirming to relevant codes & Specification its equivalent latest with up to date amendments of 80mm dia (Eighty millimetre) GMSERW IS/ISO 3183:2007 (IS/ISO Three thousand one hundred eighty three:Two thousand seven) L210 (L-Two hundred ten) or A T= 4.80mm (Four point eight zero millimetre) with steel grade having wall thickness as mentioned below and capable of withstanding required test pressure as prescribed in BIS Code, in random lengths of 5.5 to 6.5 mtrs. (Five point five to six point five metres). The pipes ends shall be bevelled suitable for butt welding, including the cost of jointing with butt welding confirming to IS 816-1969 (IS Eight hundred sixteen-1969) or latest as applicable and with up to date amendments (leak proof) in three layers at site of work with welding rods of standard make & all allied accessories whatever required for welding at site, tail piece, tees neds & other special manufactured from parent pipes as applicable to the particular reach & of approved specifications as per site conditions and cutting of pipes wherever required as per site requirement i/c carriage in all leads and lifts as directed by Engineer-In-Charge. The Pipe shall have zinc coating inside & outside confirming to IS 4736-1986 (IS Four thousand seven hundred thirty six-1986) or latest with up to date amendments & shall be engraved with IS 3183-2007 (IS Three thousand one hundred eighty three-2007) for GMSERW pipe & 1239:1900 (Part 1) for GMS Pipe. The laying shall confirm to BIS 5822-1970 (BIS Five thousand eight hundred twenty two-1970) or latest with up to date amendments to the entire satisfaction of Engineer-In Charge (Earthwork, Butt Welded joint & Cost of MS Flanges @ 5% (Five percent) of length shall be measured and paid for separately) The rates are inclusive of octroi, royalty, malkana, toll tax, sales tax or other taxes imposed by the Government but excluding GST. |
| 172 | Providing, Laying, Jointing and testing & Commissioning of GMSERW Pipe L210 or A grade L-290/210 grade confirming to IS 3183:2007 (IS Three thousand one hundred eighty three-2007) & GMS Pipe heavy & Medium Grade confirming to IS 1239:1990 (Part 1) at site in trenches bevelled ended BIS marked Pipe confirming to relevant codes & Specification its equivalent latest with up to date amendments of 65mm dia (Sixty five millimetre) GMSERW IS/ISO 3183:2007 (IS/ISO Three thousand one hundred eighty three:Two thousand seven) L210 (L-Two hundred ten) or A T= 4.80mm (Four point eight zero millimetre) with steel grade having wall thickness as mentioned below and capable of withstanding required test pressure as prescribed in BIS Code, in random lengths of 5.5 to 6.5 mtrs. (Five point five to six point five metres). The pipes ends shall be bevelled suitable for butt welding, including the cost of jointing with butt welding confirming to IS 816-1969 (IS Eight hundred sixteen-1969) or latest as applicable and with up to date amendments (leak proof) in three layers at site of work with welding rods of standard make & all allied accessories whatever required for welding at site, tail piece, tees neds & other special manufactured from parent pipes as applicable to the particular reach & of approved specifications as per site conditions and cutting of pipes wherever required as per site requirement i/c carriage in all leads and lifts as directed by Engineer-In-Charge. The Pipe shall have zinc coating inside & outside confirming to IS 4736-1986 (IS Four thousand seven hundred thirty six-1986) or latest with up to date amendments & shall be engraved with IS 3183-2007 (IS Three thousand one hundred eighty three-2007) for GMSERW pipe & 1239:1900 (Part 1) for GMS Pipe. The laying shall confirm to BIS 5822-1970 (BIS Five thousand eight hundred twenty two-1970) or latest with up to date amendments to the entire satisfaction of Engineer-In Charge (Earthwork, Butt Welded joint & Cost of MS Flanges @ 5% (Five percent) of length shall be measured and paid for separately) The rates are inclusive of octroi, royalty, malkana, toll tax, sales tax or other taxes imposed by the Government but excluding GST. |
| 173 | Providing, Laying, Jointing and testing & Commissioning of GMSERW Pipe L210 or A grade L-290/210 grade confirming to IS 3183:2007 (IS Three thousand one hundred eighty three-2007) & GMS Pipe heavy & Medium Grade confirming to IS 1239:1990 (Part 1) at site in trenches bevelled ended BIS marked Pipe confirming to relevant codes & Specification its equivalent latest with up to date amendments of 50mm dia (Fifty millimetre) GMSERW IS/ISO 3183:2007 (IS/ISO Three thousand one hundred eighty three:Two thousand seven) L210 (L-Two hundred ten) or A T= 4.80mm (Four point eight zero millimetre) with steel grade having wall thickness as mentioned below and capable of withstanding required test pressure as prescribed in BIS Code, in random lengths of 5.5 to 6.5 mtrs. (Five point five to six point five metres). The pipes ends shall be bevelled suitable for butt welding, including the cost of jointing with butt welding confirming to IS 816-1969 (IS Eight hundred sixteen-1969) or latest as applicable and with up to date amendments (leak proof) in three layers at site of work with welding rods of standard make & all allied accessories whatever required for welding at site, tail piece, tees neds & other special manufactured from parent pipes as applicable to the particular reach & of approved specifications as per site conditions and cutting of pipes wherever required as per site requirement i/c carriage in all leads and lifts as directed by Engineer-In-Charge. The Pipe shall have zinc coating inside & outside confirming to IS 4736-1986 (IS Four thousand seven hundred thirty six-1986) or latest with up to date amendments & shall be engraved with IS 3183-2007 (IS Three thousand one hundred eighty three-2007) for GMSERW pipe & 1239:1900 (Part 1) for GMS Pipe. The laying shall confirm to BIS 5822-1970 (BIS Five thousand eight hundred twenty two-1970) or latest with up to date amendments to the entire satisfaction of Engineer-In Charge (Earthwork, Butt Welded joint & Cost of MS Flanges @ 5% (Five percent) of length shall be measured and paid for separately) The rates are inclusive of octroi, royalty, malkana, toll tax, sales tax or other taxes imposed by the Government but excluding GST. |
| 174 | Providing and welding MS Flanges @ 5% (Five percent) of joints, conforming to 200mm dia (Two hundred millimetre) GMSERW IS/ISO 3183:2007 (IS/ISO Three thousand one hundred eighty three:Two thousand seven) L210 (L-Two hundred ten) or A T= 4.80mm (Four point eight zero millimetre) FT 5 (Five) tables as per IS 6392-1971 (IS Six thousand three hundred ninety two-One thousand nine hundred seventy one) (latest with up to date amendments) with plain end GMSERW pipe in requisite number of layers on both faces to make the joint leak proof (The cost of providing and laying of MSERW pipes to be measured and paid for separately). The welding of flanges should conform to IS 816:1969 (IS Eight hundred sixteen:One thousand nine hundred sixty nine) with electrodes as per IS 814-1991 (IS Eight hundred fourteen-One thousand nine hundred ninety one) and required number of nuts and bolts conforming to IS 1364 (IS One thousand three hundred sixty four) including cost of gasket sheet, nuts & bolts. The thickness of gasket sheet not less than 3.00 mm (Three point zero zero millimetre) conforming to IS 2712-1998 (IS Two thousand seven hundred twelve-One thousand nine hundred ninety eight). The work shall be done to the entire satisfaction of Engineer-In-Charge within all leads and lifts. The rates are inclusive of octroi, royalty, malkana, toll tax, sales tax or other taxes imposed by the Government but excluding GST. |
| 175 | Providing and welding MS Flanges @ 5% (Five percent) of joints, conforming to 150mm dia (One hundred fifty millimetre) GMSERW IS/ISO 3183:2007 (IS/ISO Three thousand one hundred eighty three:Two thousand seven) L210 (L-Two hundred ten) or A T= 4.80mm (Four point eight zero millimetre) FT 17 (Seventeen) tables as per IS 6392-1971 (IS Six thousand three hundred ninety two-One thousand nine hundred seventy one) (latest with up to date amendments) with plain end GMSERW pipe in requisite number of layers on both faces to make the joint leak proof (The cost of providing and laying of MSERW pipes to be measured and paid for separately). The welding of flanges should conform to IS 816:1969 (IS Eight hundred sixteen:One thousand nine hundred sixty nine) with electrodes as per IS 814-1991 (IS Eight hundred fourteen-One thousand nine hundred ninety one) and required number of nuts and bolts conforming to IS 1364 (IS One thousand three hundred sixty four) including cost of gasket sheet, nuts & bolts. The thickness of gasket sheet not less than 3.00 mm (Three point zero zero millimetre) conforming to IS 2712-1998 (IS Two thousand seven hundred twelve-One thousand nine hundred ninety eight). The work shall be done to the entire satisfaction of Engineer-In-Charge within all leads and lifts. The rates are inclusive of octroi, royalty, malkana, toll tax, sales tax or other taxes imposed by the Government but excluding GST. |
| 176 | Providing and welding MS Flanges @ 5% (Five percent) of joints, conforming to 100mm dia (One hundred millimetre) GMSERW IS/ISO 3183:2007 (IS/ISO Three thousand one hundred eighty three:Two thousand seven) L210 (L-Two hundred ten) or A T= 4.80mm (Four point eight zero millimetre) FT 17 (Seventeen) tables as per IS 6392-1971 (IS Six thousand three hundred ninety two-One thousand nine hundred seventy one) (latest with up to date amendments) with plain end GMSERW pipe in requisite number of layers on both faces to make the joint leak proof (The cost of providing and laying of MSERW pipes to be measured and paid for separately). The welding of flanges should conform to IS 816:1969 (IS Eight hundred sixteen:One thousand nine hundred sixty nine) with electrodes as per IS 814-1991 (IS Eight hundred fourteen-One thousand nine hundred ninety one) and required number of nuts and bolts conforming to IS 1364 (IS One thousand three hundred sixty four) including cost of gasket sheet, nuts & bolts. The thickness of gasket sheet not less than 3.00 mm (Three point zero zero millimetre) conforming to IS 2712-1998 (IS Two thousand seven hundred twelve-One thousand nine hundred ninety eight). The work shall be done to the entire satisfaction of Engineer-In-Charge within all leads and lifts. The rates are inclusive of octroi, royalty, malkana, toll tax, sales tax or other taxes imposed by the Government but excluding GST. |
| 177 | Providing and installation of house connections with 15 mm (Fifteen millimetre) dia GI pipe, 6 Rmtr. (Six running metre) (Light class) i/c 150 mm (One hundred fifty millimetre) nipple of 15mm (Fifteen millimetre) dia, GI socket, GI Union, GI elbow and 1/4\\" (One fourth inch) ferrule connection in all respects. The rates are inclusive of octroi, royalty, malkana, toll tax, sales tax or other taxes imposed by the Government but excluding GST. |
| 178 | Providing and laying cement concrete 1:3:6 (One cement:Three sand:Six graded stone aggregate 40mm (Forty millimetre) nominal size and curing complete, excluding the cost of formwork in foundation and plinth in all leads and lifts. The rates are inclusive of octroi, royalty, malkana, toll tax, sales tax or other taxes imposed by the Government but excluding GST. |
| 179 | Providing and laying cement concrete 1:1.5:3 (One Cement : One point five sand : Three graded stone aggregate 20mm (Twenty millimetre) nominal size) and curing complete, excluding the cost of form work & reinforcement for reinforced concrete work in Foundation, footing, bases of columns & the like & the mass concrete complete in all respects as per the direction and to the entire satisfaction of Engineer-in-Charge. The rates are inclusive of octroi, royalty, malkana, toll tax, sales tax or other taxes imposed by the Government but excluding GST. |
| 180 | Providing and laying cement concrete 1:1.5:3 (One Cement : One point five sand : Three graded stone aggregate 20mm (Twenty millimetre) nominal size) and curing complete, excluding the cost of form work & reinforcement for reinforced concrete work in Wall (any thickness, but not less than 0.10 mtr. (Zero point one zero metre) thickness), attached pilasters, buttresses, plinth & string courses etc. from top of foundation level to floor two level complete in all respects as per the direction and to the entire satisfaction of Engineer-in-Charge. The rates are inclusive of octroi, royalty, malkana, toll tax, sales tax or other taxes imposed by the Government but excluding GST. |
| 181 | Providing and laying cement concrete 1:1.5:3 (One Cement : One point five sand : Three graded stone aggregate 20mm (Twenty millimetre) nominal size) and curing complete, excluding the cost of form work & reinforcement for reinforced concrete work in Suspended floors, roofs, landings and shelves and their supports, balconies, beams, griders bressumers and cantilevers upto floor two level complete in all respect as per the direction and to the entire satisfaction of Engineer-incharge.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government but excluding GST. |
| 182 | Providing formwork with steel plates 3.15mm (Three point one five millimetre) thick welded with angle iron frame 30 x 30 x 5mm (Thirty into thirty into five millimetre) so as to give a fair finish, including centring, shuttering, strutting & propping etcetera with wooden battens and ballies, height of propping & centring below supporting floor to ceiling not exceeding 4mtr. (Four metre) & removal of same for insitu reinforced concrete and plain concrete work in Flat surfaces such as soffits & suspended floors, roofs, landing and the like. Floor etc. up to 200mm (Two hundred millimetre) in thickness complete in all leads and lifts and as per the direction and to the entire satisfaction of the Engineer-in-Charge. The rates are inclusive of octroi, royalty, malkana, toll tax, sales tax or other taxes imposed by the Government but excluding GST. |
| 183 | Providing formwork with steel plates 3.15mm (Three point one five millimetre) thick welded with angle iron frame 30 x 30 x 5mm (Thirty into thirty into five millimetre) so as to give a fair finish, including centring, shuttering, strutting & propping etcetera with wooden battens and ballies, height of propping & centring below supporting floor to ceiling not exceeding 4mtr. (Four metre) & removal of same for insitu reinforced concrete and plain concrete work in Vertical surfaces such as walls (any thickness), partition and the like including attached pilasters, buttresses, plinth and string courses and the like. complete in all leads and lifts and as per the direction and to the entire satisfaction of the Engineer-in-Charge. The rates are inclusive of octroi, royalty, malkana, toll tax, sales tax or other taxes imposed by the Government but excluding GST. |
| 184 | Providing formwork with steel plates 3.15mm (Three point one five millimetre) thick welded with angle iron frame 30 x 30 x 5mm (Thirty into thirty into five millimetre) so as to give a fair finish, including centring, shuttering, strutting & propping etcetera with wooden battens and ballies, height of propping & centring below supporting floor to ceiling not exceeding 4mtr. (Four metre) & removal of same for insitu reinforced concrete and plain concrete work in Edges of slabs and breaks in floors and walls under 20 cm (Twenty centimetre) wide in all leads and lifts. complete in all leads and lifts and as per the direction and to the entire satisfaction of the Engineer-in-Charge. The rates are inclusive of octroi, royalty, malkana, toll tax, sales tax or other taxes imposed by the Government but excluding GST. |
| 185 | Applying cement slurry on R.C.C slab or C.C work using 2.75 k.g. (Two point seven five kilogramme) of cement per sqm of floor area before laying cement concrete flooring including roughening of concrete surfaces complete within all leads and lifts as per direction of Engineer-in-Charge. The rates are inclusive of octroi, royalty, malkana, toll tax, sales tax or other taxes imposed by the Government but excluding GST. |
| 186 | Providing and fixing SFRC Manhole frame of internal size with frame of 560mm (Five hundred sixty millimetre) internal dia (Medium duty). The weight of cover & frame should not be less than 58 kg. (Fifty eight kilogrammes) complete within all leads and lifts. The rates are inclusive of octroi, royalty, malkana, toll tax, sales tax or other taxes imposed by the Government but excluding GST. |
| 187 | Providing, laying, jointing and testing of Ductile Iron Spigot & socketed pipe with cement mortar lining on inner pipe jointed with push-on joint including cost of all kinds of fitting such as sockets, SBR gaskets, bends and fixing complete. The pipe should be as per IS:8329-2000 (IS:Eight thousand three hundred twenty nine-Two thousand) Class K7 (Class K Seven) in a random length of 4 to 7 mtrs. (Four to seven metres) Ductile iron pipe 150mm (One hundred fifty millimetre) dia with wall thickness dimensions and test pressure conforming to IS:8329-2000 (IS:Eight thousand three hundred twenty nine-Two thousand) jointed with S.B.R. gasket Tyton push-on joint within all leads and lifts and to the entire satisfaction of Engineer-in-Charge (Earthwork to be measured and paid for separately). The rates are inclusive of octroi, royalty, malkana, toll tax, sales tax or other taxes imposed by the Government but excluding GST. |
| 188 | Providing and installation of house connections with 110mm (One hundred ten millimetre) dia PVC pipe, 6 RMT (Six running metre) including all accessories (bends etc.) in all respects. The rates are inclusive of octroi, royalty, malkana, toll tax, sales tax or other taxes imposed by the Government but excluding GST. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysOct 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender