Tender For Renovation, Repainting, And Civil Repair Works At Lhcd Extension, Rf-Icrh Shed, Magnet Hall Terrace, And Miscellaneous Areas Inside Ipr C Us, Bhat, Gandhinagar -382428.
Tender Value
12.82 Lakhs
Estimated cost
Bid Submission
04 Nov 2026
5 days left
EMD
25652
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ahmedabad → Gujarat
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation, Repainting, And Civil Repair Works At Lhcd Extension, Rf-Icrh Shed, Magnet Hall Terrace, And Miscellaneous Areas Inside Ipr C Us, Bhat, Gandhinagar -382428.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil |
| 2 | Centering and shuttering including strutting, propping etc. and removal of form work for :Foundations, footings, bases for columns |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 4 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 5 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 6 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - incharge. |
| 7 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 8 | Providing and constructing BRICK MASONRY in cement mortar as per mixes stipulated below using approved well burnt bricks of \\"CLASS DESIGNATION\\" (Classification as per I.S.1077-1986) as specified below, including raking out joints 10mm deep wherever required, curing, etc; complete at all lead and lifts all as per specifications (The mix ratio specified is for cement : coarse sand) USING BRICKS OF CLASS DESIGNATION \\"3.5\\"(Minimum Average Compressive strength not less than 3.5 N/sqmm) In foundation and plinth in cement mortar 1:6. Price includes fixing of chair bracket/rag bolt into masonary Complete all as directed by EIC. |
| 9 | Cement plaster 1:3 (1 cement : 3 course sand) finished with a floating coat of neat cement 20 mm cement plaster.Note:-Including Scaffolding, curing etc. |
| 10 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 11 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.60mm (base metal of minimum 0.52mm thickness with total coating thickness of 0.08mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required, providing of silicon weather proofing sealant at all joints of roofing and cladding sheet. |
| 12 | Providing and fixing precoated galvanised iron profile sheets in existing curved profile / shape (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.60mm (base metal of minimum 0.52mm thickness with total coating thickness of 0.08mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required, providing of silicon weather proofing sealant at all joints of roofing and cladding sheet. |
| 13 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of:Asbestos cement sheet |
| 14 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.New /old work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm, complete in all respect as per the direction of Engineer-in-Charge. Note:- Rates includes scaffolding, surface preparation(Removing oil, grease if any), crack opening and filling with approved filler material (filling cracks - SBR polymer with cement as per manufacturers specification). The paint coefficient will be 1.00 irrespective of applying on plain / sand face plaster / brick surface. No extra measurement will be paid for painting on rough or sand face plaster or brick surface with groove. Complete all as directed by EIC |
| 15 | Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge.Note - 1. Item to be applicable in urban areas having directions for restricted hours for movement / plying of load carrying motor vehicle of 3.5 cum or more.2. Voids @20% for solids and 50% for rock shall be dedcuted from fully loaded truck measurement to arrive at the net quantity for payment in case of direct measurement is not possible.3. The cost is inclusive of necessary permisiion from statutory authorities for dumping the debris/excess earth outside department premises |
| 16 | Providing Casual labour for cleaning of vegetation at the site and other miscellaneous works as per the direction of engineer in charge. |
| 17 | Providing and Applying two coats of Synthetic enamel paint on old doors and windows, MS members using 1st quality paint from approved manufacturer of approved colour and shade to give an even shade including scaffolding, removing of old existing paint that is soft, blistered, loose or flanking & cleaning old surface, preparing the surface to receive paint including filling cracks and creaves with Putty or other approved filler materials, applying oil primer coats / anti corrosive zinc based yellow primer to steel work. cost also includes thinner, filler, putty, primer and other materials, necessary labours etc. complete as directed by Engineer in charge at all heights, in all floors.Note:- Measurements of doors and windows will be taken as per relevant IS code. Surface area of all MS Members will be taken for measurement (1) Synthetic enamel Paint of approved brand (2) Zinc based yellow Primer (3) Putty suitable to Mild steel members of approved brand (4) Putty on wood work - oil base putty. |
| 18 | Taking out existing old damage RCC slab/block from various places of laid over cable trenches and stacking by manual/mechanical means at designated locations including removal of rubbish etc., disposal of unserviceable material to the dumping ground and stacking of serviceable material within 100 metre lead as per direction of Engineer-in-Charge. |
| 19 | White washing with lime (Two or more coats) to give an even shade to the surface, The work also involves Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete:Note:-White washing with lime includes required material like fevicol/adhesive, indigo etc. as per manufacturers specifications. |
| 20 | Providing, fabricating, assembling, hosting / erecting and fixing in position at all heights / all levels / all floors / all shapes and sizes with all leads and lifts structural steel works In stringers, treads, landings etc. of stair cases, angle, channel including use of chequered plate wherever required, all complete as per detailed drawing and design including cutting, wastage, welding, bending (shop at site), hoisting, drilling, fixing in position, bolting wherever necessary, in position welding of required lengths, griding, finishing edges, filling the welded spots with paint, grouting in the RCC members including priming all the sections with one coat of zinc based yellow primer including preparing the surface, Scaffolding, Required size of anchor etc., complete at any heights/levels all as per instructions, specifications and as directed by Engineer – in – Charge (only standard measurements will be paid) |
| 21 | Providing Welder(skilled) with helper for miscellaneous MS repairing, fence repairing etc. within IPR Campus as directed by EIC.Note:- Any consumable material required will be provided by the institute However tools and tackles should be available with them. |
| 22 | Providing and fixing up to floor five level precast cement concrete string or lacing courses, copings, Trench cover slab, drain cover slab, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, etc., including hoisting and setting in position with cement mortar 1:2 (1 Cement : 2 coarse sand), cost of required Centering and shuttering complete 1:1.5:3 (1 cement : 1.5 coarse sand(zone-II) derived from natural sources : 3 graded stone aggregate 10 / 20 mm nominal size derived from natural sources) and providing 4 Nos. PVC sleeve of approx length 100 mm in each slab for placing 16 mm dia bar for hooks as required etc including cost of transportation, laying on cable trench, leveling if required, curing at all leads & lift, all complete as per direction of Engineer-in-Charge. Please Enable Macros to View BoQ information |
| 23 | Providing and fixing up to floor five level precast cement concrete string or lacing courses, copings, Trench cover slab, drain cover slab, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, etc., including hoisting and setting in position with cement mortar 1:2 (1 Cement : 2 coarse sand), cost of required Centering and shuttering complete 1:1.5:3 (1 cement : 1.5 coarse sand(zone-II) derived from natural sources : 3 graded stone aggregate 10 / 20 mm nominal size derived from natural sources) and providing 4 Nos. PVC sleeve of approx length 100 mm in each slab for placing 16 mm dia bar for hooks as required etc including cost of transportation, laying on cable trench, leveling if required, curing at all leads & lift, all complete as per direction of Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender