Tender For Provision Of Single Officers And Jco Living Accn At Hattigor Under Ge Rangia
Tender Value
27.66 Lakhs
Estimated cost
Bid Submission
27 Oct 2026
9 days left
EMD
55320
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baksa → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Single Officers And Jco Living Accn At Hattigor Under Ge Rangia
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 10-Oct-2026 | Date Corrigendum | Date | 27-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed. |
| 2 | Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in soft/loose soil complete all as specified and as directed. |
| 3 | M&L PCC (1:4:8) type E-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed. |
| 4 | M&L for Reinforced cement concrete M25 (design mix) using 20mm graded stone aggregate for foundation, rafts, footings, foundation beams, plinth beams, bases for columns etc. basement slabs, and mass concrete complete all as specified and as directed. |
| 5 | M&L for Reinforced cement concrete M25 (design mix) using 20mm graded stone aggregate as in columns, pillars, piers, posts and struts complete all as specified and as directed. |
| 6 | M&L Reinforced cement concrete M25 (design mix) using 20mm graded stone aggregate as in Lintel/Tiebeams, cantilevers, brussummers over 1.5m span complete all as specified and as directed. |
| 7 | Material and labour for Brickwork with sub class 'B' (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and as directed. |
| 8 | M&L Brick work with sub-class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed. |
| 9 | M&L Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 10 | All as per item no 9 herein-before but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed. |
| 11 | Material and labour for rendering 15 mm thick (10+5) in two layers on fair faces of brick work or concrete surfaces , in cement and sand mortar 1:4 using water liquid water proofing compound @ 200 ml per bag of cement or as per manufacturer's instructions, top surfaces finished fair and even without using extra cement complete all as specified and as directed.Note: WPC shall be apply in second layer and measured and paid separately. |
| 12 | Material and labour for rendering 10 mm thick in cement and sand mortar 1:6 on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement complete all as specified and as directed. |
| 13 | Supply only liquid water proofing compound conforming to relevant IS complete all as specified and as directed. |
| 14 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and as directed. |
| 15 | Removing excavated material to a distance n.exc 50M and depositing where directed at a level n.exc 1.50M above the starting point complete all as specified and as directed. |
| 16 | Use and waste form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundations and plinth, lintel beams, and similar work, vertical or to batter for rough finished surfaces complete all as specified and as directed. |
| 17 | Use and waste form work to sides and soffits of floor or roof beams, copings beam haunchings, chajjas etc for fair finished flat concrete surfaces complete all as specified and as directed. |
| 18 | Use and waste form work to sides of pillars, posts, struts, piers, columns and stanchions for rough finished flat surfaces of concrete complete all as specified and as directed. |
| 19 | M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces complete all as specified and as directed. |
| 20 | M&L two coats of acrylic distemper over a coat of primer on newly plastered walls over 3 mm putty, pilasters, cornices, etc necessary preparation of surfaces complete all as specified and as directed. |
| 21 | M&L for Sand filling under floors or in foundation including watering and consolidation complete all as specified and as directed. |
| 22 | M&L hard core of gauge n.exc 63 mm broken stone spread & levelled in layer n.exc 15 cm thick watered & rammed to a true surface complete all as specified and as directed. |
| 23 | M&L for virified Ceramic tiles 10 mm thick (square/rectangular) polished dark shade, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layers in CM 1:4 complete all as specified and as directed. |
| 24 | M&L coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over 15 mm thick screed bed or bedding layers in CM 1:6 complete all as specified and as directed. |
| 25 | M&L coloured Glazed ceramic tiles 350 x 450 x 7 mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over 15 mm thick screed bed or bedding layers in CM 1:4 complete all as specified and as directed. |
| 26 | M&L for vitrified Ceramic tiles 10 mm thick (square/rectangular) polished dark shade, area of each tile not exc 0.36 sqm as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete including 10mm thick back coat 1:4 set complete all as specified and as directed. |
| 27 | Supply and fix solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS wire tube supplied and fixed in opening as per specification and drawing complete all as specified and as directed. |
| 28 | Supply and fix factory made solid panelled PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rail MS frame shall be covered with heat moulded plain colour PVC's channel having PVC sheet strip of 20mm wide stuck inside with solvent cement for styles and plain colour PVC sheets for top rail lock rail and bottom rail on either side and as gap for top rail and bottom rail panelling of plain colour PVC sheet to be fitted to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame including butt hinges and plaster the surface and painting etc at site as per specification and drawing complete all as specified and as directed. |
| 29 | Factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 30 | Factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat of size 100 x 65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 31 | Supply & Fixing Factory Made single extruded WPC (Wood Polymer Composite) Solid Plain flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (suspension grade), Calcium Carbonate and natural fibers (Wood Powder / Rice husk / Wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (face) & 900 N (Edge), minimum compressive strength of 50 N/sqmm, modulus of elasticity 850N/Sqmm and resistance to spread of flame of class A category with property of being termite/borer proof, water moisture proof and fire retardant, including Supply & Fixing of 02 Nos (per Leaf) Stainless Steel 150mm long Tower Bolt conforming to IS 15833-2009 and including S&F of 02 Nos. (per Leaf) Stainless Steel 150mm long handle conforming to IS 208-2020 and 300mm Stainless Steel sliding door bolt 12mm dia with and including a minimum of 6 carriage bolts and nuts four on bolt plate and two on staple plate and fixed conforming to IS 15834-2008 including taking down of existing shutter complete all specified and directed by Engineer-in-charge. |
| 32 | Supply & Fixing Factory Made 30mm thick Solid PLAIN WPC (Wood polymer Composite) Wiremesh Door Shutter of required size comprising of virgin PVC resin of K Value 57-60 (Suspension rade), calcium Carbonate and natural fibers (Wood Powders/ rice husk/ wheat husk) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded (Inner) with having minimum density not less than 650 kg/cum, having good screw holding capacity (Screw Withdrawal strength of 2000 N (Face) & 1100 N (Edge), Minimum Compressive of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/Borer Free, Water/Moisture Proof and Fire Retardant. For fixing Mosquito mesh and XTN aluminium mesh together on panel area of door except stiles and rails to be paneled with and including mesh with self-tapping round headed screws at required distance, screws and edges covered with feathered edge beading all-around of mesh and fixing stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws with and including 03 Nos door Stainless steel butt hinges 100mm long with Stainless steel screws for each, 02 Nos stainless steel barrel tower bolts of extrude section, 180mm long (ISI marked) conforming to IS 15833-2009, 2 Nos stainless steel handles, 125 mm long (ISI marked conforming to IS 208-2020), 01 No. of helical door spring of 300 mm length including taking down of existing shutter complete all as specified and directed by Engineer-in-charge. Note: 1. Material test certificate of all the items and authentication should be compulsorily provided by the manufacturing company 2. The rate of 03 Nos door Stainless steel butt hinges 100mm long with Stainless steel screws for each, 02 Nos stainless steel barrel tower bolts of extrude section, 150mm long (ISI marked), 2 Nos stainless steel handles, 125 mm long (ISI marked), 01no. of helical door spring of 300 mm length is inclusive in this item and nothing shall be paid extra on this item. 3 The rate of taking down of existing shutter complete all specified and directed by Engineer-in-charge is included in this item and nothing shall be paid extra on this account. 4 The rate of Mosquito mesh and XTN aluminium mesh is included in this item and nothing shall be paid extra on this account. |
| 33 | Materials and Labour for mid steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-O or Fe 310-O complete all as specified and directed. |
| 34 | S & F butt hinges 100 mm long medium weight, cold rolled mild steel complete all as specified and as directed. |
| 35 | S&F extruded aluminium alloy handles, fabricated type anodised 150mm long, complete all as specified and as directed. |
| 36 | S&F aluminium anodised, barrel tower bolts of extruded section 200 mm long complete all as specified and as directed. |
| 37 | Providing & Fixing of UPVC glazed 3 track-2 panel sliding windows with mesh made out of multi chambered uPVC sections with TPE gaskets having isolated drainage and reinforced with Galvanized iron profiles throughout the window. The outer frame having an overall size of 108 x 48 mm with reinforcement of 1.2mm thickness and sash with overall size of 38 x 61 mm with reinforcement of 1.2 mm thickness mesh sash of overall size 38 x 58mm Fiber mesh reinforced with GI. Glazing bead for fixing of glass shall be of size 16.19mm and TPV gasket. Windows will be provided with 5mm plain float glass, and stainless steel wire mesh with hardware with Logo & Single point locking system of flush lock. Wall thickness of frame & sash shall be 2-2.2mm complete all as specified and as directed. |
| 38 | S&F anodised aluminium snap grid frame work for false ceiling all as specified complete all as specified and as directed. |
| 39 | S&F hangers 6mm dia GI (up to 1200 mm length) fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia. 40 mm long complete all as specified and as directed. |
| 40 | S&F Gypsum board 12 mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and as directed. |
| 41 | S&F MS steel work in tubular trusses including special shaped washers etc., complete using butt ERW or induction butt welded tubes with one shop coat of zinc chromate primer paint complete all as specified and as directed. |
| 42 | M&L for preparation of new steel surfaces exceeding 10cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed. |
| 43 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated/Semicorrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 44 | S&F Pre-painted galvalume aluminium zince coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 45 | M&L 300x300x25mm thick prepolished cement concrete chequered tiles jointed in neat cement slurry and pointed in white or coloured cement to match the floor and including 25mm thick screed bed in CM 1:4 and incl removal of old and necessary demolition and complete all as specified and as directed. |
| 46 | S & F in repair vitreous china wash down water closet (Pedestral pattern) EWC (Combo type) while incl plastic water closet seat cover and mild steels chromium plated on aluminium hinging device and connecting to 'P' or 'S' incl connecting flush pipe with flushing cistern complete all as specified and as directed. |
| 47 | S&F in wash basins, vitreous China thin rim table top basin including cutting for and pinning in ends of brackets or erecting stand incl supply and fixing of waste couplings, waste pipe complete all as specified and as directed. |
| 48 | Supply and fix 15 mm bore fancy type single lever Basin mixer chromium plated cast copper alloy with capstan head, long screwed shanks complete all as specified and as directed. |
| 49 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect complete all as specified and as directed. |
| 50 | S&F 2 in 1 bib tap (CP) 15 mm bore cast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass ferrule complete all as specified and as directed. |
| 51 | M&L for PVC waste pipe 32 mm dia flexible with cup to fit wash hand basin waste coupling in repair complete all as specified and as directed. |
| 52 | S&F 15mm bore stop valve, fancy type chromium plated screwed down high pressure with clutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. |
| 53 | S&F PVC connections 15mm size with PTMT nuts of length 300mm complete all as specified and as directed. |
| 54 | S&F Cast iron nahani trap (100mm), with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 55 | S&F in Grating doom 150 mm dia with waste hole of PTMT. (Minimum weight 100gms) complete all as specified and as directed. |
| 56 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC Building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 57 | S&F toilet paper holder with flat recessed type stainless steel complete all as specified and as directed. |
| 58 | S&F brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges all complete as specified and as directed. |
| 59 | S&F 110mm PVC (SWR) 'P' trap complete all as specified and as directed. |
| 60 | S&F 15mm Unplasticised PVC pipes of pressure rating 10 kgf/cm2 laid in trenches all complete all as specified and as directed. |
| 61 | S&F 20mm Unplasticised PVC pipes of pressure rating 10 kgf/cm2 laid in trenches all complete all as specified and as directed. |
| 62 | S&F 110mm dia PVC bend any radius complete all as specified and as specified and as directed. |
| 63 | Supply and fix 75mm dia PVC bend any radius complete all as specified and as directed. |
| 64 | S & F PVC (SWR) bends of any radius with access door bore of pipe 110 mm complete all as specified and as directed. |
| 65 | S & F PVC (SWR) junction single(single T) equal or unequal with access door bore of pipe 110 mm complete all as specified and as directed. |
| 66 | S & F PVC (SWR) reducers 110 mm complete all as specified and as specified and directed. |
| 67 | S&F 110 mm dia PVC (SWR) pipes any length and in any position (with clamps in wall) complete all as specified and as directed. |
| 68 | S&F PVC (SWR) bends 110 mm dia with access door complete all as specified and as directed. |
| 69 | M&L in errection of two staging walls with double stable of standard size of height upto 10' all as SSR specifications as per drawing NO RNG/ TD/ 37 sheet NO 1/1 for PVC tank complete all as specified and as directed. |
| 70 | S&F Rotational moulded polyethylene water storage tanks of 1000 litres (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed. |
| 71 | S&F Ball brass valves of 20mm bore, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed. |
| 72 | M&L 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in sub base of flooring/ hard standing/pavings/plinth protections, finished even and smooth without using extra cement complete all as specified and as directed. |
| 73 | M&L in 40mm thick Damp proof course using wpc with cement concrete 1:2:4, type B-0, to horizontal or vertical surfaces including necessary formwork (wpc to be measured separately) complete all as specified and as directed. |
| 74 | S&F roller blinds of 100% polyester blackout fabrics of weight of 310 g/m^2 (+-5%) having a fabric thickness of 0.45mm (+- 0.05) and very high tearing strength with roller mechanism and aluminium channel. Color and pattern to be decided as per direction of Engineer in Charge, and making good the disturbed surfaces complete all as specified and as directed. |
| 75 | M&L granite (any type) slab 20 mm thick laid with 10mm thick CM 1:4 as in bedded in floor/wall and top of partition wall and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing all as specified and as directed. |
| 76 | S&F in repair, Aluminium Die cast body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed. |
| 77 | S&F in repairs brass chromium plated wall mixer for mixing hot & cold water screwed down for 15mm bore iron pipe complete all as specified and as directed. |
| 78 | S&F in repair double legged door stopper of size 150mm of aluminium alloy with rubber complete all as specified and as directed. |
| 79 | M&L for point wiring with 1.5 sqmm size (nominal area) PVC insulated unsheathed single core multi stranded FRLSH copper conductor cable drawn into and including PVC concealed (wall only) conduit and conduit accessories accessories and fittings like bends, elbow, crosses, etc. with PVC round block and PVC terminal boxes with 3.00mm thick laminated sheet cover for mounting fittings like; switches, sockets, fan regulator, etc. incl 1.5 sqmm size PVC insulated multistranded FRLSH copper conductor cable as earth continuity conductor and connected to earth dolly for one light/ fan/ exhaust fan/ bell point controlled by one 1-way switch/ bell push, complete all as per specified and as directed. |
| 80 | All as per Item No. 78 here-in-above, but for One 3 pin socket outlet, 5 Amps on the same board, complete all as specified and as directed by Engineer-in-charge. |
| 81 | All as per Item No. 78 here-in-above, but for One 3 pin socket outlet, 5 Amps, independent board, complete all as specified and as directed by Engineer-in-charge. |
| 82 | All as per Item No. 78 here-in-above, but for One 3/5 pin socket outlet, 15 Amps, independent board, with cables 4 sq. mm size, complete all as specified and as directed by Engineer-in-charge. |
| 83 | S&F Modular Switch, One Module, 1-Way, 10 Amps, 240 Volt, conforming to IS and connecting up, complete all as specified and as directed. |
| 84 | S&F Modular Switch, One Module, 1-Way, 20 Amps, 240 Volt, conforming to IS and connecting up, complete all as specified and as directed. |
| 85 | S&F Modular Socket, 3 Pin, combined, Two Module, 10 Amp, 240 Volt, conforming to IS and connecting up, complete all as specified and as directed. |
| 86 | S&F Modular Socket, 2/3 Pin, combined, Two Module, 20 Amp, 240 Volt, conforming to IS and connecting up, complete all as specified and as directed. |
| 87 | S&F Modular stepped type electronic fan regulator, Two module, 240V, AC, complete all as specified and as directed. |
| 88 | S&F Lamp holder Modular, PVC/Polycarbonate type complete all as specified and as directed. |
| 89 | S&F of ceiling rose surface backelite three terminals, PVC/ polycarbonate, insulated body, complete all as specified and as directed. |
| 90 | S&F Modular bell push 6A 1 module complete all as specified and as directed. |
| 91 | S&F Bell Buzzer Ding Dong AC. 230 volts single pole complete all as specified and as directed. |
| 92 | S&F modular cover plate (white) with frame, 3-module, complete all as specified and as directed. |
| 93 | S&F modular cover plate (white) with frame, 6-module, complete all as specified and as directed. |
| 94 | S&F modular cover plate (white) with frame, 8-module, complete all as specified and as directed. |
| 95 | S&F surface and wall mounted LED tube light fitting 1x 20W, (4 Feet) with aluminium housing & integrated electronic driver, 6500K, 220-240 Volts, AC decorative box type with and including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to fitting, complete all as specified and as directed. |
| 96 | S&F slim square panel LED luminaire with frame 600 mm x 600 mm, white powder coated with CRCA housing, 35/36 watt, 220-240 V, AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cables of suitable size, complete all as specified and as directed. |
| 97 | S&F LED tube light fittings mirror type with high output diffuser 10 Watt, (2 Feet) 220V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor complete all as specified and as directed. |
| 98 | S&F in-repair of 10 watt capacity, B-22 base LED Bulb/ lamp (cool white/ warm white), complete all as specified and as directed. |
| 99 | S&F Indoor Wall Lamp for living and Bed room B-22 Light complete all as specified and as directed. |
| 100 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and as directed. |
| 101 | S&F of exhaust fan, metal body, heavy duty, AC single Phase, 230V, 50 Hz, RPM 1200, Copper winding of size 300mm sweep with, blades, frame and louvers including connecting up with three core flexible copper cables of suitable size, complete all as specified and as directed by Engineer-in-charge. |
| 102 | Supply and fix Sheet metal enclosure for AC connection with a two pin and earth plug socket complete with one single pole MCB upto 32 Amps,240 volts 50HZ,breaking capacity 10KA,C series complete all as specified and as directed. |
| 103 | S&F of Sheet Metal Enclosure MCB DB SPN, 12 way 415 volt, with 200 amps rated Bus-bar, Double door type MCB DB suitable for mounting incoming and outgoing MCBs of any type, complete all as specified and as directed. |
| 104 | S&F MCB Single Pole & Neutral (SPN), 'C' Curve, 32 Amps, 240 Volt for fixing on MCB DB's, 10 KA, 50 Hz, conforming to IS/IEC 60898, connecting up and testing, complete all as specified and as directed. |
| 105 | S&F MCB Single Pole (SP), 'C' Curve, 6-32 Amps, 240 Volt for fixing on MCB DB's, 10 KA, 50 Hz, conforming to IS/IEC 60898, connecting up and testing, complete all as specified and as directed. |
| 106 | S&F Energy saving new generation environmental friendly long life versatile pressure die cast aluminium housing and heat resistant, IP 66 street light fitting luminaire with high power LEDs as light source and electronic driver of capacity 35 watts with pre wired and lens embedded PC cover having Top opening seperate driver compartment, with impact and corrosion resistant including thermal management in multiple optics and necessary mounting arrangements/ fixing bracket, complete all as specified and as directed by Engineer-in-charge. |
| 107 | Supply, install and testing of ISI marked steel body BEE 5 star rated water heater with copper inner tank, storage type, vertical, electrically operated single phase 50Hz, 2KW heating element, of 25 Ltr capacity with safety valve, thermostate, NRV, Anchor fastner-04 Nos. of suitable size, including necessary drilling, fixing arrangements, with and including provision of 15mm dia PVC Connection pipe of 450mm long (02 Nos), complete all as specified and as directed. |
| 108 | M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel, protected by GI pipe 15 mm bore (light grade) and watering pipe 20 mm bore GI pipe (light grade) and chamber and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excavation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PT 1, 1991 with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switches, DBs) including taking down old unserviceable one, complete all as specified & testing on completion. NOTE:- (i) item includes the cost of 7.5 mtr length GI pipe for protection for GI earth wire. (ii) item rates includes the cost of 7.5 mtr GI earth wire. |
| 109 | M&L for sand filling under floors or in foundations spreading and levelling in layers not exc. 25 cm thick including watering and consolidation or Sand Cushioning (dry) in trenches/ducts for protection of UG Cables (below, above and around the UG Cable laid in Trenches) of 230mm Spread thickness (8 Cm in depth before laying the Cable and 15 Cm in depth after laying the Cable) and consolidated (punned) upto 180mm thickness, complete all as per specified and as directed by Engineer-in-charge. NOTE : For the purpose of Payment, Punned thickness of Sand Cushioning only will be measured and paid for. |
| 110 | Supply & Laying Sub-Class B Bricks, well burnt, laid breadth wise along the length of cable laid in trenches over sand cushion laid for UG cable protection, complete all as specified and as directed by Engineer-in-charge. |
| 111 | Supply & laying in-replacement of LT XLPE insulated cable, sheathed, screened, PVC bedded, Galvanised Steel Strip or Wire armoured, Electic Power Cable (heavy duty) with Aluminium Conductor, 1100 Volts grade, cross-sectional area 16 Sqmm 2 Core, laid in Pipe/ Ducts/ Trenches/ under Floor/ under Road/ fixing on pole/ above floor including Testing, complete all as specified and as directed by Engineer-in-charge. NOTE : Earthworks, Sand Cushioning, Bricks, GI Pipe, etc. will be measured and paid under appropriate Items. |
| 112 | M&L moon (opal), decorative gate light made up high grade unbreakable polycorbonate material suitable for 7W LED lamp complete all as specified and as directed. |
| 113 | S&F of Galvanised Iron Pipe 50mm bore (dia) ‘light grade’ for protection of UG Cable, laid under Floors or Road Crossing, fixing to Pole with and including Mild Steel Clamps, Nuts, Bolts, etc., complete all as specified and as directed by Engineer-in-charge. |
| 114 | S&F in-repair of 1100 volts grade heavy duty cable PVC insulated aluminium stranded conductor of, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular of 4.0 Sqmm section, complete all as specified and as directed by engineer-in-charge. |
| 115 | M&L for 32mm dia (Outer) 3- layer PP-R (Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply with all PP-R plain & brass threaded fittings laid in trenches, complete all as specified and as directed by Engineer-in-charge. |
| 116 | S&F of 40mm dia PP-R Gate valves (brass insert), complete all as specified and as directed by Engineer-in-charge. |
| 117 | M&L for Making connection of PP-R distribution branch with PP-R main of 50 to 75mm dia by providing and fixing tee including cutting and making fusion joint etc., complete all as specified and as directed by Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 10, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 27, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 9 daysOct 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysNov 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender