Tender For Provision Of Parking Shed For 04 X Rdr special Veh With Hardstanding At Unit Eqpt Park Under Ge (South) Ambala Cantt.
Tender Value
9.68 Lakhs
Estimated cost
Bid Submission
21 Oct 2026
18 days left
EMD
19372
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ambala → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Parking Shed For 04 X Rdr special Veh With Hardstanding At Unit Eqpt Park Under Ge (South) Ambala Cantt.
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in post holes (or similar holes) each not exc 0.50 and Cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in any type of soil complete all as specified and directed by Engineer-in-Charge. |
| 2 | Material and labour for PCC 1:3:6 type C2 by (using 40 mm well graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed by Engineer-in-Charge |
| 3 | Supply and fixing rolled mild steel sections as in main and cross beams,hip and jack rafters, purline where connected to common rafters and running rails and guides for sliding doors fixd with angle cleats or other connecting plates of Fe-410W (Gde-E-250) complete all as specified and directed by Engineer-in-Charge |
| 4 | Supply and fixing steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 Grade St-240 complete all as specified and directed by Engineer-in-Charge |
| 5 | Material and labour for plates (plain and chequered) channels, square cut or notched ( ordinary and counter sunk) forming holes without any attachment of Fe-410W(Gde-E-250) quality A complete all as specified and directed by Engineer-in-Charge. |
| 6 | Material and labour for two coat of synthetic enamel paint over a coat of red oxide primer on steel surface including preparation of surface over 10cm width or girth complete all as specified and directed by Engineer-in-charge. |
| 7 | Supply and fixing Pre - painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge. |
| 8 | Supply and fixing Pre - painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any color having tensile strength of 550 Mpa as in ridge portion , fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge. |
| 9 | Material and labour for 75mm thick plain cement concrete 1:4:8 type D2(using 40mm graded stone aggregates) as in sub base complete all as specified and directed by Engineer-in-Charge. |
| 10 | Material and labour for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engineer-in-Charge |
| 11 | Material and labour for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 80mm thickness in grey cement and pigment with glossy finish, M-40 Grade complete all as specified and directed by Engr-in-Charge. |
| 12 | Material and labour for pre-cast concrete block as in Kerb Stone (Machine made) with solid blocks Type B1, 1:2:4 (20mm graded stone aggregate) exc 10 cm in width and setting in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge |
| 13 | Material and labour for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in coppings, benching, kerbs, edges etc including necessary form work complete all as specified and directed by Engr-in-Charge. |
| 14 | NOTE:- Amount of credit of Rs. 0.00 for retrieved materials is mentioned in Schedule of Credit Page No 21 & 22 of tender documents in pdf form which will be deducted offline while acceptance of tender. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysOct 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender