Tender For special Repair Wk To Bldg No T-23 (G And F Store) Of 389 (I) And special Repair/Replacement Of Overhead Lt Electric Line With Underground Cable At Kv School Haldwani At Mil Stn Haldwani Under Ge Ranikhet
Tender Value
23.57 Lakhs
Estimated cost
Bid Submission
20 Oct 2026
16 days left
EMD
47150
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nainital → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair Wk To Bldg No T-23 (G And F Store) Of 389 (I) And special Repair/Replacement Of Overhead Lt Electric Line With Underground Cable At Kv School Haldwani At Mil Stn Haldwani Under Ge Ranikhet
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling plain or corrugated steel sheeting, any gauge, thickness as in roof coverings. |
| 2 | S&F prepainted aluminium zinc corrugated steel sheet (galvalume base) or thinknee 0.50mm having tensile strength of 550 MPA , in colour and to be facotry moulded as in roof covering /cladding and fixed with self tapping screws /self drilling serews, to suit the roofing in customized colour matching with the colour of roofing and screws are to be fixed using torque adjustable electronic gun screws drills of suitable capacity complete all as specified. |
| 3 | Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 4 | S&F Plain, galvanised, mild steel sheeting 0.63 mm thk, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed |
| 5 | Dismantling wrought iron or mild steel work of any description not otherwise provided for |
| 6 | S&F framed work such as grills,gratings, etc with ends of bars shouldered and / or riveted or forged into spikes; framed guard ; barred iron doors; ladders , tank stahging; framed balusters; walk ways; railing and simillar work Con-forming to Fe 290 Gde E-165. |
| 7 | Dismantling timber scantlings 40 sq. cm and over in section, in any position. |
| 8 | M&L Rolled sections channel angle Tee section and in tubular section as in main and cross beams, hip and jack rafters; purlins,post where connected to common rafters and running rails and embbeded in concrete complete . |
| 9 | M&L for two coats of synthetic enamel painting over a coat of red oxide zinc chrome primer on steel surfaces over 10cm width or girth including preparation of surface complete. |
| 10 | Demolition of brick work built in cement work complete. |
| 11 | M&L for brick work with sub class `B’ bricks, straight on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed. |
| 12 | Taking down cement plaster on brick or stone walls etc raking out joints hacking for key scrabbing down water etc complete. |
| 13 | M&L for 15mm thick cement plaster in CM (1:4) on fair faces of brick or concrete surfaces using WPC where ever required as per manufacturerer's instructions and finishing the surface even and smooth (without using extra cement) etc. complete all as specified NOTE -WPC shall be measured and paid separetely. |
| 14 | Supply only WPC complete all as specified and directed. |
| 15 | M&L for rendering 15mm thick on fair faces of brick work in CM 1:6 finished even and smooth without using extra cement complete. |
| 16 | M&L for 2mm thick wall care putty on new plastered surfaces of wall, and apply two coat of exterior emulsion paint (Apex) over a coat of primer complete all as specified and directed |
| 17 | M&L Preparing new plastered or unplastered surfaces of walls and applying 2mm thick wall care putty in two layers and two coats of distemper oil emulsion, white or tinted over a coat of alkali resistant primer, complete all as specified and directed |
| 18 | Taking down chowkats or frames n.exc 1.50 sqm each with shutters (without taking off shutters from the frames) complete. |
| 19 | -–ditto- all asper item no 18 here-in-before but exc 1.50 sqm but n.exc 4.00sqm each. |
| 20 | Supply & fixing Steel windows with side hung shutters including box type hinge with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed. |
| 21 | -ditto- all as per item No. 21 herein before but without glazing bars complete all as specified. |
| 22 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed |
| 23 | S&F Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane 3.00 mm thick complete all as specified and directed. |
| 24 | S&F Pressed steel frames for doors of size 125 x 60mmwith one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, as per direction of Engineer-in-Charge |
| 25 | M&L for PCC 1:3:6 type C-1(using 20mm graded stone agg) for bed block for fixing hold fast, filling of pressed steel frame complete all as specified. |
| 26 | M&L Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 27 | S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panesls, commercial type on bothe sides complete all as specified and as directed. |
| 28 | M&L for 0.9mm thick decorative laminate type 1 of surface finish, colour and patters as approved, fixed with approved adhesive as per manufacturer's insturctions, complete all as specified. |
| 29 | S&F harrison mild steel tubular curtain rail of anodised aliminium alloy finish of 25mm dia incl six nos curtain ring per running mtr and one number of brackets on each end and one no of globe on each end of the rod per opening of door / window (make and materail approved by Engineer-in-charge) complete all as specified and directed. |
| 30 | S&F Aluminium alloy, anodised, sliding door bolt with haps, staple (bolt type) and fixing clips with sheet, cast and extruded section and fixing bolt and sliding bolt of extuded sections or cast aluminium alloy and fixed 250 mm long complete all as specified and as directed. |
| 31 | S&F 150 mm overall length floor stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed |
| 32 | S & F aluminium handle, cast type anodized 150mm size. |
| 33 | S & F 150 mm long aluminium anodized barrel tower bolts of extruded section lcomplete all as specified and as directed. |
| 34 | S&F butt hinges medium weight cold rolled mild steel of 100mm long complete all as specified and directed. |
| 35 | Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness (below or above ground level). |
| 36 | M&L for 25mm thick PCC 1:2:4 type B-0 (12.5mm graded stone aggregate) as in level course with finshining in cement concrete surface even and rough to receive screed bed complete |
| 37 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over screed bed of 20 mm thick 1:6 and pointed in white or coloured cement to match complete all as specified and directed by Engineer-in-Charge. |
| 38 | M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with ditto as per item 10 above with back coat of 10 mm thick 1:6 and pointed in white or coloured cement to match complete all as specified and directed by Engineer-in-Charge. |
| 39 | M&L for 75mm thick cement concrete 1:3:6 type C-2 using 20mm graded agg as in plinth protection incl all necessary form work & finishing surface even & smooth using extra cement complete all as specified and as directed. |
| 40 | M&L for providing PCC 1:2:4 type B-0 as in roof kerbs or mud stops rouded or chamfered on edges, saucer drain, coping (using 12.5mm graded stone aggregate) complete all as specifed and directed. |
| 41 | Dismantling of wall and ceiling boards (fiber, pulp, insulation etc,) or insulation boards/slabs/blankets, any thickness including cover fillet complete all as specified and directed. |
| 42 | S & F for Aluminium anodised snap grid frame work for false ceiling comprising of following section for making partitions of 600 X 600 mm size fixed to walls with rawl plugs and screws and hang to roof with s 6 mm dia. G.I. (upto1200mm length) adjusting levelfixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners12.5mm dia. 40mm long complete all as specified. size of main tee shall be :-(i)37mmx24mmx0.3mm thick, (ii)Cross Tee 28mmx24mmx0.3mm thick and (iii)Wall angle 24mmx24mmx0.3mm thick. |
| 43 | S & F 4 mm thick non asbestos fiber designer ceiling (E-board classic) board / tiles for insulation and accoustic purpose, 595 X 595 mm size fixed in ceiling with and including dusting of surface complete all as specified and directed |
| 44 | Surface Excavation in hard/dense soil n,exc 30cm deep and averaging 15cm deep and getting out complete all as specified and directed. |
| 45 | Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness (below or above ground level). |
| 46 | M&L 75 mm thick cement concrete 1:4:8 type D-2 finished fair and even as in sub base Complete all as specified and directed. |
| 47 | M & L for 15 mm thick screed bed or bedding layer in CM 1:6 to receive floor finishes complete all as specified and directed. |
| 48 | M&L for chequred cement concrete tiles of size 300x300x25 mm thick coloured rubber pressed glossy finish, set and jointed in neat cement slurry and pointed in white or colour cement and match the surace of tiles as foor/staps, complete as all specified and directed. |
| 49 | M&L for Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 80 mm thickness M-40 Grade |
| 50 | M&L for Sand filling under floors or in foundations including watering and consolidation |
| 51 | M & L for providing plain cement concrete type B-1, 1:2:4 (using 20 mm graded crushed stone aggregate) as in benching,coping, bed block for embedding hold fasts, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed. |
| 52 | Removing Excavated soil exceeding 250 M but not exceeding 500 M and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and directed. |
| 53 | Supply, install, testing and commissioning and testing factory made and tested (including CPRI type test certified) LT feeder pillar box (KIOSK) out door type, floor mounted,compartmantalised and IP-65 suitable for 415 Volts 3 phase 4 wire, 50 Hz AC supply system, all as specified and directed, having bus bar chamber. The panel shall be dust and vermin proof, made of 3.15mm CRCA MS sheet and with base frame of 40x40x6mm angle iron , powder coated, having front and rear openiable hinged double door shuters with aprons for cable entry and locking arrangement complete :- Incoming (a) MCCB 250 amps, 4 pole, 35 KA, with adjustable thermal over load release with earth fault protection. 50 Hz, 415 volts grade - 1 No, Make:Havells (Cat No. IHLLSECFO250)-01 No (b) Bus bar electrolytic grade copper and supported on Non-hygroscopic, non carbonising, corrosion resistance SMC insulators 200Amp, 4 pole, not less than 30cm long mounted on insulators for incomming supply 01 No. (c) Neon indicating lamps (R, Y & B) -01` Set. Outgoing (a) MCCB 100 amps, 4 pole,25 KA, with adjustable thermal over load release with earth fault protection. 50 Hz, 415 volts grade - 3 Nos, Make:Havells (Cat Part No IHLASF0100) (b) Neon indicating lamp RYB set for all outgoing ( Qty of set as provided in above item) Note- (i) Rate quoted is deemed to be inclusive of PCC foundation/pedestrian and connected earth work. (ii) Panels shall be placed above 0.6 mtr of ground level (iii) Outgoing MCCBs shall be fed with solid busbar connectors. (iii) Cables shall be terminated using through Cable end Joints as per Cap or size of cable. |
| 54 | Supply, install, commissioning and testing factory made cubical outdoor type floor mounted LT Panel board IP-65 suitable for 415 volts 3 phase 4 wire AC supply system having bus bar chamber with insulated aluminium bus bar 300 amps rating installed on porcelain insulator and dust/vermin proof and made out of 16 SWG CRCA suitable size with MS sheet 3.15 mm thick and 50x50x6mm thick angle frame work, front opening type 1.5x1.5x0.35m duly painted with two coats of powder coated paint over a coat of red oxide metal primer incl internal wiring in the panel with PVC insulated multi stranded copper conductor IS-694 marked 1100 volts not less than 2.5 Sqmm all as specified and directed. The scope of work shall also includes provisioning of the following :- A. Incoming :- (a) MCCB 4 Pole , 415 volts grade 100 Amps- 01 No B. Outgoing (Adjustable settings) :-(a) MCB DP 63 Amp - 05 Nos |
| 55 | Excavation in trenches n.exc 1.5 metre wide and n.exc 1.5 metre in depth for foundation etc or for shafts, wells, cess pits, manholes, pier holes, laying cables errection of poles / struts/stays etc n.exe 10 Sqm on plan not exceeding 1.5 metre in depth and getting out in any type of soil. |
| 56 | Returning, filling incl spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/dense soil all as specified and directed. |
| 57 | Removing excavated material (soil) not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed. |
| 58 | M&L for laying of bricks subclass ‘B’ old size laid flat perpendicular to the direction of cable for protection of cable complete all as specified. |
| 59 | M&L for dry clean sand filling in trenches below and around under ground cable cushioning complete all as specified and directed.. Note :- Thickness of sand cushioning shall be measured after punning. |
| 60 | M & L for Supplying, laying, connecting and testing in trenches, under floors/ roads or on walls Cable XLPE insulated screened PVC bedded galvanized steel strips or wire armored, electric power cables (heavy duty) ISI marked with stranded aluminium conductor, 1100 volts grade, of size following sizes :- (a ) 120 Sqmm 3.5 Core |
| 61 | (b) 50 sqmm, 3 1/2 core |
| 62 | (c) 25 sqmm, 4 core |
| 63 | (d) 10 sq mm 2core |
| 64 | M&L earthing complete as per electrical plate No. 3 of MES SSR Part-I with galvanised steel earth plate electrode 60cmx60cmx6.0mm thick, buried directly vertically in ground in a pit of depth not less than 2.25 metres below ground level with top edge of earth plate at a depth not less then 1.5 metre below normal ground level connected to and including galvanised iron earth strip 32mm x 6mm by means of bolts, nuts check nuts and washers of galvanised iron. Earthing strip shall be protected by galvanised iron or steel pipe 40 mm bore light grade and connected to continuous earth strip on test point. Watering pipe shall be 20 mm bore GI medium grade. The earthing shall be of inclusive of excavation & earth work in any type of soil, charcoal, salt, funnel PCC pit and RCC cover complete all as specified & directed followed by painting the earth test result at appropriate place. |
| 65 | Dismantling old existing road light coventional type and S & F LED street light 60W all as directed by Engineer in charge Make equivlent conductor of any type/size for reuse or to be diposite to MES store yard all as directed by Engr-in-Charge. |
| 66 | Dismantling old existing ACSR conductor of any type/size all as directed by Engr-in-Charge. |
| 67 | Dismantling old existing GI earth wire of any size complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysOct 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender